glass bead gun with atomizing air

PH84
GLASS BEAD GUN WITH ATOMIZING AIR
This gun is equipped with a hardened steel closing piston. It can be fed with glass beads either by gravity or from a
pressurized tank.
CONNECTIONS:
Opening air Atomizing air
Ø passage of beads
BEAD NOZZLE:
Ø 5 to 10 mm
1/4 ’’
3/8 ”
11.5 mm
AIR NOZZLE:
Ø 0.8 to 2.5 mm
DIFFUSER
The gun is equipped with an adjustable (orientation and width) diffuser to spread the glass beads equally over a wide
line up to 30 cm. It has a stiffening plate in carbide to increase its lifetime. This can be easily replaced when it wears out.
The diffuser can be equipped with a glass bead sensor to avoid having a line without glass beads. This sensor is connected
to an electronic device, which manages the gun(s) in action and the alarms (on request).
RECOMMENDATIONS
•Block the suction tube when feeding by pressurized tank
•For air connection, use rather a Ø 8 mm hose
•Use an opening air pressure of 6 bar (87 psi)
SPECIFICATIONS
Dimensions:
Weight:
WITHOUT DIFFUSER
230 x 90 mm
1.7 kg
WITH DIFFUSER
340 x 90 mm
2.6 kg
Edwin Kamber SA reserves the right to change at any time this information
www.kambersa.ch
II 2G c T6
0314
8416A
8327
8311
6626 8404
6640
2027
4033
8300
8407
8059A
4033
2063
2004
8403
8322
8416A
2024
8325
8326
8410
2026
8318
8401
8307
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
8324
9510
7004
2017
Schéma 1
0314
8304
*Indiquer N° ou Ø
*Indicate no. or Ø
*Indicar n.° o Ø
*Nr. oder Ø angeben
4404F
6712
8335*
8303
2047
4003
8301
8302
8058
8305B
8062
2047
8305F
2024
8306
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
Schéma 2
0314
7515A
2026
9514
9515AL
4515N
2026
9514
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
4515N
Diffuseurs 1
0314