Installation Instructions - Draw-Tite
Documents pareils
Installation Instructions
Reinstall muffler isolator hangers. Tighten all ½” fasteners with torque wrench to 75 Lb.-Ft.
Plus en détailInstallation Instructions
Reinstall muffler isolator hangers. Tighten all ½” fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Plus en détailInstallation Instructions - Draw-Tite
Tighten all 1/2” fasteners with torque wrench to 75 Lb.-Ft. Tighten all M10 CL8.8 fasteners with torque wrench to 38 Lb.-Ft.
Plus en détail