Trekhaken – Attelages – Anhängevorrichtungen – Tow bars

Transcription

Trekhaken – Attelages – Anhängevorrichtungen – Tow bars

                                    

Documents pareils

Trekhaken – Attelages – Anhängevorrichtungen

Trekhaken – Attelages – Anhängevorrichtungen Drill these points (B) and (C) transverse through the chassis beam with ø10,5mm, remove the mounting plates again and enlarge these drillings only on the inside of the chassis beam till ø18mm. Inse...

Plus en détail

Trekhaken – Attelages – Anhängevorrichtungen – Tow bars

Trekhaken – Attelages – Anhängevorrichtungen – Tow bars 4 boulons M12x65 - DIN931 4 écrous de sûreté M12 - DIN985 2 pièces de montage T48 2 tubes de montage T48 1 plaque de prise P04 1 anneau de sécurité 4 boulons M8x30 - DIN933

Plus en détail

Trekhaken – Attelages – Anhängevorrichtungen – Tow bars

Trekhaken – Attelages – Anhängevorrichtungen – Tow bars Place the tow bar between the mounting pieces (-g) and (-h) so that the points (C) of the tow bar match those of the mounting pieces. Place on the outside the bumper supports (-i) and (-j), for exe...

Plus en détail