Saber Block

Rev1.3
Saber Block
Introduction:
Saber Block consists of 128pixel, and each pixel is a three-in-one full color LED lamp. The frame is made
from aluminum alloy, which makes it very reliable, stable, and easy to install. The display can be installed
by a certain amount of saber, with simply being controlled through computer, which displays images on
the saber.
Features:
1.Light weight
Great convenience for event shows in transportation and installation.
2.Solid and pleasing structure
Pleasing and solid panel lay ideal foundation for flat and firm led display.
3.Easy installation and dismantling
Tool-free during installing and dismantling.
4.Humanitarian operation interface
Graphic operation interface enables easy operation for engineers.
5.Protection Degree: IP65
Still available during raining.
1
Rev1.3
Saber Block Specification
（1）Structure Diagram
Pixel
Each pixel is one RGB 3-in-1 SMD LED
（2）LED Parameter
NO.
Item
1
Red chip
620~625
2
Green chip
520~525
3
Blue chip
465~470
Wave Length（nm）
（3）Pixel Parameter
NO.
Item
Parameter
1
Pixel Pitch
10.4mm/0.41inch
2
Pixel Configuration
RGB linear type 3-in-1 SMD LED
（4）Module Parameter
NO.
Item
Parameter
1
Product Code
QF006-016-01
2
Dimension
166(W)×83(H)×53 (D) mm /
6.6(W)x3.3(H)x2.1(D)inch
3
Resolution
16(W)×8(H)
4
Pixel Density
9216dots/m2
5
Brightness
4800nits
6
Viewing Angle
140° Horizontal, 140° Vertical
7
Best Viewing Distance
13~34.7m / 42.7~113.8ft
8
Color Temperature
6500~9500K
9
Working Voltage
DC48V
10
Max Power Consumption
≤25.5W
11
Average Power Consumption
≤12.7W
12
Weight
0.48kg/1.06LB
13
Grey Scale
16bit
14
Colors
281trillion
15
Refresh Rate
---
16
Scan Method
Static status
17
Refresh Frame Speed
≥60Hz
18
Control Method
PSU/M2 processor
19
Display Mode
1920*1080
20
Life-span
≥50,000hours
21
Blind Dot Rate
≤0.02%
22
Control Distance
1. Saber Block and Saber Block ≤5m/16.4ft,
2. Saber Block and PSU ≤30m/98.4ft
3.Between PSU ≤100m/328ft
23
Storage Temperature / Humidity
-10°C~+50°C / <80%RH
24
Operation Temperature/ Humidity
-10°C~+45°C / 10%RH~90%RH
25
Protection Rating
IP65(front)/IP65(back)
2
Rev1.3
Saber Block Drawing
3
Rev1.3
Saber Block Connection
Note:
1. The maximum output of each Power PSU 2000 is 12 pcs.
2. The cable connected between the first Saber Block and the Power PSU 2000 should be less than
30m/98.4ft.
1. La puissance maximale de chaque PSU Power 2000 est de 12 pcs.
2. Le câble connecté entre le premier bloc Saber et l'alimentation électrique 2000 devrait être
inférieure à 30m / 98.4ft.
! WARNING
1.The ventilation must not be impaired by covering the appliance with items such as newspapers,
table cloths, curtains, etc.
2.The appliance does not require much attention. If you want to clean it, please use only dry cloths or
a brush.
! Avertissement
1.Le ventilation ne doit pas être compromise par couvrant l'appareil avec des objets tels que journaux,
nappes, rideaux, etc.
2.Le appareil ne nécessite pas beaucoup d'attention. Si vous voulez nettoyer, s'il vous plaît utilisez
uniquement des chiffons secs ou une brosse.
4