docdiffuser style rear bumper
download 
Plainte Documents pareils
W0001VW49BU-FIT$011009060000$Ä
1. Remove bumper (Torx head screws around each wheel arch, along lower edge of rear panel, beneath each light
cluster (light cluster must be removed)).
2. Remove bumper cross beam from vehicle and ...
fitting instruction - template
Remove the boot floor covering, side trim, battery cover and bumper (6 M8 nuts inside boot against rear panel,
remove mud flaps and 1 push-in clip and 1 steel clip around each wheel arch). Release ...
fitting instruction - template
5. Attach neck assembly (upper most holes) with Electrical Plate (EP) and safety Chain bracket (SC) .Fully Tighten
Bolts.
6. Replace lower skirt and refit Bumper.
Recommended torque settings: Grade...
fitting instruction
Loosely attach Cross Bar (A) to the holes in the vehicle chassis using the 4 forward Bolts (D) and Side Spacers
(C) with Large Flat Washers on both sides.
