SPECIMEN

Directive Navires de Plaisance
Recreational Craft Directive
Direction Marine
Marine Division
Page 1 of 2
Attestation/Certificate N°: 6633.0162.A1.9 CE-RCD
Dossier/File N°: BV ON 23-10
ATTESTATION DE CONFORMITE
STABILITE ET FRANC-BORD / FLOTTABILITE
ATTESTATION OF CONFORMITY
STABILITY AND FREEBOARD / BUOYANCY AND FLOTATION
Demandeur/Applicant:
Adresse/Address:
63
(&
,0
(1
Le soussigné, agissant dans le cadre de la notification du Bureau Veritas S.A., atteste que le type de bateau identifié ciaprès, est conforme aux exigences essentielles 3.2 (stabilité et franc-bord) et 3.3 (flottabilité) de la Directive 94/25/CE
transposée en droit national français par le Décret N° 96/611 du 4 Juillet 1996. / The undersigned, acting within the
scope of Bureau Veritas S.A.'s notification, certifies that the boat type hereafter identified, complies with the essential
requirements 3.2 (stability and freeboard) and 3.3 (buoyancy and flotation) of the Directive 94/25/CE transposed in
the french national law by Decree Nr 96/611 of 4th July, 1996.
BRIG INFLATABLE BOATS
Takhiatashskaya 3, Kharkov, 310033 UKRAINE, CIS
Cette attestation n'est valide que pour le type de bateau mentionné ci-après / This certificate is valid only for the boat
type specified hereafter:
F450 Rigid Inflatable Boat
Cette attestation comporte une annexe de 1 page, qui décrit le type de bateau, les normes ou règles appliquées, les
plans et informations soumis, ainsi que les rapports d'essai réalisés. / This certificate is accompanied by an annex of 1
page, describing the boat type, the standards or rules applied, the drawings and informations submitted, as well as
test reports done.
Etabli à / Issued at Paris La Défense le/on:
04/02/2000
Jean-Marc TABUTEAU
Responsable Plaisance
Yacht Manager
Cette attestation 6632.0162.A1.9 annule et remplace l’attestation n°6632.0162.A0.9 datée du 28/04/1998. Cette attestation perd sa validité au cas où le bateau serait modifié par rapport au modèle
examiné. Le constructeur doit informer le Bureau Veritas de toute modification ou changement dans la conception du bateau pour obtenir une attestation valide. La dernière édition des Conditions
Générales de la Direction Marine au verso, est applicable. This certificate 6632.0162.A1.9 annuloaltes and replaces certificate 6632.0162.A0.9 dd 28/04/1998. This Certificate is not valid for boat,
the design of which has been varied or modified from the specimen tested. The manufacturer shall inform Bureau Veritas of any modifications or changes to the boat in order to obtain a valid
certificate. The latest edition of the Marine Division General Conditions stated overleaf is applicable.
Directive Navires de Plaisance
Recreational Craft Directive
Page 2 of 2
Attestation/Certificate N°: 6633.0162.A1.9 CE-RCD
Dossier/File N°: BV ON 23-10
F450 Rigid Inflatable Boat - BV ON 23-10
I. Type de bateau / Boat type:
Powered Inflatable Boat of 37.5 kw (50 HP) - LHT= 4.50 m, B = 2.10 m
Design Category C.
II - Plans et documents soumis pour examen / Drawings and documents submitted for examination:
Drawing FALCON F450,
Technical Specification, fax RTM 1691 /VY.TS dated 28/4/98,
Test Report N° 001/BVN/98 dated 16 April 1998 from BV Odessa,
HIN of tested hull: UA-BRG02160B899
,0
(1
III. Conformité au décret 96/611 du 4/7/96 (Annexe I) / Conformity to decree 96/611 of 4/7/96 (Annex I):
Point 3.2: Stabilité et Franc-Bord / Stability and freeboard: Standard ISO DIS 6185-3 (Clause 6.3)
Point 3.3: Flottabilité / Buoyancy and flotability: Standard ISO DIS 6185-3 (Clauses 6.7, 6.9, 6.10).
63
(&
Category as per ISO Standard
Length Overall (m)
Beam Overall (m)
Inboard Length (m)
Inboard Beam (m)
Tube Diameter (m)
Number of Chambers
Maximum Number of Persons
Maximum Load (kg)
Recommended Motor Power (HP)
Maximum Motor Power (HP)
VII
4.50
1.89
3.10
0.93
.50
4
7
800
20 to 40
50
IV. Conclusion:
The craft fulfills the technical requirements allowing conformity to the Decree. The following informations
will be indicated on the builder’s plate.
Design Category
Number of persons recommended by the builder
Maximum load recommended by the builder (kg)
CE 0062 (nota: No production survey performed)
C
7
800
V. European Authorised Representatives of the builder:
-
SAKACO IMPORT Oy, Hannutie 2, 02300 ESPOO, Finland,
VOLVO PENTA Central Europe Gmbh, Redderkoppel 5, D-24159 Kiel, Germany
TOHATSU OUTBOARDS BENELUX B.V.,
Watercirkel 162, 1186 NA Amstelveen, The Netherlands
DOLPHIN Marine Supply, Wolfgrabenstrasse A, 8135 Langnau, Switzerland,