Untitled - Swiss Plastics Cluster
Transcription
Untitled - Swiss Plastics Cluster
CONTINUOUS TRAINING 2015 CLUSTER The Swiss Plastics Cluster acts as an indispensable regional platform for organizations in the industry, serves as a key reference for plastics technology in Switzerland and increasingly engages on a European level. NETWORKING PROMOTING THE EXCHANGE AMONG PARTNERS The cluster actively promotes an exchange among its members and participates in associations and platforms in the field of plastics technology to enhance the visibility of its cluster members as well as of the cluster organization itself. Besides, vital contacts are established with competence centers and clusters in various European countries from which cluster members can actively benefit from. TOWARDS NEW HORIZONS IN EUROPE From the very start the Swiss Plastics Cluster pursued an international orientation and engaged in activities abroad in order to keep its members up to date on current advances in research on a European level and to expand their members’ network beyond the borders of Switzerland. Accordingly, the cluster initially forged partnerships with clusters in neighboring countries which in return allowed the cluster to become a member of the European meta-cluster ALPlastics and to participate in the Interreg project ALPS4EU in which the Science and Technology Hub of the Canton of Fribourg joint as a full member. Thanks to the established relations with European partners the cluster was able to organize international high-level conferences in the years 2011, 2012 and 2013. Similar events are envisioned also in the future. WORKSHOP HOW TO BETTER COMMUNICATE? / FR CHF 450.- MODULE POLYMERS FR & DE CHF 300.- 12 MARCH 2015 / 13H30 - 17H30 / HEIA-FR / MICHEL PICOT, PIERRE ARRAYET, HEMERA Ateliers pratiques pour rapidement établir un bilan de l’environnement de travail ainsi que le système de communication à développer dans une entreprise. 25 MARCH 2015 / 13H30 - 17H30 / HEIA-FR / DR JEAN-MARC BOECHAT, iRAP Les polymères, quelle famille! Tour d’horizon des propriétés et des caractéristiques des plastiques. MODULE INJECTION MOLDING TOOLS FR & DE 16 APRIL 2015 / 13H30 - 17H30 / HEIA-FR / PR BRUNO BÜRGISSER, iRAP MODULE INJECTION MOLDING MACHINES FR & DE 12 MAY 2015 / 09H00 - 17H00 / ARBURG MÜNSINGEN / EDWIN BACHMANN MODULE STATISTICS, AVAILABLE TOOLS / FR 18 JUNE 2015 / 13H30 - 17H30 / HEIA-FR / DAVID MENEUR, ARIAQ MODULE INJECTION MOLDING DEFAULTS FR & DE 17 SEPTEMBER 2015 / 13H30 - 17H30 / HEIA-FR / PR BRUNO BÜRGISSER, iRAP CHF 300.- CHF 250.- Kennenlernen der unterschiedlichen Typen von Spritzgusswerkzeugen, deren Hauptaufgaben, Fütterung, Mehr fachwerkzeuge sowie die Erstellung eines Leistungsverzeichnis. Funktionsprinzip einer Spritzgussmaschine, Feinabstimmung von Spritzgussteilen und Führung der Produktion. Utilisation des outils analytiques et statistiques dans la production. CHF 300.- INNOVATION & TECHNOLOGY JOINT PROJECTS Organizations and universities of applied sciences align for applied research projects which are in large financed by the Innovation and Technology Hub Fribourg. The Swiss Plastics Cluster accompanies these projects during its inception phase, assists with the search of partners and funds and provides advice with regards to intellectual property rights. Joint projects feature the following two research focuses: – Thermoplastic polymers and their processes – Productivity and cost control Information on current and past joint projects are available here: swissplastics-cluster.ch/en/services/projects/ CHF 300.- BUSINESS COOPERATION CHF 600.- The Swiss Plastics Cluster acts as organizing committee of the fair Swiss Plastics, actively promotes the plastics industry in Western Switzerland and serves as its spokesperson. MODULE QUALITY FR TOGETHER WE ARE STRONGER. CONTINUOUS EDUCATION PLASTICS TECHNOLOGY A working group entitled “Specialist in synthetic materials“ (ATMS in French) belonging to the Swiss Plastics Cluster is in the process of writing a business plan for the creation of a training center that will be located at blueFACTORY which is situated only ten minutes walk from the central railway station in Fribourg. The training center will make use of the laboratories of the Institute of Applied Research for Plastic Materials (iRAP) which belongs to the University of Applied Science Western Switzerland: Fribourg. The laboratory will be moving in summer of 2015 to the site of the blueFACTORY as part of the INNOSQUARE project promoted by the University of Applied Science Western Switzerland: Fribourg. The new center intends to offer courses for the education of apprentices for companies throughout Western Switzerland. A workshop to be held during 2015 will bring together those companies that are interested in this service and will present the project and its objectives. HUMAN RESSOURCES COMPETENCE PROMOTION OF EMPLOYEES The Swiss Plastics Cluster organizes its own continuous training modules which embrace the specific needs of cluster members in the field of injection molding and extrusion (see program 2015). Course contents focus among others on topics such as polymers, injection molding machines, molds, conception and construction rules, quality of injection molding … MODULE PREVENTIVE MAINTENANCE / FR Qualitative Produktivität sichergestellt durch vorbeugende Instandhaltungsmassnahmen, Spritzgussformen und Peripheriegeräte. 24 SEPTEMBER 2015 / 13H30 - 17H30 / HEIA-FR / CLAUDE LOMBARD, CFP LYON CHF 350.- Une pièce, quel moule? Un moule, quel paramètre? Des paramètres, quelles procédures? Des procédures, quelles optimisations? MODULE TECHNIQUES IN THE LABORATORY / FR 1 OCTOBER 2015 I 09H00 - 17H00 I HEIA-FR I DR LAURE LALANDE, IRAP; DR PIERRE BRODARD, CHEMTECH CHF 350.- Système de validation d’un produit injecté au niveau analytique (mécaniqu, rhéologique, chimique,...) data sheet et son interprétation. 19 NOVEMBER 2015 I 13H30 - 17H30 I HEIA-FR I DAVID MENEUR, ARIAQ Pratique des plans d’expérience: Pour quoi, pour qui et comment? (statistiques, outils,...). Courses are held either in French and / or German and require a minimum number of 7 participants. In case of absence the registration fee is not being reimbursed but entitles the participant to take part in the module at a later point in time (upon renewed registration). Each participant is awarded a certificate for the completed courses. Price includes all taxes. Members of the Swiss Plastics Cluster are granted a 20% discount. Course documents, coffee breaks and / or lunch breaks are included. More details and course registration on our website: http://swissplastics-cluster.ch/en/services/training/ 18 MARCH 2015 28 MAY 2015 12 NOVEMBER 2015 EVENTS 2015 B2B CONFERENCE: PERIPHERICAL AND AUXILIARY / HEIA-FR AGM 2015 & CONFERENCE: 3D PRINTING IN THE PLASTICS INDUSTRY CONFERENCE: PLASTICS UPDATE 2016 PREVIEW 2016 - 2017 MAY 2016 OCT / NOV 2016 24 - 26 JANUARY 2017 CONFERENCE PLASTICS TECHNOLOGY VOL. 3 CONFERENCE MICRO- AND NANOTECHNOLOGIES SWISS PLASTICS FAIR 2017
Documents pareils
here - Swiss Plastics Cluster
Kennenlernen der unterschiedlichen Typen von Spritzgusswerkzeugen,
deren Hauptaufgaben, Fütterung, Mehr fachwerkzeuge sowie die Erstellung eines Leistungsverzeichnis.