SCM 100 - Didatec

SCM 100
Maltese cross mechanism
SPECIFICATIONS
EC Declaration of Conformity.
ISO 9001 Certification.
Design, manufacturing, testing,
commissioning in our workshops.
Benchtop chassis in profiled aluminum on
feet.
PEDAGOGICAL APPLICATIONS
-
Study of geometric relations and of
speed of the mechanism
Study of the motion sequence (rotation /
blockage)
Material composition:
Anodized aluminum structure
Input shaft supporting 2 discs
Outgoing shaft supporting 2 discs with a
grooved (maltese cross)
Rotating crank
DIDATEC– Zone d’activité du parc – 42490 FRAISSES
Tél. +33(0)4.77.10.10.10 – Fax+33(0)4.77.61.56.49 – www .didatec-technologie .com - email : [email protected]
Reproduction interdite – Copyright DIDATEC févr.-15- page 1
Dans le cadre de l’amélioration permanente de nos produits, ce descriptif technique est susceptible d’être modifié sans préavis
Illustrations non contractuelles
version : SCM 100 gb-A
SCM 100
Technical characteristics:
3
9
4
5
7
10
6
8
2
1
1. Input shaft driven in rotation by crank
2. Primary drive plateau of 130mm diameter (treated against
corrosion)
3. Secondary plateau of the input shaft (treated against
corrosion) use for the immobilization / release of the rotation
of the input shaft according to the position of the maltese
cross. The input shaft is thus immobilized when the cam is in
a position preventing its drive by roller Rep 4- The input
shaft is thus free in rotation when the cam is in a position
enabling its drive by roller Rep 4
4. Driving roller of the maltese cross (* 1)
5. Output shaft (anticorrosion treatment)
6. Cross of malta to 6 grooves at 60 ° (treated against
corrosion)
7. Secondary plateau of the output shaft. This plateau support
the 6 rollers rep 8 is used to immobilize the input shaft when
the cam can be driven by the roller 4
8. Rollers immobilization of the input shaft (*6)
9. Ball bearings ensuring the guidance of the 2 shafts (*4)
10. Aluminum frame of 4 feet to place the module on a table
Utilities :
3
4
All utilities must be at 2.5 meters maximum of the bench
9
Dimensions enveloppe (LxDxH mm) : 500*300*300
Weight (in Kg): 15
1
Documentation:
2
Instruction manual
Training manual and practical work
Technical file
EC Certificate of conformity
6
7
5
8
1: Chassis / 2: drive plateau / 3: secondary plateau / 4: drive roller / 5:
output shaft / 6: maltese cross / 7: secondary plateau / 8: roller of
immobilization / 9: ball bearings / 10: aluminum chassis
DIDATEC– Zone d’activité du parc – 42490 FRAISSES
Tél. +33(0)4.77.10.10.10 – Fax+33(0)4.77.61.56.49 – www .didatec-technologie .com - email : [email protected]
Reproduction interdite – Copyright DIDATEC févr.-15- page 2
Dans le cadre de l’amélioration permanente de nos produits, ce descriptif technique est susceptible d’être modifié sans préavis
Illustrations non contractuelles
version : SCM 100 gb-A