docfitting instruction
download 
Plainte Documents pareils
FITTING INSTRUCTION
M10 x 30 x 1.5p Bolts, Lock Washers and Flat Washers (25mm Diameter)
CB 2
M16 x 40mm Coupling Bolts, Nuts, Lock Washers
Z
fitting instruction - template
4. Loosely attach Mainframe (A) to Angle Cleats (E) and Sidearms (G) using Bolts (M), (with washers as shown).
Attach Extended Angle Cleats (F) to Angle Supports (C and D) and Mainframe (A) using B...
Fitting Instructions
push in studs beneath). Remove 2 torx head screws around each wheel arch, 1 behind arch trim, remove push-in clips
along lower edge of bumper.) Remove and discard bumper beam. If chassis end stiffe...
fitting instruction - template
This towbar must be used with either a Witter Towball (part number Z11) or Class A50-1 or A50-X towball dimensionally
Conforming to A50-1 with a ‘D’ and 'S' value greater than or equal to that of t...
fitting instruction - template
3. Remove tape or grommets from the bottom face of the chassis to reveal square holes. Using fixings (E), loosely attach
Sidearms (B & C) to the chassis following the instructions below. Using fixi...
