Vertical CNC-machining centre model MILL 2000 Partly refurbished

Vertical CNC-machining centre model MILL 2000 Partly refurbished

Pos. Qty.
Article Description
Price / €
Offer
1
1
Vertical CNC-machining centre model MILL 2000
Partly refurbished pre-owned machine
Year of construction 2008, Weight 9.500 kg
Machine-No. 419-57
Column moving machining centre with fixed table
Machine base with integrated chip output, secretion to the left side.
Equipment packet NC-swivel head
Motor spindle for swivel head, Grease Lubrication
12,5 kW by 100 % ED
34,0 kW by 10 % ED
Speed range 20 – 12.000 min-1 – 140 Nm
Tool clamping over spring washer, disconnect hydraulic
tool receiver for HSK-A 63 DIN 69893
NC-swivelling axis +- 100
- 30 U/min, release 0,001°
- Index accuracy +- 10” with direct measuring system
- Drive torque 280 Nm
- with hydraulic clamping, holding moment of clamping 1400 Nm
Hydraulic aggregate for swivel head clamping and unclamping unit for
tool clamper
Tool magazine designed for tool holder HSK-A 63 DIN 69893
Surface cooling, pump capacity 20 ltr./min by 11 bar, purity 50 µm nominal
Drilling capacity in St 60
Ø 36 mm
Tapping capacity
M 24
Milling capacity in St 60
350 cm³/min
Travel:
X-axis
Y-axis
Z-axis
2000 mm
610 mm
horizontal spindle 715 mm /
vertical spindle 630 mm
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 1 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Automatic tool changer, protected against chips
Tool places
40
Tool shaft
HSK-A 63 DIN 69893
Tool-∅
max. 75 mm
Tool-∅
if adjacent places are free
max. 125 mm
Tool length
max. 250 mm
Tool weight
max. 3 kg (max. 8,0 kg)
Tool change time approx
1,5 s (depends on CNC)
Chip-to-chip-time approx.
5,0 s (depends on CNC)
Fixed table with chip pan
clampning surface
with 5 T-slots
2.600 x 710 mm²
1 x 18 H12, 4 x 18 H8
Feed drives for X-, Y- and Z-axis
digital direct drives and indirect absolute path measuring system
(no reference point starting)
High speed package - 2,9 s
consisting of:
- rapid traverse 60 m/min in x-, y- and z-axes.
- Spindle speed range: 20 - 12.000 rpm
- Chip-to-chip-time appr. 2,9 s
- Thermodrive with indirect path measuring system
Remark:
With normal conditions the machine does not have to be anchored to the floor.
(For slippery floors we recommend anchoring.)
SIEMENS CNC-control 840D
(PCU 50 / NCU 572.5, 6 measure circuit, 1 channel)
incl. 10,4" TFT colour screen / full keyboard OP010S
incl. Windows XP control panel logic
NC-memory 256 KB
(available to the max. 200 programs)
for eradication from parts program for ISO 66025
and fixed place, ca. 2 GB program register for free available
drilling cycles G81-G89
drilling and milling cycles
M- and T- functions
circular interpolation (360 degrees)
re-start into program
Subroutines, parameter programming
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 2 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
simultaneous programming
contour programming with cycle support
support through cycles
polar coordinates
tool offsets for geometry, wear
tool radius correction for
intersection computing
crossingradius
4 zero offsets G54-G57
30 zero shifts programmable with G-functions
3D and helical interpolation
screen switch off
mirror function
scaling function
insert of chamfer and radius
Universal interface RS 232C (2 x V24) side of the control panel
RJ45 Ethernet port in the command console
orientated spindle stop
drip feed function through V24 interface
dimension metric or inch
software limitswitch
NC-diagnosis
machine-diagnosis
absolute indirect path measurement systems
powermeter in screen
rigid tapping
look ahead function with dynamic feedforward
CHIRON Powersafe
Software package for selective shutdown of installed consumers like axis
motors, drives, spindles, seal air, airsensoring and ancillary equipment in
production breaks or during programmable points in time using a shift calendar.
Definable point in time at which the machine starts demand-oriented
automatically with a variable warmup programm to recovery the production
readiness.
CHIRON Maintenance Management in the screen
display of the pending maintenance:
- advance warning = "prepare maintenance"
- warning = "carry out maintenance"
- machine stop = "catch up on maintenance"
Abridged instructions for the pending
maintenance with graphic illustration on CD-ROM.
Password protected confirmation of the performed
maintenance through the maintenance staff.
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 3 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Remote diagnosis and tele service
Optimization of the maintenance process and
shortening of trouble shooting through faster diagnosis:
- Detailed information about the machine status is available
to support both, internal and also optionally external
experts, independent from time and location.
This way a faster and more qualified support is possible.
- Possibility of remote control of the NC-control for the analysis
of operation sequences and support with programming problems.
- Access to PLC for diagnosis, trouble shooting and programming.
- Notification service with SMS / E-mail e. g. at end of job or
in the case of breakdown.
- Simple backup through use of the existing infrastructure of
the internet.
- Safe access through defined user rights, access control and
encryption of data.
- Access through Ethernet connection RJ45 or telephone line
(preferably ISDN RJ45 or analog RJ11) with router.
Modem and router are available free of charge.
If these parts or this service will not be used, the modem
and / or router is going to be removed by our service-staff.
During warranty this service is free of charge.
After warranty a prolongation on a yearly basis is possible.
Precondition:
The connection of the machine to the internet through in-house
network or telephone line has to be provided by customer.
Working hours and piece counter
in the screen
Socket 230 V
at control panel
Socket for portable mini-hand wheel
without emergency stop button,
at control panel
Cabinet cooler
as a door mounting unit
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 4 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Signal lamp on control panel for 3 signals
Signal "red" = failure
Signal "white" = machine loaded
Signal "green" = machine is running
Machine enclosure with full cast iron clade working chamber
with sliding doors, electrically interlocked,
2.500 mm high above floor, incl. machine lamp
Set-up elements
Chip conveyor (scratch band) 850 K-1 / 200 (1024485)
With side ejection, ejection height 1050 mm,
Tank capacity 200 l, max lift pump 300 l / min. at 1,3 bar
Prerequisite:
Cooling equipment or connection to a central coolant system
(omitted from the basic machine and the production of the package
chip conveyor with lateral ejection)
Coolant equipment HL 450 / 900
tank capacity 900 l,
with low pressure pump 100 l/min at 2,1 bar and up to 250 l/min at 1,8 bar
and high pressure pump 20 l/min at 30 bar
coolant filtration for high pressure and flood coolant
with hydrostatic paper bond filter HL 450, filtration 50 µm nominal
Duplex filters in the high pressure circuit to protect the machine
4 th ready to plug axis
for NC rotary table
P port uncontrolled
Hydraulic power unit
for continuous operation
pressure: 170 bar, flow rate: 11,3 l/min.
including control valves and to control the pressure and swivel head clamping
release unit for tool clamping
External cooling, pumping capacity of 20 l / min at 4 bar
Extension hydraulic unit
of Hydraulic unit from the NC-Tilting head package
pressure: 210 bar
incl. valves for supply of 2 clamping devices
and 2 pressure switches for clamping control
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 5 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Extension hydraulic unit
for clamping of rotary table or counter bearing
with 1 second pressure stage, 1 additional clamping circuit
and 1 connecting coupling with hydraulic installation up
to outside of machine bed
for one table side (4th axis)
5-axis milling package (TRAORI)
for processing spatially curved surfaces
with 3 linear axes and two additional axes.
- 5-axis transformation with tool orientation
and tracking tool, The processing task is fully in Cartesian space
coordinates with Cartesian position and orientation program. The
resulting movement of all 5 axes calculated within the control of the
5-axis transformation.
- 5-acis tool length offset. The length of the tool is automatically included
in the axis movement and corrected.
- Tool-oriented retreat. When interruption processing (eg tool breakage)
the tool-oriented and defined to be withdrawn.
Reinforced tool place
for tool weight max.8 kg for Mill
Centre divider
with mechanically activated door. Position closed, checked electrically.
Shuttle machining Standard 2 x 750.
Shuttle machining swivel head 2 x 765 (swivel head only in 0 ° - position)
incl. machining area recognition M61/M62
and start and receipt push buttons, mounted on both sides.
Quick removable because of pluggable connections and screwed bolts.
2 x NC-rotary-table package, complete installed consisting of:
- NC-rotary-table, type ATUP 200
- 4th NC-axis, complete
- adapter-plate for centre height 250 mm
- central pneumatic supply without control
Technical description for NC-rotary-table:
centre height 170 mm, repetition accuracy ± 10",
transmission ratio i = 90 : 1,
load moment of inertia (transmission- and acceleration dependent with / without
turning supply) 4,1 / 5,5 kgm²
face plate dia. 225 mm with center bore dia. 50 +0,012,
positioning pin dia. 16h7 and fastening holes,
with valve for pneumatic clamping of spindle,
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 6 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
max. tangential moment at clamped face plate 1000 Nm
2 x CHIRON standard fixture for rotary table
with hydraulic actuated counter bearing
bridge size 800 mm
existing of:
- base plate (instead of the adaptor plate from the rotary table package)
detachable to workpiece table
- counter bearing with hydraulic clamping
- flange plate incl. connecting coupling and quick-locator, on side of the rotary
table
- flange plate incl. connecting coupling and quick-locator, on side of the counter
bearing
- 2 x 2-core energy supply pneumatic or hydraulic
- center height 250 mm below the base plate
2 x Hydraulic actuated trunnion fixture
Total machine price as described above
on Inquiry
Commissioning and Instruction
CHIRON Range
- final alignment according to CHIRON geometric data sheet
- complete check of the machine functions
- basic instruction of the operating staff
on Inquiry
Before commissioning the customer has to provide for:
- unload and transport of the machine to the installation place
- installation and prealignment of the machine
- electric and pneumatic connecting of the machine
During start up through CHIRON personnel, the customer
assistance together with auxiliary equipment must be available free of
charge.
Following additional work will be invoiced on expense:
- try out and production of customer workpieces
- try out of customer fixtures
- additional training exceeding basic instruction
- any effort caused by customer failing to meet provisions listed above
Packing and loading
(One-way packing for transport by truck)
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 7 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
on Inquiry
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Main circuit
total power supply 400 / 230V ± 10 %, 50 cycles N/PE,
neutral conductor, load possible, pressure supply
6 bar, ± 1 bar at all procedures,
room temperature max 40°
Documentation
Operating manuals, programming and operating
manuals 1-fold on CD-ROM
Delivery time: after arrangement
intermediate sale reserve
Delivery
ex works, packing excluded
Payment
100% 1 week before delivery each net
Warranty
3 months on parts
excluding wear parts
Machine colour
two-components-structure varnish - 3 colours
window grey
acc. to RAL 7040
window blue
acc. to RAL 5023
basalt grey
acc. to RAL 7012
Transport insurance
to be covered by customer
Information Export
We point out that the CHIRON CNC-machining centres are subject
to controls. For the export from the European Union an export license
is necessary.
Information Machine safety
The machine is designed and built in accordance with the European
machine guideline.
Other safety features due to special company rules and specifications
can be considered. The actual cost will be invoiced.
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 8 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603
Pos. Qty.
Article Description
Price / €
Information Coolant lubrication
The machine is designed for standard water
soluble coolant and fully enclosed at the standard version.
The machine must be equipped with fume extraction.
The machine contents different plastics, varnish, resin and glue,
which are selected carefully for using coolant and cutting oil.
The use of aggressive coolant and additive could cause
major damages and machine stops.
Contact in any case your coolant supplier before machine
set-up and installation.
Mill 2000 419-57 E.doc
CMS-GmbH
take-off Gewerbepark 125
D-78579 Neuhausen ob Eck
Amtsgericht Stuttgart HRB 451099
Seite 9 von 9
Tel.: +49 (0)7461 / 940 3700
Fax: +49 (0) 7461 / 940 3701
[email protected]
www.cms-gebrauchtmaschinen.de
Geschäftsführer:
Rui Böninger
30.1.2014
Deutsche Bank Tuttlingen
BLZ 653 700 75, Kto.-Nr.: 2208 148
Steuer-Nr. 21101/01726, Ust.-Id.-Nr. DE 812948040
IBAN : DE42653700750220814800
SWIFT : DEUTDESS603