STAINLESS STEEL HULL TUBE TO BE RESINED HULL TUBE

STAINLESS STEEL HULL TUBE TO BE RESINED HULL TUBE

HULL TUBE
STAINLESS STEEL HULL TUBE
TO BE RESINED
Shaft Ø (mm)
Ext. Ø (mm)
Flange Ø (mm)
Length (mm)
Reference
30
54
90
112
TUBPCIN30
35
54
90
112
TUBPCIN35
38.1
60
90
175
TUBPCIN38.1
40
60
90
175
TUBPCIN40
45
76
120
120
TUBPCIN45
50
76
120
120
TUBPCIN50
55
89
130
120
TUBPCIN55
60
89
130
120
TUBPCIN60
Other materials on request
As epoxy hull tube, this mounting is used when there is no need for an intermediate bearing between the bracket
and the coupling. The system includes an epoxy tubeto be resined available in two standard lengths, the customer can adjust at its convenience.
The system includes a stainless steel tube with a welded flange, the whole need to be stratified.
Depending on the application, a water inlet or air injection may be introduced on the tube near the seal.
MAUCOUR FRANCE - VOTRE SPÉCIALISTE EN PROPULSION MARINE DEPUIS 1868 - WWW.MAUCOUR.FR
5, rue de la Dutée - CP 1202 - 44806 Saint-Herblain cedex- Tél. +33 (0)2 40 92 16 36 - Fax : +33 (0)2 40 92 02 89 - [email protected]
Ce document n’est pas contractuel - This document is not contractual