Journal List - Science des Matériaux Métalliques

Journal List
MMS J-1
Lecomte-Beckers, J. Modélisation écologique d'une rivière en vue de l'optimisation de
l'épuration. Revue IRE vol. 3[6], p. 43-55 (1979)
MMS J-2
Lecomte-Beckers, J. Modélisation du phénomène de biodégradation naturelle en rivière
polluée en vue de l'optimisation de l'épuration. Wallonie vol. 79[3-4], p. 339-374 (1979)
MMS J-3
Daoxin, J.; Lecomte-Beckers, J.; and Habraken, L. Modelling micropore formation
during directional solidification. Metallurgical reports CRM vol. 59, p. 25-34 (1982 )
MMS J-4
Daoxin, J.; Lecomte-Beckers, J.; and Habraken, L. Research regarding the formation of
micropores in a Ni-Ti-C alloy during directional solidification under vacuum.
Metallurgical reports CRM vol. 60, p. 3-12 (1982)
MMS J-5
Coutsouradis, D; Leroy, V; Greday, T; and Lecomte-Beckers, J. Review of hot
shortness problems in copper-containing steels. ATB Metallurgie vol. 23[3], p. 7-1-7/24
(1983)
MMS J-6
Lecomte-Beckers, J. and Walmag, G. Microstructural study of high strength rolled ZnCu-Ti alloys. Micron and Microscopica Acta vol. 18[3], p. 241-242 (1987)
MMS J-7
Lecomte-Beckers, J. and Diderrich, E. Mise en oeuvre de composites à matrice
métallique bore-aluminium. ATB Metallurgie vol. 27[1], p. 3-10 (1987)
MMS J-8
Lecomte-Beckers, J.; Terziev, L; Rachev, P; and Walmag, G. Etude microstructurale
des alliages ZA12 et ZA27 au cours du vieillissement. Journal de Microscopie et de
Spectroscopie Electroniques vol. 13, p. 43 (1988)
MMS J-9
Lecomte-Beckers, J. Study of solidification features of nickel-base superalloys in
relation with composition. Metallurgical Transactions A : Physical Metallurgy and
Materials Science vol. 19A[9], p. 2333-2340 (1988)
MMS J-10
Lecomte-Beckers, J. Study of microporosity formation in nickel-base superalloys.
Metallurgical Transactions A : Physical Metallurgy and Materials Science vol. 19A[9], p.
2341-2348 (1988)
MMS J-11
Lecomte-Beckers, J.; Terziev, L; Rashev, P; and Walmag, G. Microstructural study of
the metastable phases in Zn-Al alloys. Journal de Microscopie et de Spectroscopie
Electroniques vol. 14[2], p. 85-94 (1989)
MMS J-12
Terziev, L; Lecomte-Beckers, J.; Rashev, P; and Greday, T. Study of transition phases
during isothermal aging at 250°C of Zn-27% Al alloy. Physica Status Solidi A : Applied
Research vol. 116[2], p. 521-527 (1989)
MMS J-13
Terziev, L; Rachev, P; Lecomte-Beckers, J.; and Greday, T. Phase formation during
aging of Zn-12% Al and Zn-27% Al alloys at 100°C. Zeitschrift für Metallkunde vol.
81[6], p. 424-427 (1990)
MMS J-14
Rachev, P; Terziev, L; Lecomte-Beckers, J.; and Wegria, J. Electron microscopical
investigations of hexagonal phase precipitation in Zn-12 wt% Al-1 wt% copper and Zn27 wt% Al-2 wt% copper alloys. Acta Metallurgica et Materialia vol. 39[9], p. 2177-2182
(1991)
MMS J-15
Lecomte-Beckers, J.; Terziev, L; and Wegria, J. TEM investigation of transition phases
precipitation in ZA alloys after isothermal aging at 250°C and subsequent creep at high
temperature. Materials Science Forum (Intergranular and Interphase Boundaries in
Materials) vol. 126-128, p. 667-670 (1993)
MMS J-16
Lecomte-Beckers, J.; Terziev, L; and Wegria, J. Etude des relations entre les
microstructures obtenues par vieillissement isotherme et le comportement mécanique
(fatigue, résilience) dans des alliages Zn-Al et Zn-Al-Cu. Revue de Métallurgie/ Cahiers
d'Informations Techniques vol. 91[5], p. 789-798 (1994)
MMS J-17
Terziev, L; Lecomte-Beckers, J.; and Wegria, J. Microstructural study of a zincaluminium-copper alloy after thermal treatment at 100°C and creep. Zeitschrift für
Metallkunde vol. 85[9], p. 640-644 (1994)
MMS J-18
Terziev, L; Lecomte-Beckers, J.; and Wegria, J. Influence of creep on the
microstructure of Zn-Al-Cu alloys aged at 250°C. Physica Status Solidi A : Applied
Research vol. 152[2], p. 405-413 (1995)
MMS J-19
Terziev, L; Lecomte-Beckers, J.; Bojinov, V; Petrov, R; and Breyer, J. P. Dilatometric
and calorimetric study of the graphitisation of high chromium cast iron. Journal de
Chimie Physique et de Physico-Chimie Biologique vol. 94[5], p. 1107-1115 (1997)
MMS J-20
Lecomte-Beckers, J.; Terziev, L; Breyer, J. P.; and Delcour, N. Application and
performances of graphitic chromium cast iron rolls. Revue de Métallurgie/ Cahiers
d'Informations Techniques vol. 96[11], p. 1401-1411 (1999)
MMS J-21
Lecomte-Beckers, J. and Magnée, A. Characteristics of powder steel strengthened by
disperse oxide and carbide phases. Stal' vol. 10, p. 98-99 (2000)
MMS J-22
Lecomte-Beckers, J.; Terziev, L; and Breyer, J. P. Performance characteristics of mill
rolls from graphite chromim cast iron. Stal' vol. 1, p. 46-50 (2000)
MMS J-23
Lecomte-Beckers, J.; Tchoufang-Tchuindjang, J.; Pirard, E.; and Breyer, J. P.
Development of a new high-speed steel with optimized carbide composition for mill
rolls. Stal' vol. 2, p. 88-92 (2003)
MMS J-24
Robertz, B.; Boschini, F.; Rulmont, A.; Cloots, R.; Vandriessche, I.; Hoste, S.; and
Lecomte-Beckers, J. Preparation of BaZrO3 powders by a spray-drying process.
Journal of Materials Research vol. 18[6], p. 1325-1332 (2003)
MMS J-25
Lecomte-Beckers, J. and Tchoufang-Tchuindjang, J. Use of Microscopy for
identification of complex MC, M2C, M6C, M7C3 and M23C6 carbides in high speedsteels. GIT - Imaging and Microscopy vol. 2 (2005)
MMS J-26
Lecomte-Beckers, J.; Rassili, A.; Carton, M.; Robelet, M.; and Koeune, R. Study of the
liquid fraction and thermophysical properties of semi-solid steels and application to the
simulation of inductive heating for thixoforming. International Journal of Forming
Processes vol. 8[1] (2005)
MMS J-27
Perez, F. J.; Martinez, L.; Hierro, M. P.; Gomez, C.; Portela, A. L.; Pucci, G. N.; Duday,
D.; Lecomte-Beckers, J.; and Greday, Y. Corrosion behaviour of different hot rolled
steels. Corrosion Science vol. 48[2], p. 472-480 (2006)
2
MMS J-28
Simar, A.; Lecomte-Beckers, J.; Pardoen, T.; and De Meester, B. Effect on boundary
conditions and heat source distribution on temperature distribution in Friction Stir
Welding. Science and Technology of Welding and Joining vol. 11[2], p. 170 (2006)
MMS J-29
Lecomte-Beckers, J.; Herman, M.; and Breyer, J. P. Influence of excessive carbides
upon strength of hot rolled rolls of steel similar to high speed grade. Stal' vol. 9, p. 87-92
(2006)
MMS J-30
Fraipont, C.; Püttgen, W.; Bleck, W.; and Lecomte-Beckers, J. Influence of experimental
parameters on properties and the microstructure of the steel X210CrW12 in the semisolid state. Solid State Phenomena (S2P 2006 Conference) vol. 116-117, p. 209-212
(2006)
MMS J-31
Lecomte-Beckers, J.; Rassili, A.; Robelet, M.; Poncin, C.; and Koeune, R.
Determination of solidification parameters used for the prediction of the thixoformability
of several steel alloys. Solid State Phenomena (S2P 2006 Conference) vol. 116-117, p.
54-57 (2006)
MMS J-32
Vaneetveld, G.; Rassili, A.; Lecomte-Beckers, J.; and Atkinson, H. V. Thixoforging of
7075 aluminium alloys at high solid fraction. Solid State Phenomena (S2P 2006
Conference) vol. 116-117, p. 762-765 (2006)
MMS J-33
Lecomte-Beckers, J.; Moureaux, P.; Carton, M.; and Habraken, A. M. Characterisation
of duplex steel Uranus 76N during deformation and heat treatment. Physica Status
Solidi A : Applied Research vol. 203[15], p. 3651-3664 (2006)
MMS J-34
Habraken, A. M.; Bouffioux, C; Carton, M.; and Lecomte-Beckers, J. Study of a 2024
aluminium rod produced by rotary forging. Journal of Materials Processing Technology
vol. 184[1-3], p. 19-26 (2007)
MMS J-35
Martinez, L.; Gomez, C.; Lecomte-Beckers, J.; and Perez, F. J. Corrosion studies of
different ferrous alloys for rolling cylinders. Materials and Design vol. 28[1], p. 196-202
(2007)
MMS J-36
Tchoufang-Tchuindjang, J. and Lecomte-Beckers, J. Fractography survey on High
Cycle Fatigue Failure : Crack origin characterisation and correlation between
mechanical tests and microstructure in Fe-C-Cr-Mo-X alloys. Journal of Fatigue vol.
29[4], p. 713-728 (2007)
MMS J-37
Vaneetveld, G.; Clarinval, A. M.; Dormal, T.; Noben, J. C.; and Lecomte-Beckers, J.
Optimization of the formulation and post-treatment of materials type stainless steel for
rapid manufacturing. Journal of Materials Processing Technology vol. 196[1-3], p. 160164 (2007)
Soumis
MMS J-38
Tchoufang-Tchuindjang, J. ; Delaunois, F. and Lecomte-Beckers, J. Tailored HSS
microstructures towards solid solution heat treatments for carbides content
improvements. Metallic & Materials Transactions A (2007)
MMS J-28
Guerard, S.; Gyselinck, J.; and Lecomte-Beckers, J. Finite element modelling of
an asynchronous motor with one broken rotor bar, comparison with the data recorded
on a prototype and material aspects. Bulletin Scientifique de l'AIM vol. 1, p. 13-22
(2005)
3
4