glass bead gun with atomizing air
Transcription
glass bead gun with atomizing air
P90 GLASS BEAD GUN WITH ATOMIZING AIR This gun is equipped with a hardened steel closing piston. It can be fed with glass beads either by gravity or from a pressurized tank. It has two inputs for beads. CONNECTIONS: Opening air Atomizing air Ø passage of beads BEAD NOZZLE: Ø 6 to 14 mm 1/4 ’’ 3/8 ” 18.5 mm AIR NOZZLE: Ø 2 mm DIFFUSER The gun is equipped with an adjustable (orientation and width) diffuser to spread the glass beads equally over a wide line up to 30 cm. It has a stiffening plate in carbide to increase its lifetime. This can be easily replaced when it wears out. The diffuser can be equipped with a glass bead sensor to avoid having a line without glass beads. This sensor is connected to an electronic device, which manages the gun(s) in action and the alarms (on request). RECOMMENDATIONS •Block the suction tube when feeding by pressurized tank •For air connection, use rather a Ø 8 mm hose •Use an opening air pressure of 6 bar (87 psi) SPECIFICATIONS Dimensions: Weight: WITHOUT DIFFUSER 240 x 100 mm 2.2 kg WITH DIFFUSER 350 x 100 mm 2.9 kg Edwin Kamber SA reserves the right to change at any time this information www.kambersa.ch II 2G c T6 0314 8416A 8327 8416A 8311 9507 6626 8403 9504 6640 8322 9510 4033 18133 8407 9500 9566 2027 8404 9508 9501 8307B 8324 2017 7004 8573 8318 8059 4033 9509 2026 9510 2024 8325 2063 9526 KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch Schéma 1 0314 9503 9535* 9506 9564 9566 9502 6712 9505 2047 8062 9566 4003 8058 640 *Indiquer N° ou Ø *Indicate no. or Ø *Indicar n.° o Ø *Nr. oder Ø angeben KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch Schéma 2 0314 7515A 2026 9514 9515AL 4515N 2026 9514 KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch 4515N Diffuseurs 1 0314
Documents pareils
glass bead gun with atomizing air
line up to 30 cm. It has a stiffening plate in carbide to increase its lifetime. This can be easily replaced when it wears out.
The diffuser can be equipped with a glass bead sensor to avoid having...