CV English A.Pineau May 2012

CURRICULUM VITAE
André PINEAU
Professor of Materials Science & Engineering
and
Head, Department of Materials Science & Engineering
Ecole des Mines de Paris
France
Work Address:
Materials Research Center
Mechanical Metallurgy Department, UMR CNRS 7633
Centre des Matériaux - Ecole des Mines
B.P. 87 – 91003 Evry Cedex (France)
Phone : (33) 1 60 76 30 43
Fax : (33) 1 60 76 31 60
E-mail : [email protected]
Nationality:
French
EDUCATION
1. Engineering Degree. Ingénieur Civil des Mines, 1965.
2. Ph.D (Materials Science). Ecole des Mines de Nancy, 1969.
BACKGROUND and PROFESSIONAL APPOINTMENTS
-
-
-
Scientific advisor at the French Atomic Energy Authority (CEA) since 1980
and at Electricité de France (EDF) since 1994, ARCELOR since 1998, SPMR
since 1997.
-
Member of CADAS (Comité des Applications - French Academy of Sciences - since
1994).
Member of the French Academy of Engineering, since 2000.
-
Mai 2012
Joined the Materials Research Center of Ecole des Mines in 1965. Prepared a PhD on
"Thermomechanical Heat Treatments applied to steels (Ausforming) and a Theory of
Precipitation Hardening in Ni base Superalloys".
Named Research Group Leader for High Strength Steels in 1969.
Appointed "Maître de Recherches" in 1971.
Spent 12 months at MIT in the Materials Science and Engineering Department in
1972/1973 as visiting scientist with Pr. R. Pelloux.
One month stay at Kyoto University with Professor I. Tamura, February 1977.
Appointed Professor in Materials Science in 1979. Head of the Materials Science and
Engineering Undergraduate Department since 1979.
Visiting Professor at M.I.T., Feb.-May 1983.
Head of the Research laboratory associated with the CNRS (URA 866) from 1978 to
1994.
1
-
Editor of Nuclear Engineering and Design Journal since 2000.
Member of Advisory Board of Editors of Fatigue and Fracture of Engineering
Materials and Structures Journal.
Expert in many Failure Analysis in nuclear, transportation, pipeline, aeronautical and
aerospace industries.
PROFESSIONAL and HONORARY SOCIETY MEMBERSHIPS
-
SF2M, DVM, ASTM, FEMS, ESIS, MECAMAT member
Member of several French Research Laboratories Committees
Scientific advisor at CEA, EDF, ARCELOR, RENAULT, SPMR
Vice President of the European Structural Integrity Society (ESIS) since 2002
DISTINCTIVE PROFESSIONAL AWARDS and HONORS
1974: Rist Price (SF2M)
1983: Osmond Price (SEIN)
1987: H. Becquerel Price (French Academy of Sciences)
1989: Silver Medal (CNRS)
1991: Portevin Medal (SF2M)
1992: GDF Price (French Academy of Sciences)
1992: Honoray Member of the DVM (Germany)
1994: Great Medal (SEIN)
1996: Griffith Medal (ESIS)
1997: Gold Medal (FEMS)
1999: Honorary Medal (SF2M)
2011: Irwin Medal (ASTM)
OTHERS
1989 : Ordre des Palmes Académiques
1991 : Ordre National du Mérite
MAIN RESEARCH ACTIVITIES
•
•
Supervisor of 75 PhD students.
About 300 research papers in international journals dealing with :
- Physical metallurgy of phase transformation in metallic alloys.
- Precipitation hardening in metals and alloys.
- Fatigue crack growth rate behaviour in Al, Ti and Ni based alloys.
- High temperature fatigue in austenitic stainless steels and Ni based superalloys.
- Creep crack growth behaviour.
- Local approach to ductile and brittle fracture of steels.
- Dynamic crack propagation and crack arrest in steels.
- Ductile to Brittle Transition in steels.
- Phase transformation in steels, Ni-based superalloys, Zr based alloys, and Al
alloys.
MAIN TEACHING ACTIVITIES
• Head of the Undergraduate Department of Materials Science and Engineering at Ecole
des Mines.
• Courses
Mai 2012
2
-
Continuum Solid Mechanics, Phase Transformations.
Physical and Mechanical Metallurgy (Deformation behavior, Creep, Fatigue,
Fracture Mechanics, etc…).
- Organization of the Internships for the students.
•
Mai 2012
Graduate courses.
- Plasticity
- Damage and Fracture
- Fracture Mechanics
3
PUBLICATIONS
BOOKS (Authored)
1.
D. François, A. Pineau and A. Zaoui, "Comportement Mécanique des Matériaux" Elasticité et
Plasticité", Hermès, 1991.
2.
D. François, A. Pineau and A. Zaoui, "Comportement Mécanique des Matériaux" "Viscoplasticité,
Endommagement, Mécanique de la Rupture, Mécanique du Contact", Hermès, 1991.
3.
D. François, A. Pineau and A. Zaoui, "Mechanical Behaviour of Materials”. Vol. I: Elasticity and
Plasticity; Vol. II: Viscoplasticity, Damage, Fracture and Contact Mechanics". Kluwer Academic
Publishers, 1998.
4.
D. François, A. Pineau and A. Zaoui, « Mechanical Behaviour of Materials”. Vol. I: Micro-and
Macroscopic Constitutive Behaviour. Springer, 2012.
BOOKS (Co-authored)
1.
La Fatigue des Métaux et des Structures. Edited by Maloine (1979). Chapter : "La Fatigue
Plastique Oligocyclique".
2.
Creep-Fatigue-Environment Interactions. Edited by R.M. Pelloux and N.S. Stoloff, AIME
Publication (1980), Chapter: Influence of Micromechanisms of Cyclic Déformation at Elevated
Temperature on Fatigue Behaviour.
3.
Fatigue at High Temperature. Edited by P. Skelton. Applied Science Publishers (1982). Chapter:
"High Temperature Fatigue in Relation to Microstructure".
4.
Flow and Fracture at Elevated temperatures. Edited by R. Raj. ASM (1983). Chapter 10
Intergranular Creep-Fatigue Crack Growth in Ni-base alloys.
5.
Subcritical Crack Growth due to Fatigue, Stress Corrosion and Creep. Edited by L.H. Larsson,
Elsevier Applied Science Publishers (1983). Chapter 16 : High Temperature Fatigue : CreepFatigue-Oxidation Interaction in Relation to Microstructure.
6.
Advances in Fatigue Science and Technology (1989). Edited by C. Moura Branco and L. Guerra
Rosa, Kluwer Academic Publishers. Chapters: "Mechanisms of Creep-Fatigue Interactions" and
"Elevated Temperature Life Prediction Methods".
7.
The Best Fracture Paper in Fracture of Engineering Materials and Structures, Vol. 14, 1991, with
E. Molinié and R. Piques.
8.
Mechanical Behaviour of Materials at High Temperature Edited by C. Moura Branco, R. Ritchie
and V. Sklenicka, Kluwer Academic Publishers, 1996, Chapters : "Defect Assessment Procedures
in The Creep Range" and "Fatigue and Creep-Fatigue Behaviour of Ni base Superalloys :
Microstructural and Environmental Effects".
Mai 2012
4
9.
Structural Materials: Engineering Application through Scientific Insight, Edited by E.D. Hondros
and M. McLean, The Institute of Metals, 1996. Chapter: Predictive Metallurgy Applied to CreepFatigue Damage of Austenitic Stainless Steels.
10. The Handbook of Materials Behavior Models, Vol. II, Chapter 7, Chapter 7 : "Ductile Rupture
Integrating Inhomogeneities in Materials (DRIIM). Academic Press (2001).
11. Encyclopedia of Materials Science and Technology. Elsevier (2001). Chapters: "Multiaxial
Fatigue Testing" and "Cleavage Fracture of Ferritic Steels".
12. Encyclopedia Universalis, "La Science au Présent 2003", "Essor Technologique des Matériaux".
13. The Best Fracture Paper in Fracture of Engineering Materials and Structures, Vol. 24, 2001, with
E. Bouyne, P. Joly, B. Houssin and C. Wiesner.
14. Mechanics of Random and Multiscale Microstructures CISM courses (Springer) Chapter "The
Randomness of Fatigue and Fracture Behaviour in Metallic Materials and Mechanical Structures"
(2001).
15. Physical Aspects of Fracture Part I : Cleavage Fracture, Part II : Ductile Rupture, en collaboration
avec D. François, Nato Science Series, Vol.32 (2002).
16. Comprehensive Structural Integrity, Vol. 7, Practical Failure Assessment Methods, Edited by R.A.
Ainsworth and K.H. Schwalbe, Chapter 7, 2003.
17. L'Essor technologique des matériaux. La Science au Présent 2004. Encyclopedia Universalis, pp.
18-19.
18. Mechanisms of Damage, in : "Local Approach to Fracture", Ecole d'Eté "Mécanique de
l'endommagement et approche locale de la rupture" (MEALOR), Ed. J. Besson, Presses de l'Ecole
des Mines de Paris, p. 33-78, 2004.
19. Pineau, A., "Practical application of local approach methods", in Comprehensive Structural
Integrity, 7, Elsevier, chapter 7.05, 177-225, 2004.
20. Pineau, A., Pardoen, T., Failure of metals, in Comprehensive Structural Integrity, 2, Elsevier,
chapter 2.06, 686-783, 2008.
21. Pineau, A. and Besson, J., “Thermal embrittlement of cast duplex stainless steels: observations
and modelling”, in: Duplex stainless steels, Eds. I. Alvarez-Armas and S. Degallaix-Moreuil,
ISTE – J. Wiley, 2009.
22. Pineau, A. and Antolovich, S. “Fatigue intergranulaire” in: Joints de grains et plasticité crystalline,
Ed. L. Priester, Hermes Lavoisier, 2011.
23. Pineau, A. and Antolovich, S., “Intergranular fatigue” in: Grain boundaries and crystalline
plasticity, Ed. L. Priester, ISTE – J. Wiley, 2011.
Mai 2012
5
BOOKS (Edited)
1.
Editor, "Multiaxial Fatigue and Design", ESIS 21, MEP 1996.
2.
Editor, "IUTAM Symposium on Micromechanisms of Plasticity and Damage of Multiphase
Materials, Kluwer Academic Publishers, 1996.
3.
Editor, "Euromech-Mecamat 96, 1st European Mechanics of Materials Conference" on "Local
Approach to Fracture, Les Editions de Physique, 1996.
4.
Editor, "Advances in Mechanical Behaviour, Plasticity and Damage", Elsevier, 2000.
5.
Editor, "From Charpy to Present Impact Testing", ESIS 30, Elsevier, 2002.
6.
Editor, “Fatigue des matériaux et des structures”, Tomes 1 & 2, Hermes-Lavoisier, 2008.
7.
Editor, “Fatigue des matériaux et des structures”, Tomes 3 & 4, Hermes-Lavoisier, 2009.
8.
Editor, « Fatigue of materials and structures », Fundamentals, ISTE - J. Wiley, 2010.
9.
Editor, “Fatigue of materials and structures”, Application to damage and design, ISTE - J.
Wiley, 2011.
10. Editor, “Fatigue of materials and structures”, Application to design and damage, ISTE - J.
Wiley, 2011.
PATENTS
1.
Perfectionnements aux alliages à base de nickel – fer – chrome, à durcissement structural obtenu
par un traitement thermique approprié, 28 septembre 1971 n° 71-34871.
2.
Premier certificat d'addition "Perfectionnement aux alliages à base de nickel – fer – chrome, à
durcissement structural obtenu par un traitement thermique approprié". 12 July 1974, n° 7424388.
Mai 2012
6
Papers in Refereed International Journals
1.
Pineau, A., Castagné, J.L. and Sindzingre, M., "Détermination de l'énergie superficielle de
domaine d'antiphase de précipités ordonnés, cohérents, sans contraintes d'interface ni interactions
chimiques", C.R.A.S., 263, Series C, 1465, 1966.
2.
Pineau, A., Castagné, J.L, Legal J. and Sindzingre, M., "Ausforming - Etude de l'écrouissage de
l'austénité métastable", Mém. Scient. Rev. Métall., 64, n°4, 319, 1967.
3.
Pineau, A. Castagné, J.L. and Sindzingre, M., "Etude de l'influence de la température sur la limite
élastique des alliages durcis par phase ordonnée et cohérente", C.R.A.S., 265, Series C, 1414,
1967.
4.
Pineau, A., Castagné, J.L and Lecroisey, F., "Influence de la distribution des tailles des particules
sur la limite élastique d'alliages durcis par précipitation cohérente et ordonnée", C.R.A.S., 266,
510, 1968.
5.
Cozar, R., Rigaut, G. and Pineau, A., "Durcissement par précipitation d'un alliage Fe-30 % , Ni-9
% Ta", Scripta Met., 3, 883, 1969.
6.
Pineau, A., Cozar, R. and Sindzingre, M., "Verbesserung der mechanischen Eigenschaften von
Stählen durch Verformung im metastabilen Austenit bereich Ausformung", Harterei Technik und
Wärmebehandlung, 12, 663, 1969.
7.
Pineau, A., Lecroisey, F., Castagné, J.L. and Sindzingre, M., "Etude de la limite élastique d'un
alliage durci par précipitation cohérente et ordonnée", Acta Met., 17, 905, 1969.
8.
Baudier, F., Pineau A., "Influence des contraintes de cohérence sur le durcissement par
précipitation cohérente et ordonnée", Scripta Met., 3, 757, 1969.
9.
Paqueton, H.; Sénicourt, D. and Pineau, A. "Amélioration des propriétés mécaniques d'un acier
peu allié (35CD4) par écrouissage avant, pendant et après la transformation perlitique isotherme
(Isoforming)", Mém. Scient. Rev. Metall., 66, 693, 1969.
10. Abrassart, F., Lecroisey, F. and Pineau, A. "Influence de la transformation martensitique sur la
plasticité de l'austénite en cours de déformation", Mém. Scient. Rev. Metall., 66, 805, 1969.
11. Paqueton, H., Pineau, A., "Acceleration of pearlite spheroïdization by thermomechanical
treatment", J.I.S.I., 991, 1971.
12. Lecroisey, F., Pineau, A., "Martensitic transformations induced by plastic deformation in the FeNi-Cr-C system", Met. Trans., 3, 387, 1972.
13. Pineau, A., Van Swam, L. and Pelloux, R., "Cyclic stress-strain behavior of a stainless steel in the
Ms-Md range", Scripta Met., 7, 657, 1973.
14. Cozar, R., Pineau, A., "Influence of coherency strains on precipitate shape in a Fe-Ni-Ta alloys",
Scripta Met., 7, 851, 1973.
15. Cozar, R., Pineau, A., "Morphology of Y' and Y" precipitates and thermal stability of Inconel 718
type alloys", Met.. Trans., 4, 47, 1973.
Mai 2012
7
16. Rémy, L., Lecroisey, F. and Pineau, A. "Déformation plastique d'alliages Co-Ni-Cr et Co-Ni-CrMo", Mém. Scient. Rev. Metall., LXX, 589, 1973.
17. Pineau, A., Pelloux, R., "Influence of strain-induced martensitic transformations on fatigue crack
growth rates in stainless steels", Met. Trans., 5, 1103, 1974.
18. Laverroux, M., Pineau, A., "Influence of precipitation in austenite on the morphology of
martensite in Fe-Ni-Co-Ta alloys", Scripta Met., 8, 351, 1974.
19. Cozar, R., Pineau, A., "Influence of the Co/Ni ratio on the γ ' and γ " precipitation in Fe-Ni-Co-Ta
alloys", Met. Trans., 5, 2471, 1974.
20. Rémy, L., Pineau, A., "Observation of stacked layers of twins and ε martensite in a deformed
austenitic stainless steel", Met. trans., 5, 963, 1974.
21. Clavel, M., Fournier D. and Pineau, A., "Plastic zone sizes in fatigued specimens of Inco 718",
Met. Trans., 6A, 2305, 1975.
22. Rémy, L., Sipos, K. and Pineau, A., "Influence of austenite predeformation on mechanical
properties and strain induced martensitic transformations of a high manganese steel,", Met.
Trans., 7A, 857, 1976.
23. Pineau, A., "Mécanismes d'accommodation et de fissuration en fatigue oligo-cyclique",
Mécanique-Matériaux-Electricité, 323-324, 6, 1976.
24. Rémy, L., Pineau, A., "Twinning and Strain-induced FCC → HCP transformation on the
mechanical properties of Co-Ni-Cr-Mo alloys", Mat. Science and Eng., 26, 123, 1976.
25. Pineau, A., "Influence of uniaxial stress on the morphology of coherent precipitates during
coarsening - Elastic energy considerations", Acta Met, 24, 559, 1976.
26. Clavel, M., Fournier, D. and Pineau, A., "Author's reply on the discussion of "Plastic zone sizes in
fatigued specimens of Inco 718", Met. Trans., 7A, 1044, 1976.
27. Rémy, L., Pineau, A., Twinning and strain-induced FCC →HCP martensitic transformation in the
Fe-Mn-Cr-C system, Mat. Science and Eng., 28, 99, 1977.
28. Sipos, K, Rémy, L. and Pineau, A., "Propriétés mécaniques d'un acier Fe-20 Mn-4 Cr-0,5 C à
l'état hypertrempé et prédéformé", Mém. Scient. Rev. Met., 54, 571, 1977.
29. Fournier, D., Pineau, A., "Low cycle fatigue behavior of Inconel 718 at 298K and 823K", Met.
Trans., 8A, 1095, 1977.
30. Baudry, G., Pineau, A., "Influence of strain induced martensitic transformation on the low cycle
behavior of a stainless steel", Mat. Science and Eng., 28, 229, 1977.
31. Baudry, G., McLean, D. and Pineau, A., "Estimating the reversibility of plastic strain during
fatigue with the martensitic transformation", Scripta Met., 11, 987, 1977.
32. Clavel, M., Pineau, A., "Frequency and wave-form effects on the fatigue crack growth behavior of
alloy 718", Met. Trans., 9A, 471, 1978.
33. Hourlier, F., Mc Lean, D. and Pineau, A., "Fatigue crack growth behaviour of Ti-5A1-2,5 Sn alloy
under complex stress (mode I + steady mode III)", Metals Technology, 154, May 1978.
Mai 2012
8
34. Mc Lean, D., Pineau, A., "Grain boundary sliding as a correlating concept for fatigue hold-times",
Metal Science, 313, July 1978.
35. Rémy, L., Thomas, B. and Pineau, A., "Temperature dependence of stacking fault energy in
closed packed Metals and Alloys", Met. Science and Eng., 36, 47, 1978.
36. Lemblé, Ph., Castagné, J.L., Dumoulin Ph., Guttman, M. and Pineau, A., "Temper embrittlement
in 12 % Cr martensitic steel", Metal Science, 496, 1979.
37. Stoltz, R., Pineau,A., "Dislocation-precipitation interaction and cyclic stress-strain behavior of a
γ ' strengthened superalloy",. Met. Science and Eng., 34, 275, 1979.
38. Hourlier, F., Pineau, A., "Fissuration par fatigue sous sollicitations polymodales (Mode I ondulé +
Mode III permanent) d'un acier à rotor 20NCDV14",. Mém. Scient. Revue. Metall., 175, 1979.
39. Castagné, J.L., Pineau, A., "Influence de la rupture intergranulaire associée à la fragilité de revenu
sur la vitesse de propagation des fissures de fatigue dans des aciers martensitiques à 12% Cr",
Mém. Scient. Revue Métallurgie, 1979.
40. Laniesse, J., Aubert, H. and Pineau, A., "Mém. Scient. Rev. Metall.", 741, December 1979.
41. Beremin, F.M. (*), "Calculs élastoplastiques par la méthode des éléments finis d'éprouvettes
axisymétriques entaillées circulairement". Jal de Mécanique Appliquée. 4, n°3, 307-325, 1980.
42. Beremin, F.M. (*), "Influence de la triaxialité des contraintes sur la rupture par déchirement
ductile et la rupture fragile par clivage d'un acier doux". Journal de Mécanique Appliquée, 4, n° 3,
327, 1980.
43. Lemant, F., Pineau, A.,"Mixed mode fracture of a brittle orthotropic material - Example of
strongly textured zinc sheets", Eng. Fract. Mechanics, 14, 91, 1980.
44. Pineau, A., "Review of Fracture Micromechanisms and a local approach to predicting crack
resistance in low strength steels". ICF 5 - Advances in Fracture Research. Edited by D.
François et al., Pergamon Press, Cannes, 29 March-30 April 1981.
45. Clavel, M., Levaillant, C. and Pineau, A., "Influence of micromechanisms of cyclic deformation at
elevated temperature on fatigue behavior", Creep-Fatigue-Environment Interactions. Edited by
R.M. Pelloux and N.S. Stoloff, AIME Publication, 24, 1981.
46. Antolovich, S., Rosa, E. and Pineau, A., "Low Cycle Fatigue of René 77 at Elevated
Temperatures", Materials Science and Eng., 47, 47, 1981.
47. Lautridou, J.C., Pineau, A., "Crack initiation and stable crack growth resistance in A508 steels in
relation to inclusion distribution", Eng. Fract. Mechanics, 15, n°1-2, 55, 1981.
48. Lautridou, J.C., Pineau, A., "Strain distribution and crack tip opening angle observed during
ductile crack initiation and stable crack growth", International Jal of Fracture, 17, R115-R119,
1981.
49. Locicéro, R., Pineau, A., "Description d'un dispositif expérimental pour la conduite d'essais de
fatigue à chaud, à déformation et à effort imposés", Revue Française de Mécanique, n° 78, 67-72,
1981.
* BEREMIN is the name of a research group including: A. Pineau, F. Mudry, J.C. Devaux, Y. D'Escatha and P. Ledermann.
Mai 2012
9
50. Beremin, F.M.(*), "Cavity formation from inclusions in ductile fracture of A508 steel", Met.
Trans, 12A, n° 5, 723-731, 1981.
51. Clavel, M., Pineau, A., "Intergranular fracture associated with heterogeneous deformation modes
during low cycle fatigue in a Ni-base superalloy", Scripta Met., 16, 361-364, 1982.
52. Taillard, R., Thomas, B. and Pineau, A., "The precipitation of the intermetallic compound NiAl in
Fe-19 wt % Cr alloy", Materials Science and Eng., 54, 209-219, 1982.
53. Taillard, R., Pineau, A., "Room temperature tensile properties of Fe-19 wt % Cr alloy
precipitation hardened by the intermetallic compound NiAl", Materials Science and Eng., 56,
219-231, 1982.
54. Clavel, M., Pineau, A., "Fatigue behavior of two Ni-base alloys. Part I : Experimental results on
low cycle fatigue, fatigue crack propagation and substructures", 55, 157-171, 1982.
55. Clavel, M., Pineau, A., "Fatigue behavior of two Ni-base alloys. Part II : Physical modelling of the
fatigue crack propagation process", Materials Science and Eng., 55, 173-180, 1982.
56. Pédron, J.P., Pineau, A., "Crack growth behavior of Inconel 718 at 650°C under fatigue, creep,
and combined loading. Effect of microstructure and environment", Materials Science and Eng.,
56, 143, 1982.
57. Hourlier, F., Pineau, A., "Propagation of fatigue cracks under polymodal fatigue", Fatigue of
Engineering Materials and Structures, 5 , 287-302, 1982.
58. Levaillant, C., Pineau, A., "Assessment of high-temperature low cycle fatigue life of austenitic
stainless steels by using intergranular damage as a correlating parameter", Low cycle fatigue and
life prediction ASTM STP 770, 169-193, 1982.
59. Pédron, J.P., Pineau, A., "Propagation des fissures dans l'alliage Inconel 718 sous diverses
sollicitations : fatigue, fluage et chargements mixtes. Effets de la microstructure et de
l'environnement", Mém. Scient. Revue Métallurgie, 441, September 1982.
60. Maas, E., Pineau, A., "Propagation des fissures par fluage dans l'acier inoxydable austénitique Z3
CND 17-12", Mém. Scient., Revue Métallurgie, 442, September 1982.
61. Beremin, F.M., "A local Criterion for Cleavage Fracture of a Nuclear Pressure Vessel Steel".
Metall. Trans., 14A, 2277, 1983.
62. Pédron, J.P., Pineau, A., "Influence de l'oxydation sur la propagation des fissures à haute
température dans l'alliage Inconel 718", Mém. Scient. Revue Métallurgie, 665, 1983.
63. Bréat, J.L., Mudry, F. and Pineau, A., "Short crack propagation and closure effects in A508 steel",
Fatigue of Eng. Mat. and Structures, 6, n°4, 349-358, 1983.
64. Jacquelin, B., Hourlier, F. and Pineau, A. "Crack initiation under low cycle multiaxial fatigue in
type 316L stainless steel trans. ASME", Jal of Pressure Vessel Technology, 105, 138, 1983.
65. Hourlier, F., Pineau, A., "Influence des défauts géométriques des tubes de pipeline sur leur tenue
en fatigue. Cas de l'effet de toit", Pétroles et Techniques, n° 310, 19, 1984.
66. Clément, P., Angéli, J.P. and Pineau, A., "Short crack Behaviour in nodular cast iron", Fatigue of
Eng. Materials and Structures, 7, 251, 1984.
Mai 2012
10
67. Pédron, J.P., Diboine, A. and Pineau, A, "Fatigue Crack growth rate behavior of stainless steel
claddings in air and under vacuum at 300°C", Fatigue of Eng. Materials and Structures, 7, 137,
1984.
68. Maas, E., Pineau, A., "Creep crack growth behaviour of type 316L steel", Eng. Fracture
Mechanics, 22, 307, 1985.
69. Hourlier, F., Hondt (d'), H., Truchon, M. and Pineau, A, "Fatigue crack path behaviour under
polymodal fatigue", STP 853, 228, 1985.
70. Jacquelin, B., Hourlier, F. and Pineau, A., "Crack initiation under low cycle multiaxial fatigue",
ASTM STP 85, 285, 1985.
71. Marini, B., Mudry, F. and Pineau, A., "Ductile rupture of A508 steel under non radial loading",
Eng. Fracture Mechanics, 22, 375, 1985;
72. Amar, E., Pineau, A., "Interpretation of ductile fracture toughness temperature dependence of a
low strength steel in terms of a local approach", Eng. Fracture Mechanics, 22, 1061, 1985.
73. Mudry, F., Devaux, J.C., Rousselier, G. and Pineau, A., "An experimental program for the
validation of local ductile fracture criteria using axisymmetrically cracked bars and compact
tension specimens", Eng. Fracture Mechanics, 21, n°2, 273-283, 1985.
74. Magnin, T., Pineau, A., "Quelques évolutions récentes dans les méthodes de caractérisation des
propriétés mécaniques des matériaux", Annales des Mines, 1, 35-45, February 1985.
75. Marini, B., Mudry, F. and Pineau, A., "Experimental study of cavity growth in ductile rupture",
Eng. Fracture Mechanics, 22, n°6, 989- , 1985.
76. "Intergranular creep-fatigue crack growth in Ni-base alloys. Flow and facture at elevated
temperatures". Edited by R. Raj. Materials Science Seminar, Philadelphia, USA, 317-348, 1-3
October 1985.
77. Almundheri, M., Soulat, P. and Pineau, A., "Rupture fragile et ductile de l'acier 16MND 15, effet
de l'irradiation". Séminaire international sur l'approche locale de la rupture, Moret sur Loing, 243256, 3-5 June 1986.
78. Amar E., Pineau, A., "Application of a local approach to ductile-brittle transition in a low-alloyed
steel",. Séminaire international sur l'approche locale de la rupture, Moret sur Loing, 221-232, 3-5
June 1986.
79. Henry, M., Marandet, B., Mudry, F. and Pineau, A., "Effets de la température et de la vitesse de
chargement sur la tenacité à rupture d'un acier faiblement allié. Interprétation par des critères
locaux", Journal de Mécanique Théorique et Appliquée, 4, 741-768, 1986.
80. Pineau, A., "Short fatigue crack behavior in relation to three dimensional aspects and crack
closure effects", in "Small Fatigue Cracks". 2nd Engineering Foundation International Conference,
Santa Barbara, Edited by R. O. Ritchie et al., 191-211, 5-10 June 1987.
81. Levaillant, C., Yoshida, M., Piques, R. and Pineau, A., "Creep tests on axisymmetric notched bars
: global displacement measurements and metallographic determination of local strain and
damage", , in "Techniques for multiaxial creep testing", Leatherhead Great Britain, 25-26
September. 1985, Edited by D.J. Gooch, 199-208, 1987.
Mai 2012
11
82. Diboine, A, Pineau,A., "Creep crack intiation and growth in Inconel 718 alloy at 650°C", in
"Fatigue and Fracture of Eng. Mat. and Structures", 10, 141-151, 1987.
83. Soulat, P., Juliet, P. and Pineau, A., "Etude de la fragilité intergranulaire d'un acier 16MND5",
Mémoire Scient. Rev. Métallurgie, 479, September 1987.
84. Amar, E., Pineau, A., "Application of a local approach to ductile-brittle transition in a low-alloyed
steel," "Nuclear Engineering and Design", 105,89-96, 1987.
85. Bensussan, P., Maas, E., Pelloux, R. and Pineau, A. "Creep crack initiation and propagation:
Fracture Mechanics and local approach", Journal of Pressure Vessel Technology, 110, 42-50,
1988.
86. Levaillant, C., Grattier, J., Mottot, M. and Pineau, A., "Creep and creep-fatigue intergranular
damage in austenitic stainless steels: discussion of the creep-dominated regime", Low cycle
Fatigue. ASTM STP 942, Ed. H.D. Solomon, G.R. Halford et al, 414-437, 1988.
87. Pineau, A., "La rupture fragile de pièces mécaniques. Traitement thermique", 220, 1988.
88. Cailletaud, G, Doquet, V. and Pineau, A., "Prediction of macroscopic multiaxial behaviour from
microstructural observations", 3rd International conf. on Bi/Multiaxial fatigue, Stuttgart, 25-1 –
25-19, 3-6 April 1989.
89. Doquet, V., Pineau, A., "Multiaxial low-cycle fatigue behavior of a mild steel", 3rd International
Conf. on Bi/multiaxial fatigue, Stuttgart, 3-6 April 1989.
90. Mudry,F., Di Rienzo, F. and Pineau, A., "Numerical comparison of global and local fracture
criteria in CT and CCP specimens". "Non Linear Fracture Mechanics : II – Elastic Plastic
Fracture". ASTM, STP 995, Edited by J.D. Landes et al., 1989.
91. Devaux, J.C., Mudry, F., Rousselier, G. and Pineau, A., "Experimental and numerical validation
of a ductile fracture local criterion based on a simulation of cavity growth",. "Non Linear Fracture
Mechanics, II. Elastic Plastic Fracture". ASTM, STP 995. Edited by J.D. Landes et al., 1989.
92. Bensussan, P., Piques, R. and Pineau, A., "A critical assessment of global mechanical approaches
to creep crack initiation and creep crack growth in 316L steel", "Non Linear Fracture Mechanics,
II. Elastic-Plastic Fracture". ASTM, STP 995. Edited by J.D. Landes et al., 27-54, 1989.
93. Journet, B., Lefrançois, A. and Pineau, A., "A crack closure study to predict the threshold
behaviour of small cracks". Fatigue and Fracture of Eng. Mat. and Structures, 12, 237-246, 1989.
94.
Mudry, F, Pineau, A., "Discussion .The non-conservatism of the Weibull function when applied
to the statistics of fracture toughness". International Journal of Fracture, 39, R65 - R69, 1989.
95. Al Mundheri, M., Soulat, P. and Pineau, A., "Irradiation embrittlement of a low alloy steel
interpreted in terms of a local approach of cleavage fracture", Fatigue and Fracture of Eng. Mat.
and Structures, 12, 19-30, 1989.
96. Burlet, H, Vasseur, S., Besson, J. and Pineau, A., "Crack growth behaviour in a thermal fatigue
test. Experiments and Calculations",. Fatigue and Fracture of Eng. Mat. and Structures, 12, 123133, 1989.
97. Ehrström, J.C., Andrieu, E. and Pineau, A., "Hydrogen effect on high temperature ductility of
powder metallurgy Al-Fe alloy", Scripta Metallurgica, 23, 1397-1400, 1989.
Mai 2012
12
98. Piques, R., Bensussan, P. and Pineau, A., "Crack initiation and growth under creep and fatigue
loading of an austenitic stainless steel", Nuclear Engineering and Design, 116, 293-306, 1989.
99. Joly, P., Pineau, A., "Local versus global approaches of elastic-plastic fracture mechanics.
Application to ferritic steels and a cast duplex stainless steel", European Symp. on Elastic Plastic
Fracture Mechanics, Elements of defect assessment, Edited by J. G. Blauel and K-H. Schwalbe,
Fribourg, 381-414, October 1989.
100. Doquet, V., Pineau, A., "Extra hardening due to cyclic non proportional loading of an austenitic
stainless steel", Scripta Met., 24, 433-438, 1990.
101. Di Fant, M, Genty, A. and Pineau, A., "Thermal-shock-induced crack arrest of two low alloy
steels", High Temp. Technology, 8, n° 2, , 105-114, May 1990.
102. Pineau, A., "Elevated temperature creep-fatigue cracking in relation to oxidation effects" in
Environment-Induced Cracking of Metals NACE Publication. Editors R.P. Gangloff and M.B.
Ives, 111-112, 1990.
103. Pineau, A., "Assessment procedures for defects in the creep range", ESIS 12, Edited by L.H.
Larsson, MEP, 355-396, 1992.
104. Yoshida, M., Levaillant, C., Piques, R. and Pineau, A., "Quantitative Study of Intergranular
Damage in an Austenitic Stainless Steel on Smooth and Notched Bars", in "High Temperature
Fracture Mechanisms and Mecanics", EGF Publication 6. Edited by P. Bensussan and J.P.
Mascarel, M.E.P., , London, 1-20, 1990.
105. Piques, R., Bensussan, P. and Pineau, A., "Crack initiation and growth under creep and fatigue
loading of an austenitic stainless steel", in "High Temperature Fracture Mechanisms and
Mechanics", EGF Publication 6. Edited by P. Bensussan et J.P. Mascarel, M.E.P., London ,397420, 1990.
106. Burlet, H., Vasseur, S., Cailletaud, G. and Pineau, A., "Fatigue crack growth under
thermomechanical loading - Application to life prediction of centrifugal casting equipment",.
"High Temperature Fracture Mechanisms and Mechanics", EGF Publication 6. Edited by P.
Bensussan and J.P. Mascarel, M.E.P. London, 379-395, 1990.
107. Joly, P., Cozar, R. and Pineau, A., "Effect of crystallographic orientation of austenite on the
formation of cleavage cracks in ferrite in an aged duplex stainless stee"l,. Scripta Metallurgica,
24, 2235-2240, 1990.
108. Piques, R., Molinié, E. and Pineau, A., "Comparison between two assessment methods for defects
in the creep range", Fatigue & Fracture of Eng. Materials and Structures, 14, 871-385, 1991.
109. Molinié, E., Piques, R. and Pineau, A., "Behavior of a 1Cr-1Mo-0.25V Steel after long term
exposure. Part I. Charpy impact toughness and creep properties", 14,531-545, 1991.
110. Molinié, E, Piques, R. and Pineau, A., "Behavior of a 1Cr-1Mo-0.25V Steel after long-term
exposure. Part II. Creep Crack Initiation and Creep Crack Growth",. Fatigue & Fracture of Eng.
Materials & Structures, 14, 547-563, 1991.
111. Doquet, V, Pineau, A., "Multiaxial low cycle fatigue behaviour of a mild steel. "Fatigue under
Biaxial and Multiaxial Loading", ESIS 10, Edited by K. Kussmaul, D. Mc Diarmid and D. Socie,
MEP, 81-101, 1991.
Mai 2012
13
112. Cailletaud, G., Doquet, V. and Pineau, A., "Low cycle multiaxial behaviour of an austenitic
stainless steel. Microstructural observations and micromechanical modelling. Fatigue under
Biaxial and Multiaxial Loading",., ESIS 10, Ed. K. Kussmaul, D. Mc Diarmid and D. Socie,
MEP, 131-149, 1991.
113. Joly, P., Pineau, A., "Local versus global approaches to elastic-plastic fracture mechanics.
Application to ferritic steels and a cast duplex stainless steel. Defects assessment in components Fundamentals and Applications", ESIS/EGP 9. Edited by J.G. Blauel and K-H. Schwalbe, MEP,
381-414, 1991.
114. Molins, R., Andrieu, E. and Pineau, A., "Overaging, deformation and rupture micromechanisms of
Alloy 718 in relation to notch creep rupture strength", Superalloys 718, 625 and various
derivatives. Edited by E. A. Loria, TMS, 589-602, 1991.
115. Pineau, A.,"Creep and creep-fatigue cracking behavior of two structural steels", SMIRT 11, Post
Seminar, Tokyo, 26-27 August 1991.
116. Pineau, A., "Mécanismes et mécanique de la rupture ductile". Conference invitée 12ème Colloque
Français de Mécanique, Paris, 2-6 September 1991.
117. Joly, P., Pineau, A., "Mécanismes et mécanique de la rupture d'aciers austéno-ferritiques moulés
fragilisés par vieillissement", Mém. et études scientifiques. Revue de la Métallurgie, n°9, 527,
September 1991.
118. Weiss, J., Pineau, A., "Continuous and sequential multiaxial low cycle fatigue damages in 316
stainless steel", Symposium on Multiaxial Fatigue, San Diego, California, 14-16 October 1991.
119. Di Fant, M., Fontaine, A. and Pineau, A., "Dynamic crack propagation and crack arrest in a
structural steel : comparison between isothermal and thermal shock tests",. Dynamic Failure of
Materials. Theory, Experiments and Numerics, Edited by H.P. Rossmanith and A.J. Rosaki.
Elsevier Applied Science, 42-56, 1991.
120. Di Fant, M., Fontaine, A., Roux, C and Pineau, A., "Crack Arrest Fracture Toughness
Measurement of an E36 Structural Steel". Revue de Métallurgie, 1144-1149, 1991.
121. Andrieu, E., Molins, R., Ghonem, H. and Pineau, A., "Intergranular crack tip oxidation
mechanism in a nickel based superalloy",. Materials Science & Engineering, A 154, 21-28, 1992.
122. Pineau, A., "Creep - fatigue - oxidation interactions on the high temperature LCF damage of
austenitic stainless steels". LCF 3, Berlin, 178–179, 7-11 September 1992.
123. Weiss, J., Pineau, A., "Microstructure - based simulation of multiaxial low cycle fatigue damage
of 316 L stainless steel in terms of the behaviour of a crack population",. LCF 3, Berlin, 82 – 87,
7-11 September 1992.
124. Andrieu, E., Hochstetter, G., Molins, R. and Pineau, A,. "Oxidation and intergranular cracking
behaviour of two high strength Ni - base superalloys", Corrosion - Déformation - Interaction,
Fontainebleau, 2-5 October 1992.
125. Pineau, A., "Global and local approach of fracture. Transferability of laboratory test results to
components". Edited by A.S. Argon. Topics in Fracture and Fatigue. Springer Verlag, chap 6,
197-234, 1992.
126. Xing, W.S., Jeulin, D. and Pineau, A., "Derivation of Statistical Distribution of Toughness from
Statistical Distribution of Strength." International Journal of Fracture, 61, R11-R17, 1993.
Mai 2012
14
127. Ghonem, H., Nicholas, T. and Pineau, A., "Elevated Temperature Fatigue Crack Growth in Alloy
718 - Part I : Effects of Mechanical Variables",. Fatigue and Fracture of Eng. Materials &
Structures, 16, 565-576, 1993.
128. Ghonem, H., Nicholas, T. and Pineau, A., "Elevated Temperature Fatigue Crack Growth in Alloy
718 - Part II : Effects of environmental and material variables", Fatigue and Fracture of Eng.
Materials & Structures, 16, 577 –590, 1993.
129. Joly, P., Meyzaud, Y. and Pineau, A., "Fracture Micromechanisms of an Aged Duplex Stainless
Steel. Application to the simulation of the fracture of notched tensile and compact tension
specimens",. Mecamat 93. International Seminar on Micromechanics of Materials, Eyrolles, 210221, 1993.
130. Weiss, J., Pineau, A., "Fatigue and creep-fatigue damage of austenitic stainless steels under
multiaxial loading", Conf. Post Smirt, Paris, 22-23 August 1993.
131. Weiss, J., Pineau, A., "Fatigue and creep fatigue damage of austenitic stainless steels under
multiaxial loading", Metallurgical Transactions A., 24A, 2247-2261, 1993.
132. Andrieu, E., Hochstetter, G., Molins, R. and Pineau, A., "Oxidation and intergranular cracking
behaviour of two high strength Ni base superalloys",. Corrosion Deformation Interactions CDI 92.
International Conf. 5-7 October 1992, Fontainebleau, France. Edited by T. Magnin and J.M. Gras.
Ed. de Physique, 461-475, 1993.
133. Zheng, D., Ghonem, H., Andrieu, E. and Pineau, A., "Localized control of crack tip deformation
in nickel-base superalloys in localized damage II", Edited by M.H. Aliabadi, D.J. Cartwright and
H. Nisitani, Computational Mechanics Publications, 1, 67-580, 1993.
134. Joly, P., Meyzaud, Y. and Pineau, A., "Fracture micromechanisms of an aged duplex stainless
steel. Application to the simulation of the fracture of notched tensile and compact tension
specimens in Mécamat 93",. International seminar on micromechanics of materials. Moret sur
Loing, Eyrolles, 210-217, 6-8 July 1993.
135. Weiss, J., Pineau, A., "Continuous and sequential multiaxial low cycle fatigue damage in 316
stainless steel in "Advances in multiaxial fatigue", ASTM STP 1191. Edited by D.L. M. Dowell,
R. Ellis, 183-203, 1993.
136. Videau, J.C., Cailletaud, G. and Pineau, A., "Modélisation des effets mécaniques des
transformations de phases pour le calcul des structures", Journal de physique,. IV-C3, 36ème
colloque de métallurgie, 117-122, February 1994.
137. Argence, D., Weiss, J. and Pineau, A., Observation and modeling of transgranular and
intergranular multiaxial low cycle fatigue damage of austenitic stainless steels", Fourth
International Conference on biaxial/multiaxial fatigue, 309-322, 31 May-3 June 1994.
138. Kantidis, E., Marini, B., Allais, L. and Pineau, A., "Validation of a statistical criterion for
intergranular brittle fracture of a low alloy steel through uniaxial and biaxial (tension-torsion)
tests", International Journal of Fracture, 66, 273-294, 1994.
139. Kantidis, E., Marini, B. and Pineau, A., "A criterion for intergranular brittle fracture of a low
alloy steel", Fat. & Fract. of Eng. Mater. and Structures", 17, 619-633, 1994.
Mai 2012
15
140. Ehrström, J.C., Pineau, A., "Mechanical properties and microstructure of Al-Fe-X alloys",
Materials Science and Engineering A, 186, 55-64, 1994.
141. Pineau, A., "Modelling micromechanisms and statistical features of ductile fracture", ECF10
Structural Integrity : experiments , models, applications, Edited by K.H. Schwalbe and C. Berger,
EMAS, 37-52, 1994.
142. Tigges, D., Piques, R., Frund, J. and Pineau, A., "Shallow crack effect on fracture toughness in a
low alloy steel, in : ECF10, Structural integrity : experiments models, applications", Edited by
K.H. Schwalbe, C. Berger, EMAS, 637-646, 20-23 September 1994.
143. Pineau, A., "Modélisation de la plasticité et de l'endommagement des alliages métalliques",
Journées d'Automne SF2M. Revue de Métallurgie, 1214, September 1994.
144. Jaeckels, H., Iung, T. and Pineau, A., "Dynamic crack propagation and crack arrest behaviour in
relation to brittle intergranular and cleavage fracture", Fat. and Fracture of Eng. Mater. &
Structures, 17, 281-1293, 1994.
145. Lindley, T., Pineau, A., "Short crack effects in fracture and fatigue", Revue de Métallurgie CIT/Science et Génie des Matériaux, 187-201, February 1995
146. Iung, T., Di Fant, M. and Pineau, A., "Résistance et ténacité des aciers pour gazoducs. Cas de
l'arrêt des fissures en rupture par clivage", Revue de Métallurgie - CIT/Science et Génie des
Matériaux, 227-239, February 1995.
147. Pineau, A., "Effect of inhomogeneities in the modelling of mechanical behaviour and damage of
metallic materials. Mechanical Behaviour of Materials", Edited by A. Bakker, Delft University
Press, Delft, The Netherlands, 1-22, 28 May-2 June 1995.
148. Besson, J., Devillers-Guerville, L., Joly, P. and Pineau, A., "Statistical modelling of damaging
duplex stainless steels", IUTAM Symp. "Micromechanics of Plasticity and Damage of Multiphase
Materials", Sèvres, 29 August – 1st Septembre 1995.
149. Gailly, B., Pineau, A., "Dynamic Fracture of Armor Steel,", ECF11 "Mechanisms and Mechanics
of Damage and Failure", Poitiers, I, 669-674, 3-6 September 1996.
150. Achon, P., Pineau, A., "Microstructural Modeling of the Fracture Toughness of 7000 Al Alloys",.
ECF11, "Mechanisms and Mechanics of Damage and Failure", Poitiers, II, 867-872, 3-6
September 1996
151. Bouyne, E., Iung, T. and Pineau, A., Dynamic Crack Propagation and Crack Arrest Behaviour of
two low alloy steels", ". ECF11, "Mechanisms and Mechanics of Damage and Failure", Poitiers,
3-6 Sept. 1996, I, 701-706.
152. Bauvineau, L., Bethmont, M., Burlet, H. and Pineau, A., "Effect of Test Specimen Geometry on
Ductile Fracture Toughness of a C-Mn Steel", ECF11, "Mechanisms and Mechanics of Damage
and Failure", Poitiers, II, 805-810, 3-6 September 1996.
153. Mezière, Y., Champavère, R., Batisse, R., Mokhdani, C. and Pineau, A., "Statistical Modelling of
the Ductile-Brittle Transition of Ferritic Steels", ECF11, "Mechanisms and Mechanics of Damage
and Failure", Poitiers, II, 1375-1380, 3-6 September 1996.
Mai 2012
16
154. Lesoult, G., Pineau, A., "Modélisation et simulation en métallurgie", Instantanés Techniques,
Techniques de l'Ingénieur, 8-10 June 1996.
155. Argence, D., Pineau, A., "Predictive metallurgy applied to creep-fatigue damage of austenitic
stainless steels", The Donald McLean Symposium : Structural Materials : Engineering
Application through Scientific Insight, Edited by E.D. Hondros and M. Mc Lean. The Institute of
Materials, 229-257, 1996.
156. Joly, P., Pineau, A., "Modeling of the effect of thermal aging of duplex stainless steels on their
fracture toughness", Scandinavian Journal of Metallurgy, 24, 226-236, 1996.
157. Bauvineau, L., Burlet, H., Eripret, C. and Pineau, A., "Modelling ductile stable crack growth in a
C-Mn steel with local approaches", Euromech-Mecamat 96. Local Approach to Fracture,
Fontainebleau, 9-11 September 1996.
158. Achon, P., Ehrström, J.C. and Pineau, A., "Modelling ductile fracture of Al alloys in relation with
statistical distribution of second phase particles", Euromech-Mecamat 96. Local Approach to
Fracture, Fontainebleau, C6-3-C6-12, 9-11 September 1996.
159. Renevey, S., Carassou, S., Marini, B., Eripret, C. and Pineau, A., "Numerical modelling of the
ductile-brittle transition". Euromech-Mecamat 96. Local Approach to Fracture, Fontainebleau, 911 September 1996.
160. Poquillon, D., Cabrillat, M.T. and Pineau, A., "Local approach : numerical simulation of creep
and creep-fatigue crack initiation and crack growth in 316L SPH austenitic stainless steel".
Euromech-Mecamat 96, Local Approach to Fracture, Fontainebleau, 9-11 Sept. 1996.
161. Di Fant,M. et al., Pineau, A., "Development of a simplified approach for using the local approach
to fracture", Euromech-Mecamat 96. Local Approach to Fracture, Fontainebleau, 9-11 September
1996.
162. Iung, T., Pineau, A., "Dynamic crack propagation and crack arrest investigated with a new
specimen geometry : Part I, experimental and numerical calculations, Fatigue and Fracture of
Engineering Materials and Structures", 19, 1357-1367, 1996.
163. Iung, T., Pineau, A., "Dynamic crack propagation and crack arrest investigated with a new
specimen geometry, Part II. Experimental study of a low alloy ferritic steel, Fatigue and Fracture
of Engineering Materials and Structures", 19, 1369-1381, 1996.
164. Yahya, O., Pilvin, P. and Pineau, A., "Polycrystalline plasticity and local approcah of
intergranular brittle fracture in A508 steel", ECF11. Mechanisms and mechanics of damage and
failure, Edited by J. Petit et al., EMAS, 759-764, 1996.
165. Besson, J., Devillers-Guerville, L., Joly, P. and Pineau, A., "Statistical modelling of damaging
duplex stainless steels", in IUTAM Symposium on micromechanisms of plasticity and damage of
multiphase materials, Edited by A. Pineau and A. Zaoui, Kluwer, 159-166, 1996.
166. Pineau, A., "High temperature fatigue of Ni base superalloy : microstructural and environmental
effects" in "Engineering against fatigue", Sheffield, 17-21 March 1997.
167. Poquillon, D., Cabrillat, M.T. and Pineau, A., "Creep damage and creep crack initiation under
mode II loading in 316L steel. Experimental data and modelling", SMIRT 14, Lyon, 137-148, 1722 August 1997.
Mai 2012
17
168. Pineau, A., "Modelling of scatter and size effects in ductile and brittle fracture", SMIRT 14, Lyon,
77-88, 619-630, 17-22 August 1997.
169. Pineau, A., "Global and local approaches to fracture".Invited Conference, SMIRT 14, Lyon, 17-22
August 1997.
170. Devillers-Guerville, L., Besson, J. and Pineau, A., "Notch fracture toughness of a cast duplex
stainless steel : modelling of experimental scatter and size effect". Nuclear Engineering and
Design, 168, 211-225, 1997.
171. Raman, G.S., Argence, D. and Pineau, A., "High temperature short fatigue crack behaviour in a
stainless steel", Fatigue and Fracture of Engineering Materials and Structures, 20, n° 7, 10151031, 1997.
172. Poquillon, D., Cabrillat, M.T. and Pineau, A., "Local Approach : numerical simulations of creep
and creep-fatigue crack initiation and crack growth in 316 SPH austenitic stainless steel", Journal
de Physique IV. Colloque C6, Supplément au Journal de Physique III,.6, C6-421 à C6-430, 1997.
173. Baudry, G., Flamand, L., Fougères, R., Hunter, C., Lieurade, H.P. and Pineau, A., "Les aciers
spéciaux. Chapitre : La Fatigue", Edited by G. Béranger, G. Henry, G. Labbe and P. Soulignac,
Lavoisier Tec. & Doc., 1997.
174. Decamp, K., Bauvineau, L., Besson, J. and Pineau, A., "Size and geometry effect on ductile
rupture of notched bars in a C-Mn steel : experiments and modelling", International Journal of
Fracture, 88, 1-18, 1997.
175. Bouche, G., Allais, L., Lezaud, V., Piques, R. and Pineau, A., "Microstructural creep damage
in welded joints of 316L stainless steel", Materials at high temperatures, 15, 403-408, 1998.
176. Yahya, O.M., Piques, R. and Pineau, A., "Effet d’échelle et rupture fragile intergranulaire de
l’acier 16MND5", Journal de Physique IV, 8, Pr4 175 – Pr4 180, June 1998.
177. Sansoz, F., Brethes, B. and Pineau, A., "Short fatigue crack propagation from notches in N18
Ni based superalloy", ECF12, "Fracture from Defects", Sheffield, 61-66, 14-18 September
1998.
178. Benzerga, A., Besson, J., Batisse, R. and Pineau, A., "Anisotropic ductile fracture", "Fracture
from Defects", ECF12, Sheffield, 715-720, 14-18 September 1998.
179. Carassou, S. Renevey, S., Marini, B. and Pineau, A., "Modelling of the ductile to brittle
transition of a low alloy steel", "Fracture from Defects", ECF12, Sheffield, 691-696, 14-18
September 1998.
180. Chabaud, M., Allais, L., Chu, I., Dubuisson, P. and Pineau, A., "Influence of ageing on
intergranular cracking of 321 Heat affected zones", "Fracture from Defects", ECF12 Sheffield,
14-18 Sept 1998, pp.429-434.
181. Bouche, G., Allais, L., Lezaud, V., Piques, R. and Pineau, A., "Modelling of microstructural
creep damage in welded joints of 316 stainless steels", "Fracture from Defects", ECF12,
Sheffield, 357-362, 14-18 September 1998.
182. "Size effects and scatter in ductile fracture". Invited presentation at TC12 Working ESIS group,
"Fracture from Defects", ECF12, Sheffield, 14-18 September 1998.
Mai 2012
18
183. Raoul, S., Marini, B. and Pineau, A., "Effect of microstructure on the susceptibility of A 533
steel to temper embrittlement", Journal of Nuclear Materials, 227, 199-205, 1998.
184. Bouyne, E., Flower, H.M., Lindley, T.C. and Pineau, A., "Use of EBSD technique to examine
microstructure and cracking in a bainitic steel, Scripta Materialia, 39, 295-300, 1998.
185. Yahya, O., Borit, F., Piques, R. and Pineau, A., "Statistical modelling of intergranular brittle
fracture in a low alloy steel", Fatigue and Fracture of Engineering Materials and Structures, 21,
1485-1502, 1999.
186. Pineau, A., "High temperature fatigue of Ni-base superalloys : microstructural and
environmental effects", Engineering against fatigue, Sheffield, 17-21 March 1997, Edited by
A.A. Bakelma, 557-565, 1999.
187. Kim, S., Besson, J. and Pineau, A., "Global and local approaches to fracture normal to
interfaces", International Journal of Solids and Structures, 36, 1845-1864, 1999.
188. Poquillon, D., Cabrillat, M.T. and Pineau, A., "Mode II crack initiation in 316LN stainless
steel : experiments and modelling", Materials at high temperatures, 16, 99-107, 1999.
189. Raoul, S., Marini, B. and Pineau, A., "Rupture intergranulaire fragile d’un acier faiblement
allié induite par la ségrégation d’impuretés aux joints de grains", Journal de Physique IV,
France, 9, 179-184, 1999.
190. Naudin, C., Frund, J.M. and Pineau, A., "Intergranular fracture stress and phosphorus grain
boundary segregation of a Mn-Ni-Mo steel",Scripta Materialia, 40, 1013-1019, 1999.
191. Andrieu, E., Pineau, A., "Study of the coupled phenomena involved in the oxidation assisted
intergranular cracking of Ni based superalloys", Journal de Physique IV, France, 9, 3-11, 1999.
192. Benzerga, A., Besson, J. and Pineau, A., "Coalescence controlled anisotropic ductile fracture",
Journal of engineering materials and technology, 121, 221-229, 1999.
193. Bouche, G., Allais, L., Lezaud, L., Piques, R. and Pineau, A., "Microstructural creep damage in
welded joints of 316L stainless steel", Materials at high temperatures, 15, 403-408, 1999.
194. Bugat, S., Besson, J. and Pineau, A., "Micromechanical modeling of the behavior of duplex
stainless steels", Computational Materials Science, 16, 158-166, 1999.
195. François, D., Zaoui, A. and Pineau, A., "Mechanical behaviour of materials, Vol. I : Elasticity and
Plasticity, Vol. II : Viscoplasticity, Damage, Fracture and Contact Mechanics", Kluwer Academic
Publishers, 1999.
196. Sansoz, F., Brethes, B. and Pineau, A., "Propagation des petites fissures de fatigue dans les zones
de concentration de contraintes dans un superalliage base Ni", Journal de Physique IV, 10, 4.2354.240, 2000.
197. Molins, R., Andrieu, E. and Pineau, A., "Oxydation et propagation des fissures en fatigue-fluage
dans les alliages à base de nickel", Journal de Physique IV, 10, 4.259-4.264, 2000.
198. Pineau, A., "Propagation des fissures par fatigue dans les disques de turbine en Inconel 718 :
effets de la microstructure et de changements complexes". Journal de Physique IV, 10 , 4.2774.282, 2000.
Mai 2012
19
199. Lambert, A., Drillet, J., Gourgues, A.F., Sturel, T. and Pineau, A., "Microstructure of martensiteaustenite constituents in heat affected zones of high strength low alloy steel welds in relation to
toughness properties", Sciences and Technology of Welding and Joining, 5, 168-173, 2000.
200. François, D., Pineau, A., "Fracture of Metals, Part I : Cleavage Fracture, Part II : Ductile
Rupture", Conference on "Physical Aspects of Fracture", Edited by E. Bouchaud et al., NATO
Science Series, 15-33, 2000.
201. Pineau, A., "Fracture of Metals. Part II : Ductile Fracture". Conference on "Physical Aspects of
Fracture", Edited by E. Bouchaud et al., NATO Science Series, 125-146, 2000.
202. Calonne, V., Gourgues,A.F. and Pineau, A., "Influence of Thermal Ageing on Fracture Crack
Growth Behaviour in Cast Duplex Stainless Steels", ECF 13, San Sebastian, Spain, 6-9 September
2000.
203. Bouche, G., Allais, L., Piques, R., Gourgues, A.F. and Pineau, A., "A predictive law to address
creep damage in welded joints of 316 LN stainless steels", ECF 13, San Sebastian, Spain, 6-9
September 2000.
204. Tanguy, B., Piques, R., Laiarinandrasana, L. and Pineau, A., "Notch Stress Strain Distribution in
Charpy V Specimen/Experiments and Modelling", ECF 13, San Sebastian, Spain, 6-9 September
2000.
205. Besson, J., Rivalin, F., Di Fant, M. and Pineau, A., "Modelling of Ductile Tearing of Pipeline Steel Wide Plates", ECF 13, San Sebastian, Spain, 6-9 September 2000.
206. Ponnelle, S., Brethes, B. and Pineau, A., "Orientational Effects on Fatigue Crack Growth Rates in
a Forged Disc of Inconel 718 alloy", ECF 13, San Sebastian, 6-9 September 2000.
207. Tanguy, B., Piques, R., Laianandrasana, L. and Pineau, A., "Mechanical Behaviour of A 508 Steel
Based on Double Non-Linear Viscoplastic Constitutive Equations", Euromat 2000, Tours, 7-9
November 2000.
208. Fréchinet, S., Gourgues, A.F., Forgeron, T., Brachet, J.C. and Pineau, A., "TransformationInduced Plasticity in Zircaloy 4", Euromat 2000, Tours, 7-9 November 2000.
209. Bugat, S., Besson, J. and Pineau, A., "Micromechanical Modelling of the Behaviour of Duplex
Stainless Steels", Euromat 2000, Tours, 7-9 November 2000.
210. Rougier, V., Burlet, H. and Pineau, A., "Tensile Strength of Bimetallic HIP Diffusion Bonds :
Experiments and Numerical Analysis", Euromat 2000, Tours, 1", Edited by D. Miannay, P.
Costa, D. François & A. Pineau, 109-114, 7-9 November 2000.
211. Besson, J., Devillers-Guerville, L. and Pineau, A., "Modelling of Scatter and Size Effect in
Ductile Fracture : Application to Thermal Embrittlement of Duplex Stainless Steels", Eng. Fract.
Mechanics, 67, 169-190, 2000.
212. Besson, J., Pineau, A., "Some new trends in modelling ductile rupture of structural alloys", in
"Continuous Damage and Fracture", Edited by A. Benallal, Elsevier, 281-292, 2000.
213. Fischer, F., Antretter, T., Azzouz, F. and Pineau, A."The role of backstress in phase transforming
steels", Arch. Mech., 52, 569-588, 2000.
Mai 2012
20
214. Parisot, R., Forest, S., Gourgues, A.F., Moreuse, D. and Pineau, A., "Modelling the mechanical
behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet", Computational
Material Science, 19, 189-204, 2000.
215. Rivalin, F., Di Fant, M., Besson, J. and Pineau, A., "Ductile tearing of pipeline-steel wide plates.
I. Dynamic and quasi static experiments", Engineering Fracture Mechanics, 68, 329-345, 2001.
216. Rivalin, F., Di Fant, M., Besson, J. and Pineau, A., "Ductile tearing of pipeline-steel wide plates.
II. Modelling of in-plane crack propagation", Engineering Fracture Mechanics, 68, 347-364,
2001.
217. Ponnelle, S., Brethes, B. and Pineau, A., "High temperature fatigue crack growth rate in Inconel
718 : Dwell effect annihilation", 9th International Spring Meeting, SF2M, Temperature-Fatigue
Interaction, Paris, 29-31 May 2001.
218. Sansoz, F., Brethes, B. and Pineau, A., "Growth and short fatigue cracks from stress
concentrations in N 18 superalloy",. 9th International Spring Meeting, SF2M, TemperatureFatigue Interaction, Paris, 29-31 May 2001.
219. Ponnelle, S., Brethes, B. and Pineau, A., "Orientational effects and influence of delta phase on
fatigue crack growth rates in a forged disc of Inconel 718 superalloy",. 5th International Special
Emphasis on Superalloys 718, 625, 706 and Derivatives, Pittsburgh, 17-20 June, 2001.
220. Bouyne, E., Joly, P., Houssin, B., Wiesner, C. and Pineau, A., "Mechanical and microstructural
investigations into the crack arrest behaviour of a modern 2 1/4 Cr-1 Mo pressure vessel steel",
Fatigue and Fracture of Engineering Materials and Structures, 24, 105-116, 2001.
221. Bugat, S., Besson, J., Gourgues, A.F., N'Guyen, F. and Pineau, A., "Microstructure and damage
initiation in duplex stainless steels", Materials Science and Engineering, A 317, 32-36, 2001.
222. Chabaud-Reytier, M., Allais, L., Poquillon, D., Cäes-Hogrel, C., Mottet, M. and Pineau, A.,
"Modelling creep damage in heat affected zone in 321 stainless steel. Part I : Quantitative study of
intergranular damage, Materials at High Temperatures, 18, 71-80, 2001.
223. Chabaud-Reytier, M., Allais, L., Poquillon, D. and Pineau, A., "Modelling creep damage in heat
affected zone in 321 stainless steel. Part II : Application to creep crack initiation simulations",
Materials at High Temperatures, 18, 82-90, 2001.
224. François, D., Pineau, A., "Fracture of metals. Part I : Cleavage Fracture; Part II : Ductile
Fracture", in "Physical Aspects of Fracture", Edited by E. Bouchaud, D. Jeulin, C. Prioul et S.
Roux, Kluwer Academic Publishers, Nato Science Series, 32, 15-32, 125-146, 2001.
225. Pineau, A., "Fatigue (Multiaxial) Testing. Encyclopedia of Materials": Science & Technology,
Elsevier, 2944–2946, 2001.
226. Pineau, A., Fracture: Cleavage. Encyclopedia of Materials: Science & Technology, Elsevier, 3279
– 3284, 2001.
227. Benzerga, A., Besson, J., Batisse, R. and Pineau, A., "Synergetic effects of plastic anisotropy
and void coalescence on fracture mode in plane strain, Modelling and Simulation", Materials
Science and Engineering, 10, 73-102, 2002.
228. Sansoz, F., Brethes, B. and Pineau, A., "Propagation of short fatigue cracks from notches in a
Ni base superalloy: experiments and modelling", Fatigue and Fracture of Engineering
Materials and Structures, 41-53, 2002.
Mai 2012
21
229. Pineau, A., "The randomness of fatigue and fracture behaviour in metallic materials and
mechanical structures" in "Mechanics of random and multiscale microstrutures" Edited by D.
Jeulin and M. Ostoja-Starzewski. Springer, Wien, New York, 163-219, 2002.
230. Bron, F., Besson, J., Ehrström, J.C. and Pineau, A., "Ductile rupture of 2024 aluminium thin
sheets - Experimental study of damage growth and crack initiation", ECF 14, Cracovie, 9-13
September 2002.
231. Auzoux, Q., Allais, L., Gourgues, A.F. and Pineau, A., "Reheat cracking in austenitic stainless
steels", ECF 14, Cracovia, Poland, 9-13 September 2002.
232. Tanguy, B., Besson, J., Piques, R. and Pineau, A., "Ductile - brittle transition in Charpy and CT
tests - Experiments and modelling", ECF 14, 9-13 September 2002.
233. Alexandre, F., Piques, R., Deyber, S. and Pineau, A., "High temperature creep-fatigue crack
initiation in 718-DA Ni based superalloy", ECF 14, Cracovia, Poland, 9-13 September 2002.
234. Rittel, D., Tanguy, B., Thomas, T. and Pineau, A., "Impact fracture of a ferritic steel in the
lower shelf regime", International Journal of Fracture, 117, 101-112, 2002.
235. Rittel, D., Clisson, J., Rota, L. and Pineau, A., "On testing of Charpy specimens using the onepoint bend impact technique", Experimental Mechanics, 42, 247-252, 2002.
236. Tanguy, B., Besson, J. and Pineau, A., Comment on "Effect of carbide distribution on the fracture
toughness in the transition temperature region of an SA 508 steel", Scripta Materialia, 49, 191197, 2003.
237. Pineau, A., "Practical Application of Local Approach Methods". Practical Failure Assessment
Methods. Comprehensive Structural Integrity, 7. Edited by R.A. Ainsworth and K.-H.
Schwalbe,177-225, 2003.
238. Alexandre, F., Deyber, S. and Pineau, A., "Modelling the optimum grain size on the low cycle
fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites", Scripta
Materialia, 50, 25-30, 2003.
239. Chabaud-Reytier, M., Allais, L., Caas, C., Dubuisson, P. and Pineau, A., "Mechanisms of stress
relief cracking in titanium stabilised austenitic stainless steel", Journal of Nuclear Materials, 323,
123-137, 2003.
240. Calonne, V., Gourgues, A.F. and Pineau, A., "Fatigue crack propagation in cast duplex stainless
steels : thermal ageing and microstructural effects", Fatigue and Fracture of Engineering Materials
and Structures, 27, 31-43, 2004.
241. Parisot, R., Forest, S., Pineau, A., Grillon, F., Demonet, X. and Mataigne, J.M., "Deformation and
Damage Mechanisms of Zinc Coatings on Hot-Dip Galvanized Steel Sheets : Part I. Deformation
Modes. Metallurgical and Materials Transactions, A., 35A, 797-811, 2004.
242. Parisot, R., Forest, S., Pineau, A., Nguyen, F., Demonet, X. and Mataigne, J.M., "Deformation
and Damage Mechanisms of Zinc Coatings on Hot-Dip Galvanized Steel Sheets: Part II : Damage
Modes. Metallurgical and Materials Transactions, A., 35A, 813-823, 2004.
243. Lambert-Perlade, A., Gourgues, A.F., Besson, J., Sturel, T. and Pineau, A., "Mechanisms and
Modeling of Cleavage Fracture in Simulated Heat-Affected Zone Microstructures of a High-
Mai 2012
22
Strength Low Alloy Steel," Metallurgical and Materials Transactions, A, 35, 1039-1053, 2004.
244. Lambert-Perlade, A., Gourgues, A.F. and Pineau, A. "Austenite to bainite phase transformation in
the heat-affected zone of a high strength low alloy steel", Acta Materialia, 52, 2337-2348, 2004.
245. Blazy, J.-S., Marie-Louise, A., Forest, S., Chastel, Y., Awade, A., Grolleron, C., Moussy, F. and
Pineau, A. "Deformation and fracture of aluminium foams under proportional and non
proportional multi-axial loading: statistical analysis and size effect", International Journal of
Mechanical Sciences, 46, 217-244, 2004.
246. Benzerga, A., Besson, J. and Pineau, A., "Anisotropic ductile fracture, Part I : Experiments", Acta
Materialia, 52, 4623-4638, 2004.
247. Benzerga, A., Besson, J. and Pineau, A., "Anisotropic ductile fracture, Part II : Theory", Acta
Materialia, 52, 4639-4650, 2004.
248. Bron, F., Besson, J. and Pineau, A., "Ductile rupture in thin sheets of two grades of 2024
aluminum alloy", Materials Science and Engineering, A380, 356-364, 2004.
249. Kaddour, D., Fréchinet, S., Gourgues, A.F., Brachet, J.C.,Portier, L. and Pineau, A.,
"Experimental determination of creep properties of zirconium alloys together with phase
transformation", Scripta Materialia, 51, 515-519, 2004.
250. Tanguy, B., Besson, Piques, R. and Pineau, A., "Ductile to brittle transition of an A 508 steel
characterized by Charpy impact test. Part I: Experimental results", Engineering Fracture
Mechanics, 72, 49-72, 2005.
251. Tanguy, B., Besson, J., Piques, R. and Pineau, A., "Ductile to brittle transition of an A 508 steel
characterized by Charpy impact test. Part 2: Modeling of the Charpy transition curve",
Engineering Fracture Mechanics, 72, pp. 413-434, 2005.
252. Radu, M., Valy, J., Gourgues, A.F., Le Strat F. and Pineau, A., "Continuous magnetic method for
quantitative monitoring of martensitic transformation in steels containing metastable austenite",
Scripta Materialia, Vol. 52, pp. 525-530, 2005.
253. Allais, L., Auzoux, Q., Reytier, M. and Pineau, A., "Fissuration en relaxation des jonctions
soudées en aciers inoxydables austénitiques". Mécanique et Industries, Vol. 6, pp. 45-54, 2005.
254. Pineau, A., "Development of the local approach to fracture over the past 25 years. Theory and
applications, Invited Conference. International Conference of the Fundamentals of Fracture VII,
Nancy, France, 22-27 May 2005.
255. Sauzay, M., Brillat, H., Monnet, I., Mottot, M., Barcelo, F., Fournier, B. and Pineau, A.,
"Cyclically induced softening due to low angle boundary annihilation in a martensitic steel", Mat.
Science and Engineering, A. Vol. 400-401, pp. 241-244, 2005.
256. Auzoux, Q., Allais, L., Caes, C., Girard, B., Tournié, I., Gourgues, A.F. and Pineau, A.,
"Intergranular damage in AISI 316L(N) austenitic stainless steel at 600°C : Pre-strain and
multiaxial effects", Nuclear Engineering and Design, Vol. 235, pp. 2227-2245, 2005.
257. Pineau, A., "Development of the local approach to fracture over the past 25 years: Theory and
applications", Int. J. Fracture, Vol. 138, pp. 139-166, 2006.
Mai 2012
23
258. Bordet, S., Tanguy, B., Besson, J., Bugat, S. Moinereau, D. and Pineau, A., "Cleavage fracture of
RPV steel following warm pre-stressing: micromechanical analysis and interpretation through a
new model". Fat. Fract. Engng. Mater. Struct., Vol. 29, pp. 799-816, 2006.
259. Fournier, B., Sauzay, M., Caës, C, Mottot, M., Noblecourt, M. and Pineau, A. "Analysis of the
hysteresis loops of a martensitic steel: Part II : Study of the influence of creep and stress
relaxation holding times on cyclic behaviour".Mat. Science & Engineering, Vol. 437, pp. 197211, 2006.
260. Stern, A., Brachet, J.C., Maillot, V. and Pineau, A. “Metallurgical and mechanical behaviour of Zr
base PWR fuel cladding tube after steam oxidation at high temperature up to 1200°C.”
International Symposium “Contribution of Materials Investigations to Improve the Safety and
Performance of LWRs”. Fontevraud, France, September 18-22, 2006.
261. Pineau, A., “Development of the local approach to fracture over the past 25 years: theory and
applications”. Int. J. Fracture, 138, pp. 139-166.
262. Bordet, S., Tanguy, B., Besson, J., Bugat, S., Moinereau, D. and Pineau, A. “Cleavage fracture of
RPV steel following warm pre-stressing: micromechanical analysis and interpretation through a
new model.” Fat. Fract. Engng. Mater. Struct., 29, pp. 799-816, 2006.
263. Fournier, B., Sauzay, M., Caës, C., Mottot, M., Noblecourt, M. and Pineau, A. “Analysis of the
hysteresis loops of a martensitic steel: Part II: Study of the influence of creep and stress relaxation
holding times on cyclic behaviour.” Mat. Sci. & Eng., 437, pp. 197-211, 2006.
264. Pardoen, T., and Pineau, A. “Failure mechanisms of metals” in “Comprehensive Structural
Integrity”, Eds. Milne, I., R.O. Ritchie, B. Karihaloo, 2, chap. 6, pp. 684-797.
265. Stern, A., Brachet, J.C., Maillot, V., Hamon, D., Barcelo, F., Poissonnet, S., Mardon, J.P.,
Lesbros, A. and Pineau, A. “Investigations of the microstructure and mechanical properties of
prior-β structure as a function of the oxygen content in two zirconium alloys.” Journal of ASTM
International, June 2007.
266. Escoffier, B., Chastel, Y., Sudron, B. and Pineau, A. “Physical and mechanical modeling of
ageforming in 7050 Al alloy”. Materials for aerospace applications 3AF, 22nd colloquium, Paris,
November 27-28, 2007.
267. Fournier, B., Sauzay, M., Caës, C., Noblecourt, M., Mottot, M., Bougault, A., Rabeau, V. and
Pineau, A. “Creep-fatigue-oxidation in a 9Cr-1Mo martensitic steel. Part I: Effect of tensile
holding period on fatigue lifetime”. Int. J. of Fatigue, 30, pp. 649-662, April 2008.
268. Fournier, B., Sauzay, M., Caës, C., Noblecourt, M., Mottot, M., Bougault, A., Rabeau, V. and
Pineau, A. “Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part II: Effect of
compressive holding period on fatigue lifetime”. Int. J. of Fatigue, 30, pp. 663-676, April 2008.
269. Fournier, B., Sauzay, M., Caës, C., Noblecourt, M., Mottot, M., Bougault, A., Rabeau, V., Man,
I., Gillia, O., Lemoine, P. and Pineau, A. “Creep-fatigue-oxidation interactions in a 9 Cr-1 Mo
martensitic steel. Part III: Lifetime prediction”. Int. J. of Fatigue, 30, pp. 1797-1812, 2008.
270. Pineau, A., “La fatigue plastique oligo-cyclique” in “Fatigue des matériaux et des structures 1”,
chap. 4, pp. 129-195, Eds. C. Bathias and A. Pineau, Hermes-Lavoisier, 2008.
271. Tanguy, B., Luu, T.T., Perrin, G. Besson, J. and Pineau, A., “Plastic and damage behaviour of a
high strength X100 pipeline steel: Experiments and modeling”. Int. J. of Pressure Vessel and
Piping, 85, pp. 322-335, 2008.
Mai 2012
24
272. Stern, A., Brachet, J.C., Maillot, V., Hamon, D., Barcelo, F., Poissonnet, S., Mardon J.P., Lesbros,
A. and Pineau, A. “Investigations of the microstructures and mechanical properties of prior-β
structure as a function of the oxygen content in two zirconium alloys”. J. of ASTM International,
5, n°4, 2008.
273. Nanga, S., Tanguy, B., Nazé, L., Santacreu, P.O. and Pineau, A. “Plasticity and strain-induced
martensitic transformation in two austenitic stainless steels”. Conf. ICOMAT, Santa Fe, USA,
June 29-July 04, 2008.
274. Devaux, A., Nazé, L., Molins, R., Organista A., Guedou, J.Y., Uginet, J.F., Heritier, P. and
Pineau, A. “Gamma double prime precipitation kinetics in alloy 718”. Mat. Science &
Engineering A, 486, pp. 117-122, 2008.
275. Pineau, A. “Modeling ductile to brittle fracture transition in steels – micromechanical and physical
challenges”. Int. J. Fracture, 150, pp. 129-156, 2008.
276. Antolovich, S., Pineau, A., “Fatigue à haute temperature”, Fatigue des matériaux et des structures
3, Hermes Lavoisier, pp. 19-155, 2009.
277. Fournier, B., Sauzay, M., Caës, C., Noblecourt, N., Mottot, M., Allais, L., Tournié, I., Pineau, A.,
Creep-fatigue interactions in a 9%Cr-1%Mo martensite steel : Part I : Mechanical test results,
Trans.A, Vol. 40A, pp. 321-329, 2009.
278. Fournier, B., Sauzay, M., Barcelo, F., Rauch, E., Renault, A., Cozzika, T., Dupuy, L., Pineau, A.,
Metall. and Materials, Trans.A, Vol. 40A, pp. 330-341, 2009.
279. Dalloz, A., Besson, J., Gourgues-Lorenzon, A.-F., Sturel, T., Pineau, A., Effect of shear cutting on
ductility of a dual phase steel, Eng. Fract. Mechanics, Vol. 76, pp. 1411-1424, 2009.
280. Antolovich, A., Pineau, A., High temperature fatigue of nickel-base superalloys – A review with
special emphasis on deformation modes and oxidation, Eng. Failure Analysis, Vol.16, pp. 22682697, 2009.
281. Brachet, J.C., Vandenberghe, V., Portier, L., Stern, A., Gilbon, D., Mardon, J.P., Hafidi, B.
Pineau, A. Effets des transformations de phases sur le comportement mécaniqeu d’alliages base
zirconium, pendant et après incursion à haute température en ambiance oxydante (vapeur).
Matériaux et Techniques, Volume 97, pp. 87-98, 2009.
282. Auzoux, Q., Allais, L., Caës, C., Monnet, I., Gourgues, A.-F., Pineau, A. Effetct of prestrain on
creep of three AIST 316 austenitic stainless steels in relation to reheat cracking of weld-affected
zones. J. Nuclear Materials, Vol. 400, pp. 127-137, 2010.
283. Pineau, A., Tanguy, B., Advances in cleavage fracture modelling in steels: Micromechanical,
numerical and multiscale asects. Comptes-Rendus Physique, A.S. Volume 11, pp. 316-325, 2010.
284. Pineau, A., Besson, J., Thermal embrittlement of cast duplex stainless steels: Observations and
modelling in “Duplex Stainless Steels”, Eds. I. Alvarez-Armas & Degallaix-Moreuil, ISTE, John
Wiley, chap. 5, pp. 161-208, 2010.
285.Brachet, J.C., Vandenberghe, V., Portier, L., Stern, A., Gilbon, D., Mardon, J.P., Hafidi, B., Pineau,
A., Effets des transformations de phases sur le comportement mécanique d’alliages base
zirconium, pendant et après incursion à haute temperature en ambiance oxydante (vapeur)
Matériaux et Techniques, Vol. 97, pp. 87-98, 2010.
Mai 2012
25
286. Hollner, S., Fournier, B., Le Pendu, J., Cozzika, T., Tournié, I., Brachet, J.C., Pineau, A. High
temperature mechancal properties improvement on modified 9Cr-1Mo martensitic steel through
thermomechanical treatments. J. Nuclear Materials, Vol. 405, pp. 101-108, 2010.
287. Pineau, A., Local approach of brittle fracture in metallic welded structures. J. Japan Welding
Society, Vol. 80, pp. 70-83, 2011.
288. Pineau, A., Antolovich, S. “Fatigue intergranulaire, Chapter 5, in Joints de grains et plasticité
cristalline, pp. 224-288 Ed. L. Priester, 2011.
289. Antolovich, S., Pineau, A. “High temperature fatigue”, Chapter 1, pp. 1-130 in Fatigue of
Materials and Structures, Vol. II, Eds. C. Bathias and A. Pineau, ISTE – J. Wiley, 2011.
290. Pineau, A., Antolovich, S., Fatigue intergranulaire, Chapter 5, pp. 224-288 in : Joints de grains
et plasticité cristalline. Ed. L. Priester, Hermes-Lavoisier, 2011.
291. Huang, M., Pineau, A., Bouaziz, O., Vu, T.D. Recrystallisation induced plasticity in austenite
and ferrite. Mat. Sci. Engineering. A 541, pp. 196-198, 2012.
Mai 2012
26
Referred Proceedings of Conferences and Invited Lectures
1.
Lecroisey, F., Pineau, A., "Transformations martensitiques CFC → CC et CFC→ HC induites par
déformation plastique. Cas du Système Fe-Ni-Cr-C", Relations entre déformation plastique et
transformations de phase, 14ème Colloque de Métallurgie, Saclay, 43, 1971.
2.
Abrassart, F., Lecroisey, F. and Pineau, A. "Martensitic Transformation and Plasticity in the FeNi-Cr-C system", 2nd International Conference on the strength of Metals and Alloys, 905, 1971.
3.
Cozar, R., Pineau, A., "Augmentation de la stabilité structurale par contrôle de la précipitation
dans les alliages dérivés de l'Inconel 718", Le Nickel et son rôle spécifique dans certains types
d'alliages, 18ème Colloque de Métallurgie, Saclay, 601, 1975.
4.
Rémy, L., Sipos, K. and Pineau, A., "Influence of austenite predeformation on the FCC → HCP
strain induced transformation of a Fe-26Mn-0,2C steel", 4th International Conference on the
strength of metals and alloys, 2, 741, 1976.
5.
Pineau, A.,"Study of low fatigue crack growth rate in 316 stainless steel and RR 58 A1 alloy.
ICF5," Waterloo Conference, 1283, 1977.
6.
Petrequin, P., Pineau, A., "La fatigue plastique oligocyclique", Ecole d'Eté France-Québec sur la
fatigue, 1978.
7.
Levaillant, C., Rezgui, B. and Pineau, A., "Effects of environment and hold times on high
temperature low cycle fatigue behavior of 316L stainless steel", ICM3 Conf. Cambridge, August
1979.
8.
Clavel, M., Levaillant, C. and Pineau, A., "Influence of micromechanisms of cyclic deformation at
elevetad temperature on fatigue behavior", Proceedings of the 1979 TMS-AIME Fall Meeting,
Milwaukee, U.S.A., 1979.
9.
Beremin, F.M., (*), "Experimental and numerical study of the different stages in ductile rupture.
Application to crack initiation and stable crack growth", Conf. IUTAM, Ecole Polytechnique,
2,3,4 June, 1980.
10. Beremin, F. M. (*), "Study of the fracture criteria for ductile rupture of A508 steel". ICF.5 Advances in Fracture Research. Edited by D. François et al., Pergamon Press, 809, 1980.
11. Hourlier, F., Pineau, A., "Fatigue crack propagation behavior under complex mode loading". ICF
5 - Advances in Fracture Research, Edited by D. François et al., Pergamon Press, 1833-1840, 29
March-30 April 1981.
12. Pédron, J.P., Pineau, A., "Effect of hold times on the elevated temperature fatigue crack growth
behavior of Inconel 718 alloy". ICF 5 - Advances in Fracture Research. Edited by D. François et
al., Pergamon Press, 2385-2392, Cannes 29 March-30 April 1981.
13. Maas, E., Pineau, A., "Creep crack initiation and growth in an austenitic stainless steel",
Mechanical Behaviour of Materials, IV. Edited by J. Carlsson and N.G. Ohlson. ICM4, 2, 763769, 15-19 August 1983.
* BEREMIN is the name of a research group including : A. Pineau, F. Mudry, J.C. Devaux, Y. D'Escatha and P. Ledermann.
Mai 2012
27
14. Jacquelin, B., Hourlier, F. and Pineau, A., "Amorçage des fissures en fatigue oligocyclique
multiaxiale, Jnées de Printemps de la SFM, 30-52, 22-23 May 1984.
15. Clément, P., Pineau, A., "Amorçage et propagation des petites fissures dans la fonte à graphite
sphéroïdal", Jnées de Printemps de la SFM, 203-218, 22-23 May 1984.
16. Bréat, J.L., Mudry, F. and Pineau, A., "Amorçage et propagation des fissures de fatigue dans des
zones de concentration de contraintes", Journées de Printemps de la SFM, 143-158, 22-23 May
1984.
17. Pineau, A., "Short fatigue cracks and crack closure. Proceedings of the 5th European Conference
on Fracture", 1, 3, Lisbonne, 17-21 September 1984.
18.
Poret, L., Guédou, J.Y. and Pineau, A., "Résistance à la propagation des fissures de l'alliage
Inconel 718", AGARD Conference Proceedings n°368, Engine Cyclic Durability By Analysis
And Testing, 30 May-1 June 1984.
19. Pineau, A., "Creep crack growth in type 316 steel Japan, France Seminar on Fundamental aspects
of mechanical properties and microstructure evolution of stainless steel at high temperature",
Tokyo, 15-18 May 1984.
20. Dabo, P., Levaillant, C., Mottot, M., Grattier, J. and Pineau, A., "Endommagement intergranulaire
d'un acier inoxydable austénitique en fatigue relaxation : influence de la température et du temps
de maintien", P. Dabo et C. Levaillant. "Fatigue à haute température". Journées de Printemps
SFM, Paris, 40-52, 9-11 June 1986.
21. Burlet, H., Cailletaud, G., Pineau, A., "Fatigue thermique d'outillage de coulée par centrifugation",
H. Burlet et G. Cailletaud. "Fatigue à haute température", Journées de Printemps SFM, Paris, 4052, 9-11 June 1986.
22. Piques, R., Bensussan, P. and Pineau, A., "Application of Fracture Mechanics and Local
Approach to Creep Crack Initiation and Growth", Fracture control of engineering structures" –
ECF 6, Edited by H. Van Elst and A. Bakker, Amsterdam, 91-100, 19-20 June 1986.
23. Levaillant, C., Yoshida, M., Piques, R. and Pineau, A., "Metallographic measurements and
metallographic determination of local strain and damage", in "Techniques for multiaxial creep
testing". Leatherhead, Great Britain, 199-208, 25-26 September 1986.
24. Lefrançois, A., Clément, P. and Pineau, A., "The growth of short fatigue cracks in an aluminium
alloy in relation to crack closure effect", A. Fatigue of engineering materials and structures,
University of Sheffield, 59-66, 15-16 September 1986.
25. Burlet, H., Cailletaud, G. and Pineau, A., "Fatigue thermique d'outillages de coulée par
centrifugation", Fatigue à haute température". Journées de Printemps de la Société Française de
Métallurgie", 9-11 June 1986, 457-489, 1987.
26. Burlet, H., Vasseur, S., Cailletaud, G. and Pineau, A., "Fatigue crack growth under
thermomechanical loading. Application to centrifugation cast tools",. Séminaire International sur
les mécanismes et la mécanique de la rupture à haute température, 13-15 October, Dourdan, 1987.
27. Yoshida, M., Levaillant, C., Piques, R. and Pineau, A., "Quantitative study of intergranular
damage in an austenitic stainless on smooth and notched bars",. International Seminar on High
Temperature Fracture – Mechanisms and Mechanics, 13-15 October, Dourdan, I. 1 – I.17, 1987.
Mai 2012
28
28. Piques, R, Bensussan, P. and Pineau, A.,"Crack initiation and growth under creep and fatigue
loading of an austenitic stainless steel", International Seminar on High Temperature FractureMechanisms and Mechanics, IV.53 – IV.70, Dourdan, 13-15 October, 1987.
29. Piques, R., Pineau, A., "Creep crack growth in an austenitic stainless steel", 9th SMIRT Conf.,
Session L5, Lausanne, 7-21 August 1987.
30. Piques, R., Pineau, A., "Creep and creep-fatigue crack initiation in 316 stainless steel", 6th PostSMIRT Seminar, Paris, 24-25 August, 1987.
31. Pineau, A., "Global and local approaches of creep crack initiation and growth", 5th International
Conf. On Mechanical Behaviour of Materials, 75-86, Pékin, 3-6 June 1987.
32. Lefrançois, A., Pons, G., Aliaga, D. and Pineau, A., "A comparative study of the growth rate
behaviour of short and long, bi- or tridimensionnal fatigue cracks, under constant and variable
amplitude loading",. "Fatigue crack growth under variable amplitude loading", 1, Edited by J.
Petit et al, 1-23, 1988.
33. François, D., Hanus, J., Zaoui, A. and Pineau, A., "La mécanique des matériaux, Courrier du
CNRS", "La Mécanique en 1988", , n° 71, 56-58, 1988.
34. Pineau, A., "Approche locale de la mécanique de la rupture. Courrier du CNRS", "La Mécanique
en 1988", n° 71, 65-66, 1988.
35. Pineau, A., "Elevated temperature life predictions methods. Nato ASI "Advances in Fatigue
Science and Technology", Alvor, Algarve, Portugal, 2-15 April, 1988.
36. Pineau, A., "Mechanisms of creep-fatigue interaction. Nato ASI "Advances in Fatigue Science
and Technology", Alvor, Algarve, Portugal, 2-15 April 1988.
37. Andrieu, E., Cozar, R. and Pineau, A., "Effect of environment and microstructure on the high
temperature behaviour of Alloy 718", TMS International Symp. on Superalloy 718, Pittsburgh,
11-14 June 1989.
38. Lefrançois, A., Pineau, A., "Crack closure effect on two aluminium alloys in relation to short
fatigue crack growth behaviour – Comparison between various measurement techniques", ICF7,
Houston, USA. Advances in Fracture Research, 2, 953-961, 1989.
39. Piques, R., Pineau, A., "Global and local approaches of creep crack initiation and growth applied
to an austenitic stainless steel and an aluminium alloy", ICF7, Houston, USA. Advances in
Fracture Research, 2, 1707-1714, 20-24 March 1989.
40. Di Fant, M., Genty, A., Fontaine, A., Bensussan, P. and Pineau, A., "Approche locale appliquée à
la rupture dynamique d'aciers",. IDMAT, La Villette, 9-11 Janvier, Matériaux Science et
Industrie, 331-337, 1989.
41. Doquet, V., Pineau, A., "Amorçage des fissures en fatigue plastique multiaxiale", Ibid, 336-365,
1989.
42. Piques, R., Pineau, A., "Approche locale de la rupture en fluage et fatigue-fluage", Ibid, 366-369,
1989.
43. Di Fant, M., Genty, A. and Pineau, A., "Thermal shock induced crack arrest of two low alloy
steels", Thermal Shock Meeting, Leatherhead, England, 28 September 1989.
Mai 2012
29
44. Di Fant, M., Genty, A. and Pineau, A., "Arrêt de fissure par choc thermique dans des aciers
faiblement alliés", 32ème Colloque de Métallurgie INSTN, Saclay, 20-21 June 1989.
45. Joly, P., Pineau, A., "Micromécanismes de rupture d'un acier austéno-ferritique vieilli", Ibid,
1989.
46. Pineau, A., "La nécessité croissante de la prise en compte de la nocivité des défauts pour le calcul
et la conception des disques de turbomachines". Science et Défense 90, Nouvelles avancées
scientifiques et techniques, Dunod, 169-179, 1990.
47. Pineau, A., "Superalloys disc durability and damage tolerance in relation to inclusions". High
Temperature Materials for Power Engineering, Liège, 24-27 September 1990.
48. Piques, R., Pineau, A., "Global and local approaches to creep crack initiation and creep crack
growth", IUTAM Conf. Creep in Structures IV,10-14 September, Cracovie, Pologne, 1990.
49. Ehrström, J.C., Faure, J.F. and Pineau, A., "Relations entre la microstructure et la ténacité
d'alliages Al-Fe-X élaborés par métallurgie des poudres",. Colloque sur la maîtrise des propriétés
des métaux frittés par leur microstructure, Paris, 19-21 mars 1990.
50. Andrieu, E., Ghonem, H. and Pineau, A., "Two-stage crack tip oxidation mechanism in Alloy
718", The Winter Annual Meeting of the ASME, Dallas, Texas, Elevated Temperature Crack
Growth, ASME publ. MD - 18. Edited by S. Mall and T. Nicholas, 25-30 November 1990.
51. Hourlier, F., Pineau, A., "Influence des défauts géométriques des tubes d'oléoducs sur leur tenue
en fatigue. Etude d'une rupture en service provoquée par un effet de toit",. Journées de Printemps
de la SFM. Paris, 223-232, 28-29 May, 1991.
52. Joly, P., Pineau, A., "Mécanismes et mécanique de la rupture d'aciers austénoferritiques moulés
fragilisés par vieillissement". Journées d'Automne de la SF2M, 8-10 October 1991.
53. Pineau, A., "Mechanisms of fatigue crack propagation and damage tolerance design in high
performance alloys", 2nd ASM International Conf., Paris, 11-13 September 1991.
54. Pineau, A.,"Mécanique de la rupture en viscoplasticité et nocivité des défauts à haute
température". Journées SFM sur l'Intégrité des Structures, Paris, 18-19 April 1991.
55. Piques, R, Molinié, E. and Pineau, A., "Mécanique linéaire et non linéaire de la rupture. Ténacité
statique des matériaux". Journées d'études du GAMI, 16-17 April 1991.
56. Pineau, A.,"Mechanisms of fatigue crack propagation and damage tolerance design in nickel base
alloys". ASM International Conférence, Synthesis, Processing and Modelling of Advanced
Materials, Paris, 11-13 September 1991.
57. Piques, R., Molinié, E. and Pineau, A., "Crack initiation and growth under creep and creep fatigue
loading of 1 Cr – 1 Mo- 0, 25 V steel". Annales de Mécanica de la Fractura Aiguablava, Girona,
Spain, 1-3 April 1992.
58. Joly, P., Meyzaud, Y. and Pineau, A., "Micromechanisms of fracture of an aged duplex stainless
steel containing a brittle and a ductile phase. Development of a local criterion of fracture". Symp
on the application of local fracture-damage models to engineering problems, ASME Summer
Mechanics, Materials & Aerospace Meeting, Scottsdale, Arizona, USA, April 28 - May 7 1992.
59. Joly, P., Pineau, A., "Observation and modelisation of the mechanisms of fracture of an aged
duplex stainless steel", ESIS Conf., Varna, Bulgaria, 21-25 September 1992.
Mai 2012
30
60. Iung, T., Di Fant, M. and Pineau, A., "Dynamic fracture & crack arrest behaviour of a pipeline
steel investigated with a new specimen geometry : the ring test", ESIS Conf., Varna, Bulgaria ,2125 September 1992.
61. Kantidis, E., Marini, B., Soulat, P. and Pineau, A., "The application of a local approach to
intergranular brittle fracture of low alloy steel", ESIS Conf., Varna, Bulgaria, 21-25 September
1992.
62. Joly, P., Pineau, A., "A stochastic model simulating the reduction of tensile ductility and of
fracture toughness in an aged duplex stainless steel",. Workshop on Monte-Carlo methods and
microstructural damage accumulation, EPFL, Lausanne, Switzerland, 6-7 May 1993.
63. Pineau, A., "Plasticité et endommagement des alliages métalliques. Effet des hétérogénéités".
Conf. Portevin SF2M, 27 May 1993.
64. Videau, J.C., Cailletaud, G. and Pineau, A., "Modélisation des effets mécaniques des
transformations de phases pour le calcul des structures",. Colloque Métallurgie INSTN, June
1993.
65. Tigges, D., Piques, R. and Pineau, A., "Shallow crack effect on fracture toughness in a low alloy
steel",. ESIS TCI. Elasto-Plastic Fracture Mechanics Meeting, Paris, May 6-7, 1993.
66. Zaoui, A., François, D. and Pineau, A., "Ingenierie des Matériaux : l'exemple des matériaux
composites",. Conférence Dassault. Collège de l'Ecole Polytechnique, 13 October 1993.
67. Hochstetter, G., Molins, R., Clad, T., Andrieu, E. and Pineau, A., "Influence de la microstructure
et de l'environnement sur la propagation des fissures à haute température dans l'alliage N18",
Séminaire SNECMA : "Evolutions microstructurales des superalliages base nickel lors de
cyclages thermiques", 22 September 1993.
68.
Iung, T., Pineau, A., "Une expérience originale pour l'étude de la propagation et de l'arrêt d'une
fissure en clivage dans un acier ferritique : le test de l'anneau", Journées DYMAT, Arcueil, 8-9
February 1994.
69.
Pineau, A., "Global and Local Approaches to Fracture of Temper-Embrittled A508 steel",
Stuttgart MPA, 21 January 1994.
70.
Pineau, A., "Rupture ductile des alliages métalliques - Effets multiéchelles et statistiques", ENS
Lyon, 25 April 1994.
71.
Pineau, A., "Mécanismes et mécanique de la rupture des aciers : les effets d'échelle", Journées
d'Automne SF2M. Revue de Métallurgie, 1202, September 1994.
72.
Pineau, A., "Global and Local Approaches to Brittle Fracture of Ferritic Steels", The 25th Israel
Conference on Mechanical Engineering, Technion-Haïfa, Israël, 8-15, 25-26 May 1994.
73.
Zaoui, A., Pineau, A., "Ingéniérie des matériaux : la conception des matériaux de structures",
Collège de Polytechnique, Paris, 17 November 1994.
74. Devillers-Guerville, L., Besson, J. and Pineau, A., "Matériaux plastiques endommageables : prise
en compte de l'hétérogénéité de microstructure", 2ème Colloque national en calcul des structures,
Giens, Var, France, 16-19 May 1995.
Mai 2012
31
75. Batisse, R., Mezière, Y., Mokdani, C. and Pineau, A., "A fatigue crack initiation criterion for the
assessment of the residual life in gas transmission pipelines with "gauge only" or "gauge in dent",.
EPRG/PRC, 10th Biennal Joint Technical Meeting on Line Pipe Research, London, 18-21 April
1995.
76. Joly, P., Pineau, A., "Modelling of the effect of thermal aging of duplex stainless steels on their
fracture toughness",. French Swedish Seminar on Stainless Steels and Powder Metallurgy
Materials, Edited by H. Nordberg, Gysinge, Sweden, 53-59, 17-18 May 1995.
77. Argence, D., Pineau, A., "Predictive metallurgy applied to creep fatigue damage of austenitic
stainless steels", Structural Materials Conference, NPL London, 25-26 April 1995.
78. Pineau, A., "Rôle et modélisation des effets des hétérogénéités microstructurales dans
l'endommagement et la rupture des matériaux métalliques". Séminaire de Mécanique Ile de
France Sud, 4 May 1995.
79. Videau, J.C., Cailletaud, G. and Pineau, A., "Experimental study of the transformation-induced
plasticity in a Cr-Ni-Mo-Al-Ti steel", Mecamat, La Bresse 16-19 May 1995.
80. Batisse, R., Mezière, Y., Mokhdani, C. and Pineau, A., "Fatigue cracking from a notch : effects of
residual stresses", IGFR, Cannes, 6-8 November 1995.
81. Pineau, A., "Defect assessment procedures in the creep range". NATO ASI Course, Sesimbra,
Portugal, 12-22 September 1995.
82. Pineau, A., "Fatigue and creep-fatigue behaviour of Ni base superalloys", NATO ASI Course,
Sesimbra Portugal, 12-23 September 1995.
83. Pineau, A., "Modelling of low-cycle fatigue and creep-fatigue interactions at high temperature in
austenitic stainless steels". NATO ASI Cours, Sesimbra, Portugal, 12-22 September 1995.
84. Pineau, A., "Maitrise de la fatigue et de la rupture des matériaux et des structures", 20 ans SPI,
CNRS, Snat, 2 November 1995.
85. Pineau, A., "Aproximationes Global y Local de la Fractura Ductil." Invited Conference, "3rd
Iberic Conference on Fracture". Luso, Portugal, 27-29 March 1996.
86. Ehrström, J.C., Achon, P., Hébert, J.F. and Pineau, A., "Microstructural Modelling of Fracture
Toughness of Al Alloys". Fifth International Conference on Al. Alloys, Grenoble, 1-5 July 1996.
87. Rivalin, F., Iung, T., Di Fant, M. and Pineau, A., "Dynamic Ductile Tearing in High Strength
Pipeline Steels", International Pipeline Conference, Calgary, Canada, 9-14 June 1996.
88. Benzerga, A., Besson, J. and Pineau, A., "Modèle couplé comportement-endommagement ductile
de tôles anisotropes", 3ème Colloque National en Calcul des Structures, Giens, Var, France, 2,
673-678, 20-23 May 1997.
89. Yahya, O., Piques, R. and Pineau, A., "Approche locale de la rupture fragile intergranulaire de
l'acier 16MND5", Réunion Mécamat, Bordeaux, 14-15 May 1997.
90. Besson, J., Pineau, A., "Numerical simulation of ductile rupture : analysis of experimental scatter
and size effect." Conference invitée, Symposium : "Recent advances in Fracture". TMS Meeting
Orlando, Fl., USA, 9-13 February 1997.
Mai 2012
32
91. Pineau, A., "Micromécanique de l'endommagement dans les matériaux hétérogènes", Séminaire
Lausanne, EPFL, 23 May 1997.
92. Pineau, A., "Micromechanics of Plasticity and Damage in Heterogeneous Materials", Invited
Conference, EUROMAT 97, Maastricht, 21-23 April 1997.
93. Devillers-Guerville, L., Besson, J., Trobada, I. and Pineau, A., "Notch Fracture Toughness of a
Cast Duplex Stainless Steel : Scatter and Size Effects - Experiments and Modelling",
Transfronterra sobre la Mecanica i la Fisica de los Aliages Bifasicos, Barcelona, Spain, 4-5 July
1997.
94. Pineau, A., Rivalin, F. and Besson, J., "Plane and shear fracture of rolled sheets", 30th ESIS TC1
Plenary Meeting, Saclay, France, 27-28 October 1997.
95. Pineau, A., Benzerga, A. and Besson, J., "Modeling of the ductile rupture of anisotropic rolled
sheets", 30th ESIS TC1 Plenary Meeting, Saclay, France, 27-28 October 1997.
96. Pineau, A., "Ténacité des aciers de construction". Journées d'Automne SF2M, Paris, 25-27
November 1997.
97.
Chabaud, M., Allais, L., Dubuisson, P., Hogrel, C. and Pineau, A., "Ageing and cracking of
simulated heat affected zones in welded 321 stainless steel", HIDA Conference, Saclay, W-51-W-5-7, 15-17 April 1998.
98.
Poquillon, D., Cabrillat, M.T., Michel, B. and Pineau, A., "Local approach applied to creepfatigue crack initiation and crack growth in circumferentially notched 316L tubes under
combined tension and cyclic thermal shocks", HIDA Conference, Saclay, S6-43-1 – S6-43-7,
15–17 April 1998.
99.
Pineau, A., "Plasticity and fracture of inhomogeneous ductile metallic materials". Invited
Conference, European Research Conference on "Plasticity of Materials, Fundamentals,
Modelling and Application" Granada, 25-30 April 1998.
100. Pineau, A., "Modelling of scatter and size effects in fracture. First Israël – France Bi-National
Workshop on "Failure of Materials", Kyriat Anavim, Israël, May 11-12, 1998.
101. Raoul, S., Marini, B. and Pineau, A., "Rupture intergranulaire fragile d’un acier faiblement
allié induite par la ségrégation d’impuretés aux joints de grains", 41ème Colloque de
Métallurgie, INSTN, Saclay, 1998.
102. Devillers-Guerville, L., Besson, J. and Pineau, A., "Thermal embrittlement of duplex stainless
steels modelling and metallurgical factors", Colloque franco-suédois sur les aciers inoxydables,
les aciers à outils et la métallurgie des poudres, Le Creusot, 23-24 September 1998.
103. Pineau, A., "Advanced integrity analysis using local approach to fracture", Symposium MPA,
Stuttgart, in honour of Pr K. Kussmaul, 7 October 1998.
104. Yahya O., Piques, R. and Pineau, A., "Statistical modelling of intergranular brittle fracture in A
508 steel", HSE/TWI Structural Integrity Seminar, Abington, Cambridge, UK, 21 October
1998.
105. Devillers-Guerville, L., Besson, J. and Pineau, A., "Modelling of scatter and size effects in
ductile rupture of thermally embrittled duplex stainless steels", HSE/TWI Structural Integrity
Seminar, Abington, Cambridge, UK, 21 October 1998.
Mai 2012
33
106. Bouche, G., Allais, L., Béchade, J.L., Piques, R. and Pineau, A., "Solidification du métal d'apport
pour les joints soudés d'acier inoxydable austénitique", 42e Colloque INSTN, Matériaux pour
machines thermiques, Saclay, INSTN, 22-24 June 1999.
107. Bugat, S., Besson, J., Gourgues, A.F., N’Guyen, F. and Pineau, A., "Microstructure and
damage initiation in duplex stainless steels", TMS Meeting, San Diego, 1-4 March 1999.
108. Fréchinet, S., Gourgues, A.F. and Pineau, A., "Comportement mécanique et changement de
phase des gaines de combustible en Zircaloy-4", Journées Hexagonales II, Metz, November
1999.
109. Fréchinet, S., Gourgues, A.F., Rousselot, M. and Pineau, A., "Comportement mécanique et
changement de phase des gaines de combustible en Zircaloy-4", Colloque MECAMAT,
Aussois, January 1999.
110. Fréchinet, S., Gourgues, A.F., Rousselot, M. and Pineau, A., "Comportement mécanique et
changement de phase des gaines de combustible en Zircaloy-4", 14e Congrès Français de
Mécanique, Toulouse, 30 August–3 September 1999.
111. Pineau, A., "Développement d’aciers pour gazoducs à haute limite d’élasticité et ténacité
élevée. Mécanique et mécanismes de la rupture ductile à grande vitesse", Invited Conference,
Journée du groupe de contact du FNRS, ULB, Bruxelles, 12 May 1999.
112. Pineau, A., "Défis posés par les matériaux à haute température", Colloque scientifique : "Les
matériaux pour applications à haute température", SF2M, Lille, 2 December 1999.
113. Ponnelle, S., Brethes, B. and Pineau, A., "Propagation des fissures par fatigue dans les disques
de turbine en Inconel 718 : Effets de la microstructure et de chargements complexes", 42e
Colloque INSTN, Matériaux pour machines thermiques, Saclay INSTN, 22-24 June1999.
114. Ponnelle, S., Pineau, A., "Effet de la microstructure et de l'environnement sur la propagation
des fissures par fatigue dans les superalliages base nickel", 14e Congrès Français de
Mécanique, Toulouse, 30 August–3 September 1999.
115. Sansoz, F., Brethes, B. and Pineau, A., "Propagation des petites fissures de fatigue dans les
zones de concentration de contraintes dans un superalliage base Ni", 42e Colloque INSTN,
Matériaux pour machines thermiques, Saclay INSTN, 22-24 June 1999.
116. Pineau, A., "Alliages métalliques pour conditions extrêmes". Université de Tous les Savoirs.
Qu'est-ce que les technologies ? 5, Editions Odile Jacob, 426-438, March 2001.
117. Naudin, C., Frund, J.M. and Pineau, A., "Toughness modelling of PWR vessel steel containing
segregated zones", 10th conference on Environmental Degradation of Materials in Nuclear Power
Systems - Water Reactors, Lake Tahoe, Nevada, USA., 5-9 August 2001.
118. Pineau, A., "Application of the Local Approach to Ductile-Brittle Transition in Ferritic Steels".
Invited conference - Proceedings, 8th Portuguese Conference on Fracture, Vila Real, Portugal,
93-107, 20-22 February 2002.
119. Pineau, A., "Microstructure and Mechanical Properties of Structural Materials". European
workshop on funding of materials modelling, Geesthacht, Germany, 14-15 March 2002.
120. Auzoux, Q., Allais, L., Gourgues, A.F. and Pineau, A., "Fissuration en relaxation des aciers
inoxydables austénitiques an voisinage des soudures", Colloque de métallurgie, INSTN, 25-27
June 2002.
Mai 2012
34
121. Pineau, A., "Endommagement et rupture en fatigue de matériaux métalliques hétérogènes",
Invited Conference, Matériaux 2002, Tours, 21-25 October 2002.
122. Pineau, A., "Local Approach to Fracture : Past, Current, Future. Invited Conference, ICM9,
Geneva, Switzerland, 26-29 May 2003.
123. Alexandre, F., Deyber, S., Ponnelle, S. and Pineau, A., "Relation Microstructure - DDV en fatigue
oligocyclique des disques de turbines en Inco 718", Journées de Printemps SF2M, Fatigue et
Procédés de Fabrication, Senlis, 10(1) – 10(8), 21-22 May 2003.
124. Tanguy, B., Besson, J. and Pineau, A., "Modélisation de l’essai Charpy : application à la transition
ductile-fragile d’un acier bainitique 16MND5", Journées d’Automne SF2M, 28-29 October 2003.
125. Bron, F., Besson, J. and Pineau, A., "Simulation de la déchirure ductile de tôles d’aluminium en
alliage 2024", Journées d’Automne SF2M, 28-29 October 2003.
126. Brillat, H., Sauzay, M., Monnet, I., Mottot, M., Barcelo, F. and Pineau, A., "Etude
micromécanique du comportement oligocyclique d’un acier martensitique", Journées d’Automne
SF2M, 28-29 October 2003.
127. Pineau, A., "L'essor technologique des matériaux. La Science au Présent 2004." Encyclopedia
Universalis, 18-19, 2004.
128. Alexandre, F., N'Guyen, F. and Pineau, A. Modélisation micromécanique et probabiliste de
l'endommagement par fatigue d'un superalliage, l'Inco 718. Communication orale aux Journées
Thématiques MECAMAT, ENPC, Champs-sur-Marne, 1st and 2nd June 2004.
129. Pineau, A. Mechanisms of Damage, in :"Local Approach to Fracture", Ecole d'Eté "Mécanique de
l'endommagement et approche locale de la rupture" (MEALOR), Ed. J. Besson, Presses de l'Ecole des
Mines de Paris, 33-78, 2004.
130. Benzerga, A.A., Besson, J. and Pineau, A., "Recent advances in modeling ductile rupture", ICF11,
Turin, Italy, 20-25 March 2005.
131. Benzerga, A.A., Besson, J. and Pineau, A., "How much input is needed from the microstructure to
model ductile rupture", ICF11, Turin, Italy, 20-25 March 2005.
132. Fournier, B., Sauzay, M., Mottot, M., Brillat, H., Monnet, I. and Pineau, A., "Modélisation
micromécanique du comportement en fatigue oligocyclique haute temperature d'un acier
martensitique", 17ème Congrès Français de Mécanique, Troyes, France, September 2005.
133. Alexandre, F., N'Guyen, F., Deyber, S. and Pineau, A., "A probabilistic micromechanically based
model for fatigue life prediction in 718 alloy", Proceedings of the Ninth International Conference
on Structural Safety and Reliability, ICOSSAR 05, Rome, Italy, 19-23 June 2005.
134. Pineau, A., "Local approach to fracture and ductile to brittle transition of PWR steels", Invited
Conference, NuPEER Symposium. Ageing Issues in nuclear power plants, Dijon, France, 22-24
June 2005.
135. Pineau, A., "Development of the local approach to fracture over the past 25 years. Theory and
Applications, Invited Conference, International Conference of the Fundamentals of Fracture VII,
Nancy, France, 22-27 May 2005.
Mai 2012
35
136. Pineau, A., "Development of the local approach to fracture", Invited Conference, ICF11, Turin,
Italy, 22-25 March 2005.
137. Deyber, S., Alexandre, F., Vaissaud, J. and Pineau, A., "Probabilistic life of DA718 for Aircraft
Engine Disks, TMS, (The Minerals, Metals & Materials Society), Superalloys, 02-05 October
2005.
138. Pineau, A., "Physical metallurgy and mechanical behaviour of 718 alloys", Materials for
aerospace applications", 21st AAAF Colloquium, Paris, France, 22-23 November 2005.
139. Salapete, R., Barlas, B., Nicouleau, E., Massinon, D., Cailletaud, G. and Pineau, A., "Fatigue life
predictions of aluminium cylinder heads", Fatigue Design 2005, Senlis, France, 16-18 November
2005.
140. Tanguy, B., Bouchet, C., Bordet, S., Besson, J. and Pineau, A., "Toward a better understanding of
the cleavage in RPV steels : Local mechanical condition and evaluation of a nucleation enriched
Weibull model and of the Beremin model over a large temperature range". EMMC9 Local
Approach to Fracture, Moret-sur-Loing, France, 9-12 May 2006, pp. 129-134, 2006.
141. Bilat, A.S., Gourgues-Lorenzon, A.F., Besson, J. and Pineau, A., "Microstructures and mechanical
properties of simulated heat affected zones in X 100 pipeline steel girth welds". EMMC9 Local
Approach to Fracture, Moret-sur-Loing, France, 9-12 May 2006, pp. 135-140, 2006.
142. Dalloz, A., Gourgues-Lorenzon, A.F., Besson, J., Sturel, Th. and Pineau, A., "Influence of the
cutting process on damage in dual phase steels". EMMC9 Local Approach to Fracture, Moret-surLoing, France, 9-12 May 2006, pp. 265-270, 2006.
143. Luu, T.T., Tanguy, B., Besson, J., Perrin, G. and Pineau, A., "Local approach based numerical
modeling of fracture of high strength modern pipeline steel". EMMC9 Local Approach to
Fracture, Moret-sur-Loing, France, 9-12 May 2006, pp. 253-258, 2006.
144. Stern, A., Brachet, J.C., Maillot, V. and Pineau, A., "Metallurgical and mechanical behaviour of
Ze base PWR fuel cladding tube after steam oxidation at high temperature up to 1200°C".
International Symposium "Contribution of Materials Investigations to Improve the Safety and
Performance of LWRs", Fontevraud, France, 18-22 September 2006.
145. Pineau, A., "Creep-Fatigue-Oxidation Interactions with Tensile and Compressive Hold Times on a
9 Cr Steel at 550°C", Formulative Expert Workshop on Creep-Fatigue Damage Interactions, July
11-13, 2006 (Hosted by EPRI), Amsterdam, The Netherlands, 2006.
146. Pineau, A., "Ruptures en service et moyens de prevention", Colloque national MECAMAT,
Aussois, 21-26 January 2007. Invited Conference.
147. Pineau, A., "Development of the local approach to fracture over the past 25 years : Theory and
applications", 24th meeting of the Spanish Fracture Group, Burgos, Spain, 21-23 March 2007.
Invited Conference.
148. Dalloz, A., Gourgues-Lorenzon, A.F., Besson; J., Sturel, Th. and Pineau, A., "Shear cutting of
high strength dual phase steels : materials aspects and modelling". Keynote lecture. Material
Models, Hamburg, Germany, 11-12 June 2007. Invited Conference.
149. Pineau, A., "Modeling ductile-to-brittle fracture transition in steels : (micro)mechanical and
physical challenges", ICF Interquadrennial conference, Moscow, Russia, 7-12 July 2007. Invited
Conference.
Mai 2012
36
150. Pineau, A., "Physical and statistical aspects of fracture", CMDS 11, Paris, France, 30 July–3rd
August 2007. Invited Conference.
151. Pineau, A., “Statistical aspects of cleavage fracture in steels. A special emphasis on ductile-tobrittle transition.” Journées thématiques Mecamat, Fontainebleau, France, April 16-17, 2008.
152. Nanga, S., Tanguy, B., Santacreu, P.O. and Pineau, A., « Strain induced martensitic
transformations in two austenitic stainless steels: Macro-Micro behaviour, ECF17, Brno, 2-5
September 2008.
153. Pineau, A., “Modelling ductile to brittle fracture transition in steels”, Conf. “Nuclear Fission and
Fusion Steels: Fundamentals and Applications UKAEA, Culham Science Center, Oxfordshire,
June 08-09, 2009.
154. Pineau, A., “Historical background of impact testing, ICHST, Budapest, 26 July-2nd August 2009.
155. Pineau, A., “Mécanique – Matériaux – Technologies. Maîtrise d’un procédé de mise en œuvre des
aciers : la découpe mécanique par cisaillement », Congrès Français de Mécanique, Marseille, 2428 août 2009.
156. Pineau, A., “Intégrité mécanique des pipelines et gazoducs – Enjeux scientifiques et techniques”,
Séminaire International sur les Technologies Mécaniques, Tlemcen, Algeria, 05-06 December
2009.
157. Nanga, S., Tanguy, B., Nazé, L., Santacreu, P.-O., Pineau, A., « Strain induced martensitic
transformation at high strain rate in two austenitic stainless steels », Dymat 2009, EDP Sciences,
Vol.2, pp. 1023-1029.
158. Pineau, A., “Basics on ductile fracture in metals. Graduate winter school on the micromechanics
of ductile fracture », 26-29 January 2010, UCL Louvain-la-Neuve, Belgian.
159. Pineau, A., “Local approach to fracture (LAF) as a metallurgical and mechanical tool to model
ductile-to-brittle transition (DBT) in structural steels”, ECF18, Dresden, 30 August- 03
September, 2010.
160. Pineau, A., “Brittle fracture and brittle-to-ductile transition in metals – Micromechanics”. Two
courses. Cargese Summer School, Corsica, 7 June – 18 June 2010.
161. Pineau, A., “Alloy 718 and other derivatives based on γ” – precipitation. Chalmers, Sweden, 10
May 2010.
162. Pineau, A., “Alloy 718 – Mechanical performance”, Volvo Aerospace, Sweden, 11 May 2010.
163. Pineau, A., “Fatigue in engineering structures – Case studies”, Euromech 505, Paris, 7-9 July
2010.
164. Pineau, A., “Prévention de l’amorçage et dela propagation des fissures de fatigue dans les organs
mécaniques”. Forum national de la maintenance 2010. 2-5 November 2010. Association
française des ingénieurs de maintenance (AFIM).
165. Pineau, A., « New trends in mechanics of materials », Institute of Problems in Mechanics, Russian
Academy of Sciences, Moscow, Russia, 26-29 September 2011.
- Ductile-to-brittle transition in ferritic steels: Toughening effect of grain boundaries.
- Scatter and size effects in brittle fracture o macroscopically and microscopically inhomogeneous
materials: Theory and applications.
Mai 2012
37
166. Pineau, A. 20th Technical Meeting DYMAT, Paris 7-9 September 2011.
- Fracture toughness-yield strength trade-off – Steels and other materials, including bulk metallic
glasses (BMG)
167. Meeting 3AF, Ecole des Mines, 20 May 2011.
- Rupture fragile par clivage – Transition ductile-fragile dans les aciers ferritiques.
168. Congrès Français de Mécanique ; Besançon, 28 August – 02 September 2011.
- Ténacité des aciers – Effet d’échelle et dispersion – Lien avec la microstructure.
169. 15th International conference on environmental degradationof materials in nuclear power systemswater reactors. August 7-11, 2011, Colorado Springs, Colorado, USA.
- Le Millier, M., Crépin, J., Duhamel, C. Pineau, A. IASCC of stainless steels in a PWR
environment (A combined approach).
170. Congrès Français de Mécanique, Besançon, 28 August – 02 September 2011.
- Andrieu, A., Pineau, A., Ryckelynck, C., Bouaziz, O. Extension of Beremin model to bi-modal
brittle failure.
171. Hollner, S., Fournier, B., Mayr, P., Pineau, A. Thermomechanical improvement of hightemperature mechanical properties of 9-12% martensitic steels for nuclear applications. Proceed.
ICAPP 2011, Nice, May 2- 5, paper 11314, 2011.
172. Pineau, A. Matériaux et Mobilité. Université Libre, Saint-Germain-en-Laye, April 5th, 2012.
173. Pineau, A. Introduction to “Physics and Mechanics of Random Media” Course, Ecole des Mines,
Mines ParisTech, March 19, 2012.
Mai 2012
38
GRADUATE RESEARCH ASSISTANTS
H. PAQUETON (Ingénieur-Docteur)
Formation et propriétés des structures ferrito perlitiques à cémentite globulaire obtenues par traitement
thermomécanique dans le domaine perlitique sur des aciers peu alliés.
(juin 1970)
F. LECROISEY (Docteur ès-Sciences)
Transformations martensitiques induites par déformation plastique dans le système Fe-Ni-Cr-C.
(mars 1971)
F. ABRASSART (Docteur ès-Sciences)
Influence des transformations martensitiques sur les propriétés mécaniques des alliages du système FeNi-Cr-C.
(juin 1972)
M. DOUBLIER (Docteur -Ingénieur)
Etude de la déformation plastique du zinc pur et faiblement allié par laminage et torsion.
(mai 1973)
R. COZAR (Docteur-Ingénieur)
Etude de la précipitation des phases ' (Ll2) et " (DO22) dans les aciers austénitiques fer-nickel-(Co)Ta et des superalliages dérivés de l'Inconel 718.
(avril 1973)
M. LAVERROUX (Docteur-Ingénieur)
Transformation martensitique et propriétés mécaniques d'alliages à base de fer et de nickel durcis par
précipitation.
(décembre 1973)
K. SIPOS (Docteur-Ingénieur)
Influence d'une déformation plastique préalable de l'austénite sur les propriétés mécaniques et les
transformations martensitiques induites par déformation dans le cas d'un alliage Fe-20 % Mn-4 % Cr0,5 % C.
(mai 1975)
L. REMY (Docteur ès-Sciences)
Maclage et transformation martensitique CFC → HC induite par déformation plastique dans les alliages
austénitiques à basse énergie de défaut d'empilement des systèmes Co-Ni-Cr-Mo et Fe-Mn-Cr-C.
(décembre 1975)
D. FOURNIER (Docteur ès-Sciences)
Fatigue plastique d'un alliage base Nickel (Inco 718) durci par précipitation.
(septembre 1977)
G. BAUDRY (Ingénieur-Docteur)
Influence de la transformation martensitique → ' sur le comportement en fatigue plastique d'un
acier inoxydable instable (juin 1978).
D. ALIAGA (Docteur-Ingénieur)
Propriétés mécaniques d'aciers obtenus par frittage forgeage et d'aciers usuels. Influence des inclusions
sur la ténacité (novembre 1978).
Mai 2012
39
R. TAILLARD (Docteur ès-Sciences)
Etude de la précipitation de la phase intermétallique NiAl et du durcissement structural associé dans
des alliages inoxydables ferritiques à 19 % de chrome.
(novembre 1979) (Orsay)
F.X. LEMANT (Docteur-Ingénieur)
Comportement à la rupture d'éprouvettes fissurées sollicitées en mode mixte.
(décembre 1979).
J.C. LAUTRIDOU (Docteur-Ingénieur)
Etude de la déchirure ductile d'aciers à faible résistance. Influence de la teneur inclusionnaire.
(juin 1980)
M. CLAVEL (Docteur ès-Sciences)
Fatigue plastique et fissuration de deux alliages durcis par des précipités cohérents. Etude comparative
des mécanismes.
(décembre 1980) (Université de Technologie de Compiègne).
J.P. ANGELI (Ingénieur)
Etude des conditions de propagation de fissures courtes amorcées à la surface d'une éprouvette lisse.
(février 1982) (C.N.A.M. Paris)
J.L. BREAT (Ingénieur)
Application de la mécanique de la rupture à l'étude de fissures simulant des défauts réels.
(février 1983) (C.N.A.M. Paris)
B. JACQUELIN (Docteur-Ingénieur)
Amorçage des fissures en fatigue oligocyclique sous chargement multiaxial..
(mars 1983) (E.N.S.M.P. Paris)
F. HOURLIER (Docteur ès-Sciences)
Propagation des fissures de fatigue sous sollicitations polymodales.
(mars 1982) (Université de Technologie de Compiègne)
F. MUDRY (Docteur ès-Sciences)
Etude de la rupture ductile et de la rupture par clivage d'aciers faiblement alliés.
(mars 1982) (Université de Technologie de Compiègne)
J.P. PEDRON (Docteur-Ingénieur)
Propagation des fissures dans l'alliage Inconel 718 à haute température sous diverses sollicitations.
Influence de la microstructure et de l'oxydation.
(novembre 1982) (E.N.S.M.P. Paris)
P. CLEMENT (Ingénieur)
Propagation par fatigue de petits défauts dans une fonte à graphite sphéroïdal.
(novembre 1984) (C.N.A.M.. Paris)
E. MAAS (Docteur-Ingénieur)
Propagation des fissures par fluage dans l'acier inoxydable austénitique Z3-CND17-l3.
(avril 1984) (E.N.S.M.P. Paris)
C. LEVAILLANT (Docteur ès-Sciences)
Approche métallographique de l'endommagement d'aciers inoxydables austénitiques sollicités en
fatigue plastique ou en fluage : description et interprétation physique des interactions fatigue - fluage oxydation (juin 1984) (Université de Technologie de Compiègne).
Mai 2012
40
B. MARINI (Docteur-Ingénieur)
Croissance des cavités en plasticité rupture sous chargements non radiaux et en mode mixte.
(octobre 1984) (E.N.S.M.P. Paris)
M. YOSHIDA (Doctorat 3ème cycle)
Endommagement intergranulaire de fluage dans un acier inoxydable 17Cr-12Ni : Etude quantitative du
rôle de la multiaxialité des contraintes.
(septembre 1985) (E.N.S.M.P. Paris)
M. ALMUNDHERI Doctorat 3ème cycle)
Rupture par clivage de l'acier 16MND6 à l'état non irradié et irradié.
(octobre 1983) (Orsay)
A. DIBOINE (Doctorat en Propriétés mécaniques des matériaux)
Etude de la propagation des fissures en fatigue - fluage oxydation à 650°C dans un superalliage base
nickel : l'Inconel 718.
(janvier 1985) (E.N.S.M.P. Paris)
E. AMAR (Docteur Ingénieur)
Application de l'approche locale de la rupture à l'étude de la transition ductile-fragile dans l'acier
16MND5.
(février 1986) (E.N.S.M.P. Paris)
Ph. BENSUSSAN (Docteur ès-Sciences)
Approches mécaniques globale et locale de l'amorçage et de la propagation de fissures par fluage dans
l'alliage léger aluminium-cuivre 2219.
(février 1986) (Orsay)
M. ALMUNDHERI (Docteur ès-Sciences)
Approches globale et locale de la rupture fragile et ductile d'aciers faiblement alliés (16MND5) Influence de l'irradiation.
(juin 1986)(ORSAY).
H. BURLET (Doctorat en Sciences et Génie des Matériaux)
Fatigue thermomécanique - Application aux outillages de coulée par centrifugation.
(octobre 1987) (E.N.S.M.P. Paris)
A. LEFRANÇOIS (Docteur-Ingénieur)
Propagation par fatigue de fissures bi et tridimensionnelles dans deux alliages d'aluminium. Effets de
petite fissure et de chargements aléatoires.
(décembre 1987) (E.N.S.M.P. Paris)
R. PIQUES (Doctorat en Sciences et Génie des Matériaux)
Mécanique et mécanismes de l'amorçage et de la propagation des fissures en viscoplasticité dans un
acier inoxydable austénitique.
(Février 1989) (E.N.S.M.P. Paris)
V. DOQUET (Doctorat en Sciences et Génie des Matériaux)
Comportement et endommagement de deux aciers à structure cubique centrée et cubique à faces
centrées en fatigue oligocyclique, sous chargement multiaxial non-proportionnel.
(juin 1989) (E.N.S.M.P. Paris)
A. GENTY (Doctorat en Sciences et Génie des Matériaux)
Etude expérimentale et numérique de l'amorçage et de l'arrêt de fissure, sous choc thermique, dans un
acier faiblement allié (16MND5) (décembre 1989) (E.N.S.M.P. Paris).
Mai 2012
41
J.C. EHRSTRÖM (Doctorat en Sciences et Génie des Matériaux)
Alliages Al-Fe-X élaborés par métallurgie des poudres : microstructure, comportement et
endommagement.
(février 1990) (E.N.S.M.P. Paris)
M. DI FANT (Doctorat en Sciences et Génie des Matériaux)
Mécanique et mécanismes de la rupture dynamique dans un acier peu allié.
(décembre 1990)((E.N.S.M.P. Paris)
E. MOLINIE (Doctorat en Sciences et Génie des Matériaux)
Mécanique et mécanismes de l'endommagement et de la fissuration en viscoplasticité dans les aciers
ferritiques faiblement alliés. Eléments d'estimation de la durée de vie résiduelle.
(mai 1991) (E.N.S.M.P. Paris).
S. JEUNEHOMME (Doctorat en Sciences et Génie des Matériaux)
Relations microstructure-propriétés mécaniques des aciers perlitiques : application aux rails traités
thermiquement.
(juin 1991) (E.N.S.M.P. Paris)
Y. LEJEAIL (Doctorat en Sciences et Génie des Matériaux)
Etude de l'interaction fatigue-fluage dans un acier 316L SPH à 600°C. Influence d'un temps de maintien
en tension par rapport à un temps de maintien en compression sur l'amorçage et la propagation des
fissures dans les éprouvettes-structures.
(juin 1991).
P. JOLY (Doctorat en Sciences et Génie des Matériaux)
Etude de la rupture d'aciers inoxydables austéno-ferritiques moulés, fragilisés par vieillissement à
400°C.
(mai 1992) (E.N.S.M.P. Paris).
J. WEISS (Doctorat en Sciences et Génie des Matériaux).
Endommagement en viscoplasticité cyclique sous chargement multiaxial à haute température d'un acier
inoxydable austénitique.
(septembre 1992) (E.N.S.M.P. Paris).
E. KANTIDIS (Doctorat en Sciences et Génie des Matériaux).
Rupture fragile intergranulaire d'un acier faiblement allié. Approches globale et locale.
(juin 1993) (E.N.S.M.P. Paris).
G. HOCHSTETTER (Doctorat en Sciences et Génie des Matériaux).
Propagation des fissures à haute température dans un superalliage pour disques de turbomachine
(Alliage N18). Interactions entre la nature des sollicitations mécaniques et des effets d'oxydation.
(janvier 1994) (E.N.S.M.P. Paris).
Th. IUNG (Doctorat en Sciences et Génie des Matériaux).
Propagation rapide et arrêt des fissures dans les aciers pour gazoducs. Rupture par clivage et rupture
ductile.
(juin 1994) (E.N.S.M.P. Paris)
Ph. ACHON (Doctorat en Sciences et Génie des Matériaux).
Comportement et ténacité d'alliages d'aluminium à haute résistance.
(octobre 1994) (E.N.S.M.P. Paris).
Mai 2012
42
D. TIGGES (Doctorat en Sciences et Génie des Matériaux)
Nocivité des défauts sous revêtement des cuves de réacteurs à eau sous pression.
(mars 1995), (E.N.S.M.P., Paris).
Ch. MOKHDANI (Doctorat en Sciences et Génie des Matériaux),
Amorçage et propagation des fissures de fatigue dans un acier pour tubes de transport de gaz.
(avril 1995), (E.N.S.M.P., Paris).
D. ARGENCE (Doctorat en Sciences et Génie des Matériaux)
Endommagements couplés de fatigue et de fluage sous chargement multiaxial appliqué à un acier
inoxydable austénitique.
(juin 1996) (E.N.S.M.P., Paris).
L. BAUVINEAU (Doctorat en Sciences et Génie des Matériaux)
Approche locale de la rupture ductile : Application à un acier Carbone-Manganèse.
(décembre 1996) (E.N.S.M.P., Paris).
Th. CLAD (Doctorat en Sciences et Génie des Matériaux)
Microstructures and fatigue crack growth in the inertie friction weld of N18 alloy.
(décembre 1996) (E.N.S.M.P., Paris).
B. GAILLY (Doctorat en Sciences et Génie des Matériaux)
Etude du comportement dynamique et de la rupture de 3 aciers à blindage.
(décembre 1996) (E.N.S.M.P., Paris).
J.C. CHASSAIGNE (Doctorat en Sciences et Génie des Matériaux)
Fissuration à hautes températures du superalliage base nickel N18 élaboré par métallurgie des poudres,
étude du couplage mécanique - environnement en pointe de fissure.
(avril 97) (E.N.S.M.P., Paris).
S. RENEVEY (Doctorat en Sciences et Génie des Matériaux)
Approches globale et locale de la rutpure dans le domaine de transition fragile-ductile d'un acier
faiblement allié. (septembre 97) (Université Paris-Sud XI).
Ould YAHYA (Doctorat en Sciences et Génie des Matériaux)
Approche locale de la rupture fragile intergranulaire de l'acier 16MND5.
(octobre 97) (E.N.S.M.P., Paris).
Dominique POQUILLON (Doctorat en Sciences et Génie des Matériaux)
Approche locale : fissuration à haute température dans un acier inoxydable austénitique sous
chargements thermomécaniques. Simulations numériques et validations expérimentales.
(décembre 97) (E.N.S.M.P., Paris).
Lydia DEVILLERS-GUERVILLE (Doctorat en Sciences et Génie des Matériaux)
Ruptures d'aciers inoxydables austéno-ferritiques moulés, fragilisés à 350-400°C : aspects
microstructuraux - Simulation numérique de la dispersion et des effets d'échelle.
(mars 98) (E.N.S.M.P., Paris).
François RIVALIN (Doctorat en Sciences et Génie des Matériaux)
Développement d'aciers pour gazoducs à haute limite d'élasticité et ténacité élevée : mécanique et
mécanismes de la rupture ductile à grande vitesse.
(mars 98) (E.N.S.M.P., Paris).
Mai 2012
43
Edith MARQUES VIEIRA (Doctorat en Sciences et Génie des Matériaux)
Mécanique non linéaire et aproche locale de la rupture - Application à l'acier inoxydable austénitique
Z2CN18-10 sous chargements complexes.
(juin 98) (Université Paris VI).
Magali CHABAUD-REYTIER (Doctorat en Sciences et Génie des Matériaux)
Etude de la fissuration différée par relaxation d'un acier inoxydable austénitique stabilisé au titane.
(juin 99) (E.N.S.M.P.)
Claire NAUDIN (Doctorat en Sciences et Génie des Matériaux)
Modélisation de la ténacité de l'acier de cuve REP en présence de zones de ségrégation.
(juin 99) (E.N.S.M.P.)
Emmanuel BOUYNE (Doctorat en Sciences et Génie des Matériaux)
Propagation et arrêt de fissures de clivage dans l'acier 21/4 Cr - 1 Mo.
(octobre 99) (E.N.S.M.P.)
Sébastien CARASSOU (Doctorat en Sciences et Génie des Matériaux)
Déclenchement du clivage dans un acier fortement allié : rôle de l’endommagement ductile localisé
autour des inclusions » (octobre 99) (E.N.S.M.P.).
Frédéric SANSOZ (Doctorat en Sciences et Génie des Matériaux)
Propagation des petites fissures de fatigue dans les zones de concentration de contraintes dans le
superalliage N18.
(février 2000) (E.N.S.M.P.)
Amine BENZERGA (Doctorat en Sciences et Génie des Matériaux)
Rupture ductile de tôles anisotropes. Simulation de la propagation longitudinale dans un tube pressurisé.
(mars 2000) (E.N.S.M.P.)
S. BUGAT (Doctorat en Sciences et Génie des Matériaux).
Comportement et endommagement des aciers austéno-ferritiques vieillis : une approche
micromécanique.
(décembre 2000) (E.N.S.M.P. Paris).
S. FRECHINET (Doctorat en Sciences et Génie des Matériaux).
Transformations et comportements du Zircaloy 4 en conditions iso-et anisothermes.
(janvier 2001) (E.N.S.M.P. Paris).
R. PARISOT (Doctorat en Sciences et Génie des Matériaux).
Microstructure, déformation et endommagement d'un revêtement de zinc sur tôle d'acier.
(avril 2001) (E.N.S.M.P. Paris).
A. LAMBERT-PERLADE (Doctorat en Sciences et Génie des Matériaux).
Rupture par clivage de microstructures d’aciers bainitiques obtenues en conditions de soudage.
(mai 2001) (E.N.S.M.P. Paris).
S. PONNELLE (Doctorat en Sciences et Génie des Matériaux).
Propagation des fissures par fatigue à haute température dans l'Inconel 718 : Effets de microstructure
et de chargements complexes.
(mai 2001) (E.N.S.M.P. Paris).
B. TANGUY (Doctorat en Sciences et Génie des Matériaux).
Modélisation de l’essai Charpy à l’aide de l’approche locale de la rupture. Application à l’acier 16
MND 5 dans le domaine de transition. (juillet 2001) (E.N.S.M.P. Paris).
Mai 2012
44
V. CALONNE (Doctorat en Sciences et Génie des Matériaux).
Propagation de fissure par fatigue dans les aciers austéno-ferritiques moulés : influence de la
microstructure, du vieillissement et de la température d’essai.
(juillet 2001) (E.N.S.M.P. Paris).
Q. AUZOUX (Doctorat en Sciences et Génie des Matériaux).
Fissuration en relaxation des aciers inoxydables austénitiques – Influence de l'écrouissage sur
l'endommagement intergranulaire. (Janvier 2004) (ENSMP Paris).
F. ALEXANDRE (Doctorat en Sciences et Génie des Matériaux).
Aspects probabilistes et microstructuraux de l'amorçage des fissures de fatigue dans l'alliage INCO 718.
(Mars 2004) (ENSMP Paris).
D. KADDOUR (Doctorat en Sciences et Génie des Matériaux).
Fluage isotherme et anisotherme dans les domaines monophasés ( α et β ) et biphasé ( α + β ) d'un
alliage Zr – 1% Nb – O. (Décembre 2004) (ENSMP Paris).
M. RADU (Doctorat en Sciences et Génie des Matériaux).
Relations entre la microstructure et le comportement mécanique des aciers TRIP pour application
automobile (Juillet 2005) (ENSMP Paris).
T.T. LUU (Doctorat en Sciences et Génie des Matériaux).
Déchirure ductile des aciers à haute résistance pour gazoducs (X 100) (Décembre 2006).
A.S. BILAT (Doctorat en Sciences et Génie des Matériaux).
Estimation du risque de rupture fragile de soudures de pipelines en aciers à haut grade : caractérisation
et modélisation (Juin 2007) (ENSMP Paris).
B. FOURNIER (Doctorat en Sciences et Génie des Matériaux).
Fatigue-fluage des aciers martensitiques à 9-12 % Cr : comportement et endommagement (Septembre
2007).
A. DALLOZ (Doctorat en Sciences et Génie des Matériaux).
Etude de l’endommagement par la découpe des aciers dual phase pour application automobile (2007).
R. SALAPETE (Doctorat en Sciences et Génie des Matériaux).
Propagation des fissures de fatigue dans les culasses automobile-Expériences et modélisation (2007).
S. NANGA NYONGHA (Doctorat en Sciences et Génie des Matériaux).
Comportement et transformations martensitiques de deux aciers inoxydables austénitiques : Effets de la
température, de la vitesse et du chargement (2008).
****************************
Mai 2012
45