Draw-Tite Trailer Hitches Installation Instructions
Documents pareils
Installation Instructions
GMC Yukon XL*, GMC Yukon*, Cadillac Escalade, Chevrolet Avalanche, *Vehicles with amber turn signals
Plus en détailInstallation Instructions ② ① ④③ ⑥⑤ ⑥⑤ ④③ - Draw-Tite
4. Install forward M14 bolts (Item 1) into weldnut (push tail pipe forward and rotate bolt to get it into place). 5. Torque all fasteners to specifications.
Plus en détailDraw-Tite Trailer Hitches Installation Instructions
Tighten M14 CL10.9 fasteners with torque wrench to 115 Lb.-Ft. (156 N*M) Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M) Note: check hitch frequently, making sure all faste...
Plus en détailReese Trailer Hitches Installation Instructions
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent entry of water and exhaust ...
Plus en détailInstallation Instructions !
Tighten M14 and 1/2” fasteners with torque wrench to 100 Lb.-Ft. (136 N*M)
Plus en détailReese Trailer Hitches Installation Instructions
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
Plus en détailInstallation Instructions - Draw-Tite
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent entry of water and exhaust ...
Plus en détail