Installation Instructions ② ① ② ⑦ ⑥ ④ ① ⑤ ②
Documents pareils
Installation Instructions
Tighten all M12 Cl8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M) Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all hole...
Plus en détailInstallation Instructions - Draw-Tite
Tighten all 1/2” fasteners with torque wrench to 75 Lb.-Ft. Tighten all M10 CL8.8 fasteners with torque wrench to 38 Lb.-Ft.
Plus en détailInstallation Instructions - Cequent Performance Products
Tighten all 3/8 GR2 fasteners with torque wrench to 20 Lb.-Ft. Tighten all M10 CL8.8 fasteners with torque wrench to 42 Lb.-Ft. Note: check hitch frequently, making sure all fasteners and ball are ...
Plus en détail