Before Using the Product - Mitsubishi Electric Corporation

BCN-P5999-0508-A(1505)MEE
 Attachment/removal procedure
AD75CK-CV
(a) Attaching a cover
Mount a cover to an AD75CK cable clamp in the direction of the arrow, and push it until it clicks.
Before Using the Product
Before using the product, please read this manual. Make sure that the end users read this
manual and then keep the manual in a safe place for future reference.
This product is a cover for an AD75CK cable clamp. The MELSEC iQ-R series system using an
AD75CK cable clamp will be compliant with ship classification standards by attaching this cover.
 Relevant manuals
Before using the product, please read the Safety Guidelines included with the base unit used,
especially the following sections.
● SAFETY PRECAUTIONS
● CONDITIONS OF USE FOR THE PRODUCT
● EMC AND LOW VOLTAGE DIRECTIVES
● WARRANTY
 Manuels correspondants
Avant d'utiliser ce produit, prière de lire les "Safety Guidelines" (directive de sécurité) fournies
avec l'unité de base, en particulier dans les sections suivantes.
● PRÉCAUTIONS DE SÉCURITÉ
● CONDITIONS D'UTILISATION DE PRODUIT
● DIRECTIVES CEM ET BASSE TENSION
● GARANTIE
(b) Removing a cover
Pull the hook of the cover outward with your fingers.
Pull the cover forward.
 Packing list
Check that the following items are included in the package of the product.
Item
Quantity
Ship classification compliant cable clamp cover
4
Before Using the Product (this manual)
1
Ò
Hook
 Operating ambient temperature
Use the product within the range of 0 to 55.
Ó
 Température ambiante de fonctionnement
Ce produit doit être utilisé entre 0 et 55.
 External dimensions
 Handling precautions
• When attached to an AD75CK cable clamp
• To attach/remove a cover to/from an AD75CK cable clamp, keep a distance of 20mm or more
between the cable clamp and the walls. (A distance of 10mm or more is required between the
cover and the walls.)
AD75CK-CV
80.5
74
20mm or more
Wall
60
12.5
Wall
(35)
12.5
20mm or more
Control panel where the AD75CK is installed
AD75CK-CV
AD75CK
AD75CK
10mm or more Cables
Ground terminal 10mm or more
• Wire the ground terminal with the AD75CK cable clamp and cables parallel so that the cable
clamp cover is mounted.
• Wire the cables so that they do not sag by their own weight and damage the cable clamp cover.
Cable clamp cover
• Wire the cables so that the braided shield part of cables fixed by the AD75CK cable clamp is
brought within the cable clamp cover.
Braided shield
Cables
(Unit: mm)
 Information and services
For further information and services, please consult your local Mitsubishi representative.