view lift chart - Company Wrench

Cat 320C L
40 Foot Reach
Material Handler
Lifting Capacities
P/N 0011764-2
Lift capacities calculated at attachment pivot point on stick (lbs).
No attachment on stick. Attachment weight must be subtracted.
REACH
40'
35'
Front
Side
30'
Front
Side
25'
Front
Side
20'
Front
Side
15'
Front
Side
10'
Front
Side
Front
45'
40'
7,144
*8,245
*9,021
*9,021
*10,353
*10,353
35'
*8,978
*8,978
*9,989
*9,989
30'
7,167
*8,122
*8,999
*8,999
*10,144
*10,144
25'
5,298
*7,359
7,022
*8,233
*9,318
*9,318
*10,771
*10,771
20'
5,178
*7,408
6,773
*8,473
9,118
*9,840
*11,787
*11,787
*14,874
*14,874
5,007
*7,463
6,466
*8,738
8,595
*10,423
11,998
*12,953
*17,346
*17,346
10'
4,828
*7,430
6,155
*8,905
8,073
*10,866
11,079
*13,858
16,492
*19,139
5'
4,677
*7,197
5,891
*8,840
7,644
*10,960
10,383
*14,102
*14,863
*14,863
4,585
*6,619
5,712
*8,406
7,363
*10,544
9,984
*13,507
*13,392
*13,392
*6,726
*6,726
-5'
4,588
*5,448
5,643
*7,447
7,243
*9,497
9,845
*12,051
*14,193
*14,193
*8,691
*8,691
-10'
5,707
*5,710
7,284
*7,670
*9,701
*9,701
*11,892
*11,892
*10,481
*10,481
-15'
*4,756
*4,756
*6,281
*6,281
*20,654
*20,654
15'
0'
-20'
-25'
Notes:
1. Do not attempt to lift or hold any load that exceeds these rated values at their specified load radii and heights.
2. The least stable position is over the side.
3. The operator should be fully acquainted with machine operation before operating the machine.
4. Lifting capacities assume a machine standing on level, firm and uniform supporting surface. Operator must make allowance for job conditions such as soft or
uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, inexperienced personnel, etc.
5. The above theoretical ratings are based on calculations derived from standard O.E.M. lift charts. They do not exceed 87% of hydraulic lifting capacity or
75% of tipping capacity. Rated loads marked with an asterisk (*) are limited by hydraulic lifting capacity. 5,340# additional counterweight installed.
HEIGHT
Side