N° CE-PED-A1-ECL 01-07-THA

Bureau Veritas S.A. is a Notified
Body under the number 0062
Autorisation d'apposer le numéro d'identification (0062)
de l'organisme notifié Bureau Veritas SA
Letter of authorization to affix the Bureau Veritas SA notified body number (0062)
N° CE-PED-A1-ECL 01-07-THA
BUREAU VERITAS S.A., agissant dans le cadre du contrat TCKL 05 014 et de sa notification (numéro d'organisme
notifié 0062) au titre du module A1 seulement de l'annexe III de la directive "Equipements sous pression"
n° 97/23/CE, autorise le demandeur à apposer le numéro d'identification 0062 accompagnant le marquage CE sur les
produits identifiés ci-après:
BUREAU VERITAS S.A., acting within the scope of the contract TCKL 05 014 and of its notification (notified body
number 0062) for module A1 only of annex III of the Pressure Equipment directive n° 97/23/EC, authorizes the applicant
to affix the identification number 0062 accompanying the CE marking, on the items of equipment identified hereinafter:
Fabricant (Nom) / Manufacturer (Name) :
Eknavakol Co. Ltd.
Adresse / Address:
39/21 Moo 7km, 8 Ram-Indhra Rd, Kannayao,
Buengkum, 10230 Buengkum, THAILAND
Mandataire (Nom ) / Authorized representative (Name):
N/A
Adresse / Address:
N/A
Marque commerciale / Branding name:
-
Description de l'équipement / Equipment description:
Assembly - Monomer Mixing Tank 150 Litres
Identification du type / Identification of type:
Assembly as described in Annex 1.
Cette autorisation est accordée / This authorization is granted :
¤ pour tous les produits du lot suivant / for all items of the batch defined as follows:
Mode d'apposition et emplacement du marquage de l'équipement / Nature
and location of the affixing of the marking of the equipment:
Please see Annex 1.
Nameplate is permanently affixed to
the tank.
Le marquage CE concerné par la présente lettre est destiné en priorité aux autorités de contrôle des Etats membres et non au
consommateur final. La présente autorisation est présumée nulle et le fabricant supportera seul les conséquences de son utilisation,
en cas de modification apportée à l'équipement susceptible de remettre en cause sa conformité aux exigences essentielles de
sécurité ou à ses conditions d'utilisation prévues et, de manière générale, si le fabricant ne respecte pas, notamment, l'une ou l'autre
des obligations mises à sa charge par la Directive 97/23/CE du 29 mai 1997 telle que transposée dans le(s) droit(s) national(aux)
applicable(s).
The CE marking referred to in this letter is first and foremost intended for the Member States surveillance authorities, and not for the
final consumer. This authorisation shall be deemed to be void and the manufacturer shall alone bear any consequences pursuant to its
use, in case of modification to the equipment where this may affect conformity with the essential safety requirements or the prescribed
conditions for use of the equipment, and generally where the manufacturer fails in particular to comply with any of his obligations under
directive nr 97/23/EC of 29 May 1997 as transposed in the applicable law(s).
Etabli à / Made at
Le (MM/JJ/AAAA) /
On (MM/DD/YYYY)
Bangkok, Thailand
07/13/2007
Signé par / Signed by
Signature / Signature
Raul Vieira
Code d'enregistrement / Registration code: 2007/194.11,3109/P
La présente attestation est soumise aux Conditions Générales de Service de Bureau Veritas jointes à la demande d'intervention signée par le demandeur.
This certificate is subject to the terms of Bureau Veritas General Conditions of Service attached to the agreement signed by the applicant.
Copyright Bureau Veritas - 09/2005
PV /200
1/1 + Annexe
File N° : TCKL 05 014
http://www.bureauveritas.com/ped
ANNEX 1 TO THE APPLICATION FORM (MODULE A1)
IDENTIFICATION OF THE EQUIPMENT COVERED BY THE APPLICATION
SUPPLIES
(Type)
-
Distributor (Non-isolated)
Gauge Pressure Transmitter
RTD Sensor
Pressure Gauge
Differential Pressure Transmitter
SUPPLIER
(Name & Address)
Yokogawa (Thailand) Ltd.
799 Rama 9 Road
Bangkapi, Huaykwang
Bangkoj 10310
Thailand
“Watson-Marlow England”
Peristaltic pump
Novatech Co Ltd
36/9-10 Changwattana Road
Tungsonghong, Laksi
Bangkok 10210
Thailand
“GEMU” Tank Bottom Valve
T.V.P Valve and Pneumatic Co Ltd
7/157 Moo 11 Ram-Indra Road
Kannayao
Bangkok 10230
Thailand
“DVP” Rotary Vacuum Pump
“CKD” Solinoid Valve
Flowtech Enterprise Ltd Part
96/408, Moo 7 Rama II Road
Samaedam, Bangkhuntied
Bangkok 10150 Thailand
“Burgmann” Mechanical Seal
Burgmann (Thailand) Co Ltd
Bangna Tower C
12th Floor, 40/14 Moo 12
Bangna-Trad Road
Bangkaew, Bangplee
Samutprakarn 10540
Thailand
Butterfly Valve
J.S Enrich Engineering Co Ltd
27/1 Moo 8 Soi Romyen
Nongbon, Pravet
Bangkok 10260
Thailand
“MORITEX” Light Source
“MORITEX” Light Guide
Imaqtronix Co Ltd
140/15 Soi Ladprao 41
Ladprao Road
Chankasem, Jatujak
Bangkok 10900
Thailand
“Flender” Bevel Geared Motor
K Power Engineering Co Ltd
7/3 Central Tower B Pinklao
15th Floor
Baromrajchonee Road
Bangkok-noi
Bangkok 10700
Thailand
“Saint-Gobain” Flexible Hose
Vatska Co Ltd
81/69 Moo 4, Ratanathibeth Road
Saima, Muang
Nontaburi 11000
Thailand
“Omron” Inductive Proximity Switch
Trisak Automation Co Ltd
248 Rajchadapisek Road
Huaykwang
Bangkok 10320
Thailand
“Nitto” Quick Connect
Nandee Inter-Trade Co Ltd
314, 316, 318, 320, 322 Soi Chan
32, Chan Road
Tung Wat Don, Sathorn
Bangkok 10120
Thailand
“Donadon SDD” Rupture Disc
Donadon SDD Sri
Via Gobetti
18-20019 Settimo Milanese
MI Italy
PLC Control
Infinity Engineering System Co Ltd
56/137 Moo 7 Soi Paholyothin 56
Paholyothin Road
Bangkhen
Bangkok 10220
Thailand
Head forming
LABORATORIES * IN CHARGE OF
PRODUCTION TESTING
-
Tension Test
Bend Test
Sutee Group Int Co Ltd
27/5 Moo 7 Kingkaew-Teparak
Road
Bangpleeyai, Bangplee
Samutprakarn 10540
Thailand
NAME & ADDRESS
(For External Laboratory)
LPN Plate Mill PCL Laboratory
199/9 Moo 4, Suksawad Road
Pakklongbangplakod
Prasamutjedee
Samutprakarn 10290
Thailand
* Laboratory in charge of the type testing / production testing (give details on an
attached sheet where necessary: name and address, accreditation, recognition,
scope of activities)