projets de normes diffuses

Transcription

Le NBN se charge de vous procurer toutes
publications Internationales moyennant
remboursement de ses frais.
Veuillez bien préciser lors de votre commande la
version linguistique désirée, d’avance merci.
Nous vous rappelons que tout document peut aussi être
consulté en notre bibliothèque, les jours ouvrables de 9:00
à 16:00, le vendredi de 9:00 à 13:00.
Het NBN bezorgt U alle internationale publicaties, mits
terugbetaling van de kosten.
Gelieve bij uw bestelling de gewenste taalkundige
versie te preciseren, dank U bij voorbaat.
Elk document kan ook geraadpleegd worden in onze
bibliotheek, op werkdagen van 9:00 tot 16:00, op vrijdag
van 9:00 tot 13:00.
PROJETS DE NORMES DIFFUSES
er
Période du 1 janvier 2014 au 31 janvier 2014.
*Actuellement disponible en anglais seulement.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
Nouvelles publications
Nieuwe publicaties
Les documents ISO existent en anglais et en français
De ISO-documenten bestaan in het Engels en in het
Frans.
PC 253
Treated wastewater re-use for
irrigation
ISO/DIS
16075-1
*Guidelines for Treated Wastewater Use
for Irrigation Projects — Part 1: The
Basis of a Reuse Project for Irrigation
(Revision of ISO/CD 16075-2)
ISO/DIS
16075-2
for Irrigation Projects — Part 2:
Development of the project
ISO/DIS
16075-3
for Irrigation Projects — Part 3:
Components of a reuse project for
irrigation
PC 271
Compliance management systems
ISO/DIS
19600
*Compliance management systems —
Guidelines
REMCO
Committee on reference materials
ISO/DGuide
33
*Reference materials — Good practice in
using reference materials
(Revision of ISO Guide 32:1997, ISO
Guide 33:2000)
TC 4
Rolling bearings
ISO/DIS 3245 *Rolling bearings — Needle roller
bearings, drawn cup without inner ring —
Geometrical product specifications
(GPS), boundary dimensions and
tolerances
(Revision of ISO 3245:2007)
TC 6
Paper, board and pulps
ISO/DIS
16260
*Paper and board - Determination of
internal bond strength
TC 8
Ships and marine technology
ISO/DIS
18611-1
*Ships and marine technology — Marine
NOx reduction agent AUS 40 — Part 1:
Quality requirements
ISO/DIS
18611-2
ISO NORMEN / NORMES ISO
1
(Revision of ISO 2725-3:2001)
Test methods
TC 34
Food products
ISO/DIS
27971
*Cereals and cereal products —
Common wheat (Triticum aestivum L.) —
Determination of alveograph properties
of dough at constant hydration from
commercial or test flours and test milling
methodology
ISO/DIS
17604
*Microbiology of food and animal feed —
Carcass sampling for microbiological
analysis
(Revision of ISO 17604:2003, ISO
17604:2003/Amd 1:2009)
ISO/DIS
12966-4
*Animal and vegetable fats and oils —
Determination of methyl esters of fatty
acids — Part 4: Capillary gas
chromatographic method
15304:2002)
Aircraft and space vehicles
TC 38
Textiles
ISO/DIS
16130
*Aerospace series — Dynamic testing of
the locking behaviour of bolted
connections under transverse loading
conditions (vibration test)
ISO/DIS
17299-4
*Textiles — Determination of deodorant
property — Part 4: Condensation
sampling analysis
TC 23
Tractors and machinery for
agriculture and forestry
ISO/DIS
24253-1
*Crop protection equipment — Spray
deposit test for field crop — Part 1:
Measurement in a horizontal plane
ISO/DIS
24253-2
*Crop protection equipment — Spray
deposit test for field crop — Part 2:
Measurement in a crop
TC 28
Petroleum products and lubricants
ISO/DIS
20844
*Petroleum and related products Determination of the shear stability of
polymer-containing oils using a diesel
injector nozzle
ISO/DIS
18611-3
Handling, transportation and storage
ISO/DIS
15016
*Ships and marine technology —
Guidelines for the assessment of speed
and power performance by analysis of
speed trial data
TC 17
Steel
ISO/DIS
11949
*Cold-reduced electrolytic tinplate
ISO/DIS
11950
*Cold-reduced electrolytic
chromium/chromium oxide-coated steel
ISO/DIS
11951
*Cold-reduced blackplate in coil form for
the production of tinplate or electrolytic
chromium/chromium oxide-coated steel
TC 20
TC 29
Small tools
ISO/DIS
2725-1
*Assembly tools for screws and nuts —
Square drive sockets — Part 1: Handoperated sockets
ISO/DIS
2725-2
Square drive sockets — Part 2: Machineoperated sockets ("impact")
ISO/DIS
2725-3
Square drive sockets — Part 3: Machineoperated sockets ("non-impact")
ISO/DIS 3074 *Wool — Determination of
dichloromethane-soluble matter in
combed sliver
ISO/DIS
18068
*Cotton fibers — Test method for sugar
content — Spectrophotometry
ISO/DIS
12947-2
*Textiles — Determination of the
abrasion resistance of fabrics by the
Martindale method — Part 2:
Determination of specimen breakdown
(Revision of ISO 12947-2:1998, ISO
12947-2:1998/Cor 1:2002)
TC 39
Machine tools
ISO/DIS 2307
*Machine tools — Test code for machine
tools — Part 7: Geometric accuracy of
axes of rotation
ISO/DIS
13041-5
*Test conditions for numerically
controlled turning machines and turning
centres — Part 5: Accuracy of feeds,
speeds and interpolations
ISO/DIS
18217
*Safety of woodworking machines —
Edge-banding machines fed chain(s)
ISO/DIS
16089
*Machine tools — Safety — Stationary
grinding machines
ISO/DIS
*Machine tools — Safety — Sawing
2
16093
machines for cold metal
TC 43
Acoustics
ISO/DIS
1996-1
ISO/DIS
16254
ISO/DIS
11357-7
*Acoustics — Description, measurement
and assessment of environmental noise
— Part 1: Basic quantities and
assessment procedures
*Plastics — Differential scanning
calorimetry (DSC) — Part 7:
Determination of crystallization kinetics
ISO/DIS
4892-1
*Plastics — Methods of exposure to
laboratory light sources — Part 1:
General guidance
*Acoustics — Measurement of minimum
noise emitted by road vehicles
TC 68
Financial services
ISO 17497*Acoustics — Sound-scattering
1:2004/DAmd properties of surfaces — Part 1:
1
Measurement of the random-incidence
scattering coefficient in a reverberation
room — Amendment 1
ISO 9564*Financial services — Personal
1:2011/DAmd Identification Number (PIN) management
1
and security — Part 1: Basic principles
and requirements for PINs in card-based
systems — Amendment 1
TC 44
Welding and allied processes
TC 69
Applications of statistical methods
ISO/DIS
3834-5
*Quality requirements for fusion welding
of metallic materials — Part 5:
Documents with which it is necessary to
conform to claim conformity to the quality
requirements of ISO 3834-2, ISO 3834-3
or ISO 3834-4
(Revision of ISO 3834-5:2005, ISO 38345:2005/Cor 1:2007)
ISO/DIS
7870-6
*Statistical Methods in Process
Management — Control Charts — Part
6: EWMA Control Charts
TC 70
Internal combustion engines
ISO/DIS
8178-5
*Reciprocating internal combustion
engines — Exhaust emission
measurement — Part 5: Test fuels
TC 85
Nuclear energy, nuclear technologies,
and radiological protection
ISO/DIS
16637
Radiological protection — Monitoring and
internal dosimetry for staff exposed to
medical radionuclides as unsealed
sources
TC 86
Refrigeration and air-conditioning
ISO/DIS
23953-1
*Refrigerated display cabinets — Part 1:
Vocabulary
23953-1:2005/Amd 1:2012)
TC 91
Surface active agents
ISO/DIS
17280
*Surface active agents — Determination
of 1,4-dioxan residues in surfactants
obtained from epoxyethane by gas
chromatography
ISO/DIS
15614-8
ISO/DIS
9454-1
*Specification and qualification of
welding procedures for metallic materials
— Welding procedure test — Part 8:
Welding of tubes to tube-plate joints
*Soft soldering fluxes — Classification
and requirements — Part 1:
Classification, labelling and packaging
TC 45
Rubber and rubber products
ISO/DIS
18766
*Rubber, vulcanized or thermoplastic —
Low temperature testing — General
introduction and guide
ISO/DIS
19242
*Rubber — Determination of total sulfur
content by ion chromatography
TC 58
Gas cylinders
ISO/DIS
16964
*Gas cylinders — Flexible hoses
assemblies — Specification and testing
TC 92
Fire safety
ISO/DIS
17871
*Gas cylinders — Quick opening valves
— Specification and type testing
ISO/DIS
9705-1
TC 59
Buildings and civil engineering works
ISO/DIS
12006-2
*Building construction — Organization of
information about construction works —
Part 2: Framework for classification
*Reaction to fire tests — Room corner
test for wall and ceiling lining products —
Part 1: Test method for a small room
configuration
9705:1993/Cor 1:1993)
TC 94
Personal safety -- Protective clothing
and equipment
ISO/DIS
*PPE for firefighters — Test methods
TC 61
Plastics
3
11999-5
ISO/DIS
11999-6
and requirements for PPE used by
firefighters who are at risk of exposure to
high levels of heat and/or flame while
fighting fires occurring in structures —
Part 5: Helmets
Part 6: Footwear
TC 96
Cranes
ISO/DIS
16715.2
*Cranes — Hand signals used with
cranes
TC 106
Dentistry
ISO/DIS
22674
*Dentistry — Metallic materials for fixed
and removable restorations and
appliances
*Dentistry — Digitizing devices for
ISO
12836:2012/D CAD/CAM systems for indirect dental
Amd 1
restorations — Test methods for
assessing accuracy — Amendment 1
TC 107
Metallic and other inorganic coatings
ISO/DIS
27307
*Evaluation of adhesion/cohesion of
plasma sprayed ceramic coatings by
scratch testing
TC 108
Mechanical vibration, shock and
condition monitoring
ISO/DIS
7626-2
*Mechanical vibration and shock —
Experimental determination of
mechanical mobility — Part 2:
Measurements using single-point
translation excitation with an attached
vibration exciter
ISO/DIS
13379-2
Industrial trucks
ISO/DIS
11525-2
*Rough-terrain trucks - User
requirements — Part 2: Slewing variablereach trucks
TC 121
Anaesthetic and respiratory
equipment
ISO/DIS
23747
*Anaesthetic and respiratory equipment
— Peak expiratory flow meters for the
assessment of pulmonary function in
spontaneously breathing humans
Graphic technology
ISO/DIS
12646
*Graphic technology — Displays for
colour proofing — Characteristics
12646:2008/Amd 1:2010)
TC 134
Fertilizers and soil conditioners
ISO/DIS
17322
*Fertilizers and soil conditioners — Sulfur
Coated Urea (SCU) — Analytical
methods
ISO/DIS
17323
*Fertilizers and soil conditioners — Sulfur
Coated Urea (SCU) — General
requirements
TC 146
Air quality
ISO/DIS
17621
*Workplace atmospheres — Short term
detector tube measurement systems —
Requirements and test methods
ISO/DIS
16000-20
*Indoor air — Detection and enumeration
of moulds — Part 20: Determination of
total spore count
TC 147
Water quality
ISO/DIS 9697 *Water quality — Measurement of gross
beta activity in non-saline water — Thick
source method
TC 150
Implants for surgery
ISO/DIS 8828 *Implants for surgery — Guidance on
care and handling of orthopaedic
implants
*Condition monitoring and diagnostics of
machines — Data interpretation and
diagnostics techniques — Part 2: Datadriven applications
TC 110
TC 130
TC 153
Valves
ISO/DIS
15848-1
*Industrial valves — Measurement, test
and qualification procedures for fugitive
emissions — Part 1: Classification
system and qualification procedures for
type testing of valves
ISO/DIS
15848-2
*Industrial valves — Measurement, test
and qualification procedures for fugitive
emissions — Part 2: Production
acceptance test of valves
TC 160
Glass in building
ISO/DIS
1288-1
*Glass in building — Determination of the
bending strength of glass — Part 1:
Fundamentals of testing glass
(Revision of ISO/DIS 1288-1)
ISO/DIS
1288-2
Coaxial double-ring test on flat
4
specimens with large test surface areas
ISO/DIS
16840-6
ISO/DIS
1288-3
bending strength of glass — Part 3: Test
with specimen supported at two points
(four-point bending)
*Wheelchair seating — Part 6: Simulated
use and determination of the changes in
properties — Seat cushions
ISO/DIS
16840-10
*Wheelchair — Resistance to ignition of
non-integrated seat and back support
cushions — Part 10: Requirements and
test methods
ISO/DIS
1288-4
Testing of channel-shaped glass
TC 183
Copper, lead, zinc and nickel ores and
concentrates
ISO/DIS
13547-1
*Copper, lead, zinc and nickel sulfide
concentrates — Determination of arsenic
— Part 1: Iron hydroxide concentration
and inductively coupled plasma atomic
emission spectrometric method
ISO/DIS
13547-2
*Copper, lead, zinc and nickel sulfide
concentrates — Determination of arsenic
— Part 2: Acid digestion and inductivelycoupled plasma atomic emission
spectrometric method
ISO/DIS
1288-5
Coaxial double-ring test on flat
specimens with small test surface areas
TC 163
Thermal performance and energy use
in the built environment
ISO/DIS
16956
*Thermal Performance in the Built
Environment — Determination of Air
Flow Rate in Building Applications by
Field Measuring Methods
TC 195
Building construction machinery and
equipment
TC 172
Optics and photonics
ISO/DIS
13105-1
*Building construction machinery and
equipment — Machinery for
ISO
*Ophthalmic optics — Spectacle frames
8624:2011/DA — Measuring system and terminology —
md 1
Amendment 1
ISO/DIS
10322-1
ISO/DIS
10322-2
ISO/DIS
13694
concrete surface floating and finishing —
Part 1: Terms and commercial
specifications
*Ophthalmic optics — Semi-finished
spectacle lens blanks — Part 1:
Specifications for single-vision and
multifocal lens blanks
ISO/DIS
13105-2
equipment — Machinery for
concrete surface floating and finishing —
Part 2: Safety requirements
and verification
*Ophthalmic optics - Semi-finished
spectacle lens blanks — Part 2:
Specifications for progressive-power and
degressive-power lens blanks
*Optics and optical instruments —
Lasers and laser-related equipment —
Test methods for laser beam power
(energy) density distribution
13694:2000/Cor 1:2005)
TC 199
Safety of machinery
ISO/DIS
14122-4
*Safety of machinery — Permanent
means of access to machinery — Part 4:
Fixed ladders
14122-4:2004/Amd 1:2010)
TC 204
Intelligent transport systems
ISO/DIS
13185-2
*Intelligent transport systems — Vehicle
interface for provisioning and support of
ITS services — Part 2: Unified gateway
protocol (UGP) requirements and
specification for vehicle ITS station
gateway (V-ITS-SG) interface
ISO/DIS
17901-1
*Optics and photonics — Holography —
Part 1: Methods of measuring diffraction
efficiency and associated optical
characteristics of holograms
ISO/DIS
17901-2
*Optics and photonics — Holography —
Part 2: Methods for measurement of
hologram recording characteristics
TC 210
Quality management and
corresponding general aspects for
medical devices
TC 173
Assistive products for persons with
disability
IEC/DIS
80369-5
Small-bore connectors for liquids and
gases in healthcare applications — Part
5: Connectors for limb cuff inflation
5
applications
ISO/IEC
147632:2012/DAmd
1
*Information technology —
Implementation and operation of
customer premises cabling — Part 2:
Planning and installation — Amendment
1
ISO/IEC DIS
27018
*Information technology — Security
techniques — Code of practice for PII
protection in public cloud acting as PII
processors
ISO/IEC DIS
27040
techniques — Storage security
ISO/IEC DIS
27041
techniques — Guidance on assuring
suitability and adequacy of incident
investigative methods
TC 215
Health informatics
ISO/DIS
16278
*Health informatics — Categorial
structure for terminologies systems of
human anatomy
ISO/DIS
17090-2
*Health informatics — Public key
infrastructure — Part 2: Certificate profile
TC 220
Cryogenic vessels
ISO/DIS
21029-2.2
*Cryogenic vessels — Transportable
vacuum insulated vessels of not more
than 1 000 litres volume — Part 2:
Operational requirements
TC 226
Materials for the production of
primary aluminium
ISO/IEC DIS
27042
ISO/DIS
18842
*Aluminium oxide primarily used for the
production of aluminium — Method for
the determination of tapped and
untapped density
techniques — Guidelines for the analysis
and interpretation of digital evidence
ISO/IEC DIS
27043
techniques — Incident investigation
principles and processes
ISO/DIS
18843
*Aluminium oxide primarily used for the
production of aluminium — Method for
the determination of flow time
TC 242
Energy Management
ISO/IEC
1449612:2012/DAm
d3
*Information technology — Coding of
audio-visual objects — Part 12: ISO base
media file format — Amendment 3: Font
streams and other improvements to file
format
ISO/DIS
50004
*Energy management systems —
Guidance for the implementation,
maintenance and improvement of an
energy management system
ISO/IEC
1544412:2012/DAm
d3
ISO/DIS
50006
Measuring energy performance using
energy baselines (EnB) and energy
performance indicators (EnPI) —
General principles and guidance
*Information technology — JPEG 2000
image coding system — Part 12: ISO
base media file format — Amendment 3:
Font streams and other improvements to
file format
ISO/IEC DIS
23001-7
IULTCS
International Union of Leather
Technologists and Chemists Societies
*Information technology — MPEG
systems technologies — Part 7:
Common encryption in ISO base media
file format files
(Revision of ISO/IEC 23001-7:2012)
ISO/DIS
19076
*Leather — Measurement of leather
surface — Using electronic techniques
ISO/IEC
230024/DAmd 2
JTC 1
Information technology
*Information technology — MPEG video
technologies — Part 4: Video tool library
— Amendment 2: FU and FN
descriptions for HEVC
ISO/IEC DIS
17811-2
*Information Technology — Device
Control and Management — Part 2:
Specification of Device Control and
Management Protocol
ISO/IEC
230025:2013/DAmd
1
ISO/IEC DIS
17811-3
*Information Technology — Device
Control and Management — Part 3:
Specification of Reliable Message
Delivery Protocol
*Information technology — MPEG video
technologies — Part 5: Reconfigurable
media coding conformance and
reference software — Amendment 1:
Graphics tool library (GTL) reference
software and conformance
ISO/IEC DIS
17821
*Information Technology — Specification
of Low Power Wireless Mesh Network
over Channel-hopped TDMA Links
ISO/IEC
230073:2011/DAmd
1
*Information technology — Rich media
user interfaces — Part 3: Conformance
and reference software — Amendment 1:
Conformance and reference software for
widget extension and AUI
ISO/IEC
*Information technology — High
6
230081/DAmd 1
efficiency coding and media delivery in
heterogeneous environments — Part 1:
MPEG media transport (MMT) —
Amendment 1: Additional technologies
for MPEG Media Transport (MMT)
ISO/FDIS
12625-7
*Tissue paper and tissue products — Part
7: Determination of optical properties —
Measurement of brightness and colour
with D65/10° (outdoor daylight)
ISO/IEC DIS
18000-4
*Information technology — Radio
frequency identification for item
management — Part 4: Parameters for
air interface communications at 2,45
GHz
ISO/FDIS
13820
*Paper, board and corrugated fibreboard
— Description and calibration of
compression-testing equipment
TC 17
Steel
*Information technology — Keyboard
layouts for office systems — Part 11:
Functionality of dead keys and
repertoires of characters entered by
dead keys
ISO/FDIS
15510
*Stainless steels — Chemical composition
ISO/FDIS
16143-1
*Stainless steels for general purposes —
Part 1: Corrosion-resistant flat products
ISO/FDIS
16143-2
Part 2: Corrosion-resistant semi-finished
products, bars, rods and sections
ISO/FDIS
16143-3
Part 3: Wire
ISO/IEC DIS
9995-11
ISO/IEC DIS
19788-4
*Information technology — Learning,
education and training — Metadata for
learning resources — Part 4: Technical
elements
ISO/IEC DIS
38500
*Information Technology — governance
of IT — For the Organization
(Revision of ISO/IEC 38500:2008)
ISO/FDIS 4998 *Continuous hot-dip zinc-coated carbon
steel sheet of structural quality
PROJETS FINALS
TC 20
ISO/FDIS
10788
*Space systems — Lunar simulants
ISO/FDIS
17255
Space systems — Programme
management — Statement of work
TC 21
Equipment for fire protection and fire
fighting
ISO/FDIS
6182-10
*Fire protection — Automatic sprinkler
systems — Part 10: Requirements and
test methods for domestic sprinklers
ISO/FDIS
7076-5
*Fire protection — Foam fire extinguishing
systems — Part 5: Compressed air foam
equipment
TC 22
Road vehicles
ISO/FDIS
8820-9
*Road vehicles — Fuse-links — Part 9:
Fuse-links with shortened tabs (Type K)
ISO/FDIS
18542-2
*Road vehicles — Standardized repair and
maintenance information (RMI)
terminology — Part 2: Standardized
process implementation requirements,
Registration Authority
ISO/FDIS
12405-3
*Electrically propelled road vehicles —
Test specification for Lithium-ion traction
er
TC 2
Fasteners
ISO/FDIS 4017 *Hexagon head screws — Product grades
A and B
ISO/FDIS
10683
*Fasteners — Non-electrolytically applied
zinc flake coatings
TC 4
Rolling bearings
ISO/FDIS 199 *Rolling bearings — Thrust bearings —
Geometrical product specification (GPS)
and tolerance values
ISO/FDIS 492 *Rolling bearings — Radial bearings —
Dimensional and geometrical tolerances
TC 6
ISO/FDIS 2759 *Board — Determination of bursting
strength
7
battery packs and systems — Part 3:
Safety performance requirements
11200
and equipment — Guidelines for the use
of basic standards for the determination of
emission sound pressure levels at a work
station and at other specified positions
11200:1995/Cor 1:1997)
ISO/FDIS
12999-1
*Acoustics — Determination and
application of measurement uncertainties
in building acoustics — Part 1: Sound
insulation
ISO/FDIS
16380
*Road Vehicles — Blended Fuels
Refuelling Connector
TC 24
Particle characterization including
sieving
ISO/FDIS
9276-2
*Representation of results of particle size
analysis — Part 2: Calculation of average
particle sizes/diameters and moments
from particle size distributions
TC 29
Small tools
TC 45
ISO/FDIS
16462
*Cubic boron nitride inserts, tipped or solid
— Dimensions, types
ISO/FDIS
16463
*Polycristalline diamond inserts, tipped —
Dimensions, types
ISO/FDIS 3994 *Plastics hoses — Helical-thermoplasticreinforced thermoplastics hoses for
suction and discharge of aqueous
materials — Specification
TC 33
Refractories
ISO/FDIS
16835
*Refractory products — Determination of
thermal expansion
TC 34
Food products
ISO/FDIS 6806 *Rubber hoses and hose assemblies for
use in oil burners — Specification
ISO/FDIS 8029 *Plastics hose — General-purpose
collapsible water hose, textile-reinforced
— Specification
ISO/FDIS 3493 *Vanilla — Vocabulary
ISO
*Sensory analysis — General guidance for
8589:2007/FDA the design of test rooms — Amendment 1
md 1
TC 35
Paints and varnishes
ISO/FDIS
3233-2
*Paints and varnishes — Determination of
the percentage volume of non-volatile
matter — Part 2: Method using the
determination of non-volatile-matter
content in accordance with ISO 3251 and
determination of dry film density on coated
test panels by the Archimedes principle
TC 46
Information and documentation
ISO/FDIS
28560-1
*Information and documentation — RFID
in libraries — Part 1: Data elements and
general guidelines for implementation
ISO/FDIS
28560-2
in libraries — Part 2: Encoding of RFID
data elements based on rules from
ISO/IEC 15962
ISO/FDIS
28560-3
in libraries — Part 3: Fixed length
encoding
TC 38
Textiles
ISO/FDIS
16373-3
*Textiles — Dyestuffs — Part 3: Method
for determination of certain carcinogenic
dyestuffs (method using
triethylamine/methanol)
TC 54
Essential oils
ISO/FDIS
16928
*Essential oil of ginger [Zingiber officinale
Roscoe]
ISO/FDIS
15625
*Protein fibres — Electronic test method
for defects and evenness of raw silk
TC 60
Gears
TC 43
Acoustics
ISO/FDIS
14104
*Gears — Surface temper etch inspection
after grinding, chemical method
ISO/FDIS
10844
*Acoustics — Specification of test tracks
for measuring noise emitted by road
vehicles and their tyres
TC 61
Plastics
ISO/FDIS
*Acoustics — Noise emitted by machinery
ISO 10350*Plastics — Acquisition and presentation
1:2007/FDAmd of comparable single-point data — Part 1:
1
Moulding materials — Amendment 1
8
ISO/FDIS
15985
*Plastics — Determination of the ultimate
anaerobic biodegradation under highsolids anaerobic-digestion conditions —
Method by analysis of released biogas
15985:2004/Cor 1:2007)
ISO/FDIS
18436-2
machines — Requirements for
qualification and assessment of personnel
— Part 2: Vibration condition monitoring
and diagnostics
ISO/FDIS
17223
*Plastics — Determination of yellowness
index and change in yellowness index
TC 121
Anaesthetic and respiratory equipment
ISO/FDIS
16365-1
*Plastics — Thermoplastic polyurethanes
for moulding and extrusion — Part 1:
Designation system and basis for
specifications
ISO/FDIS
80601-2-67
*Medical electrical equipment — Part 267: Particular requirements for basic
safety and essential performance of
oxygen-conserving equipment
ISO/FDIS
16365-2
Preparation of test specimens and
determination of properties
TC 135
Non-destructive testing
ISO/FDIS
12715
ISO/FDIS
16365-3
Distinction between ether and ester
polyurethanes by determination of the
ester group content
*Non-destructive testing — Ultrasonic
testing — Reference blocks and test
procedures for the characterization of
contact probe sound beams
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
TC 71
Concrete, reinforced concrete and prestressed concrete
ISO/FDIS
13315-2
*Environmental management for concrete
and concrete structures — Part 2: System
boundary and inventory data
TC 86
ISO/FDIS
16345
*Water-cooling towers — Testing and
rating of thermal performance
and equipment
ISO/FDIS
20346
*Personal protective equipment —
Protective footwear
20346:2004/Cor 1:2005, ISO
20346:2004/Amd 1:2007, ISO
20346:2004/Cor 2:2006)
ISO 16486*Plastics piping systems for the supply of
1:2012/FDAmd gaseous fuels - Unplasticized polyamide
1
(PA-U) piping systems with fusion jointing
and mechanical jointing — Part 1: General
— Amendment 1
1
and mechanical jointing — Part 2: Pipes
— Amendment 1
ISO/FDIS 817.2 *Refrigerants — Designation and safety
classification
TC 94
ISO
*Plastics piping systems — Polyethylene
8779:2010/FDA (PE) pipes for irrigation — Specifications
md 1
— Amendment 1
1
and mechanical jointing — Part 3: Fittings
— Amendment 1
TC 96
Cranes
ISO/FDIS
17440
*Cranes — General design — Limit states
and proof of competence of forged steel
hooks
TC 106
Dentistry
ISO/FDIS
9173-3
*Dentistry — Extraction forceps — Part 3:
Design
TC 108
ISO/FDIS 8513 *Plastics piping systems — Glassreinforced thermosetting plastics (GRP)
pipes — Test methods for the
determination of the apparent initial
longitudinal tensile strength
TC 146
ISO/FDIS 8672 *Air quality — Determination of the
number concentration of airborne
inorganic fibres by phase contrast optical
microscopy — Membrane filter method
ISO/FDIS
9
Air quality
*Interior air of road vehicles — Part 5:
Screening method for the determination of
7176-1
static stability
TC 180
Solar energy
ISO/FDIS
22975-3
*Solar energy — Collector components
and materials — Part 3: Absorber surface
durability
TC 190
Soil quality
*Implants for surgery — Active implantable
medical devices — Part 1: General
requirements for safety, marking and for
information to be provided by the
manufacturer
ISO/FDIS
17184
*Soil quality — Determination of carbon
and nitrogen by near-infrared
spectrometry (NIRS)
TC 201
Surface chemical analysis
ISO/FDIS
11952
Surface chemical analysis — Scanningprobe microscopy — Determination of
geometric quantities using SPM:
Calibration of measuring systems
TC 204
ISO/FDIS
11270
*Intelligent transport systems — Lane
keeping assistance systems (LKAS) —
Performance requirements and test
procedures
TC 205
Building environment design
ISO/FDIS
13612-1
*Heating and cooling systems in buildings
— Method for calculation of the system
performance and system design for heat
pump systems — Part 1: Design and
dimensioning
ISO/FDIS
13612-2
*Heating and cooling systems in buildings
pump systems — Part 2: Energy
calculation
TC 206
Fine ceramics
ISO/FDIS
17094
Fine ceramics (advanced ceramics,
advanced technical ceramics) — Test
method for antibacterial activity of
semiconducting photocatalytic materials
under indoor lighting environment
12219-5
the emissions of volatile organic
compounds from vehicle interior parts and
materials — Static chamber method
ISO/FDIS
16000-31
*Indoor air — Part 31: Measurement of
flame retardants and plasticizers based on
organophosphorus compounds —
Phosphoric acid ester
TC 150
ISO/FDIS
14708-1
TC 161
Control and protective devices for gas
and/or oil burners and appliances
ISO/FDIS
23551-5
*Safety and control devices for gas
burners and gas-burning appliances —
Particular requirements — Part 5: Manual
gas valves
ISO/FDIS
23553-1
*Safety and control devices for oil burners
and oil-burning appliances — Particular
requirements — Part 1: Automatic and
semi-automatic valves
23553-1:2007/Cor 1:2009)
TC 164
Mechanical testing of metals
ISO/FDIS
17340
*Metallic materials — Ductility testing —
High speed compression test for porous
and cellular metals
TC 165
Timber structures
ISO/FDIS
13910
*Timber structures — Strength graded
timber — Test methods for structural
properties
ISO/FDIS
17754
Timber structures — Test methods —
Torsional resistance of driving in screws
TC 172
ISO/FDIS
10109
*Optics and photonics — Guidance for the
selection of environmental tests
10109-11:2001, ISO 10109-12:2004, ISO
10109-1:2005, ISO 10109-6:2005, ISO
10109-8:2005)
TC 220
Cryogenic vessels
ISO/FDIS
21010
*Cryogenic vessels — Gas/materials
compatibility
JTC 1
ISO/FDIS
10343
*Ophthalmic instruments —
Ophthalmometers
TC 173
disability
ISO/IEC 14443- *Identification cards — Contactless
3:2011/FDAmd integrated circuit cards — Proximity cards
6
— Part 3: Initialization and anticollision —
Amendment 6: Bit rates of 3fc/4, fc, 3fc/2
and 2fc from PCD to PICC
ISO/FDIS
*Wheelchairs — Part 1: Determination of
ISO/IEC FDIS *Information technology — MPEG
23001-9
systems technologies — Part 9: Common
10
encryption of MPEG-2 transport streams
practice
ISO/IEC FDIS *Information technology — High efficiency
23008-1
coding and media delivery in
MPEG media transport (MMT)
ISO 173571:2014
*Ships and marine technology — Floating
pneumatic rubber fenders — Part 1: High
pressure
ISO 173572:2014
*Ships and marine technology — Floating
pneumatic rubber fenders — Part 2: Low
pressure
NORMES PUBLIEES
ISO
17683:2014
*Ships and marine technology — Ceramic
weld backing for marine use
TC 20
ISO
16290:2013
Space systems — Definition of the
Technology Readiness Levels (TRLs) and
their criteria of assessment
er
Nouvelles Normes internationales publiées entre le 1 janvier
2014 et le 31 janvier 2014.
** Version française de la norme publiée précédemment en
anglais seulement
CIE
International Commission on
Illumination
TC 21
fighting
ISO 116646:2014
Colorimetry — Part 6: CIEDE2000 Colourdifference formula
ISO 61821:2014
systems — Part 1: Requirements and test
methods for sprinklers
PC 251
Asset management
TC 22
Road vehicles
ISO
55000:2014
Asset management — Overview,
principles and terminology
ISO
55001:2014
Asset management — Management
systems — Requirements
ISO
55002:2014
systems — Guidelines for the application
of ISO 55001
TC 6
ISO 160652:2014
*Pulps — Determination of fibre length by
automated optical analysis — Part 2:
Unpolarized light method
ISO
23714:2014
*Pulps — Determination of water retention
value (WRV)
ISO 8856:2014 *Road vehicles — Electrical performance
of starter motors — Test methods and
general requirements
ISO 213085:2014
*Road vehicles — Product data exchange
between chassis and body work
manufacturers (BEP) — Part 5: Coding of
loader crane bodywork
TC 23
Tractors and machinery for agriculture
and forestry
ISO 5718:2013 Harvesting equipment — Blades for
agricultural rotary mowers —
Requirements
TC 29
Small tools
ISO 535:2014 Paper and board — Determination of
water absorptiveness — Cobb method
ISO
23481:2013
Tools for pressing — Cam driver plates
ISO 56363:2013
Paper and board — Determination of air
permeance (medium range) — Part 3:
Bendtsen method
TC 34
Food products
ISO
14470:2011
ISO 56365:2013
Paper and board — Determination of air
permeance (medium range) — Part 5:
Gurley method
*Food irradiation — Requirements for the
development, validation and routine
control of the process of irradiation using
ionizing radiation for the treatment of food
TC 8
ISO 244092:2014
*Ships and marine technology — Design,
location and use of shipboard safety
signs, safety-related signs, safety notices
and safety markings — Part 2: Catalogue
ISO 244093:2014
*Ships and marine technology — Design,
location and use of shipboard safety
signs, safety-related signs, safety notices
and safety markings — Part 3: Code of
ISO 7301:2011 *Rice — Specification
ISO 48332:2013/Cor
1:2014
Microbiology of the food chain —
Horizontal method for the enumeration of
microorganisms — Part 2: Colony count at
30 degrees C by the surface plating
technique — Technical Corrigendum 1
TC 35
ISO
16927:2014
Paints and varnishes — Determination of
the overcoatability and recoatability of a
11
coating
TC 38
deviations relevant to flanks of gear teeth
Textiles
TC 61
Plastics
ISO 2076:2013 Textiles — Man-made fibres — Generic
names
ISO
29221:2014
*Plastics — Determination of mode I
plane-strain crack-arrest toughness
ISO 243621:2014
ISO 157911:2014
Plastics — Development and use of
intermediate-scale fire tests for plastics
products — Part 1: General guidance
ISO 113591:2014
*Plastics — Thermomechanical analysis
(TMA) — Part 1: General principles
TC 67
Materials, equipment and offshore
structures for petroleum,
petrochemical and natural gas
industries
Textiles — Methods for determination of
certain aromatic amines derived from azo
colorants — Part 1: Detection of the use of
certain azo colorants accessible with and
without extracting the fibres
ISO 243623:2014
Textiles — Methods for determination of
certain aromatic amines derived from azo
colorants — Part 3: Detection of the use of
certain azo colorants, which may release
4-aminoazobenzene
ISO 139342:2014
Textiles — Tensile properties of fabrics —
Part 2: Determination of maximum force
using the grab method
ISO
14998:2013
Petroleum and natural gas industries —
Downhole equipment — Completion
accessories
TC 41
Pulleys and belts (including veebelts)
ISO
11960:2014
ISO
17396:2014
*Synchronous belt drives — Metric pitch,
trapezoidal profile systems T and AT, belts
and pulleys
*Petroleum and natural gas industries —
Steel pipes for use as casing or tubing for
wells
TC 69
TC 42
Photography
ISO 162696:2014
ISO
18937:2014
*Imaging materials — Photographic
reflection prints — Methods for measuring
indoor light stability
Statistical interpretation of data — Part 6:
Determination of statistical tolerance
intervals
ISO 78701:2014
*Control charts — Part 1: General
guidelines
TC 43
Acoustics
ISO 78705:2014
*Control charts — Part 5: Specialized
control charts
TC 84
Devices for administration of medicinal
products and intravascular catheters
ISO 105551:2013
Intravascular catheters — Sterile and
single-use catheters — Part 1: General
requirements
TC 85
ISO 3095:2013 Acoustics — Railway applications —
Measurement of noise emitted by
railbound vehicles
TC 44
ISO 5817:2003 *Welding — Fusion-welded joints in steel,
nickel, titanium and their alloys (beam
welding excluded) — Quality levels for
imperfections
TC 45
ISO 3925:2014 Unsealed radioactive substances —
Identification and documentation
ISO 3949:2009 Plastics hoses and hose assemblies —
Textile-reinforced types for hydraulic
applications — Specification
ISO
10282:2014
*Single-use sterile rubber surgical gloves
— Specification
TC 59
ISO 156864:2014
*Building Construction — Service Life
Planning — Part 4: Service Life Planning
using Building Information Modelling
TC 60
Gears
ISO 13281:2013
Cylindrical gears — ISO system of flank
tolerance classification — Part 1:
Definitions and allowable values of
ISO
19238:2014
Radiological protection — Performance
criteria for service laboratories performing
biological dosimetry by cytogenetics
TC 89
Wood-based panels
ISO 1096:2014 *Plywood — Classification
TC 105
Steel wire ropes
ISO
16839:2013
Steel wire ropes — Determination of the
transverse rigidity of steel wire ropes
under no axial load condition
TC 123
Plain bearings
12
ISO 2795:2014 *Plain bearings — Sintered bushes —
Dimensions and tolerances
TC 173
disability
TC 131
ISO 105421:2012/Cor
1:2013
Technical systems and aids for disabled or
handicapped persons — Wheelchair
tiedown and occupant-restraint systems —
Part 1: Requirements and test methods for
all systems — Technical Corrigendum 1
ISO 168403:2014
*Wheelchair seating — Part 3:
Determination of static, impact and
repetitive load strengths for postural
support devices
Fluid power systems
ISO 3320:2013 Fluid power systems and components —
Cylinder bores and piston rod diameters
and area ratios — Metric series
TC 138
ISO/TR
4191:2014
*Plastics piping systems for water supply
— Unplasticized poly(vinyl chloride)(PVCU) and oriented PVC-U (PVC-O) —
Guidance for installation
ISO 158745:2013
*Plastics piping systems for hot and cold
water installations — Polypropylene (PP)
— Part 5: Fitness for purpose of the
system
ISO 44371:2014
*Plastics piping systems for the supply of
gaseous fuels - Polyethylene (PE) — Part
1: General
ISO 44372:2014
2: Pipes
ISO 44373:2014
gaseous fuels — Polyethylene (PE) —
Part 3: Fittings
ISO 44375:2014
5: Fitness for purpose of the system
TC 145
Graphical symbols
ISO 7000:2014 *Graphical symbols for use on equipment
— Registered symbols
TC 147
Water quality
ISO
16665:2014
Water quality — Guidelines for
quantitative sampling and sample
processing of marine soft-bottom
macrofauna
TC 156
Corrosion of metals and alloys
ISO/TR
16208:2014
Corrosion of metals and alloys — Test
method for corrosion of materials by
electrochemical impedance
measurements
ISO/TS 16840- *Wheelchair seating — Part 11:
11:2014
Determination of perspiration dissipation
characteristics of seat cushions intended
to manage tissue integrity
TC 184
Automation systems and integration
ISO 224002:2014
*Automation systems and integration —
Key performance indicators (KPIs) for
manufacturing operations management —
Part 2: Definitions and descriptions
TC 190
Soil quality
ISO
16387:2014
Soil quality — Effects of contaminants on
Enchytraeidae (Enchytraeus sp.) —
Determination of effects on reproduction
TC 202
Microbeam analysis
ISO
17470:2014
*Microbeam analysis — Electron probe
microanalysis — Guidelines for qualitative
point analysis by wavelength dispersive Xray spectrometry
TC 206
Fine ceramics
ISO
17172:2014
*Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Determination of compaction properties of
ceramic powders
TC 210
medical devices
IEC
*Medical devices — Application of
62366:2007/Am usability engineering to medical devices —
Amendment 1
d 1:2014
TC 211
Geographic information/Geomatics
TC 157
Non-systemic contraceptives and STI
barrier prophylactics
ISO/TS 19130- *Geographic information — Imagery
2:2014
sensor models for geopositioning — Part
2: SAR, InSAR, lidar and sonar
ISO
25841:2014
*Female condoms — Requirements and
test methods
ISO
19157:2013
Geographic information — Data quality
TC 159
Ergonomics
TC 213
ISO/TS
20646:2014
*Ergonomics guidelines for the
optimization of musculoskeletal workload
Dimensional and geometrical product
specifications and verification
ISO 25178-
Geometrical product specifications (GPS)
13
605:2014
— Surface texture: Areal — Part 605:
Nominal characteristics of non-contact
(point autofocus probe) instruments
1:2009
techniques — Evaluation criteria for IT
security — Part 1: Introduction and
general model
TC 215
Health informatics
ISO
18104:2014
*Health informatics — Categorial
structures for representation of nursing
diagnoses and nursing actions in
terminological systems
ISO/IEC
18045:2008
techniques — Methodology for IT security
evaluation
ISO/IEC
24759:2014
techniques — Test requirements for
cryptographic modules
ISO/IEC
27000:2014
techniques — Information security
management systems — Overview and
vocabulary
ISO
20301:2014
*Health informatics — Health cards —
General characteristics
ISO 215492:2014
Health informatics — Patient healthcard
data — Part 2: Common objects
ISO 215493:2014
data — Part 3: Limited clinical data
ISO 215494:2014
data — Part 4: Extended clinical data
TC 229
Nanotechnologies
ISO/IEC 27034- *Information technology — Security
1:2011/Cor
techniques — Application security — Part
1:2014
1: Overview and concepts — Technical
Corrigendum 1
ISO/TS 12901- *Nanotechnologies — Occupational risk
2:2014
management applied to engineered
nanomaterials — Part 2: Use of the control
banding approach
ISO/TR
14786:2014
*Nanotechnologies — Considerations for
the development of chemical
nomenclature for selected nano-objects
TC 262
Risk management
ISO/TR
31004:2013
Risk management — Guidance for the
implementation of ISO 31000
TMBG
Technical Management Board - groups
IWA 14-1:2013 *Vehicle security barriers — Part 1:
Performance requirement, vehicle impact
test method and performance rating
IWA 14-2:2013 *Vehicle security barriers — Part 2:
Application
CASCO
Committee on conformity assessment
ISO/IEC TS
Conformity assessment — Requirements
17021-4:2013 for bodies providing audit and certification
of management systems — Part 4:
Competence requirements for auditing
and certification of event sustainability
management systems
ISO/IEC
17025:2005
*General requirements for the competence
of testing and calibration laboratories
JTC 1
4:2008/Amd
integrated circuit cards — Proximity cards
4:2014
— Part 4: Transmission protocol —
Amendment 4: Frame with error correction
ISO/IEC 14496- *Information technology — Coding of
1:2010/Amd
audio-visual objects — Part 1: Systems —
Amendment 2: Support for raw audio2:2014
visual data
12:2012/Amd audio-visual objects — Part 12: ISO base
2:2014
media file format — Amendment 2:
Carriage of timed text and other visual
overlays
16:2011/Amd audio-visual objects — Part 16: Animation
2:2014
Framework eXtension (AFX) —
Amendment 2: Multi-resolution 3D mesh
compression
26:2010/Amd audio-visual objects — Part 26: Audio
3:2014
conformance — Amendment 3:
Conformance for Low Delay AAC v2
profile
ISO/IEC 15444- *Information technology — JPEG 2000
9:2005/Amd
image coding system: Interactivity tools,
5:2014
APIs and protocols — Part 9: —
Amendment 5: UDP transport and
additional enhancements to JPIP
12:2012/Amd image coding system — Part 12: ISO base
2:2014
media file format — Amendment 2:
Carriage of timed text and other visual
overlays
ISO/IEC 23005- *Information technology — Media context
1:2014
and control — Part 1: Architecture
ISO/IEC 23005- *Information technology — Media context
7:2014
and control — Part 7: Conformance and
reference software
ISO/IEC TR
ISO/IEC 15408-*Information technology — Security
14
*Information technology — Governance of
38502:2014
IT — Framework and model
ISO 8681:1986 (reconfirmed)
NORMES CONFIRMEES
Les Normes internationales suivantes sont confirmées pour cinq
ans:
TC 6
ISO 52691:2005
(reconfirmed)
TC 22
Road vehicles
ISO/TS
12927:1999
(reconfirmed)
ISO/TS
12928:1999
(reconfirmed)
ISO
19378:2003
(reconfirmed)
TC 29
Small tools
ISO 78764:2004
(reconfirmed)
ISO
10072:2004
(reconfirmed)
ISO 78765:2004
(reconfirmed)
ISO 119003:2004
(reconfirmed)
ISO 23802:2004
(reconfirmed)
ISO 87642:2004
(reconfirmed)
TC 34
Food products
ISO 85352:2003
(reconfirmed)
ISO 121032:1997
(reconfirmed)
TC 28
ISO
16035:2003
ISO 67431:2002
(reconfirmed)
ISO 67432:1981
(reconfirmed)
ISO 67433:2003
(reconfirmed)
(reconfirmed)
ISO/TS
23647:2010
TC 44
ISO 5182:2008
ISO 67435:2006
ISO
15610:2003
(reconfirmed)
ISO 1561410:2005
(reconfirmed)
ISO 67437:1986
(reconfirmed)
ISO 176521:2003
(reconfirmed)
ISO 67439:2003
(reconfirmed)
ISO 176522:2003
(reconfirmed)
ISO 674313:2002
(reconfirmed)
ISO 176523:2003
(reconfirmed)
ISO 674399:2002
(reconfirmed)
ISO 176524:2003
(reconfirmed)
ISO 82163:1987
(reconfirmed)
ISO 94542:1998
(reconfirmed)
ISO 821699:2002
(reconfirmed)
ISO 94552:1993
(reconfirmed)
15
ISO 94559:1993
(reconfirmed)
22269:2005
ISO 122243:2003
(reconfirmed)
ISO/TR
22898:2006
TC 47
Chemistry
ISO 2209:1973
TC 48
TC 108
ISO/TS
15694:2004
(reconfirmed)
TC 118
Compressors and pneumatic tools,
machines and equipment
Laboratory equipment
TC 119
TC 54
Essential oils
Powder metallurgy
TC 59
TC 122
Packaging
ISO
10591:2005
(reconfirmed)
ISO
11683:1997
(reconfirmed)
ISO
11432:2005
(reconfirmed)
ISO 157501:2002
(reconfirmed)
TC 68
Financial services
ISO 157502:2002
(reconfirmed)
ISO 157503:2002
(reconfirmed)
TC 123
Plain bearings
ISO
16287:2005
(reconfirmed)
TC 138
ISO 136161:2007
ISO 136162:2007
TC 69
ISO 28593:2005
(reconfirmed)
ISO 28595:2005
(reconfirmed)
ISO 134482:2004
(reconfirmed)
ISO
18553:2002
(reconfirmed)
ISO
14560:2004
(reconfirmed)
TC 146
Air quality
(reconfirmed)
ISO 152023:2004
(reconfirmed)
ISO
21247:2005
TC 164
ISO 116481:2003
(reconfirmed)
TC 79
Light metals and their alloys
ISO 727-2:2005(reconfirmed)
ISO 3522:2007
TC 181
ISO
17615:2007
ISO 81244:2010
TC 92
Fire safety
TC 205
ISO/TS
17431:2006
(reconfirmed)
ISO
16814:2008
ISO/TS
(reconfirmed)
ISO
16
Safety of toys
23045:2008
TC 216
Footwear
ISO
17699:2003
ISO
17704:2004
ISO 80853:2001
(replaced by ISO 4437-3:2014)
TC 154
Processes, data elements and
documents in commerce, industry and
administration
ISO/TS 15000- (replaced by )
1:2004
ISO
17707:2005
(reconfirmed)
ISO
19952:2005
(reconfirmed)
ISO
20868:2001
(reconfirmed)
2:2004
3:2004
4:2004
TC 159
NORMES ANNULEES
Ergonomics
ISO/TS 20646- (replaced by ISO/TS 20646:2014)
1:2004
er
TC 21
fighting
ISO/TS
20885:2003
TC 60
Gears
ISO/TR
13593:1999
(replaced by )
TMBG
IWA 1:2005
(replaced by )
IWA 3:2005
(replaced by )
ISO/TR 13989- (replaced by )
1:2000
2:2000
TC 119
Powder metallurgy
ISO/TR
14321:1997
(replaced by )
TC 133
Clothing sizing systems - size
designation, size measurement
methods and digital fittings
ISO/TR
10652:1991
(replaced by )
TC 138
ISO 4437:2007 (replaced by ISO 4437-1:2014, ISO 44372:2014, ISO 4437-3:2014, ISO 44375:2014)
ISO 80851:2001
ISO 80852:2001
17
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 février 2014 au 28 février 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
COPOLCO
Committee on consumer policy
ISO/IEC
DGuide 50
*Safety aspects — Guidelines for child
safety in standards and other
specifications
(Revision of ISO/IEC Guide 50:2002)
TC 4
Rolling bearings
ISO/DIS
3290-1.2
*Rolling bearings — Balls — Part 1:
Steel balls
ISO/DIS
3290-2.2
Ceramic balls
TC 8
ISO/DIS
29400
Ships and marine technology — Offshore
wind energy — Ports and marine
operations
ISO/DIS
16554.3
Ships and marine technology —
Measurement and reporting of
underwater sound radiated from
merchant ships — Survey measurement
in deep-water
ISO/DIS
18289
Navigation and shallow-water
engineering vessels — Anchor winches
ISO/DIS
18296
*Ships and marine technology — Shipshifting winches
Nieuwe publicaties
Frans.
ISO/DIS 6218 *Inland navigation vessels — Manuallyand power-operated coupling devices for
pushing units and coupled vessels —
Safety requirements and main
dimensions
TC 17
Steel
ISO/DIS
16574
*Determination of percentage of
resolvable pearlite in the high carbon
steel wire rod
ISO/DIS 4995 *Hot-rolled steel sheet of structural
18
quality
TC 35
ISO/DIS 4630 *Clear liquids — Estimation of colour by
the Gardner colour scale
(Revision of ISO 4630-1:2004, ISO 46302:2004)
ISO/DIS 4996 *Hot-rolled steel sheet of high yield
stress structural quality
ISO/DIS 4997 *Cold-reduced carbon steel sheet of
structural quality
TC 22
ISO/DIS 6271 *Clear liquids — Estimation of colour by
the platinum-cobalt colour scale
Road vehicles
ISO/DIS 3894 *Road vehicles — Wheels/rims for
commercial vehicles — Test methods
ISO/DIS 8623 *Tall-oil fatty acids for paints and
varnishes — Test methods and
characteristic values
ISO/DIS
6460-2
TC 39
Machine tools
ISO/DIS
10791-7.2
*Test conditions for machining centres —
Part 7: Accuracy of a finished test piece
ISO/DIS
11090-1.2
*Test conditions for die sinking electrodischarge machines (die sinking EDM)
— Testing of the accuracy — Part 1:
Single-column machines (cross-slide
table type and fixed-table type)
ISO/DIS
11090-2.2
*Test conditions for die sinking electrodischarge machines (die sinking EDM)
— Testing of the accuracy — Part 2:
Double-column machines (slide-head
type)
ISO/DIS
14137
*Test conditions for wire electricaldischarge machines (wire EDM) —
Testing of the accuracy
TC 43
Acoustics
*Motorcycles — Measurement method
for gaseous exhaust emissions and fuel
consumption — Part 2: Test cycles and
specific test conditions
ISO/DIS
12617.2
Road vehicles — Liquefied natural gas
(LNG) refuelling connector — 3.1 MPa
connector
TC 23
ISO/DIS
16231-2
*Self-propelled agricultural machinery —
Assessment of stability — Part 2:
Determination of static stability and test
procedures
ISO/DIS
23205
*Agricultural tractors — Instructional seat
TC 28
ISO/DIS
26422
*Petroleum and related products —
Determination of shear stability of
lubricating oils containing polymers —
Method using a tapered roller bearing
TC 29
ISO/DIS 6926 *Acoustics — Requirements for the
performance and calibration of reference
sound sources used for the
determination of sound power levels
Small tools
ISO/DIS 3317 *Assembly tools for screws and nuts —
Square drive adaptor with hexagon or
cylindrical flat drive, for power socket
wrenches
TC 45
TC 34
Food products
ISO/DIS
1823.2
ISO/DIS
11085
*Cereals, cereals-based products and
animal feeding stuffs — Determination of
crude fat and total fat content by the
Randall extraction method
*Rubber hose and hose assemblies for
oil suction and discharge service —
Specification
ISO/DIS
17324
*Rubber hoses for automotive
turbochargers — Specification
*Animal feeding stuffs — Determination
of water-soluble chlorides content — Part
1: Titrimetric method
ISO
*Rubber hoses and hose assemblies,
28017:2011/D wire or textile reinforced, for dredging
Amd 1
applications — Specification —
Amendment 1
ISO/DIS
6495-1
19
ISO/DIS 1817 *Rubber, vulcanized or thermoplastic —
Determination of the effect of liquids
TC 46
TC 85
ISO/DIS 8769 *Reference sources — Calibration of
surface contamination monitors —
Alpha-, beta- and photon emitters
ISO/DIS 5127 *Information and documentation —
Foundation and Vocabulary
TC 48
ISO/DIS 4797 *Laboratory glassware — Boiling flasks
with conical ground joints
ISO/DIS
15382
*Radiological protection — Procedures
for monitoring the dose to the lens of the
eye, the skin and the extremities
TC 61
Plastics
ISO/DIS
18589-2
ISO/DIS
19062-1
*Plastics — Acrylonitrile-butadienestyrene (ABS) moulding and extrusion
materials — Part 1: Designation system
and basis for specifications
*Measurement of radioactivity in the
environment — Soil — Part 2: Guidance
for the selection of the sampling strategy,
sampling and pre-treatment of samples
ISO/DIS
21909-1
*Passive neutron dosimetry systems —
Part 1: Performance and test
requirements for personal dosimetry
21909:2005/Cor 1:2007)
TC 91
ISO/DIS
16560.2
*Surface active agents — Determination
of polyethylene glycol content in nonionic
ethoxylated surfactants — HPLC method
TC 96
Cranes
ISO/DIS
19063-1
ISO/DIS
19064-1
ISO/DIS
19095-1
*Plastics — Impact-resistant polystyrene
(PS-I) moulding and extrusion materials
— Part 1: Designation system and basis
for specifications
*Plastics — Styrene/acrylonitrile (SAN)
moulding and extrusion materials — Part
1: Designation system and basis for
specifications
ISO 9928*Cranes — Crane driving manual — Part
2:2007/DAmd 2: Mobile crane operators — Amendment
1
1: .
*Adhesives — Evaluation of the
adhesion interface performance in
plastic-metal assemblies — Part 1:
Guidelines for the approach
ISO/DIS
19095-2
plastic-metal assemblies — Part 2: Test
specimens
ISO/DIS
19095-3
plastic-metal assemblies — Part 3: Test
methods
TC 106
Dentistry
ISO/DIS
3630-3
*Dentistry — Endodontic instruments —
Part 3: Compactors: pluggers and
spreaders
ISO/DIS
17937
*Dentistry — Osteotome for bone
compaction and sinus floor elevation
TC 108
ISO/DIS
19095-4
plastic-metal assemblies — Part 4:
Environmental condition for durability
ISO/DIS
10816-21
*Mechanical vibration — Evaluation of
machine vibration by measurements on
non-rotating parts — Part 21: Horizontal
axis wind turbines with gearbox
TC 76
Transfusion, infusion and injection,
and blood processing equipment for
medical and pharmaceutical use
ISO/DIS
18129
machines — Approaches for
performance diagnosis
ISO/DIS
15378
*Primary packaging materials for
medicinal products — Particular
requirements for the application of ISO
9001:2008, with reference to Good
Manufacturing Practice (GMP)
TC 110
Industrial trucks
ISO/DIS
10896-4
*Rough-terrain trucks — Safety
requirements and verification — Part 4:
Additional requirements for variable
reach trucks handling freely suspended
20
loads
TC 111
Round steel link chains, chain slings,
components and accessories
ISO/DIS
16872
*Round steel short link chains for lifting
purposes — Fine tolerance hoist chains
for hand operated chain hoists — Grade
VH
ISO/DIS
16877
ISO/DIS 8157 *Fertilizers and soil conditioners —
Vocabulary
*Round steel short link chains for lifting
purposes — Fine tolerance hoist chains
for hand operated chain hoists — Grade
TH
TC 114
Horology
ISO/DIS
3764.3
*Timekeeping instruments — Movements
— Types, dimensions and nomenclature
TC 117
Fans
ISO/DIS
13350
*Fans — Performance testing of jet fans
13350:1999/DAmd 1)
TC 121
equipment
IEC/DIS
60601-1-11
Medical electrical equipment — Part 111: General requirements for basic
safety and essential performance —
Collateral standard: Requirements for
medical electrical equipment and medical
electrical systems used in the home
healthcare environment
(Revision of IEC 60601-1-11:2010, IEC
60601-1-11:2010/Cor 1:2011)
TC 130
Graphic technology
ISO/DIS
14861
*Graphic technology — Requirements for
colour soft proofing systems
TC 131
Fluid power systems
ISO/DIS
19973-1
*Pneumatic fluid power — Assessment
of component reliability by testing — Part
1: General procedures
ISO/DIS
19973-2
ISO/DIS
19973-3
TC 134
2: Directional control valves
3: Cylinders with piston rod
Fertilizers and soil conditioners
ISO/DIS
17318
*Fertilizers and soil conditioners —
Determination of arsenic, cadmium,
chromium, lead and mercury contents
ISO/DIS
17319
*Fertilizers — Determination of
potassium content — Potassium
tetraphenylborate gravimetric method
TC 135
ISO/DIS
18563-3
*Non-destructive testing —
Characterization and verification of
ultrasonic phased array equipment —
Part 3: Combined system
TC 149
Cycles
ISO/DIS
6742-1
*Cycles — Lighting and retro-reflective
devices — Part 1: Lighting and light
signalling devices
ISO/DIS
6742-2
devices — Part 2: Retro-reflective
devices
ISO/DIS
6742-3
devices — Part 3: Installation and use of
lighting and retro-reflective devices
ISO/DIS
6742-4
devices — Part 4: Lighting systems
powered by the cycle's movement
ISO/DIS
6742-5
devices — Part 5: Lighting systems not
powered by the cycle's movement
TC 158
Analysis of gases
ISO/DIS
6142-1
*Gas analysis — Preparation of
calibration gas mixtures — Part 1:
Gravimetric method for Class I mixtures
6142:2001/Amd 1:2009)
ISO/DIS
19229
*Gas analysis — Purity analysis and the
treatment of purity data
TC 159
Ergonomics
ISO/DIS
9241-391.2
*Ergonomics of Human System
Interaction — Part 391: Requirements,
analysis and compliance test methods
for the reduction of photosensitive
seizures
TC 165
Timber structures
ISO/DIS
16598
*Timber structures — Structural
classification for sawn timber
21
profile tolerancing in a general datum
system
TC 172
ISO/DIS
15004-2
*Ophthalmic instruments — Fundamental
requirements and test methods — Part 2:
Light hazard protection
ISO/DIS
18259
ISO/DIS
11145
*Ophthalmic optics — Contact lens care
products — Method to assess contact
lens care products with contact lenses in
a lens case, challenged with bacterial
and fungal organisms
*Optics and photonics — Lasers and
laser-related equipment — Vocabulary
and symbols
TC 215
Health informatics
ISO/DIS
17090-4
*Health informatics — Public key
infrastructure — Part 4: Digital
Signatures for healthcare documents
TC 217
Cosmetics
ISO/DIS
16128-1
*Guidelines on Technical Definitions and
Criteria for Natural & Organic Cosmetic
Ingredients and Products — Part 1:
Definitions for Ingredients
TC 219
Floor coverings
TC 182
Geotechnics
ISO/DIS
16905
*Resilient floor coverings — Specification
for rubber floor covering — Tile/Plank
ISO/DIS
22476-9
*Ground investigation and testing —
Field testing — Part 9: Field vane test
ISO/DIS
16906
*Resilient Floor Coverings —
Determination of seam strength
ISO/DIS
22476-15
*Geotechnical investigation and testing
— Field testing — Part 15: Measuring
while drilling
ISO/DIS
24334
ISO/DIS
22477-10
— Testing of geotechnical structures —
Part 10: Testing of piles: rapid load
testing
*Laminate floor coverings —
Determination of locking strength for
mechanically assembled panels
TC 228
Tourism and related services
ISO/DIS
13687
*Yacht Harbours — Minimum
Requirements
TC 234
Fisheries and aquaculture
ISO/DIS
16488
*Marine finfish farms — Open net cage
— Design and operation
ISO/DIS
16541
*Methods for sea lice surveillance on
marine finfish farms
ISO/DIS
16741
*Traceability of Crustacean products —
Specifications on the information to be
recorded in farmed Crustacean
distribution chains
CASCO
ISO/IEC DIS
17021-1
*Conformity assessment —
Requirements for bodies providing audit
and certification of management systems
— Part 1: Requirements
TC 198
Sterilization of health care products
ISO/DIS
15883-7
*Washer-disinfectors — Part 7:
Requirements and tests for washerdisinfectors employing chemical
disinfection for non-invasive, non-critical
thermolabile medical devices and
healthcare equipment (ISO/DIS 158837:2014)
TC 204
ISO/DIS
24014-1
*Public transport — Interoperable fare
management system — Part 1:
Architecture
TC 210
medical devices
ISO/DIS
13485
*Medical devices — Quality management
systems — Requirements for regulatory
purposes
13485:2003/Cor 1:2009)
JTC 1
TC 213
ISO/IEC DIS
18033-1
ISO/DIS
8062-4
*Geometrical Product Specifications
(GPS) — Dimensional and geometrical
tolerances for moulded parts — Part 4:
General tolerances for castings using
techniques — Encryption algorithms —
Part 1: General
ISO/IEC
14496-
audio-visual objects — Part 4:
ISO/IEC/IEEE Software and systems engineering —
DIS 29119-4.2 Software testing — Part 4: Test
techniques
22
4:2004/DAmd Conformance testing — Amendment 42:
42
Conformance testing of Multi-Resolution
Frame Compatible Stereo Coding
extension of AVC
13933
calcium and magnesium — Inductively
coupled plasma atomic emisson
TC 21
fighting
ISO/FDIS
7240-1
*Fire detection and alarm systems — Part
1: General and definitions
TC 22
Road vehicles
ISO/FDIS
12614-1
*Road vehicles — Liquefied natural gas
(LNG) fuel system components — Part 1:
General requirements and definitions
ISO/FDIS
12614-2
Performance and general test methods
ISO/FDIS
12614-3
Check valve
ISO/FDIS
12614-4
Manual valve
ISO/FDIS
12614-5
Tank pressure gauge
ISO/FDIS
12614-6
Pressure regulator
ISO/FDIS
12614-7
Pressure relief valve
ISO/FDIS
12614-8
Excess flow valve
ISO/FDIS
12614-9
Gas-tight housing and ventilation hose
ISO/FDIS
12614-10
Rigid fuel line in stainless steel
ISO/FDIS
12614-11
Fittings
TC 6
ISO/FDIS
12614-12
Rigid fuel line in copper and its alloys
ISO/FDIS
12614-13
Pressure control regulator
ISO/FDIS
ISO/IEC
144965:2001/DAmd
33
audio-visual objects — Part 5: Reference
software — Amendment 33: Reference
software for MVC plus depth extension of
AVC
ISO/IEC
144965:2001/DAmd
34
software — Amendment 34: Reference
software of the Multi-resolution frame
compatible stereo conding of AVC
ISO/IEC
230032:2010/DAmd
3
*Information technology — MPEG audio
technologies — Part 2: Spatial Audio
Object Coding (SAOC) — Amendment 3:
Dialog enhancement
ISO/IEC DIS
23008-10
MPEG Media Transport Forward Error
Correction (FEC) codes
ISO/IEC DIS
23008-11
MPEG Media Transport Composition
Information
ISO/IEC DIS
15438
*Information technology — Automatic
identification and data capture
techniques — PDF417 bar code
symbology specification
ISO/IEC DIS
16480
techniques — Reading and display of
ORM by mobile devices
PROJETS FINALS
er
ISO/FDIS 2758 *Paper — Determination of bursting
strength
TC 17
Steel
ISO/FDIS
*Steel and iron — Determination of
23
12614-14
Differential pressure fuel content gauge
TC 39
Machine tools
ISO/FDIS
12614-15
Capacitance fuel content gauge
ISO/FDIS
1986-1
ISO/FDIS
12614-16
Heat exchanger - vaporizer
*Test conditions for surface grinding
machines with horizontal grinding wheel
spindle and reciprocating table — Testing
of the accuracy — Part 1: Machines with a
table length of up to 1 600 mm
ISO/FDIS
12614-17
Natural gas detector
TC 43
Acoustics
ISO/FDIS
16251-1
ISO/FDIS
12614-18
Gas temperature sensor
*Acoustics — Laboratory measurement of
the reduction of transmitted impact noise
by floor coverings on a small floor mockup — Part 1: Heavyweight compact floor
TC 44
ISO/FDIS
13469
Mechanical joining — Form-fit blind rivets
and (lock) bolt joints — Specifications and
qualification of testing procedures
ISO/FDIS
15614-12
*Specification and qualification of welding
procedures for metallic materials —
Welding procedure test — Part 12: Spot,
seam and projection welding
ISO/FDIS
9455-5
*Soft soldering fluxes — Test methods —
Part 5: Copper mirror test
TC 45
ISO/FDIS
12619-1.2
*Road vehicles — Compressed gaseous
hydrogen (CGH2) and hydrogen/natural
gas blend fuel system components — Part
1: General requirements and definitions
ISO/FDIS
12619-2.2
2: Performance and general test methods
ISO/FDIS
12619-3.2
3: Pressure regulator
TC 24
sieving
ISO/FDIS
13322-1
ISO/FDIS 6808 *Plastics hoses and hose assemblies for
suction and low-pressure discharge of
petroleum liquids — Specification
*Particle size analysis — Image analysis
methods — Part 1: Static image analysis
methods
ISO/FDIS 8330 *Rubber and plastics hoses and hose
assemblies — Vocabulary
TC 28
ISO/FDIS
5163.2
*Petroleum products — Determination of
knock characteristics of motor and aviation
fuels — Motor method
5163:2005/Cor 1:2008)
ISO/FDIS
5164.2
knock characteristics of motor fuels —
Research method
ISO/FDIS
17198
*Dimethyl ether (DME) for fuels —
Determination of total sulfur, ultraviolet
fluorescence method
TC 38
Textiles
ISO/FDIS
16373-2
*Textiles — Dyestuffs — Part 2: General
method for the determination of
extractable dyestuffs including allergenic
and carcinogenic dyestuffs (method using
pyridine-water)
ISO/FDIS
27127
Thermoplastic multi-layer (non-vulcanized)
hoses and hose assemblies for the
transfer of liquid petroleum gas and
liquefied natural gas — Specification
TC 51
Pallets for unit load method of
materials handling
ISO/FDIS
18333
Pallets for materials handling — Quality of
new wooden components for flat pallets
TC 54
Essential oils
ISO/FDIS 3218 *Essential oils — Principles of
nomenclature
TC 58
Gas cylinders
ISO/FDIS
9809-4
*Gas cylinders — Refillable seamless
steel gas cylinders — Design, construction
and testing — Part 4: Stainless steel
cylinders with an Rm value of less than 1
24
100 MPa
2
TC 61
Plastics
ISO/FDIS
11403-3
*Plastics — Acquisition and presentation
of comparable multipoint data — Part 3:
Environmental influences on properties
ISO 9902*Textile machinery — Noise test code —
6:2001/FDAmd Part 6: Fabric manufacturing machinery —
2
Amendment 2
7:2001/FDAmd Part 7: Dyeing and finishing machinery —
2
Amendment 2
ISO/FDIS
11358-2
*Plastics — Thermogravimetry (TG) of
polymers — Part 2: Determination of
activation energy
ISO/FDIS
22007-6
*Plastics — Determination of thermal
conductivity and thermal diffusivity — Part
6: Comparative method for low thermal
conductivities using a temperaturemodulation technique
ISO/FDIS
13106
*Plastics — Blow-moulded polypropylene
containers for packaging of liquid
foodstuffs
ISO/FDIS
15114
*Fibre-reinforced plastic composites —
Determination of the mode II fracture
resistance for unidirectionally reinforced
materials using the calibrated end-loaded
split (C-ELS) test and an effective crack
length approach
TC 67
industries
ISO/FDIS
21809-2
TC 72
machinery — Amendment 2
External coatings for buried or submerged
pipelines used in pipeline transportation
systems — Part 2: Single layer fusionbonded epoxy coatings
21809-2:2007/Cor 1:2008)
TC 85
ISO/FDIS
15366-1
*Nuclear fuel technology — Chemical
separation and purification of uranium and
plutonium in nitric acid solutions for
isotopic and isotopic dilution analysis by
solvent extraction chromatography — Part
1: Samples containing plutonium in the
microgram range and uranium in the
milligram range
ISO/FDIS
15366-2
2: Samples containing plutonium and
uranium in the nanogram range and below
TC 106
Dentistry
ISO/FDIS
11499
*Dentistry — Single-use cartridges for
local anaesthetics
TC 108
ISO/FDIS
10816-8
*Mechanical vibration — Evaluation of
non-rotating parts — Part 8: Reciprocating
compressor systems
ISO/FDIS
16063-16
*Methods for the calibration of vibration
and shock transducers — Part 16:
Calibration by Earth's gravitation
TC 110
Industrial trucks
ISO/FDIS
22915-3
*Industrial trucks — Verification of stability
— Part 3: Reach and straddle trucks
ISO/FDIS
22915-5
— Part 5: Single-side-loading trucks
ISO/FDIS
22915-16
— Part 16: Pedestrian-propelled trucks
TC 121
Textile machinery and accessories
1:2001/FDAmd Part 1: Common requirements —
2
Amendment 2
2:2001/FDAmd Part 2: Spinning preparatory and spinning
2
3:2001/FDAmd Part 3: Nonwoven machinery —
2
Amendment 2
4:2001/FDAmd Part 4: Yarn processing, cordage and rope
2
manufacturing machinery — Amendment
2
5:2001/FDAmd Part 5: Weaving and knitting preparatory
25
ISO/FDIS
18082
*Anaesthetic and respiratory equipment —
Dimensions of non-interchangeable
screw-threaded (NIST) low-pressure
connectors for medical gases
ISO/FDIS
23317
*Implants for surgery — In vitro evaluation
for apatite-forming ability of implant
materials
ISO/FDIS
80601-2-69
*Medical electrical equipment — Part 269: Particular requirements for basic
oxygen concentrator equipment
TC 156
ISO/FDIS
6509-1
TC 123
Plain bearings
*Corrosion of metals and alloys —
Determination of dezincification resistance
of copper alloys with zinc — Part 1: Test
method
ISO/FDIS
3548-1
*Plain bearings — Thin-walled half
bearings with or without flange — Part 1:
Tolerances, design features and methods
of test
TC 163
ISO/FDIS
10916
Calculation of the impact of daylight
utilization on the net and final energy
demand for lighting
TC 172
TC 138
ISO/FDIS
17484-1
*Plastics piping systems — Multilayer pipe
systems for indoor gas installations with a
maximum operating pressure up to and
including 5 bar (500 kPa) — Part 1:
Specifications for systems
17484-1:2006/Cor 1:2008)
ISO/FDIS
17328
*Optics and photonics — Optical materials
and components — Test method for
refractive index of infrared optical
materials
ISO/FDIS
15362
*Stereomicroscopes — Information
provided to the user
TC 146
Air quality
ISO/FDIS
16000-27
*Indoor air — Part 27: Determination of
settled fibrous dust on surfaces by SEM
(scanning electron microscopy) (direct
method)
ISO/FDIS
8598-1.2
Focimeters — Part 1: General purpose
instruments used for measuring spectacle
lenses
8598:1996/Cor 1:1998)
ISO/FDIS
16000-29
*Indoor air — Part 29: Test methods for
VOC detectors
ISO/FDIS
13212
ISO/FDIS
16000-30
*Indoor air — Part 30: Sensory testing of
indoor air
products — Guidelines for determination
of shelf-life
TC 149
Cycles
TC 173
disability
ISO/FDIS
7176-22
*Wheelchairs — Part 22: Set-up
procedures
TC 181
Safety of toys
ISO/FDIS 8098 *Cycles — Safety requirements for
bicycles for young children
TC 150
ISO/FDIS
5832-4
*Implants for surgery — Metallic materials
— Part 4: Cobalt-chromium-molybdenum
casting alloy
ISO/FDIS
5832-11
*Implants for surgery — Metallic materials
— Part 11: Wrought titanium 6-aluminium
7-niobium alloy
ISO/FDIS
13179-1
*Implants for surgery — Plasma-sprayed
unalloyed titanium coatings on metallic
surgical implants — Part 1: General
requirements
ISO 8124*Safety of toys — Part 4: Swings, slides
4:2010/FDAmd and similar activity toys for indoor and
2
outdoor family domestic use —
Amendment 2: Paddling pools
TC 185
Safety devices for protection against
excessive pressure
ISO/FDIS
4126-6
*Safety devices for protection against
excessive pressure — Part 6: Application,
selection and installation of bursting disc
safety devices
26
TC 188
5
Small craft
ISO 12215*Small craft — Hull construction and
5:2008/FDAmd scantlings — Part 5: Design pressures for
1
monohulls, design stresses, scantlings
determination — Amendment 1
TC 189
Ceramic tile
ISO/FDIS
10545-8
*Ceramic tiles — Part 8: Determination of
linear thermal expansion
TC 215
Health informatics
ISO/FDIS
22600-1
*Health informatics — Privilege
management and access control — Part
1: Overview and policy management
(Revision of ISO/TS 22600-1:2006)
— Part 2: Radio frequency power and
signal interface — Amendment 5: Bit rates
of 3fc/4, fc, 3fc/2 and 2fc from PCD to
PICC
ISO/IEC FDIS *Information technology — Coding of
14496-15
audio-visual objects — Part 15: Carriage
of network abstraction layer (NAL) unit
structured video in ISO base media file
format
(Revision of ISO/IEC 14496-15:2010,
ISO/IEC 14496-15:2010/Amd 1:2011,
ISO/IEC 14496-15:2010/Cor 1:2011,
ISO/IEC 14496-15:2010/Cor 2:2012,
ISO/IEC 14496-15:2010/DAmd 2)
ISO/IEC FDIS *Information technology — Conformance
29109-5
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 — Part 5: Face image data
ISO/FDIS
22600-2
2: Formal models
TC 219
Floor coverings
ISO/FDIS
17984
Machine-made textile floor coverings —
Determination of dimensional changes
after exposure to heat and/or water
(Revision of ISO/PAS 17984:2001)
TC 226
Materials for the production of primary
aluminium
ISO/FDIS
12986-1
Carbonaceous materials used in the
production of aluminium — Prebaked
anodes and cathode blocks — Part 1:
Determination of bending/shear strength
by a three-point method
TC 6
ISO
16945:2014
*Corrugating medium — Determination of
the edge crush resistance after laboratory
fluting
TC 8
ISO/FDIS
12986-2
Carbonaceous materials used in the
Determination of flexural strength by the
four-point method
ISO 280042:2014
*Security management systems for the
supply chain — Guidelines for the
implementation of ISO 28000 — Part 2:
Guidelines for adopting ISO 28000 for use
in medium and small seaport operations
TC 247
Fraud countermeasures and controls
ISO 280043:2014
ISO/FDIS
16678
*GuideIines for interoperable object
identification and related authentication
systems to deter counterfeiting and illicit
trade
Additional specific guidance for adopting
ISO 28000 for use by medium and small
businesses (other than marine ports)
JTC 1
ISO 280044:2014
Additional specific guidance on
implementing ISO 28000 if compliance
with ISO 28001 is a management
objective
ISO
*Ships and marine technology — Gyro-
NORMES PUBLIEES
ISO/IEC FDIS Identification cards — Optical memory
11694-6
cards — Linear recording method — Part
6: Use of biometrics on an optical memory
card
ISO/IEC 14443-*Identification cards — Contactless
2:2010/FDAmd integrated circuit cards — Proximity cards
27
er
Nouvelles Normes internationales publiées entre le 1 février
2014 et le 28 février 2014.
anglais seulement
16328:2014
compasses for high-speed craft
TC 23
ISO 220901:2014
Transmitting heading devices (THDs) —
Part 1: Gyro-compasses
and forestry
ISO 57212:2014
ISO 220902:2014
Part 2: Geomagnetic principles
Agricultural tractors-- Requirements, test
procedures and acceptance criteria for the
operator's field of vision — Part 2:
Field of vision to the side and to the rear
ISO 220903:2014
Part 3: GNSS principles
ISO
18422:2014
*Ships and marine technology — Inland
navigation vessels — Plate with
instructions for rescue, resuscitation and
first aid for drowning persons
TC 10
Technical product documentation
ISO 12824:2014
Technical drawings — General principles
of presentation — Part 24: Lines on
mechanical engineering drawings
TC 17
ISO
*Agricultural tractors — Requirements for
10998:2008/Am steering — Amendment 1
d 1:2014
Steel
ISO 7778:2014 *Through-thickness characteristics for
steel products
ISO
22854:2014
Liquid petroleum products —
Determination of hydrocarbon types and
oxygenates in automotive-motor gasoline
and in ethanol (E85) automotive fuel —
Multidimensional gas chromatography
method
TC 29
Small tools
ISO/TS 13399- *Cutting tool data representation and
2:2014
exchange — Part 2: Reference dictionary
for the cutting items
3:2014
for tool items
ISO 5954:2014 *Cold-reduced carbon steel sheet
according to hardness requirements
TC 20
TC 28
ISO 5859:2014 *Aerospace series — Graphic symbols for
schematic drawings of hydraulic and
pneumatic systems and components
ISO
16127:2014
*Space systems — Prevention of break-up
of unmanned spacecraft
ISO
16691:2014
*Space systems — Thermal control
coatings for spacecraft — General
requirements
ISO
16695:2014
*Space environment (natural and artificial)
— Geomagnetic reference models
TC 22
Road vehicles
ISO 88202:2014
User guidelines
ISO 109242:2014
*Road vehicles — Circuit breakers — Part
2: User's guide
ISO 150314:2014
*Road vehicles — Communication
between vehicle and external equipment
for emissions-related diagnostics — Part
4: External test equipment
4:2014
for adaptive items
5:2014
for assembly items
60:2014
for connection systems
ISO 119013:2014
*Tools for pressing — Gas springs — Part
3: Gas spring with increased spring force
and compact built height
ISO 119014:2014
*Tools for pressing — Gas springs — Part
4: Gas springs with increased spring force
and same built height
ISO 23513:2014
Assembly tools for screws and nuts —
Machine-operated screwdriver bits — Part
3: Screwdriver bits for hexagon socket
screws
TC 31
Tyres, rims and valves
ISO
*Tyre valves for aircraft —
7295:1988/Amd Interchangeability dimensions —
Amendment 1
1:2014
ISO/TS
13499:2014
*Road vehicles — Multimedia data
exchange format for impact tests
ISO/TS
18506:2014
*Procedure to construct injury risk curves
for the evaluation of road user protection
in crash tests
TC 34
Food products
ISO
14244:2014
Oilseed meals — Determination of soluble
proteins in potassium hydroxide solution
28
ISO 89681:2014
Milk and milk products — Determination of
nitrogen content — Part 1: Kjeldahl
principle and crude protein calculation
ISO 6539:2014 *Cinnamon (Cinnamomum zeylanicum
Blume) — Specification
TC 35
ISO
16925:2014
the resistance of coatings to pressure
water-jetting
TC 37
Terminology and other language and
content resources
ISO 246151:2014
*Language resource management —
Syntactic annotation framework (SynAF)
— Part 1: Syntactic model
TC 38
Textiles
ISO 1813:2014 Belt drives — V-ribbed belts, joined Vbelts and V-belts including wide section
belts and hexagonal belts — Electrical
conductivity of antistatic belts:
Characteristics and methods of test
*Belt drive — V-ribbed belts for the
automotive industry — Fatigue test
TC 42
Photography
ISO
12233:2014
*Photography — Electronic still picture
imaging — Resolution and spatial
frequency responses
TC 43
Acoustics
*Polyurethane tubing for use primarily in
pneumatic installations — Dimensions and
specification
ISO 289-1:2014Rubber, unvulcanized — Determinations
using a shearing-disc viscometer — Part
1: Determination of Mooney viscosity
ISO 6914:2013 Rubber, vulcanized or thermoplastic —
Determination of ageing characteristics by
measurement of stress relaxation in
tension
ISO 2322:2014 *Styrene-butadiene rubber (SBR) —
Emulsion- and solution-polymerized types
— Evaluation procedures
ISO 2403:2014 *Textiles — Cotton fibres — Determination
of micronaire value
ISO
11749:2014
ISO 2929:2014 *Rubber hoses and hose assemblies for
bulk fuel delivery by truck — Specification
ISO/TS
11619:2014
ISO/TS 22002- Prerequisite programmes on food safety
4:2013
— Part 4: Food packaging manufacturing
TC 41
TC 45
ISO 2393:2014 *Rubber test mixes — Preparation, mixing
and vulcanization — Equipment and
procedures
ISO 2476:2014 *Butadiene rubber (BR) — Solutionpolymerized types — Evaluation
procedures
ISO
17403:2014
*Rubber — Determination of magnesium
content of field and concentrated natural
rubber latices by titration (cyanide-free
method)
ISO
14285:2014
*Rubber and plastics gloves for food
services — Limits for extractable
substances
TC 46
ISO 2789:2013 Information and documentation —
International library statistics
TC 58
Gas cylinders
ISO 1680:2013 Acoustics — Test code for the
measurement of airborne noise emitted by
rotating electrical machines
ISO 5145:2014 Cylinder valve outlets for gases and gas
mixtures — Selection and dimensioning
TC 61
Plastics
ISO 162831:2014
*Acoustics — Field measurement of sound
insulation in buildings and of building
elements — Part 1: Airborne sound
insulation
ISO
15850:2014
*Plastics — Determination of tensiontension fatigue crack propagation —
Linear elastic fracture mechanics (LEFM)
approach
TC 44
ISO
15028:2014
*Plastics — Aromatic isocyanates for use
in the production of polyurethanes —
Determination of hydrolysable chlorine
ISO
21048:2014
*Plastics — Epoxy resins — Determination
of 1,2-glycol content
ISO
25761:2014
*Plastics — Polyols for use in the
production of polyurethanes —
Determination of basicity (total amine
ISO 5826:2014 Resistance welding equipment —
Transformers — General specifications
applicable to all transformers
ISO 5817:2014 Welding — Fusion-welded joints in steel,
nickel, titanium and their alloys (beam
welding excluded) — Quality levels for
imperfections
29
steel elements
value), expressed as percent nitrogen
TC 67
industries
ISO/TR 16730- Fire safety engineering — Assessment,
3:2013
verification and validation of calculation
methods — Part 3: Example of a CFD
model
ISO
10432:2004
Downhole equipment — Subsurface
safety valve equipment
TC 96
Cranes
ISO 102452:2014
*Cranes — Limiting and indicating devices
— Part 2: Mobile cranes
ISO
13625:2002
Drilling and production equipment —
Marine drilling riser couplings
TC 104
Freight containers
ISO
13626:2003
Drilling and well-servicing structures
TC 105
Steel wire ropes
ISO
17824:2009
Downhole equipment — Sand screens
ISO
16841:2014
Steel wire ropes — Pulling eyes for rope
installation — Types and minimum
requirements
TC 76
TC 108
ISO 88712:2003/Amd
1:2005
Elastomeric parts for parenterals and for
devices for pharmaceutical use — Part 2:
Identification and characterization —
Amendment 1
ISO 184364:2014
Condition monitoring and diagnostics of
— Part 4: Field lubricant analysis
TC 85
ISO 184366:2014
ISO
28057:2014
Dosimetry with solid thermoluminescence
detectors for photon and electron
radiations in radiotherapy
— Part 6: Acoustic emission
TC 110
Industrial trucks
TC 89
Wood-based panels
ISO 36915:2014
ISO
13608:2014
*Plywood — Decorative veneered plywood
Industrial trucks — Safety requirements
and verification — Part 5: Pedestrianpropelled trucks
TC 114
Horology
ISO
13609:2014
*Wood-based panels — Plywood —
Blockboards and battenboards
IEC 600863:2011
*Primary batteries — Part 3: Watch
batteries
TC 92
Fire safety
TC 117
Fans
ISO/TS
3814:2014
*Standard tests for measuring reaction-tofire of products and materials — Their
development and application
ISO 273272:2014
*Fans — Air curtain units — Part 2:
Laboratory methods of testing for sound
power
ISO 137841:2014
*Reaction to fire test for sandwich panel
building systems — Part 1: Small room
test
TC 121
ISO 810602:2013
ISO 83410:2014
*Fire resistance tests — Elements of
building construction — Part 10: Specific
requirements to determine the contribution
of applied fire protection materials to
structural steel elements
Non-invasive sphygmomanometers —
Part 2: Clinical investigation of automated
measurement type
TC 122
Packaging
ISO
17351:2013
Packaging — Braille on packaging for
medicinal products
TC 130
Graphic technology
ISO
15397:2014
*Graphic technology — Communication of
graphic paper properties
ISO 83411:2014
ISO 668:2013 Series 1 freight containers —
Classification, dimensions and ratings
*Fire resistance tests — Elements of
building construction
— Part 11: Specific requirements for the
assessment of fire protection to structural
30
TC 131
Fluid power systems
14857:2014
permeance of building materials
ISO 199734:2014
*Pneumatic fluid power — Assessment of
component reliability by testing — Part 4:
Pressure regulators
TC 165
Timber structures
ISO 121221:2014
TC 138
*Timber structures — Determination of
characteristic values — Part 1: Basic
requirements
ISO
16422:2014
*Pipes and joints made of oriented
unplasticized poly(vinyl chloride) (PVC-O)
for the conveyance of water under
pressure — Specifications
ISO 121222:2014
*Timber structures — Determination of
characteristic values — Part 2: Sawn
timber
TC 171
Document management applications
ISO 126533:2014
ISO
Graphical symbols — Safety colours and
7010:2011/Amd safety signs — Registered safety signs —
Amendment 5
5:2014
*Electronic imaging — Test target for
scanning of office documents — Part 3:
Test target for use in lower resolution
applications
TC 172
ISO 207123:2014
*Water safety signs and beach safety flags
— Part 3: Guidance for use
ISO/TS
24348:2014
TC 147
Water quality
*Ophthalmic optics — Spectacle frames —
Method for the simulation of wear and
detection of nickel release from metal and
combination spectacle frames
ISO 173781:2014
Water quality — Determination of arsenic
and antimony — Part 1: Method using
hydride generation atomic fluorescence
spectrometry (HG-AFS)
TC 173
disability
ISO 173782:2014
Water quality — Determination of arsenic
and antimony — Part 2: Method using
hydride generation atomic absorption
spectrometry (HG-AAS)
ISO 168403:2014
Wheelchair seating — Part 3:
Determination of static, impact and
repetitive load strengths for postural
support devices
ISO
13166:2014
Water quality — Uranium isotopes — Test
method using alpha-spectrometry
ISO/TS 16840- Wheelchair seating — Part 11:
11:2014
Determination of perspiration dissipation
characteristics of seat cushions intended
to manage tissue integrity
ISO
17994:2014
Water quality — Requirements for the
comparison of the relative recovery of
microorganisms by two quantitative
methods
ISO 125051:2014
*Skin barrier for ostomy aids — Test
methods — Part 1: Size, surface pH and
water-absorbency
TC 150
TC 176
Quality management and quality
assurance
ISO/TS
17582:2014
*Quality management systems —
Particular requirements for the application
of ISO 9001:2008 for electoral
organizations at all levels of government
TC 145
Graphical symbols
ISO
Non-active surgical implants — Joint
21536:2007/Am replacement implants — Specific
d 1:2014
requirements for knee-joint replacement
implants — Amendment 1
ISO/TR
16379:2014
*Tissue-engineered medical products —
Evaluation of anisotropic structure of
articular cartilage using DT (Diffusion
Tensor)-MR Imaging
ISO
18091:2014
*Quality management systems —
Guidelines for the application of ISO
9001:2008 in local government
TC 156
TC 178
Lifts, escalators and moving walks
ISO
15158:2014
Corrosion of metals and alloys — Method
of measuring the pitting potential for
stainless steels by potentiodynamic
control in sodium chloride solution
ISO 225591:2014
*Safety requirements for lifts (elevators) —
Part 1: Global essential safety
requirements (GESRs)
TC 184
TC 163
ISO
13482:2014
Robots and robotic devices — Safety
requirements for personal care robots
ISO
*Thermal performance in the built
environment — Determination of air
TC 190
Soil quality
31
ISO
13859:2014
ISO
13913:2014
*Soil quality — Determination of polycyclic
aromatic hydrocarbons (PAH) by gas
chromatography (GC) and high
performance liquid chromatography
(HPLC)
*Soil quality — Determination of selected
phthalates using capillary gas
chromatography with mass spectrometric
detection (GC/MS)
10418:2014
Device specialization — International
Normalized Ratio (INR) monitor
ISO/TR 28380- *Health informatics — IHE global
1:2014
standards adoption — Part 1: Process
ISO/TR 28380- *Health informatics — IHE global
2:2014
standards adoption — Part 2: Integration
and content profiles
TC 226
aluminium
ISO
18142:2014
*Carbonaceous materials for the
production of primary aluminium — Baked
carbon bodies — Determination of the
dynamic elasticity modulus by the
resonance method
ISO
18227:2014
*Soil quality — Determination of elemental
composition by X-ray fluorescence
ISO
11267:2014
Soil quality — Inhibition of reproduction of
Collembola (Folsomia candida) by soil
contaminants
TC 197
Hydrogen technologies
TC 229
Nanotechnologies
ISO 146873:2014
*Hydrogen fuel — Product specification —
Part 3: Proton exchange membrane
(PEM) fuel cell applications for stationary
appliances
ISO/TS
13830:2013
Nanotechnologies — Guidance on
voluntary labelling for consumer products
containing manufactured nano-objects
TC 202
Microbeam analysis
ISO/TR
14786:2014
ISO
15932:2013
Microbeam analysis — Analytical electron
microscopy — Vocabulary
Nanotechnologies — Considerations for
the development of chemical
nomenclature for selected nano-objects
TC 206
Fine ceramics
ISO
17161:2014
advanced technical ceramics) — Ceramic
composites — Determination of the
degree of misalignment in uniaxial
mechanical tests
TC 211
ISO
19153:2014
Geospatial Digital Rights Management
Reference Model (GeoDRM RM)
TC 213
ISO 2517870:2014
— Surface texture: Areal — Part 70:
Material measures
TC 215
Health informatics
ISO/IEEE
1107310102:2014
Health informatics — Point-of-care
medical device communication — Part
10102: Nomenclature — Annotated ECG
ISO/IEEE
1107310103:2014
10103: Nomenclature — Implantable
device, cardiac
ISO/IEEE
1107310417:2014
Health informatics — Personal health
device communication — Part 10417:
Device specialization — Glucose meter
ISO/IEEE
11073-
ISO/TS 80004- Nanotechnologies — Vocabulary — Part
8:2013
8: Nanomanufacturing processes
TC 249
Traditional chinese medicine
ISO
17218:2014
*Sterile acupuncture needles for single
use
TC 268
Sustainable development in
communities
ISO/TR
37150:2014
*Smart community infrastructures —
Review of existing activities relevant to
metrics
TMBG
ISO Guide
82:2014
*Guidelines for addressing sustainability in
standards
IULTCS
ISO
11646:2014
Leather — Measurement of area
CASCO
ISO/IEC TS
17027:2014
*Conformity assessment — Vocabulary
related to competence of persons used for
certification of persons
JTC 1
ISO/IEC 29182- *Information technology — Sensor
3:2014
networks: Sensor Network Reference
Architecture (SNRA) — Part 3: Reference
architecture views
32
ISO/IEC/IEEE *Information technology —
8802-1AB:2014 Telecommunications and information
exchange between systems — Local and
metropolitan area networks — Part 1AB:
Station and media access control
connectivity discovery
8802-1AR:2014 Telecommunications and information
metropolitan area networks — Part 1AR:
Secure device identity
8802-1AS:2014 Telecommunications and information
metropolitan area networks — Part 1AS:
Timing and synchronization for timesensitive applications in bridged local area
networks
ISO/IEC 9594- *Information technology — Open Systems
1:2014
Interconnection — The Directory — Part 1:
Overview of concepts, models and
services
2:2014
Models
3:2014
Abstract service definition
4:2014
Procedures for distributed operation
5:2014
Protocol specifications
6:2014
Selected attribute types
7:2014
Selected object classes
8:2014
Public-key and attribute certificate
frameworks
9:2014
Replication
ISO/IEC
25051:2014
*Software engineering — Systems and
software Quality Requirements and
Evaluation (SQuaRE) — Requirements for
quality of Ready to Use Software Product
(RUSP) and instructions for testing
ISO/IEC 18745- *Information technology — Test methods
1:2014
for machine readable travel documents
(MRTD) and associated devices — Part 1:
Physical test methods for passport books
(durability)
ISO/IEC
18025:2014
*Information technology — Environmental
Data Coding Specification (EDCS)
ISO/IEC TR
27016:2014
techniques — Information security
management — Organizational economics
4:2014
techniques — Network security — Part 4:
Securing communications between
networks using security gateways
ISO/IEC
29147:2014
ISO/IEC 24730- *Information technology — Real-time
1:2014
locating systems (RTLS) — Part 1:
Application programming interface (API)
ISO/IEC 24791- *Information technology — Radio
3:2014
frequency identification (RFID) for item
management — Software system
infrastructure — Part 3: Device
management
ISO/IEC 20016- *Information technology for learning,
1:2014
education and training — Language
accessibility and human interface
equivalencies (HIEs) in e-learning
applications — Part 1: Framework and
reference model for semantic
interoperability
ISO/IEC 19794- *Information technology — Biometric data
5:2011/Amd
interchange formats — Part 5: Face image
1:2014
data — Amendment 1: Conformance
testing methodology and clarification of
defects
7:2014
interchange formats — Part 7:
Signature/sign time series data
NORMES CONFIRMEES
ans:
TC 22
Road vehicles
TC 28
33
techniques — Vulnerability disclosure
ISO 19986:2000
(reconfirmed)
ISO 69802:2004
ISO 199899:2000
(reconfirmed)
(reconfirmed)
ISO
17873:2004
(reconfirmed)
TC 30
Measurement of fluid flow in closed
conduits
TC 107
(reconfirmed)
ISO
14918:1998
(reconfirmed)
ISO 51671:2003
TC 108
ISO 51672:2003
(reconfirmed)
(reconfirmed)
ISO 133741:2003
(reconfirmed)
ISO 51673:2003
TC 113
Hydrometry
ISO 51674:2003
(reconfirmed)
TC 51
materials handling
ISO/TS
15768:2000
ISO 127772:2000
(reconfirmed)
ISO 127773:2002
(reconfirmed)
TC 135
(reconfirmed)
ISO/TS
18173:2005
(reconfirmed)
ISO
15629:2002
(reconfirmed)
TC 138
TC 58
Gas cylinders
(reconfirmed)
ISO
11621:1997
(reconfirmed)
ISO
13957:1997
TC 149
Cycles
TC 67
industries
ISO
10230:1990
(reconfirmed)
TC 159
Ergonomics
ISO 110646:2005
(reconfirmed)
disability
ISO 104072:2008
ISO
13533:2001
(reconfirmed)
TC 173
ISO 136283:2000
(reconfirmed)
ISO 105421:2012
TC 180
ISO 1362811:2007
ISO/TR
10217:1989
ISO
14310:2008
ISO 170781:2004
JTC 1
(reconfirmed)
ISO/IEC 117702:2008
ISO 170782:2007
TC 85
Solar energy
ISO/IEC 148881:2008
ISO/IEC 148882:2008
34
JTC 1
ISO/IEC
23988:2007
ISO/IEC 18028- (replaced by ISO/IEC 27033-4:2014)
3:2005
ISO/IEC 197947:2007
NORMES ANNULEES
er
TC 8
ISO/PAS
28004-2:2012
ISO/PAS
28004-3:2012
ISO/PAS
28004-4:2012
TC 34
Food products
ISO 5549:1978 (replaced by ISO 8968-1:2014)
ISO 89682:2001
ISO/TS
17837:2008
TC 37
content resources
ISO
24615:2010
TC 43
Acoustics
ISO 140-4:1998(replaced by ISO 16283-1:2014)
TC 92
Fire safety
ISO/TR
3814:1989
(replaced by ISO/TS 3814:2014)
TC 118
ISO 86621:1988
(replaced by )
TC 147
Water quality
ISO
11969:1996
TC 178
ISO/TS 22559- (replaced by ISO 22559-1:2014)
1:2004
TMBG
IWA 4:2009
(replaced by ISO 18091:2014)
35
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 mars 2014 au 31 mars 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
Nieuwe publicaties
Frans.
TC 4
Rolling bearings
ISO/DIS 104
*Rolling bearings — Thrust bearings —
Boundary dimensions, general plan
TC 8
ISO/DIS
18215
*Ships and marine technology — Vessel
machinery operations in polar waters —
Guidelines
TC 21
fighting
ISO/DIS
14520-12
*Gaseous fire-extinguishing systems —
Physical properties and system design
— Part 12: IG-01 extinguishant
ISO/DIS
14520-13
ISO/DIS
14520-14
ISO/DIS
14520-15
TC 22
Road vehicles
ISO/DIS 3537 *Road vehicles — Safety glazing
materials — Mechanical tests
ISO/DIS 3917 *Road vehicles — Safety glazing
materials — Test methods for resistance
to radiation, high temperature, humidity,
fire and simulated weathering
ISO/DIS 6487 *Road vehicles — Measurement
techniques in impact tests —
36
Instrumentation
ISO/DIS 3006 *Road vehicles — Passenger car wheels
for road use — Test methods
ISO/DIS
6469-4.2
Safety specifications — Part 4: Post
crash electrical safety
ISO/DIS
17409.2
Electrically propelled road vehicles —
Connection to an external electric power
supply — Safety requirements
ISO/DIS
15500-1
*Road vehicles — Compressed natural
gas (CNG) fuel system components —
Part 1: General requirements and
definitions
15500-1:2000/Amd 1:2003)
ISO/DIS
15500-7
Part 7: Gas injector
ISO/DIS
15500-8
Part 8: Pressure indicator
ISO/DIS
15500-10
Part 10: Gas-flow adjuster
ISO/DIS
15500-11
Part 11: Gas/air mixer
ISO/DIS
15500-12
Part 12: Pressure relief valve (PRV)
ISO/DIS
15500-20
Part 20: Rigid fuel line in material other
than stainless steel
TC 23
TC 34
Food products
ISO/DIS
18363-1
*Animal and vegetables fats and oils —
Determination of fatty-acid-bound 3chloropropane-1,2-diol (3-MCPD) and
2,3-epoxi-propane-1-ol (glycidol) —
Differential method using GC/MS — Part
1: Method by GC/MS (Differential
measurement)
TC 35
ISO/DIS
16773-1
*Electrochemical impedance
spectroscopy (EIS) on coated and
uncoated metallic specimens — Part 1:
Terms and definitions
ISO/DIS
16773-2
Collection of data
ISO/DIS
16773-3
Processing and analysis of data from
dummy cells
ISO/DIS
16773-4
Examples of spectra of polymer-coated
specimens
TC 36
Cinematography
ISO/DIS 2939 *Cinematography — Picture image area
on 35 mm motion-picture release prints
— Position and dimensions and
analogue and digital photographic sound
to picture record displacement
ISO/DIS 3600 *Tractors, machinery for agriculture and
forestry, powered lawn and garden
equipment — Operator's manuals
— Content and format
ISO/DIS 6535 *Portable chain-saws — Chain brake
performance
TC 37
content resources
ISO/DIS
24617-7
Semantic annotation framework — Part
7: Spatial information (ISO-Space)
TC 38
Textiles
ISO/DIS
16373-1
*Textiles — Dyestuffs — Part 1: General
principles of testing coloured textiles for
dyestuff identification
ISO/DIS 137
*Wool — Determination of fibre diameter
— Projection microscope method
ISO/DIS 1136 *Wool — Determination of mean
37
diameter of fibres — Air permeability
method
TC 68
Financial services
ISO/DIS
9564-4
*Financial services — Personal
Identification Number (PIN) management
and security — Part 4: Requirements for
PIN handling in eCommerce for Payment
Transactions
(Revision of ISO/TR 9564-4:2004)
ISO/DIS
17608
*Textiles — Bare elastane yarns —
Determination of resistance to
chlorinated water (swimming-pool water)
TC 44
ISO/DIS
18278-2
*Resistance welding — Weldability —
Part 2: Evaluation procedures for
weldability in spot welding
ISO/DIS 4217 *Codes for the representation of
currencies
4217:2008/Cor 1:2008)
TC 45
TC 70
ISO/DIS
19050
*Rubber- raw, vulcanised, thermoplastic
— Determination of metal content by
ICP-OES
ISO/DIS
7967-10
engines — Vocabulary of components
and systems — Part 10: Ignition systems
ISO/DIS
23794
Abrasion testing — Guidance
ISO/DIS
7967-11
and systems — Part 11: Fuel systems
ISO/DIS
7967-12
and systems — Part 12: Exhaust
emission control systems
TC 72
ISO/DIS 2302 *Isobutene-isoprene rubber (IIR) —
Evaluation procedures
ISO/DIS 4097 *Rubber, ethylene-propylene-diene
(EPDM) — Evaluation procedure
4097:2007/WD Amd 1)
ISO 93*Textile machinery and accessories —
1:2006/DAmd Cylindrical sliver cans — Part 1: Main
1
dimensions — Amendment 1
ISO/DIS 4659 *Styrene-butadiene rubber (carbon black
or carbon black and oil masterbatches)
— Evaluation procedure
ISO 93*Textile machinery and accessories —
2:2006/DAmd Cylindrical sliver cans — Part 2: Spring
1
bottoms — Amendment 1
ISO/DIS 7663 *Halogenated isobutene-isoprene rubber
(BIIR and CIIR) — Evaluation
procedures
TC 79
ISO/DIS
16374
*Evaluation method for cleanness of
magnesium and magnesium alloy ingots
TC 61
Plastics
ISO/DIS
15106-5
*Plastics — Film and sheeting —
Determination of water vapour
transmission rate — Part 5: Presssure
sensor method
ISO/DIS
6361-2
*Wrought aluminium and aluminium
alloys — Sheets, strips and plates —
Part 2: Mechanical properties
ISO/DIS
6361-3
Part 3: Strips: Tolerances on shape and
dimensions
ISO/DIS
6361-4
Part 4: Sheets and plates: Tolerances on
shape and dimensions
ISO/DIS
6362-2
alloys — Extruded rods/bars, tubes and
profiles — Part 2: Mechanical properties
ISO/DIS
15106-6
transmission rate — Part 6: Atmospheric
pressure ionization mass spectrometer
method
ISO/DIS
15106-7
transmission rate — Part 7: Calcium
corrosion method
ISO/DIS
23560
*Woven polypropylene sacks for bulk
packaging of foodstuffs
38
Based Hardmetals
ISO/DIS
6362-7
alloys — Extruded rods/bars, tubes and
profiles — Part 7: Chemical composition
TC 83
Sports and other recreational facilities
and equipment
ISO/DIS 8783 *Alpine skis — Guidelines for conducting
slope performance tests
TC 84
Devices for administration of
medicinal products and intravascular
catheters
ISO/DIS
10555-6.2
*Intravascular catheters — Sterile and
single-use catheters — Part 6:
Subcutaneous implanted ports
ISO/DIS
4499-4
*Hardmetals — Metallographic
determination of microstructure — Part 4:
Characterisation of Porosity, Carbon
Defects and Eta-phase content
TC 121
equipment
ISO/DIS 5361 *Anaesthetic and respiratory equipment
— Tracheal tubes and connectors
ISO/DIS 5364 *Anaesthetic and respiratory equipment
— Oropharyngeal airways
ISO/DIS
14408
*Tracheal tubes designed for laser
surgery — Requirements for marking
and accompanying information
TC 85
ISO/DIS
16638-1
*Radiological protection - Monitoring and
internal dosimetry for specific materials
— Part 1: Uranium
TC 122
Packaging
ISO/DIS
16644-1
*Measurement of activity in nuclear
medicine — Part 1: Grammacamera
planar image
ISO/DIS
21067
*Packaging — Vocabulary
TC 127
Earth-moving machinery
TC 104
Freight containers
ISO/DIS
13031.2
*Earth-moving machinery — Quick
couplers — Safety
ISO/DIS
18185-3
*Freight containers — Electronic seals —
Part 3: Environmental characteristics
TC 130
Graphic technology
TC 106
Dentistry
ISO/DIS
7494-2.2
*Dentistry — Dental units — Part 2: Air,
water, suction and wastewater system
(Revision of ISO 11144:1995, ISO 74942:2003)
ISO/DIS
10650
ISO/DIS 5776 *Graphic technology — Symbols for text
proof correction
TC 131
Fluid power systems
ISO/DIS 4393 *Fluid power systems and components
— Cylinders — Basic series of piston
strokes
*Dentistry — Powered polymerization
activators
10650-2:2007)
ISO/DIS
6020-2
TC 107
ISO/DIS
18555
*Metallic and other inorganic coatings —
Determination of thermal conductivity of
thermal barrier coatings
TC 113
Hydrometry
ISO/DIS
26906
*Hydrometry — Fishpasses at flow
measurement structures
TC 119
Powder metallurgy
ISO/DIS
4499-3
*Hardmetals — Metallographic
determination of microstructure — Part 3:
Measurement of microstructural features
in Ti (C, N) and WC/Cubic Carbide
*Hydraulic fluid power — Mounting
dimensions for single rod cylinders, 16
MPa (160 bar) series — Part 2: Compact
series
ISO/DIS 6432 *Pneumatic fluid power — Single rod
cylinders, 1 000 kPa (10 bar) series,
bores from 8 mm to 25 mm — Basic and
mounting dimensions
TC 138
ISO/DIS
18851
*Plastics piping systems — Glassreinforced thermosetting plastics (GRP)
pipes and fittings — Test method to
39
prove the structural design of fittings
TC 172
TC 147
Water quality
ISO/DIS
17690
*Water quality - Determination of
available free cyanide (pH 6) using flow
injection analysis (FIA), gas-diffusion and
amperometric detection
ISO/DIS
10110-5.2
*Optics and photonics — Preparation of
drawings for optical elements and
systems — Part 5: Surface form
tolerances
TC 154
documents in commerce, industry
and administration
ISO/DIS
10110-19.2
*Optics and photonics — Preparation of
drawings for optical elements and
systems — Part 19: General description
of surfaces and components
ISO/DIS
14533-1
*Processes, data elements and
administration — Long term signature
profiles — Part 1: Long term signature
profiles for CMS Advanced Electronic
Signatures (CAdES)
ISO/DIS
14999-4.2
*Optics and photonics — Interferometric
measurement of optical elements and
optical systems — Part 4: Interpretation
and evaluation of tolerances specified in
ISO 10110
TC 156
ISO/DIS
8600-2
ISO/DIS
18069
Method for determination of the uniform
corrosion rate of stainless steels and
nickel based alloys in aqueous solutions
*Endoscopes - Medical endoscopes and
endotherapy devices — Part 2: Particular
requirements for rigid bronchoscopes
TC 181
Safety of toys
ISO/DIS
8124-7
Safety of toys — Part 7: Finger paints —
TC 184
ISO/DIS
15746-1
Integration of advanced process control
and optimization capabilities for
manufaruing systems — Part 1:
Framework and functional model
TC 188
Small craft
ISO/DIS
9094.2
*Small craft — Fire protection
TC 201
ISO/DIS
17560
*Surface chemical analysis —
Secondary-ion mass spectrometry —
Method for depth profiling of boron in
silicon
TC 204
ISO/DIS
18070
Crevice corrosion formers with disc
springs for flat specimens or tubes of
stainless steels in corrosive solutions
ISO/DIS
18089
Determination of the critical crevice
temperature (CCT) for stainless steels
under potentiostatic control
TC 157
ISO/DIS
29943-1
*Condoms — Guidance on clinical
studies — Part 1: Male condoms, clinical
function studies based on self-reports
ISO/DIS
29943-2
*Condoms — Guidance on clinical
studies — Part 2: Female condoms,
clinical function studies based on selfreports
TC 164
ISO/DIS
7500-1.2
*Metallic materials — Verification of
static uniaxial testing machines — Part 1:
Tension/compression testing machines
— Verification and calibration of the
force-measuring system
TC 168
Prosthetics and orthotics
ISO/DIS
16955.2
*Prosthetics — Quantification of physical
parameters of ankle foot devices and
foot units
*Intelligent transport systems —
ISO
21210:2012/D Communications access for land mobiles
Amd 1
(CALM) — IPv6 Networking —
Amendment 1
ISO
21218:2013/D Communications access for land mobiles
Amd 1
(CALM) — Access technology support —
Amendment 1
ISO 24102*Intelligent transport systems —
1:2013/DAmd Communications access for land mobiles
40
1
(CALM) — ITS station management —
Part 1: Local management —
Amendment 1
1
Part 3: Service access points —
Amendment 1
1
Part 4: Station-internal management
communications — Amendment 1
1
Part 5: Fast service advertisement
protocol (FSAP) — Amendment 1
1:2013/DAmd Communication access for land mobiles
1
(CALM) — Non-IP networking — Part 1:
Fast networking & transport layer
protocol (FNTP) — Amendment 1
Floor coverings
ISO/DIS
10361
*Textile floor coverings — Production of
changes in appearance by means of
Vettermann drum and hexapod tumbler
tester
TC 227
Springs
ISO/DIS
18137-1
*Leaf springs — Part 1: Technical
requirements and test methods
TC 234
Fisheries and aquaculture
ISO/DIS
18537
*Traceability of crustacean products —
recorded in captured crustacean
distribution chains
ISO/DIS
18538
*Traceability of molluscan products —
recorded in farmed molluscan distribution
chains
ISO/DIS
18539
*Traceability of molluscan products —
recorded in captured molluscan
distribution chains
TC 261
Additive manufacturing
ISO/DIS
*Additive manufacturing — General
principles — Part 2: Overview of process
categories and feedstock
JTC 1
ISO/IEC DIS
19678
*Information Technology — BIOS
Protections
ISO/IEC DIS
25185-1.2
Identification cards — Integrated circuit
card authentication protocols — Part 1:
Protocol for Lightweight Authentication of
Identity
ISO/IEC/IEEE *Systems and software engineering —
DIS 15288
System life cycle processes
ISO/IEC DIS
16350
*Systems and Software Engineering —
Application Management
(Revision of ISO/IEC DIS 26500,
ISO/IEC DIS 16350)
DIS 23026
Engineering and management of
websites for systems, software, and
services information
DIS 26531
Content management for product lifecycle, user and service management
documentation
2:2013/DAmd Communication access for land mobiles
1
(CALM) — Non-IP networking — Part 2:
Legacy system support — Amendment 1
TC 219
17296-2
ISO/IEC DIS
29155-3
*Systems and software engineering —
Information technology project
performance benchmarking framework
— Part 3: Guidance for reporting
ISO/IEC DIS
19776-1
*Information technology — Computer
graphics, image processing and
environmental data representation —
Extensible 3D (X3D) encodings — Part
1: Extensible Markup Language (XML)
encoding
ISO/IEC DIS
19776-2
2: Classic VRML encoding
ISO/IEC DIS
11770-3
techniques — Key management — Part
3: Mechanisms using asymmetric
techniques
ISO/IEC 11770-3:2008/Cor 1:2009)
ISO/IEC DIS
24711
*Method for the determination of ink
cartridge yield for colour inkjet printers
and multi-function devices that contain
printer components
41
Part 12: Metamodel for information
model registration
ISO/IEC DIS
29102
*Information technology — Office
equipment — Method for the
determination of ink cartridge photo yield
for colour printing with inkjet printers and
multi-function devices that contain inkjet
printer components
ISO/IEC
154441:2004/DAmd
8
image coding system: Core coding
system — Part 1: — Amendment 8:
Profiles for an interoperable master
format IMF
ISO/IEC
230082:2013/DAmd
3
High efficiency video coding —
Amendment 3
ISO/IEC DIS
15426-2.2
techniques — Bar code verifier
conformance specification — Part 2:
Two-dimensional symbols
ISO/IEC 15426-2:2005/Cor 1:2008)
ISO/IEC DIS
19762
identification and data capture (AIDC)
techniques — Harmonized vocabulary
ISO/IEC 19762-2:2008, ISO/IEC 197623:2008, ISO/IEC 19762-4:2008, ISO/IEC
19762-5:2008)
ISO/IEC DIS
13250-5.2
*Information technology — Topic Maps
— Part 5: Reference model
ISO/IEC DIS
19788-8
learning resources — Part 8: Data
elements for MLR records
ISO/IEC DIS
19788-9
learning resources — Part 9: Data
elements for Persons
ISO/IEC DIS
20006-2
*Information technology for learning,
education and training — Information
model for competency — Part 2:
Proficiency level information model
ISO/IEC DIS
29120-1.3
Information technology — Machine
readable test data for biometric testing
and reporting — Part 1: Test reports
ISO/IEC DIS
29794-6.2
Information technology — Biometric
sample quality — Part 6: Iris image data
PROJETS FINALS
er
TC 6
ISO/FDIS
5631-2
*Information technology — Metadata
registries (MDR) — Part 5: Naming
principles
*Paper and board — Determination of
colour by diffuse reflectance — Part 2:
Outdoor daylight conditions (D65/10
degrees)
ISO/FDIS
5631-3
*Information technology — Metamodel
framework for interoperability (MFI) —
Part 5: Metamodel for process model
registration
*Paper and board — Determination of
Indoor illumination conditions (D50/2
degrees)
TC 8
ISO/IEC DIS
19763-6
Part 6: Registry Summary
ISO/FDIS 8728 *Ships and marine technology — Marine
gyro-compasses
ISO/IEC DIS
19763-10
Part 10: MFI Core model and basic
mapping
TC 17
ISO/IEC DIS
19763-12
ISO/IEC DIS
29167-17
techniques — Part 17: Air interface for
security services crypto suite cryptoGPS
ISO/IEC DIS
11179-5
ISO/IEC DIS
19763-5
Steel
ISO/FDIS 683- Heat-treatable steels, alloy steels and
4
free-cutting steels — Part 4: Free-cutting
steels
42
ISO/FDIS 4999 *Continuous hot-dip terne (lead alloy)
coated cold-reduced carbon steel sheet of
commercial, drawing and structural
qualities
TC 22
TC 24
sieving
ISO/FDIS
13099-3
*Colloidal systems — Methods for zeta
potential determination — Part 3: Acoustic
methods
TC 28
ISO/FDIS
17315
*Ethanol — Determination of total acidity
by potenciometric titration
TC 29
Small tools
ISO/FDIS 603- *Bonded abrasive products — Dimensions
17
— Part 17: Spindle mounted wheels
ISO/FDIS 242 *Carbide tips for brazing on turning tools
ISO/FDIS 243 *Turning tools with carbide tips — External
tools
ISO/FDIS 514 *Turning tools with carbide tips — Internal
tools
ISO/FDIS
9361-1
*Indexable inserts for cutting tools —
Ceramic inserts with rounded corners —
Part 1: Dimensions of inserts without fixing
hole
TC 33
Refractories
ISO/FDIS
10081-4
*Classification of dense shaped refractory
products — Part 4: Special products
TC 34
Food products
ISO/FDIS
12228-1
*Determination of individual and total
sterols contents — Gas chromatographic
method — Part 1: Animal and vegetable
fats and oils
*Graphic notations for concept modeling in
terminology work and its relationship with
UML — Part 1: Guidelines for using UML
and mind-mapping notation in terminology
work
(Revision of ISO/TR 24156:2008)
TC 38
Textiles
ISO/FDIS
16533
*Textiles — Measurement of exothermic
and endothermic properties of textiles
under humidity change
ISO/FDIS 105- *Textiles — Tests for colour fastness —
B02
Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test
(Revision of ISO 105-B02:2013)
ISO/FDIS
12945-3
*Textiles- Determination of the fabric
propensity to surface pilling, fuzzing or
matting — Part 3: Random tumble pilling
method
TC 39
Machine tools
ISO/FDIS
10791-6
*Test conditions for machining centres —
Part 6: Accuracy of speeds and
interpolations
10791-6:1998/Cor 1:2004)
TC 44
ISO/FDIS 9453 *Soft solder alloys — Chemical
compositions and forms
TC 45
ISO/FDIS
27126
*Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies
for the transfer of hydrocarbons, solvents
and chemicals — Specification
ISO/FDIS 3385 *Flexible cellular polymeric materials —
Determination of fatigue by constant-load
pounding
TC 58
Gas cylinders
ISO/FDIS
10297
*Gas cylinders — Cylinder valves —
Specification and type testing
ISO/FDIS
14246.2
*Gas cylinders — Cylinder valves —
Manufacturing tests and examinations
TC 59
43
ISO/FDIS 8030 *Rubber and plastics hoses — Method of
test for flammability
ISO/FDIS 4618 *Paints and varnishes — Terms and
definitions
TC 37
ISO/FDIS
24156-1
Road vehicles
ISO
*Road vehicles — Symbols for controls,
2575:2010/FDA indicators and tell-tales — Amendment 3
md 3
TC 35
content resources
ISO/FDIS
11617
TC 61
*Buildings and civil engineering works —
Sealants — Determination of changes in
adhesion, cohesion and appearance of
elastic weatherproofing sealants after
exposure of statically cured specimens to
artificial weathering and mechanical
cycling
Calibration of seismometers with high
accuracy using acceleration of gravity
TC 113
Hydrometry
ISO/FDIS
11657
*Hydrometry — Suspended sediment in
streams and canals — Determination of
concentration by surrogate techniques
TC 114
Horology
ISO/FDIS
10552
*Timekeeping instruments — Crowns and
sealed tubes — Designs and dimensions
TC 119
Powder metallurgy
Plastics
ISO/FDIS 3167 *Plastics — Multipurpose test specimens
ISO/FDIS
11403-1
16063-42
*Plastics — Acquisition and presentation
of comparable multipoint data — Part 1:
Mechanical properties
ISO/FDIS
11357-4
*Plastics — Differential scanning
Determination of specific heat capacity
ISO/FDIS
11358-1
polymers — Part 1: General principles
ISO/FDIS 4490 *Metallic powders — Determination of flow
rate by means of a calibrated funnel (Hall
flowmeter)
TC 121
IEC/FDIS
60601-1-12
Medical Electrical Equipment — Part 1-12:
General requirements for basic safety and
essential performance - Collateral
Standard: Requirements for medical
electrical equipment and medical electrical
systems used in the emergency medical
services environment
TC 131
Fluid power systems
ISO/FDIS 844 *Rigid cellular plastics — Determination of
compression properties
ISO/FDIS 4895 *Plastics — Liquid epoxy resins —
Determination of tendency to crystallize
TC 69
ISO/FDIS
7241-1
ISO/FDIS
16336
*Applications of statistical and related
methods to new technology and product
development process — Robust
parameter design (RPD)
*Hydraulic fluid power — Quick-action
couplings — Part 1: Dimensions and
requirements
ISO/FDIS
6358-3
*Pneumatic fluid power — Determination
of flow-rate characteristics of components
using compressible fluids — Part 3:
Method for calculating steady-state flowrate characteristics of systems
(Revision of ISO 6358:1989, ISO/CD
6358-5)
TC 135
TC 83
and equipment
ISO/FDIS 9462 *Alpine ski-bindings — Requirements and
test methods
9462:2006/Amd 1:2009)
TC 106
Dentistry
ISO/FDIS
17405
ISO/FDIS
24234
*Dentistry — Dental amalgam
24234:2004/Amd 1:2011)
*Non-destructive testing — Ultrasonic
testing — Technique of testing claddings
produced by welding, rolling and explosion
TC 146
Air quality
ISO/FDIS
16443
Dentistry — Vocabulary of oral
implantology
ISO/FDIS
14385-1
*Stationary source emissions — Green
house gases — Part 1: Calibration of
automated measuring systems
ISO/FDIS
16635-2
*Dentistry — Dental rubber dam
instruments — Part 2: Clamp forceps
ISO/FDIS
14385-2
TC 108
*Stationary source emissions — Green
house gases — Part 2: Ongoing quality
control of automated measuring systems
ISO/FDIS
ISO/FDIS
16000-32
*Indoor air — Part 32: Investigation of
buildings for the occurrence of pollutants
44
Particular requirements — Part 6:
Thermoelectric flame supervision controls
TC 147
Water quality
ISO/FDIS
17289
*Water quality — Determination of
dissolved oxygen — Optical sensor
method
ISO/FDIS
5667-6
*Water quality — Sampling — Part 6:
Guidance on sampling of rivers and
streams
TC 149
Cycles
ISO/FDIS
4210-1
*Cycles — Safety requirements for
bicycles — Part 1: Terms and definitions
ISO/FDIS
4210-2
bicycles — Part 2: Requirements for city
and trekking, young adult, mountain and
racing bicycles
ISO/FDIS
4210-3
bicycles — Part 3: Common test methods
ISO/FDIS
4210-4
bicycles — Part 4: Braking test methods
ISO/FDIS
4210-5
bicycles — Part 5: Steering test methods
ISO/FDIS
4210-6
bicycles — Part 6: Frame and fork test
methods
ISO/FDIS
4210-7
bicycles — Part 7: Wheels and rims test
methods
ISO/FDIS
4210-8
TC 163
ISO/FDIS
9869-1
*Thermal insulation — Building elements
— In-situ measurement of thermal
resistance and thermal transmittance —
Part 1: Heat flow meter method
TC 164
ISO/FDIS
16842
*Metallic materials — Sheet and strip —
Biaxial tensile testing method using
cruciform specimen
TC 172
ISO/FDIS
12858-1
Ancillary devices for geodetic instruments
— Part 1: Invar levelling staffs
ISO/FDIS
11978
*Ophthalmic optics — Contact lenses and
contact lens care products — Labelling
ISO/FDIS
11979-6
*Ophthalmic implants — Intraocular lenses
— Part 6: Shelf-life and transport stability
testing
ISO/FDIS
14730
bicycles — Part 8: Pedal and drive system
test methods
products — Antimicrobial preservative
efficacy testing and guidance on
determining discard date
TC 176
ISO/FDIS
4210-9
bicycles — Part 9: Saddles and seat-post
test methods
assurance
ISO/FDIS
10002
TC 157
*Quality management — Customer
satisfaction — Guidelines for complaints
handling in organizations
10002:2004/Cor 1:2009)
TC 181
Safety of toys
ISO/FDIS 4074 *Natural rubber latex male condoms —
4074:2002/Cor 1:2003, ISO
4074:2002/Cor 2:2008)
ISO 8124*Safety of toys — Part 1: Safety aspects
1:2012/FDAmd related to mechanical and physical
1
properties — Amendment 1: Projectiles,
rotors and propellers
ISO/FDIS 8009 *Mechanical contraceptives — Reusable
natural and silicone rubber contraceptive
diaphragms — Requirements and tests
8009:2004/Amd 1:2012)
ISO 8124*Safety of toys — Part 1: Safety aspects
1:2012/FDAmd related to mechanical and physical
2
properties — Amendment 2: Impaction
and impalement hazards
TC 161
ISO/FDIS
23551-6
ISO/FDIS
8124-6
45
*Safety of toys — Part 6: Toys and
children's products —
Determination of certain phthalate esters
in toys and children's products
TC 188
Small craft
ISO/FDIS
6185-3
*Inflatable boats — Part 3: Boats with a
hull length less than 8 m with a motor
rating of 15 kW and greater
TC 189
Ceramic tile
ISO/FDIS
10545-4
modulus of rupture and breaking strength
TC 193
Natural gas
ISO/FDIS
6974-5
*Natural gas — Determination of
composition and associated uncertainty by
gas chromatography — Part 5: Isothermal
method for nitrogen, carbon dioxide, C1 to
C5 hydrocarbons and C6+ hydrocarbons
TC 195
equipment
ISO/FDIS
21573-1
equipment — Concrete pumps — Part 1:
Terminology and commercial
specifications
TC 198
ISO/FDIS
11135
*Sterilization of health-care products —
Ethylene oxide - Requirements for the
control of a sterilization process for
medical devices
(Revision of ISO 11135-1:2007, ISO/TS
11135-2:2008)
ISO 11607*Packaging for terminally sterilized
1:2006/FDAmd medical devices — Part 1: Requirements
1
for materials, sterile barrier systems and
packaging systems — Amendment 1
ISO 11607*Packaging for terminally sterilized
2:2006/FDAmd medical devices — Part 2: Validation
1
requirements for forming, sealing and
assembly processes — Amendment 1
ISO 15883*Washer-disinfectors — Part 1: General
1:2006/FDAmd requirements, terms and definitions and
1
tests — Amendment 1
TC 211
ISO/FDIS
19101-1
*Geographic information — Reference
model — Part 1: Fundamentals
TC 215
Health informatics
ISO/FDIS
22600-3
3: Implementations
TC 217
Cosmetics
ISO/FDIS
15819
*Cosmetics — Analytical methods —
Nitrosamines: Detection and determination
of N-nitrosodiethanolamine (NDELA) in
cosmetics by HPLC-MS-MS
TC 219
Floor coverings
ISO/FDIS
11856
*Textile floor coverings — Test methods
for the determination of fibre bind using a
Modified Martindale Machine
TC 226
aluminium
ISO/FDIS
10143
production of aluminium — Calcined coke
for electrodes — Determination of the
electrical resistivity of granules
ISO/FDIS
18515
production of aluminium — Cathode
blocks and baked anodes —
Determination of compressive strength
TC 238
Solid biofuels
ISO/FDIS
16559
*Solid biofuels — Terminology, definitions
and descriptions
TC 242
Energy Management
ISO/FDIS
50002
*Energy audits — Requirements with
guidance for use
JTC 1
ISO/IEC FDIS Information technology — Vocabulary
2382
(Revision of ISO/IEC 2382-1:1993, ISO
2382-2:1976, ISO 2382-3:1987, ISO
2382-6:1987, ISO/IEC 2382-7:2000,
ISO/IEC 2382-8:1998, ISO 2382-12:1988,
2382-16:1996, ISO 2382-19:1989,
ISO/IEC 2382-20:1990, ISO 238221:1985, ISO/IEC 2382-23:1994, ISO/IEC
2382-24:1995, ISO/IEC 2382-25:1992,
2382-29:1999, ISO/IEC 2382-9:1995,
2382-18:1999, ISO/IEC 2382-4:1999,
ISO/IEC 2382-5:1999, ISO/IEC 238217:1999, ISO/IEC 2382-37:2012)
ISO/IEC FDIS *Information technology —
46
24771
Telecommunications and information
exchange between systems — MAC/PHY
standard for ad hoc wireless network to
support QoS in an industrial work
environment
ISO/IEC FDIS *Information technology — Security
27036-2
techniques — Information security for
supplier relationships — Part 2:
Requirements
ISO/IEC 14496-*Information technology — Coding of
4:2004/FDAmd audio-visual objects — Part 4:
41
Conformance testing — Amendment 41:
Conformance testing of MVC plus depth
extension of AVC
ISO/IEC FDIS *Information technology — MPEG
23001-4
systems technologies — Part 4: Codec
configuration representation
ISO/IEC FDIS *Information technology — Automatic
29167-11
identification and data capture techniques
— Part 11: Air interface for security
services — Crypto suite PRESENT-80
ISO/IEC FDIS *Information technology for learning,
20006-1
Competency general framework and
information model
ISO/IEC 19794-*Information technology — Biometric data
11:2013/FDAm interchange formats — Part 11:
d1
Signature/sign processed dynamic data —
Amendment 1: Conformance test
assertions
NORMES PUBLIEES
er
Nouvelles Normes internationales publiées entre le 1 mars
2014 et le 31 mars 2014.
anglais seulement
COPOLCO
TC 6
ISO
14453:2014
Pulps — Determination of acetone-soluble
matter
ISO 160651:2014
*Pulps — Determination of fibre length by
automated optical analysis — Part 1:
Polarized light method
ISO 126253:2014
Tissue paper and tissue products — Part
3: Determination of thickness, bulking
thickness and apparent bulk density and
bulk
TC 8
ISO
19292:2014
Lifesaving and fire protection — Point-type
resettable flame detectors for ships
TC 10
ISO
11540:2014
*Writing and marking instruments —
Specification for caps to reduce the risk of
asphyxiation
TC 17
Steel
ISO 6932:2014 *Cold-reduced carbon steel strip with a
maximum carbon content of 0,25 %
TC 20
ISO
16126:2014
*Space systems — Assessment of
survivability of unmanned spacecraft
against space debris and meteoroid
impacts to ensure successful post-mission
disposal
TC 22
Road vehicles
ISO 151182:2014
*Road vehicles — Vehicle-to-Grid
Communication Interface — Part 2:
Network and application protocol
requirements
ISO 5011:2014 *Inlet air cleaning equipment for internal
combustion engines and compressors —
Performance testing
TC 23
and forestry
ISO 500-1:2014Agricultural tractors — Rear-mounted
power take-off types 1, 2, 3 and 4 — Part
1: General specifications, safety
requirements, dimensions for master
shield and clearance zone
ISO/IEC Guide *Safety aspects — Guidelines for their
51:2014
inclusion in standards
PC 251
Asset management
ISO
55000:2014
ISO 500-3:2014Agricultural tractors — Rear-mounted
power take-off types 1, 2, 3 and 4 — Part
3: Main PTO dimensions and spline
dimensions, location of PTO
ISO
55002:2014
*Asset management — Management
of ISO 55001
TC 24
47
sieving
ISO
12154:2014
*Determination of density by volumetric
displacement — Skeleton density by gas
pycnometry
ISO 124:2014 Latex, rubber — Determination of total
solids content
TC 29
Small tools
ISO 119013:2014
Tools for pressing — Gas springs — Part
3: Gas spring with increased spring force
and compact built height
ISO 119014:2014
Tools for pressing — Gas springs — Part
4: Gas springs with increased spring force
and same built height
TC 33
Refractories
ISO
16835:2014
*Refractory products — Determination of
thermal expansion
TC 37
content resources
ISO/TS 24617- *Language resource management —
5:2014
Semantic annotation framework (SemAF)
— Part 5: Discourse structure (SemAFDS)
TC 46
ISO/TR
18128:2014
*Information and documentation — Risk
assessment for records processes and
systems
TC 59
ISO 67071:2014
Vocabulary — Part 1: General terms
ISO 67072:2014
Vocabulary — Part 2: Contract terms
ISO/TS
12720:2014
*Sustainability in buildings and civil
engineering works — Guidelines on the
application of the general principles in ISO
15392
TC 60
Gears
ISO 103001:2014
*Calculation of load capacity of bevel
gears — Part 1: Introduction and general
influence factors
ISO 103002:2014
gears — Part 2: Calculation of surface
durability (pitting)
TC 38
Textiles
ISO 172991:2014
property — Part 1: General principle
ISO 172992:2014
property — Part 2: Detector tube method
ISO 103003:2014
ISO 172993:2014
property — Part 3: Gas chromatography
method
gears — Part 3: Calculation of tooth root
strength
TC 61
Plastics
ISO 139351:2014
Textiles — Seam tensile properties of
fabrics and made-up textile articles — Part
1: Determination of maximum force to
seam rupture using the strip method
ISO
11443:2014
*Plastics — Determination of the fluidity of
plastics using capillary and slit-die
rheometers
ISO 128561:2014
*Plastics — Plastic railway sleepers for
railway applications (railroad ties) — Part
1: Material characteristics
TC 67
industries
ISO
13085:2014
Aluminium alloy pipe for use as tubing for
wells
ISO 135036:2014
Completion fluids and materials — Part 6:
Procedure for measuring leakoff of
completion fluids under dynamic
conditions
TC 69
ISO 78701:2014
Control charts — Part 1: General
guidelines
TC 91
ISO 139352:2014
seam rupture using the grab method
TC 43
Acoustics
ISO 162831:2014
Acoustics — Field measurement of sound
insulation in buildings and of building
elements — Part 1: Airborne sound
insulation
TC 45
ISO 8331:2014 Rubber and plastics hoses and hose
assemblies — Guidelines for selection,
storage, use and maintenance
ISO
18752:2014
*Rubber hoses and hose assemblies —
Wire- or textile-reinforced single-pressure
types for hydraulic applications —
Specification
48
newsprint
ISO 172931:2014
*Surface active agents — Determination of
chloroacetic acid (chloroacetate) in
surfactants — Part 1: HPLC method
TC 138
ISO 172932:2014
*Surface active agents — Determination of
chloroacetic acid (chloroacetate) in
surfactants — Part 2: Ionic
ISO 164861:2012/Amd
1:2014
TC 96
Cranes
gaseous fuels - Unplasticized polyamide
and mechanical jointing — Part 1: General
— Amendment 1
ISO 164862:2012/Amd
1:2014
and mechanical jointing — Part 2: Pipes
— Amendment 1
ISO 164863:2012/Amd
1:2014
and mechanical jointing — Part 3: Fittings
— Amendment 1
ISO
21307:2011
*Plastics pipes and fittings — Butt fusion
jointing procedures for polyethylene (PE)
pipes and fittings used in the construction
of gas and water distribution systems
ISO
10952:2014
*Plastics piping systems — Glassreinforced thermosetting plastics (GRP)
pipes and fittings — Determination of the
resistance to chemical attack for the inside
of a section in a deflected condition
TC 145
Graphical symbols
ISO 91861:2014
Graphical symbols — Test methods —
Part 1: Method for testing
comprehensibility
ISO 4305:2014 Mobile cranes — Determination of stability
ISO 93743:2014
*Cranes — Information to be provided for
enquiries, orders, offers and supply —
Part 3: Tower cranes
TC 98
Bases for design of structures
ISO/TR
12930:2014
*Seismic design examples based on ISO
23469
TC 102
Iron ore and direct reduced iron
ISO
16742:2014
*Iron ores — Sampling of slurries
TC 106
Dentistry
ISO/TS
17988:2014
Dentistry — Corrosion test methods for
dental amalgam
TC 108
ISO 184313:2014
*Mechanical vibration and shock — Signal
processing — Part 3: Methods of timefrequency analysis
ISO 184367:2014
— Part 7: Thermography
TC 117
Fans
ISO 273272:2014
*Fans — Air curtain units — Part 2:
Laboratory methods of testing for sound
power
TC 121
ISO
Graphical symbols — Public information
7001:2007/Amd symbols — Amendment 1 — Technical
1:2013/Cor
Corrigendum 1
1:2014
TC 150
ISO
11663:2014
*Quality of dialysis fluid for haemodialysis
and related therapies
ISO
16571:2014
*Systems for evacuation of plume
generated by medical devices
ISO
13958:2014
*Concentrates for haemodialysis and
related therapies
TC 122
Packaging
ISO
13959:2014
*Water for haemodialysis and related
therapies
ISO
23500:2014
*Guidance for the preparation and quality
management of fluids for haemodialysis
and related therapies
ISO
26722:2014
*Water treatment equipment for
haemodialysis applications and related
therapies
TC 159
Ergonomics
ISO/TR
*Ergonomics — Application document for
ISO
Packaging — Transport packaging for
13274:2013/Co dangerous goods — Plastics compatibility
r 1:2014
testing for packaging and IBCs —
Technical Corrigendum 1
TC 130
Graphic technology
ISO 126473:2013
*Graphic technology — Process control for
the production of half-tone colour
separations, proofs and production prints
— Part 3: Coldset offset lithography on
49
International Standards on manual
handling (ISO 11228-1, ISO 11228-2 and
ISO 11228-3) and evaluation of static
working postures (ISO 11226)
20302:2014
Numbering system and registration
procedure for issuer identifiers
TC 228
ISO
14785:2014
Tourist information offices — Tourist
information and reception services —
Requirements
ISO 8494:2013 Metallic materials — Tube — Flanging test
ISO
21103:2014
Adventure tourism — Information for
participants
ISO 8495:2013 Metallic materials — Tube — Ringexpanding test
ISO 248011:2014
Recreational diving services —
Requirements for the training of
recreational scuba divers — Part 1: Level
1 — Supervised diver
ISO 248012:2014
2 — Autonomous diver
12295:2014
TC 164
ISO 8492:2013 Metallic materials — Tube — Flattening
test
ISO 8496:2013 Metallic materials — Tube — Ring tensile
test
ISO
18265:2013
Metallic materials — Conversion of
hardness values
TC 172
ISO 86004:2014
*Endoscopes — Medical endoscopes and
endotherapy devices — Part 4:
Determination of maximum width of
insertion portion
ISO 248013:2014
3 — Dive leader
TC 204
ISO 171851:2014
*Intelligent transport systems — Public
transport user information — Part 1:
Standards framework for public
information systems
ISO 248021:2014
Requirements for the training of scuba
instructors — Part 1: Level 1
ISO 248022:2014
Requirements for the training of scuba
instructors — Part 2: Level 2
TC 229
Nanotechnologies
ISO
21217:2014
Communications access for land mobiles
(CALM) — Architecture
ISO 240141:2007
Public transport — Interoperable fare
management system — Part 1:
Architecture
ISO/TS 12901- Nanotechnologies — Occupational risk
2:2014
management applied to engineered
nanomaterials — Part 2: Use of the control
banding approach
TC 206
Fine ceramics
TC 232
ISO
17162:2014
Mechanical properties of monolithic
ceramics at room temperature —
Learning services outside formal
education
ISO
29991:2014
*Language learning services outside
formal education — Requirements
TMBG
TC 211
ISO Guide
82:2014
*Guidelines for addressing sustainability in
standards
ISO 191151:2014
Geographic information — Metadata —
Part 1: Fundamentals
CASCO
TC 215
Health informatics
ISO/IEC TS
17027:2014
ISO/TS
16791:2014
*Health informatics — Requirements for
international machine-readable coding of
medicinal product package identifiers
Conformity assessment — Vocabulary
related to competence of persons used for
certification of persons
JTC 1
ISO/TS
18530:2014
*Health Informatics — Automatic
identification and data capture marking
and labelling — Subject of care and
individual provider identification
ISO/IEC/IEEE
880211:2012/Amd
1:2014
ISO
*Health informatics — Health cards —
metropolitan area networks — Specific
requirements — Part 11: Wireless LAN
medium access control (MAC) and
50
applications
physical layer (PHY) specifications —
Amendment 1: Prioritization of
management frames (adoption of IEEE
Std 802-11ae-2012)
ISO/IEC/IEEE
880211:2012/Amd
2:2014
ISO/IEC/IEEE
880211:2012/Amd
3:2014
Amendment 2: MAC enhancements for
robust audio video streaming (adoption of
IEEE Std 802.11aa-2012)
Amendment 3: Enhancements for very
high throughput in the 60 GHz band
(adoption of IEEE Std 802.11ad-2012)
ISO/IEC
25000:2014
Systems and software Quality
Requirements and Evaluation (SQuaRE)
— Guide to SQuaRE
ISO/IEC
25001:2014
Systems and software Quality
— Planning and management
ISO/IEC
25063:2014
Systems and software product Quality
— Common Industry Format (CIF) for
usability: Context of use description
ISO/IEC 29145- *Information technology - Wireless
1:2014
Beacon-enabled Energy Efficient Mesh
network (WiBEEM) for wireless home
network services — Part 1: PHY Layer
1:2008/Cor
techniques — Cryptographic techniques
2:2014
based on elliptic curves — Part 1: General
— Technical Corrigendum 2
1:2014
supplier relationships — Part 1: Overview
and concepts
ISO/IEC
27038:2014
techniques — Specification for digital
redaction
ISO/IEC
29150:2011/Co techniques — Signcryption — Technical
r 1:2014
Corrigendum 1
30:2014
audio-visual objects — Part 30: Timed text
and other visual overlays in ISO base
media file format
ISO/IEC 23000- *Information technology — Multimedia
10:2012/Cor
application format (MPEG-A) — Part 10:
2:2014
Surveillance application format —
ISO/IEC 23003- *Information technology — MPEG audio
3:2012/Amd
technologies — Part 3: Unified speech
1:2014
and audio coding — Amendment 1:
Conformance
8:2011/Amd
interchange formats — Part 8: Finger
1:2014
pattern skeletal data — Amendment 1:
Conformance testing methodology
ISO/IEC 7816- *Identification cards - Integrated circuit
12:2005/Cor
cards — Part 12: Cards with contacts —
1:2014
USB electrical interface and operating
procedures — Technical Corrigendum 1
NORMES CONFIRMEES
ans:
ISO/IEC 24727- *Identification cards — Integrated circuit
2:2008/Amd
card programming interfaces — Part 2:
1:2014
Generic card interface — Amendment 1
TC 5
3:2008/Amd
Application interface — Amendment 1: .
1:2014
Ferrous metal pipes and metallic
fittings
4:2008/Amd
1:2014
Application programming interface (API)
administration — Amendment 1: .
TC 6
ISO 126256:2005
(reconfirmed)
ISO/IEC TR
30117:2014
TC 20
*Information technology — Guide to oncard biometric comparison standards and
51
ISO 3186:2008
ISO 3193:2008
ISO 33531:2002
(reconfirmed)
ISO 33532:2002
(reconfirmed)
ISO 5856:2008
ISO 5857:2008
ISO
12268:1997
(reconfirmed)
ISO
12272:1998
(reconfirmed)
ISO
12274:1997
(reconfirmed)
ISO
12277:2000
(reconfirmed)
ISO
12288:2000
(reconfirmed)
ISO
12290:2000
(reconfirmed)
ISO
13589:1998
(reconfirmed)
ISO
13595:2000
(reconfirmed)
ISO
13596:2000
(reconfirmed)
ISO
13597:2000
(reconfirmed)
ISO
13598:2000
(reconfirmed)
ISO
13599:2000
(reconfirmed)
ISO
13921:2008
ISO
14275:2002
(reconfirmed)
ISO
14276:2002
(reconfirmed)
ISO
14277:2002
(reconfirmed)
ISO
14278:2002
(reconfirmed)
ISO
14279:2002
(reconfirmed)
ISO
14280:2002
(reconfirmed)
ISO
10299:2000
(reconfirmed)
ISO
14281:2002
(reconfirmed)
ISO
12256:2002
(reconfirmed)
TC 21
fighting
ISO 8279:2008
ISO 9255:2008
ISO/TS 116021:2010
ISO
12257:2008
ISO
12258:1998
ISO/TS 116022:2010
(reconfirmed)
52
TC 22
10416:2008
Road vehicles
ISO
28981:2009
TC 23
and forestry
TC 25
Cast irons and pig irons
ISO
16112:2006
TC 34
ISO
21807:2004
(reconfirmed)
ISO
15914:2004
(reconfirmed)
(reconfirmed)
ISO 104266:2008
ISO 104271:2001
(reconfirmed)
ISO 104272:2004
(reconfirmed)
ISO 135034:2006
ISO 135035:2006
TC 38
ISO 104265:2004
ISO 135032:2006
(reconfirmed)
(reconfirmed)
ISO
13500:2008
Food products
ISO
21567:2004
ISO 104264:2004
Textiles
ISO 907310:2003
(reconfirmed)
TC 44
ISO 156164:2008
TC 46
ISO
11800:1998
(reconfirmed)
ISO
14416:2003
(reconfirmed)
TC 67
industries
ISO 104141:2008
TC 72
ISO 93981:2003
(reconfirmed)
ISO 93982:2003
(reconfirmed)
ISO 93983:2003
(reconfirmed)
ISO 93984:2003
(reconfirmed)
ISO 107821:1998
(reconfirmed)
TC 76
ISO 88711:2003
(reconfirmed)
ISO
15759:2005
(reconfirmed)
TC 89
Wood-based panels
ISO
16987:2003
(reconfirmed)
ISO
16998:2003
(reconfirmed)
TC 92
Fire safety
ISO/TS 5658- (reconfirmed)
1:2006
ISO
53
TC 108
TC 110
Industrial trucks
ISO 58325:2005
(reconfirmed)
ISO 58343:2005
(reconfirmed)
ISO
13284:2003
(reconfirmed)
ISO
21281:2005
(reconfirmed)
TC 113
Hydrometry
ISO/TS
3716:2006
(reconfirmed)
TC 121
ISO 233281:2003
(reconfirmed)
TC 130
Graphic technology
ISO 28465:2005
(reconfirmed)
TC 133
Clothing sizing systems - size
designation, size measurement
methods and digital fittings
ISO
15374:1998
(reconfirmed)
ISO
16428:2005
(reconfirmed)
TC 188
Small craft
ISO 96503:2009
ISO 122158:2009
TC 193
Natural gas
ISO 207651:2005
(reconfirmed)
TC 201
ISO
18114:2003
(reconfirmed)
ISO
19318:2004
(reconfirmed)
TC 202
Microbeam analysis
(reconfirmed)
ISO
14594:2003
(reconfirmed)
ISO
14595:2003
(reconfirmed)
JTC 1
TC 138
ISO
13966:1998
ISO 93111:2005
(reconfirmed)
ISO 93113:2005
(reconfirmed)
ISO/IEC
14882:2011
ISO
11673:2005
(reconfirmed)
ISO/IEC
11976:2008
ISO
13760:1998
(reconfirmed)
ISO/IEC 197572:2008
ISO
16871:2003
(reconfirmed)
ISO/IEC 197578:2008
ISO/IEC 197579:2008
ISO/TS
19911:2010
1:2007
ISO
10466:1997
(reconfirmed)
TC 150
NORMES ANNULEES
er
54
TC 43
Acoustics
4:1998
TC 45
ISO 3257:1992 (replaced by )
TC 164
2:1996
ISO/TR
14936:1998
(replaced by )
TC 211
ISO
19115:2003
55
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 avril 2014 au 30 avril 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
TC 8
ISO/DIS 7236 *Ships and marine technology — Inland
navigation vessels — Mounting
attachments for demountable signal
masts for push-tows
Nieuwe publicaties
Frans.
TC 17
Steel
ISO/DIS
19272
*Low alloyed steel - Determination of ten
elements - Glow discharge optical
emission spectrometry (Routine Method)
ISO/DIS 6833
*Heat-treatable steels, alloy steels and
free-cutting steels — Part 3: Case
hardening steels
ISO/DIS 6835
*Heat treatable steels, alloy steels and
free-cutting steels — Part 5: Nitriding
steels
TC 21
fighting
ISO/DIS
7240-8
*Fire detection and alarm systems —
Part 8: Point type fire detectors using a
carbon monoxide sensor in combination
with a heat sensor
TC 22
Road vehicles
ISO/DIS 6519 *Diesel engines — Fuel injection pumps
— Tapers for shaft ends and hubs
ISO/DIS
13674-2.2
*Road vehicles — Test method for the
quantification of on-centre handling —
Part 2: Transition test
TC 23
ISO/DIS
4254-14
*Agricultural machinery — Safety — Part
14: Bale wrappers
TC 35
56
– Classification
ISO/DIS 3248 *Paints and varnishes — Determination
of the effect of heat
ISO/DIS 3668 *Paints and varnishes — Visual
comparison of the colour of paints
ISO/DIS 4624 *Paints and varnishes — Pull-off test for
adhesion
ISO/DIS
7784-3
ISO/DIS
8502-3
ISO/DIS
8502-4
*Paints and varnishes — Determination
of resistance to abrasion — Part 3:
Method with abrasive-paper covered
wheel and linearly reciprocating test
panel
ISO/DIS
17634
*Welding consumables — Tubular cored
electrodes for gas shielded metal arc
welding of creep-resisting steels —
Classification
ISO/DIS
18273
*Welding consumables — Wire
electrodes, wires and rods for welding of
aluminium and aluminium alloys —
Classification
ISO/DIS 669.2 *Resistance welding — Resistance
welding equipment — Mechanical and
electrical requirements
*Preparation of steel substrates before
application of paints and related products
— Tests for the assessment of surface
cleanliness — Part 3: Assessment of
dust on steel surfaces prepared for
painting (pressure-sensitive tape
method)
*Preparation of steel substrates before
application of paints and related products
— Tests for the assessment of surface
cleanliness — Part 4: Guidance on the
estimation of the probability of
condensation prior to paint application
TC 38
Textiles
ISO/DIS
18254
*Textiles — Method for the detection and
determination of alkylphenolethoxylates
(APEO)
TC 41
ISO/DIS 283
*Textile conveyor belts — Full thickness
tensile strength, elongation at break and
elongation at the reference load — Test
method
TC 45
ISO/DIS
15825
*Rubber compounding ingredients —
Carbon black — Determination of
aggregate size distribution by disc
centrifuge photosedimentometry
15825:2004/Cor 1:2006)
TC 61
Plastics
ISO/DIS
16620-1
*Plastics — Biobased content — Part 1:
General principles
ISO/DIS
16620-2
Determination of biobased carbon
content
ISO/DIS
16620-3
Determination of biobased synthetic
polymer content
ISO/DIS 4590 *Rigid cellular plastics — Determination
of the volume percentage of open cells
and of closed cells
TC 67
industries
ISO/DIS
24817
*Petroleum, petrochemical and natural
gas industries — Composite repairs for
pipework — Qualification and design,
installation, testing and inspection
(Revision of ISO/TS 24817:2006)
ISO/DIS
7622-2
*Steel cord conveyor belts —
Longitudinal traction test — Part 2:
Measurement of tensile strength
TC 42
Photography
ISO/DIS
17850
*Photography — Digital cameras —
Geometric distortion (GD) measurements
TC 70
TC 44
ISO/DIS
8528-13
engine driven alternating current
generating sets — Part 13: Safety
TC 83
ISO/DIS 1071 *Welding consumables - Covered
electrodes, wires, rods and tubular cored
electrodes for fusion welding of cast iron
57
and equipment
ISO/DIS
11087
*Alpine ski-bindings — Retention devices
— Requirements and test methods
TC 85
ISO/DIS
7503-1
*Measurement of radioactivity Measurement and evaluation of surface
contamination — Part 1: General
principles
ISO/DIS
7503-2
contamination — Part 2: Test method
using wipe-test samples
ISO/DIS
7503-3
contamination — Part 3: Apparatus
calibration
TC 92
Fire safety
ISO/DIS
16405.2
Room Corner and open calorimeter —
Guidance on sampling and measurement
of effluent gas production using FTIR
technique
ISO/DIS
19702
*Guidance for sampling and analysis of
toxic gases and vapours in fire effluents
using Fourier Transform Infrared
spectroscopy (FTIR)
ISO/DIS
16900-13
*Respiratory protective devices —
Methods of test and test equipment —
Part 13: RPD using regenerated
breathable gas and special application
mining escape RPD: Consolidated test
for gas concentration, temperature,
humidity, work of breathing, breathing
resistance, elastance and duration
ISO/DIS
16975-1
Selection, use and maintenance — Part
1: Establishing and implementing a
respiratory protective device programme
TC 106
Dentistry
ISO/DIS
9693-2
*Dentistry — Compatibility testing — Part
2: Ceramic-ceramic systems
9693:1999/Amd 1:2005)
ISO/DIS
16954
*Dentistry — Test methods for evaluating
antibacterial biofilm treatment methods
for dental unit water delivery systems
ISO/DIS
16408
*Dentistry — Oral hygiene products —
Oral rinses
ISO/DIS
16409
*Dentistry — Oral hygiene products —
Manual interdental brushes
16409:2006/Amd 1:2010)
TC 107
ISO/DIS 2746 *Vitreous and porcelain enamels — High
voltage test
TC 94
and equipment
TC 118
ISO/DIS
11999-9
Part 9: Fire hoods
ISO/DIS
18623-1
*Air compressors and compressed air
systems — Air compressors — Part 1:
Safety requirements
TC 121
equipment
ISO/DIS
16900-7
Part 7: Practical performance test
methods
IEC/DIS
80601-2-71
ISO/DIS
16900-9.2
Part 9: Determination of carbon dioxide
content of the inhaled air
Medical electrical equipment — Part 271: Particular requirements for the basic
functional Near-Infrared Spectroscopy
(NIRS) equipment
ISO/DIS
7396-1.2
ISO/DIS
16900-10
Part 10: Resistance to ignition, flame,
radiant heat and heat
*Medical gas pipeline systems — Part 1:
Pipeline systems for compressed
medical gases and vacuum
(Revision of ISO 7396-1:2007, ISO 73961:2007/Amd 1:2010, ISO 73961:2007/Amd 2:2010)
TC 122
Packaging
58
ISO/DIS 8317 *Child-resistant packaging —
Requirements and testing procedures for
reclosable packages
8317:2003/Cor 1:2005)
TC 130
Graphic technology
ISO/DIS
18619
*Image technology colour management
— Black point compensation
TC 146
Air quality
ISO/DIS
17211
*Stationary source emissions —
Sampling and determination of selenium
compounds in flue gas
TC 149
Cycles
ISO/DIS
13356
*Implants for surgery — Ceramic
materials based on yttria-stabilized
tetragonal zirconia (Y-TZP)
ISO/DIS
5840-1
*Cardiovascular implants — Cardiac
valve prostheses — Part 1: General
requirements
ISO/DIS
5840-2
*Cardiovascular implants — Cardiac
valve prostheses — Part 2: Surgically
implanted heart valve substitutes
ISO/DIS
12417-1
Ergonomics
ISO/DIS
9241-161
*Ergonomics of human-system
interaction — Part 161: Guidance on
visual user-interface elements
TC 160
Glass in building
ISO/DIS
18178
*Glass in building — Laminated solar PV
glass
TC 163
ISO
*Thermal insulating products for building
29472:2008/D applications — Determination of
Amd 1
dimensional stability under specified
temperature and humidity conditions —
Amendment 1
ISO
29767:2008/D applications — Determination of shortAmd 1
term water absorption by partial
immersion — Amendment 1
*Thermal insulating materials for building
ISO
29771:2008/D applications — Determination of organic
Amd 1
content — Amendment 1
TC 164
ISO/DIS
6892-1
Metallic materials — Tensile testing —
Part 1: Method of test at room
temperature
ISO/DIS
14556
*Metallic materials — Charpy V-notch
pendulum impact test — Instrumented
test method
14556:2000/Amd 1:2006)
TC 172
ISO 14490*Optics and optical instruments — Test
5:2005/DAmd methods for telescopic systems — Part
1
5: Test methods for transmittance —
Amendment 1
ISO/DIS 9050 *Glass in building — Determination of
light transmittance, solar direct
transmittance, total solar energy
transmittance, ultraviolet transmittance
and related glazing factors
ISO/DIS
16932
*Glass in building — Pendulum impact
testing and classification of safety glass
ISO
Amd 1
dimensional stability under constant
normal laboratory conditions (23 degrees
C/50 % relative humidity) — Amendment
1
*Cardiovascular implants and
extracorporeal systems — Vascular
device-drug combination products —
Part 1: General requirements
TC 159
ISO/DIS
29584
ISO
Amd 1
squareness — Amendment 1
ISO/DIS 6695 *Cycles — Pedal axle and crank
assembly with square end fitting —
Assembly dimensions
TC 150
Test and classification
*Glass in building — Destructivewindstorm-resistant security glazing —
ISO/DIS
16671
*Ophthalmic implants — Irrigating
solutions for ophthalmic surgery
ISO/DIS
16672
*Ophthalmic implants — Ocular
endotamponades
ISO/DIS
11810
*Lasers and laser-related equipment —
Test method and classification for the
59
laser resistance of surgical drapes and/or
patient protective covers — Primary
ignition, penetration, flame spread and
secondary ignition
11810-2:2007)
Toleranced features
TC 238
Solid biofuels
ISO/DIS
17829
*Solid Biofuels — Determination of
length and diameter of pellets
TC 254
Safety of amusement rides and
amusement devices
TC 189
Ceramic tile
ISO/DIS
10545-13
*Ceramic tiles — Main element — Part
13: Determination of chemical resistance
ISO/DIS
17842-1
*Safety of amusement rides and
amusement devices — Part 1: Design
and manufacture
ISO/DIS
10545-14
*Ceramic tiles — Part 14: Determination
of resistance to stains
10545-14:1995/Cor 1:1997)
ISO/DIS
17842-2
amusement devices — Part 2: Operation
and use
TC 256
Pigments, dyestuffs and extenders
ISO/DIS
13007-5
*Ceramic tiles — Grouts and adhesives
— Part 5: Liquid applied waterproofing
membranes for use beneath ceramic
tiling bonded with adhesives —
Requirements, test methods, evaluation
of conformity, classification and
designation
ISO/DIS
18314-1
*Analytical colorimetry — Part 1:
Practical colour measurement
ISO/DIS
18314-2
*Analytical colorimetry — Part 2:
Saunderson correction, solutions of the
Kubelka-Munk equation, tinting strength,
hiding power
ISO/DIS
18314-3
*Analytical colorimetry — Part 3: Special
indices
TC 266
Biomimetics
ISO/DIS
18458
*Biomimetics — Terminology, concepts
and methodology
ISO/DIS
18459
*Biomimetics — Biomimetic structural
optimization
JTC 1
ISO/IEC DIS
8825-7
*Information technology — ASN.1
encoding rules — Part 7: Specification of
Octet Encoding Rules (OER)
TC 199
Safety of machinery
ISO/DIS
13850
*Safety of machinery — Emergency stop
function — Principles for design
TC 206
Fine ceramics
ISO/DIS
18558
method for determining elastic modulus
and bending strength of ceramic tube
and rings
TC 210
medical devices
ISO/DIS
16142-1
*Medical devices — Recognized
essential principles of safety and
performance of medical devices — Part
1: General essential principles and
additional specific essential principles for
all non-IVD medical devices and
guidance on the selection of standards
*Information technology — Open
ISO/IEC
19793:2008/D Distributed Processing — Use of UML for
Amd 1
ODP system specifications —
Amendment 1
ISO/IEC TR
291103:2011/DAmd
1
*Software engineering — Lifecycle
profiles for Very Small Entities (VSEs) —
Part 3: Assessment guide —
Amendment 1:
ISO/IEC DIS
29169
ISO
*Geometrical product specifications
3040:2009/DA (GPS) — Dimensioning and tolerancing
md 1.2
— Cones — Amendment 1
*Information technology — Process
assessment — The application of
conformity assessment methodology to
the assessment to process quality
characteristics and organizational
maturity
ISO/IEC DIS
33063
ISO/DIS
17450-3
*Information technology — Process
assessment — Process assessment
model for software testing
ISO/IEC DIS
*Identification cards — Integrated circuit
Medical device software — Software life
IEC
62304:2006/D cycle processes — Amendment 1
Amd 1
TC 213
(GPS) — General concepts — Part 3:
60
7816-6
cards — Part 6: Interindustry data
elements for interchange
ISO/IEC 7816-6:2004/Cor 1:2006)
29167-16
techniques — Part 16: Air interface for
security services crypto suite ECDSAECDH
ISO/IEC DIS
10373-5
*Identification cards — Test methods —
Part 5: Optical memory cards
ISO/IEC DIS
15944-9
ISO/IEC DIS
11693-3
*Identification cards — Optical memory
cards — Part 3: Authentication
techniques
*Information technology — Business
Operational View — Part 9: Business
transaction traceability framework for
commitment exchange
ISO/IEC DIS
17549-2
ISO/IEC DIS
11695-1
cards — Holographic recording method
— Part 1: Physical characteristics
*Information technology — User interface
guidelines on menu navigation — Part 2:
Navigation with 4-direction devices
ISO/IEC DIS
30113-1
ISO/IEC DIS
11695-2
cards — Holographic recording method
— Part 2: Dimensions and location of
accessible optical area
— Gesture-based interfaces across
devices and methods — Part 1:
Framework
ISO/IEC DIS
30122-1
*Information technology — User
interfaces — Voice commands — Part 1:
Framework and general guidance
ISO/IEC
144433:2011/DAmd
4
*Identification cards — Contactless
integrated circuit cards — Proximity
cards — Part 3: Initialization and
anticollision — Amendment 4: Handling
rules of RFU bits
ISO/IEC DIS
30122-4
*Information technology — User
interfaces — Voice commands — Part 4:
Management of voice command
registration
ISO/IEC
144434:2008/DAmd
5
integrated circuit cards — Proximity
cards — Part 4: Transmission protocol —
Amendment 5: Handling rules of RFU
bits
ISO/IEC
197941:2011/DAmd
2.2
*Information technology — Biometric
data interchange formats — Part 1:
Framework — Amendment 2:
Framework·for·XML·encoding
ISO/IEC DIS
17839-2
*Information technology — Identification
cards — Biometric system on card —
Part 2: Physical characteristics
ISO/IEC
197946:2011/DAmd
1
data interchange formats — Part 6: Iris
image data — Amendment 1:
Conformance testing methodology and
clarification of defects
ISO/IEC DIS
19776-3
3: Compressed binary encoding
ISO/IEC
197947:2014/DAmd
1
Signature/sign time series data —
Amendment 1: XML encoding
ISO/IEC
197949:2011/DAmd
2
Vascular image data — Amendment 2:
XML Encoding
ISO/IEC
197952:2007/DAmd
1
performance testing and reporting —
Part 2: Testing methodologies for
technology and scenario evaluation —
Amendment 1: Testing of multimodal
biometric implementations
ISO/IEC DIS
18477-1
*Information technology — JPEG HDR
image coding system — Part 1: Coding
of high dynamic range images
ISO/IEC
230081/DAmd 2
MPEG media transport (MMT) —
Amendment 2: Header Compression and
Cross Layer Interface
ISO/IEC DIS
29167-13
techniques — Part 13: Air Interface for
security services — Crypto suite Grain128A
ISO/IEC DIS
PROJETS FINALS
er
61
ISO/FDIS
5610-7
*Tool holders with rectangular shank for
indexable inserts — Part 7: Style J
ISO/FDIS
5610-8
*Paper, board and pulps — Measurement
of diffuse radiance factor (diffuse
reflectance factor)
indexable inserts — Part 8: Style K
ISO/FDIS
5610-9
indexable inserts — Part 9: Style L
ISO/FDIS
5630-7
*Paper and board — Accelerated ageing
— Part 7: Exposure to light
ISO/FDIS
5610-10
TC 10
indexable inserts — Part 10: Style N
ISO/FDIS
10628-1
*Diagrams for the chemical and
petrochemical industry — Part 1:
Specification of diagrams
ISO/FDIS
5610-11
indexable inserts — Part 11: Style R
ISO/FDIS
5610-12
indexable inserts — Part 12: Style S
ISO/FDIS
5610-13
indexable inserts — Part 13: Style T
ISO/FDIS
5610-14
indexable inserts — Part 14: Style H
TC 2
Fasteners
ISO/FDIS
1891-2
*Fasteners — Terminology — Part 2:
Vocabulary and definitions for coatings
TC 6
ISO/FDIS
2469.2
TC 21
fighting
ISO/FDIS
7240-28
28: Fire protection control equipment
TC 23
and forestry
ISO/FDIS
11783-12
*Tractors and machinery for agriculture
and forestry — Serial control and
communications data network — Part 12:
Diagnostics services
ISO/FDIS
5610-15
indexable inserts — Part 15: Style V
TC 34
Food products
TC 29
Small tools
ISO/FDIS
5610-1
indexable inserts — Part 1: General
survey, correlation and determination of
dimensions
ISO
5555:2001/FDA Sampling — Amendment 1: Flexitanks
md 1
ISO/FDIS
5610-2
indexable inserts — Part 2: Style A
ISO/FDIS
5610-3
indexable inserts — Part 3: Style B
ISO/FDIS
5610-4
indexable inserts — Part 4: Style D
ISO/FDIS
5610-5
indexable inserts — Part 5: Style F
ISO/FDIS
5610-6
indexable inserts — Part 6: Style G
ISO/FDIS
22004
*Food safety management systems —
Guidance on the application of ISO 22000
TC 35
ISO/FDIS
17463
*Paints and varnishes — Guidelines for
the determination of anticorrosive
properties of organic coatings by
accelerated cyclic electrochemical
technique
TC 38
Textiles
ISO/FDIS
11092
*Textiles — Physiological effects —
Measurement of thermal and water-vapour
resistance under steady-state conditions
(sweating guarded-hotplate test)
11092:1993/Amd 1:2012)
ISO/FDIS
*Textiles — Determination of antiviral
62
18184
activity of textile products
TC 43
Acoustics
ISO/FDIS
12913-1
*Acoustics — Soundscape — Part 1:
Definition and conceptual framework
TC 51
materials handling
ISO/FDIS
18613
*Repair of flat wooden pallets
TC 71
ISO/FDIS
19338
*Performance and assessment
requirements for design standards on
structural concrete
TC 83
and equipment
ISO/FDIS
13992
*Alpine touring ski-bindings —
TC 106
Dentistry
ISO/FDIS
15841
*Dentistry — Wires for use in orthodontics
TC 121
by means of bulge test with optical
measuring systems
ISO/FDIS 8836 *Suction catheters for use in the
respiratory tract
Graphical symbols
ISO/FDIS
9186-3
*Graphical symbols — Test methods —
Part 3: Method for testing referent
association
TC 147
Water quality
ISO/FDIS
16308
glyphosate and AMPA — Method using
high performance liquid chromatography
(HPLC) with tandem mass spectrometric
detection
TC 159
Ergonomics
ISO/FDIS
24504
*Ergonomics — Accessible design —
Sound pressure levels of spoken
announcements for products and public
address systems
ISO/FDIS
11979-2
— Part 2: Optical properties and test
methods
11979-2:1999/Cor 1:2003)
ISO/FDIS
11979-7
— Part 7: Clinical investigations
ISO 11979*Ophthalmic implants — Intraocular lenses
9:2006/FDAmd — Part 9: Multifocal intraocular lenses —
Amendment 1
1
ISO/FDIS 5367 *Anaesthetic and respiratory equipment —
Breathing sets and connectors
TC 145
TC 172
ISO 11979*Ophthalmic implants — Intraocular lenses
10:2006/FDAm — Part 10: Phakic intraocular lenses —
d1
Amendment 1
TC 173
disability
ISO/FDIS
17069
*Accessible design — Consideration and
assistive products for accessible meeting
TC 223
Societal security
ISO/FDIS
22397
*Societal security — Guidelines for
establishing partnering arrangements
TC 244
Industrial furnaces and associated
processing equipment
ISO/FDIS
13577-2
*Industrial furnaces and associated
processing equipment — Safety — Part 2:
Combustion and fuel handling systems
ISO/FDIS
13577-4
*Industrial furnace and associated
Protective systems
IULTCS
ISO/FDIS 2588 *Leather — Sampling — Number of items
for a gross sample
JTC 1
13157-1
exchange between systems — NFC
Security — Part 1: NFC-SEC NFCIP-1
security services and protocol
TC 164
ISO/FDIS
16808
*Metallic materials — Sheet and strip —
Determination of biaxial stress-strain curve
19369
exchange between systems — NFCIP-2
test methods
ISO/IEC FDIS *Identification cards — Recording
63
7811-2
technique — Part 2: Magnetic stripe —
Low coercivity
ISO
13820:2014
*Paper, board and corrugated fibreboard
— Description and calibration of
compression-testing equipment
TC 8
ISO
17602:2014
*Ships and marine technology — Metal
valves for use in flanged pipe — Face-toface and centre-to-face dimensions
ISO 161455:2014
Protective coatings and inspection method
— Part 5: Assessment method for coating
damages
TC 20
ISO
10327:2014
*Air cargo — Main deck containers —
Design and testing
ISO/TR
11233:2014
*Space systems — Orbit determination
and estimation — Process for describing
techniques
ISO
16457:2014
*Space systems — Space environment
(natural and artificial) — The Earth's
ionosphere model: international reference
ionosphere (IRI) model and extensions to
the plasmasphere
ISO/TR
18147:2014
*Space environment (natural and artificial)
— Method of the solar energetic protons
fluences and peak fluxes determination
ISO
23462:2014
*Space systems — Guidelines to define
the management framework for a space
project
TC 21
fighting
ISO 724012:2014
12: Line type smoke detectors using a
transmitted optical beam
TC 22
Road vehicles
Nouvelles Normes internationales publiées entre le 1 avril
2014 et le 30 avril 2014.
anglais seulement
ISO 65504:2014
*Road vehicles — Sheath-type glow-plugs
with conical seating and their cylinder
head housing — Part 4: M8 x 1 glow-plugs
COPOLCO
ISO 119922:2014
*Road vehicles — Interchange of digital
information on electrical connections
between towing and towed vehicles —
Part 2: Application layer for brakes and
running gear
ISO 119924:2014
*Road vehicles — Interchange of digital
information on electrical connections
between towing and towed vehicles —
Part 4: Diagnostic communication
7811-7
High coercivity, high density
ISO/IEC FDIS *Information technology — Magnetic
8484
stripes on savingsbooks
14496-10
audio-visual objects — Part 10: Advanced
Video Coding
ISO/IEC 14496-10:2012/Amd 1:2013,
ISO/IEC 14496-10:2012/Amd 2:2013,
ISO/IEC 14496-10:2012/DAmd 3, ISO/IEC
14496-10:2012/DAmd 4, ISO/IEC 1449610:2012/DAmd 5)
ISO/IEC FDIS *Information technology — Radio
18000-7
management — Part 7: Parameters for
active air interface communications at 433
MHz
29167-1
— Part 1: Security services for RFID air
interfaces
ISO/IEC 19788-*Information technology — Learning,
1:2011/FDAmd education and training — Metadata for
1
learning resources — Part 1: Framework
— Amendment 1
NORMES PUBLIEES
er
ISO
*Road vehicles — Test methods for
10605:2008/Am electrical disturbances from electrostatic
d 1:2014
discharge — Amendment 1
ISO/IEC Guide Safety aspects — Guidelines for their
51:2014
inclusion in standards
TC 4
Rolling bearings
ISO
12044:2014
Rolling bearings — Single-row angular
contact ball bearings — Chamfer
dimensions for outer ring non-thrust side
TC 6
64
ISO 172151:2014
ISO 172153:2014
controlled axes
*Road vehicles — Video communication
interface for cameras (VCIC) — Part 1:
General information and use case
definition
Camera message dictionary
ISO 172154:2014
Implementation of communication
requirements
ISO 185422:2014
*Road vehicles — Standardized repair and
maintenance information (RMI)
terminology — Part 2: Standardized
process implementation requirements,
Registration Authority
ISO/TS
21609:2014
*Road vehicles — (EMC) guidelines for
installation of aftermarket radio frequency
transmitting equipment
ISO/TS
17242:2014
*Quasi-static calibration procedure for belt
force transducers
TC 29
Small tools
ISO 2936:2014 Assembly tools for screws and nuts —
Hexagon socket screw keys
TC 41
ISO
24035:2014
Belt drives — V-belts and the
corresponding pulleys for agricultural
machineries — Dimensions
TC 43
Acoustics
ISO 101405:2010/Amd
1:2014
Acoustics — Laboratory measurement of
sound insulation of building elements —
Part 5: Requirements for test facilities and
equipment — Amendment 1: Rainfall
sound
TC 44
ISO
14114:2014
Gas welding equipment — Acetylene
manifold systems for welding, cutting and
allied processes — General requirements
ISO
14555:2014
Welding — Arc stud welding of metallic
materials
TC 45
ISO 2393:2014 *Rubber test mixes — Preparation, mixing
procedures
ISO/TS
16095:2014
*Reclaimed rubber derived from products
containing mainly natural rubber —
Evaluation procedure
TC 31
ISO
20562:2014
Tyre valves — ISO core chambers No. 1,
No. 2, No. 3 and No. 4
ISO/TS
16096:2014
*Reclaimed isobutene-isoprene (IIR)
rubber — Evaluation procedure
TC 34
Food products
TC 46
ISO
16439:2014
*Information and documentation —
Methods and procedures for assessing the
impact of libraries
ISO/TR
18128:2014
Information and documentation — Risk
assessment for records processes and
systems
TC 54
Essential oils
ISO
Microbiology of food and animal feeding
7218:2007/Amd stuffs — General requirements and
1:2013
guidance for microbiological examinations
— Amendment 1
ISO/TS
22003:2013
Food safety management systems —
and certification of food safety
management systems
TC 38
Textiles
ISO
16928:2014
Essential oil of ginger [Zingiber officinale
Roscoe]
ISO
14389:2014
Textiles — Determination of the phthalate
content — Tetrahydrofuran method
TC 58
Gas cylinders
ISO 172995:2014
property — Part 5: Metal-oxide
semiconductor sensor method
ISO
Gas cylinders — Refillable seamless
7866:2012/Cor aluminium alloy gas cylinders — Design,
1:2014
construction and testing — Technical
Corrigendum 1
ISO
15625:2014
Silk — Electronic test method for defects
and evenness of raw silk
TC 61
Plastics
TC 39
Machine tools
ISO
17221:2014
*Plastics — Determination of image clarity
(degree of sharpness of reflected or
transmitted image)
ISO 163651:2014
ISO 230-2:2014 Test code for machine tools — Part 2:
Determination of accuracy and
repeatability of positioning of numerically
65
ISO 163652:2014
ISO 163653:2014
specifications
ISO 51491:2014
Refrigerating systems and heat pumps —
Safety and environmental requirements —
Part 1: Definitions, classification and
selection criteria
ISO 51492:2014
Part 2: Design, construction, testing,
marking and documentation
ISO 51493:2014
Part 3: Installation site
Distinction between ether and ester
polyurethanes by determination of the
ester group content
TC 67
industries
ISO 51494:2014
Part 4: Operation, maintenance, repair
and recovery
ISO
27627:2014
Aluminium alloy drill pipe thread
connection gauging
TC 92
Fire safety
ISO/TR
17755:2014
*Fire safety — Overview of national fire
statistics practices
ISO 30082:2014
Fire-resistance tests — Part 2: Lift landing
door assemblies
TC 69
ISO 35344:2014
Statistics — Vocabulary and symbols —
Part 4: Survey sampling
ISO 39511:2013
Sampling procedures for inspection by
variables — Part 1: Specification for single
sampling plans indexed by acceptance
quality limit (AQL) for lot-by-lot inspection
for a single quality characteristic and a
single AQL
ISO/TR 16730- Fire safety engineering — Assessment,
5:2013
verification and validation of calculation
methods — Part 5: Example of an Egress
model
TC 94
and equipment
Sampling procedures for inspection by
variables — Part 2: General specification
for single sampling plans indexed by
acceptance quality limit (AQL) for lot-by-lot
inspection of independent quality
characteristics
ISO
20346:2014
Personal protective equipment —
Protective footwear
TC 106
Dentistry
ISO 91733:2014
Dentistry — Extraction forceps — Part 3:
Design
TC 71
TC 108
ISO 163111:2014
*Maintenance and repair of concrete
structures — Part 1: General principles
ISO 184362:2014
ISO 163112:2014
structures — Part 2: Assessment of
existing concrete structures
— Part 2: Vibration condition monitoring
and diagnostics
ISO 163113:2014
structures — Part 3: Design of repairs and
prevention
TC 112
Vacuum technology
ISO 35293:2014
ISO 163114:2014
structures — Part 4: Execution of repairs
and prevention
Vacuum technology — Vocabulary — Part
3: Total and partial pressure vacuum
gauges
TC 121
ISO 133152:2014
*Environmental management for concrete
and concrete structures — Part 2: System
boundary and inventory data
ISO 100792:2014
Medical suction equipment — Part 2:
Manually powered suction equipment
ISO 100793:2014
TC 86
Medical suction equipment — Part 3:
Suction equipment powered from a
vacuum or positive pressure gas source
ISO 39512:2013
66
TC 130
Graphic technology
22493:2014
microscopy — Vocabulary
ISO 126472:2013
Graphic technology — Process control for
separations, proof and production prints —
Part 2: Offset lithographic processes
TC 204
ISO
11270:2014
TC 135
*Intelligent transport systems — Lane
keeping assistance systems (LKAS) —
procedures
ISO 34521:2013
Non-destructive testing — Penetrant
testing — Part 1: General principles
ISO/TS
17419:2014
TC 138
Cooperative systems — Classification and
management of ITS applications in a
global context
ISO 44272:2007/Amd
1:2014
*Plastics piping systems — Polyethylene
(PE) pipes and fittings for water supply —
Part 2: Pipes — Amendment 1
ISO/TS
17423:2014
Cooperative systems — ITS application
requirements and objectives for selection
of communication profiles
TC 206
Fine ceramics
ISO
17860:2014
Determination of drying loss of ceramic
granules
TC 211
ISO 8513:2014 *Plastics piping systems — Glassreinforced thermosetting plastics (GRP)
pipes — Test methods for the
determination of the apparent initial
longitudinal tensile strength
TC 142
Cleaning equipment for air and other
gases
ISO 101211:2014
Test method for assessing the
performance of gas-phase air cleaning
media and devices for general ventilation
— Part 1: Gas-phase air cleaning media
TC 146
Air quality
ISO
Geographic information — Methodology
19110:2005/Am for feature cataloguing — Amendment 1
d 1:2011
TC 213
ISO 8672:2014 *Air quality — Determination of the
number concentration of airborne
inorganic fibres by phase contrast optical
microscopy — Membrane filter method
ISO/TS 8062- Geometrical product specifications (GPS)
2:2013
— Dimensional and geometrical
tolerances for moulded parts — Part 2:
Rules
TC 147
Water quality
TC 214
Elevating work platforms
ISO 131652:2014
Water quality — Radium-226 — Part 2:
Test method using emanometry
ISO
18893:2014
*Mobile elevating work platforms — Safety
principles, inspection, maintenance and
operation
TC 154
administration
TC 215
Health informatics
ISO 150005:2014
*Electronic Business Extensible Markup
Language (ebXML) — Part 5: Core
Components Specification (CCS)
ISO/IEEE
1107310103:2014
device, cardiac
TC 165
Timber structures
ISO
10983:2014
*Timber — Finger joints — Minimum
production requirements and testing
methods
ISO/IEEE
1107310417:2014
TC 180
Solar energy
ISO/IEEE
1107310418:2014
TC 217
Cosmetics
ISO/TR
17276:2014
Cosmetics — Analytical approach for
screening and quantification methods for
heavy metals in cosmetics
ISO 9806:2013 Solar energy — Solar thermal collectors
— Test methods
TC 202
Microbeam analysis
ISO
*Microbeam analysis — Scanning electron
67
90006:2013
service management and its integration
with ISO/IEC 20000-1:2011
TC 228
ISO
21101:2014
Adventure tourism — Safety management
TC 238
Solid biofuels
ISO 172251:2014
Solid biofuels — Fuel specifications and
classes — Part 1: General requirements
ISO 172252:2014
classes — Part 2: Graded wood pellets
ISO 172253:2014
classes — Part 3: Graded wood briquettes
ISO 172254:2014
classes — Part 4: Graded wood chips
ISO 172255:2014
classes — Part 5: Graded firewood
ISO 172256:2014
classes — Part 6: Graded non-woody
pellets
ISO 172257:2014
classes — Part 7: Graded non-woody
briquettes
TC 249
Traditional chinese medicine
ISO 172171:2014
*Traditional Chinese medicine — Ginseng
seeds and seedlings — Part 1: Panax
ginseng C.A. Meyer
CASCO
ISO/IEC 23002- *Information technology — MPEG video
4:2014
technologies — Part 4: Video tool library
ISO/IEC
17011:2004
*Conformity assessment — General
requirements for accreditation bodies
accrediting conformity assessment bodies
ISO/IEC TR
20007:2014
3:2011/Amd
3:2014
Amendment 3: Alternating between PICC
and PCD functionalities, and PICC
supporting both types
ISO/IEC 14776- *Information technology -Small computer
251:2014
system interface (SCSI) — Part 251: USB
attached SCSI (UAS)
ISO/IEC 13818- *Information technology — Generic coding
1:2013/Amd
of moving pictures and associated audio
2:2014
information — Part 1: Systems —
Amendment 2: Signalling of transport files,
signalling MVC view association to eye
and MIME type registration
1:2013/Amd
3:2014
Amendment 3: Transport of HEVC video
over MPEG-2 systems
ISO/IEC TS
17021-5:2014 for bodies providing audit and certification
of management systems — Part 5:
Competence requirements for auditing
and certification of asset management
systems
JTC 1
ISO/IEC
19464:2014
*Information technology — Advanced
Message Queuing Protocol (AMQP) v1.0
specification
ISO/IEC
19508:2014
*Information technology — Object
Management Group Meta Object Facility
(MOF) Core
ISO/IEC
19509:2014
*Information technology — Object
Management Group XML Metadata
Interchange (XMI)
1:2013/Amd
4:2014
Amendment 4: Support for event signalling
in Transport Stream in MPEG-2 systems
*Information technology — Cultural and
linguistic interoperability — Definitions and
relationship between symbols, icons,
animated icons, pictograms, characters
and glyphs
ISO/IEC 29109- *Information technology — Conformance
5:2014
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 — Part 5: Face image data
ISO/IEC TR
*Information technology — Service
20000-10:2013 management — Part 10: Concepts and
terminology
NORMES CONFIRMEES
ans:
IIW
ISO/IEC/IEEE *Standard for Ethernet — Part 3:
8802-3:2014
ISO/TR
13393:2009
ISO/IEC TR
TC 1
Information technology — Guidelines for
the application of ISO 9001:2008 to IT
68
International Institute of Welding
Screw threads
ISO 68-1:1998 (reconfirmed)
2:2010
ISO 68-2:1998 (reconfirmed)
ISO 156303:2010
ISO 75072:2005
(reconfirmed)
ISO 75075:2000
(reconfirmed)
ISO
11563:2003
(reconfirmed)
TC 29
Small tools
TC 6
TC 28
TC 31
TC 33
Refractories
ISO 82542:2003
(reconfirmed)
ISO 82543:2004
(reconfirmed)
ISO
10635:1999
(reconfirmed)
ISO 110936:2005
(reconfirmed)
ISO 126801:2005
(reconfirmed)
ISO
23713:2005
(reconfirmed)
ISO 210782:2006
(reconfirmed)
TC 8
TC 34
Food products
ISO
15583:2005
(reconfirmed)
ISO
17894:2005
(reconfirmed)
ISO 105401:2003
(reconfirmed)
TC 10
(reconfirmed)
ISO 21621:1993
(reconfirmed)
ISO 105402:2003
ISO
13884:2003
(reconfirmed)
ISO 3656:2011
ISO 39521:1981
(reconfirmed)
ISO
15267:1998
(reconfirmed)
ISO
15785:2002
(reconfirmed)
ISO 157882:2003
(reconfirmed)
TC 17
Steel
ISO
18395:2005
(reconfirmed)
ISO 10354:1982
(reconfirmed)
ISO
20723:2004
(reconfirmed)
ISO
29822:2009
ISO
29841:2009
ISO 156301:2010
TC 38
Textiles
ISO 15630-
69
TC 44
ISO
10564:1993
(reconfirmed)
ISO
24394:2008
TC 67
industries
ISO
24410:2005
(reconfirmed)
TC 146
Air quality
ISO/TS
27469:2010
TC 147
Water quality
ISO 79811:2005
(reconfirmed)
ISO 79812:2005
(reconfirmed)
TC 69
ISO 118431:1997
(reconfirmed)
ISO
18412:2005
(reconfirmed)
ISO 118433:2003
(reconfirmed)
ISO
17995:2005
(reconfirmed)
ISO 136411:2003
(reconfirmed)
ISO 136412:2003
(reconfirmed)
ISO 229651:2007
ISO
16240:2005
(reconfirmed)
ISO 229652:2007
TC 158
Analysis of gases
ISO/TS
28037:2010
TC 71
TC 92
Fire safety
(reconfirmed)
ISO 61458:2005
(reconfirmed)
ISO 102945:2005
ISO 614511:2005
(reconfirmed)
TC 102
ISO 95161:2003
ISO
15796:2005
(reconfirmed)
ISO/TS
16878:2010
TC 159
Ergonomics
ISO
11428:1996
(reconfirmed)
(reconfirmed)
TC 105
Steel wire ropes
ISO
10425:2003
(reconfirmed)
ISO
11429:1996
TC 114
Horology
ISO
10553:2003
(reconfirmed)
2:2001
TC 118
ISO/TS
14415:2005
(reconfirmed)
TC 163
ISO 104402:2001
(reconfirmed)
ISO
10442:2002
(reconfirmed)
ISO
11561:1999
(reconfirmed)
TC 127
ISO
(reconfirmed)
70
15148:2002
TC 79
TC 198
ISO 134086:2005
(reconfirmed)
TC 201
ISO/TS
25138:2010
TC 229
Nanotechnologies
ISO/TS
10867:2010
ISO/TS
11251:2010
ISO
10049:1992
(replaced by )
TC 85
ISO/TS 800043:2010
TC 86
ISO 5149:1993 (replaced by ISO 5149-1:2014, ISO 51492:2014, ISO 5149-3:2014, ISO 51494:2014)
NORMES ANNULEES
TC 87
er
Cork
TC 2
Fasteners
ISO
10485:1991
(replaced by )
TC 92
TC 8
1:1999
ISO
17357:2002
(replaced by ISO 17357-1:2014, ISO
17357-2:2014)
2:1999
TC 20
ISO/TS
16457:2009
3:1999
ISO/TR
23462:2007
TC 26
Copper and copper alloys
4:1999
5:1999
6:1999
7:1999
TC 28
8:1999
TC 34
Fire safety
TC 108
ISO
10815:1996
(replaced by )
TC 110
Industrial trucks
ISO
22879:2004
(replaced by )
Food products
TC 45
ISO 65282:1992
(replaced by )
71
ISO
22880:2004
(replaced by )
ISO
22882:2004
(replaced by )
TC 126
Tobacco and tobacco products
ISO
10919:1994
(replaced by )
TC 130
Graphic technology
ISO 28464:2000
(replaced by )
TC 154
administration
5:2005
5:2005/Amd
1:2011
TC 209
Cleanrooms and associated controlled
environments
ISO 146446:2007
(replaced by )
72
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 mai 2014 au 31 mai 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
IIW
ISO/DIS
18211
*Non-destructive testing — Long range
inspection of above ground pipelines and
plant piping using guided wave testing
with axial propagation
PC 272
Forensic sciences
ISO/DIS
18385
*Minimizing the risk of DNA
contamination in products used to collect
and analyze biological material for
forensic purposes
TC 2
Fasteners
Nieuwe publicaties
Frans.
ISO/DIS 2320 *Fasteners — Prevailing torque type
steel nuts — Mechanical and
performance properties
ISO/DIS
10484
*Fasteners — Widening test on nuts
TC 20
ISO/DIS
8278.2
*Aerospace series — Hydraulic, pressure
compensated, variable delivery pumps
— General requirements
ISO/DIS
9206.2
*Aerospace series — Constant
displacement hydraulic motors —
General specifications
ISO/DIS 9940 *Aerospace series — Fluid, hydraulic,
phosphate ester-base, fire resistant —
Technical specification
ISO/DIS
23748
*Aerospace series - O-ring grooves Dimensions
ISO/DIS
16164
*Space Systems — Disposal of satellites
operating in or crossing Low Earth Orbit
ISO/DIS
17689
*Space systems — Interface Control
Documents between ground systems,
ground support equipment and launch
vehicle with payload
73
ISO/DIS
18197
*Space systems — Space based
services requirements for centimeter
class positioning
TC 21
fighting
charging
ISO/DIS 7165 *Fire fighting — Portable fire
extinguishers — Performance and
construction
ISO/DIS
11601
*Fire fighting — Wheeled fire
extinguishers — Performance and
construction
TC 22
Road vehicles
ISO/DIS
23013
*Road vehicles — Determination to
forced entry of safety glass constructions
used in vehicle glazing — Test of glazing
systems
*Motorcycles — Measurement method
ISO 64603:2007/DAmd for gaseous exhaust emissions and fuel
1
consumption — Part 3: Fuel
consumption measurement at a constant
speed — Amendment 1
ISO
*Mopeds - Methods for setting the
28981:2009/D running resistance on a chassis
Amd 1
dynamometer — Amendment 1
ISO/DIS 5681 *Equipment for crop protection —
Vocabulary
TC 35
ISO/DIS
7784-1
Method with abrasive-paper covered
wheels and rotating test panel
ISO/DIS
7784-2
Method with abrasive rubber wheels and
rotating test panel
TC 38
Textiles
ISO/DIS
18080-1
Textiles — Test methods for evaluating
the electrostatic propensity of fabrics- —
Part 1: Test method using corona
Photography
ISO/DIS
17957
Shading measurements
TC 43
Acoustics
ISO/DIS
17534-1
*Acoustics — Software for the calculation
of sound outdoors — Part 1: Quality
requirements and quality assurance
TC 44
ISO/DIS 6848 *Arc welding and cutting —
Nonconsumable tungsten electrodes —
Classification
ISO 6460*Motorcycles — Measurement method
1:2007/DAmd for gaseous exhaust emissions and fuel
1
consumption — Part 1: General test
requirements — Amendment 1
TC 23
TC 42
TC 45
ISO/DIS 2005 *Rubber latex, natural, concentrate —
Determination of sludge content
2005:1992/Amd 1:2006)
ISO/DIS
5794-2
*Rubber compounding ingredients —
Silica, precipitated, hydrated — Part 2:
Evaluation procedures in styrenebutadiene rubber
TC 59
ISO/DIS
15928-1
*Houses — Description of performance
— Part 1: Structural safety
ISO/DIS
15928-2
— Part 2: Structural serviceability
ISO/DIS
15928-3
— Part 3: Structural durability
TC 61
Plastics
ISO/DIS
18263-1
*Plastics — Mixtures of polypropylene
(PP) and polyethylene (PE) recyclate
derived from PP and PE used for flexible
and rigid consumer packaging — Part 1:
specification
ISO/DIS
18263-2
*Plastics — Mixtures of polypropylene
(PP) and polyethylene (PE) recyclate
derived from PP and PE used for flexible
and rigid consumenr packaging — Part
2: Preparation of test specimens and
TC 67
74
industries
TC 130
Graphic technology
ISO/DIS
19901-3
Specific requirements for offshore
structures — Part 3: Topsides structure
ISO/DIS
12643-1
TC 70
Graphic technology — Safety
requirements for graphic technology
equipment and systems — Part 1:
General requirements
ISO/DIS
8528-8
engine driven alternating current
generating sets — Part 8: Generating
sets
ISO/DIS
12643-2
Prepress and press equipment and
systems
TC 71
Concrete, reinforced concrete and
pre-stressed concrete
ISO/DIS
12643-3
ISO/DIS
18319
*Fibre-reinforced polymer (FRP)
reinforcement for concrete structures:
Specifications of FRP sheets
TC 87
Cork
Binding and finishing equipment and
systems
ISO/DIS
12643-4
Converting equipment and systems
TC 135
ISO/DIS
18249
*Non-destructive testing — Acoustic
emission testing — Testing of fibre
reinforced polymers — Specific
methodology and general evaluation
criteria
TC 138
ISO/DIS 1215 *Virgin cork, raw reproduction cork,
ramassage, cleanings, burnt cork,
corkwaste, boiled cork pieces and raw
corkwaste — Definitions and packaging
TC 92
Fire safety
ISO 5925*Fire tests — Smoke-control door and
1:2007/DAmd shutter assemblies — Part 1: Ambient1
and medium-temperature leakage tests
— Amendment 1
TC 94
and equipment
ISO/DIS
16900-6
Part 6: Mechanical resistance/strength of
components and connections
ISO/DIS
16900-14
Part 14: Measurement of sound level
TC 107
ISO/DIS
2063-1
*Thermal spraying — Metallic and other
inorganic coatings — Zinc, aluminium
and their alloys — Part 1: Planning of the
corrosion protection system —
Component design considerations and
quality requirements
ISO/DIS
2063-2
*Thermal spraying — Metallic and other
inorganic coatings — Zinc, aluminium
and their alloys — Part 2: Conditions for
execution of corrosion protection works
by thermal spray processes
ISO/DIS 8639 *Glass-reinforced thermosetting plastics
(GRP) pipes and fittings — Test methods
for leaktightness of flexible joints
TC 142
gases
ISO/DIS
16891
*Test methods for evaluating degradation
of properties of cleanable filter media
TC 153
Valves
ISO/DIS
17292
*Metal ball valves for petroleum,
petrochemical and allied industries
TC 156
ISO/DIS
6509-2
Determination of dezincification
resistance of copper alloys with zinc —
Part 2: Acceptance criteria
TC 160
Glass in building
75
ISO/DIS
16293-2
*Glass in building — Basic soda lime
silicate glass products — Part 2: Float
glass
ISO/DIS
16293-3
silicate glass products
— Part 3:
Polished wired glass
ISO/DIS
16293-4
silicate glass products — Part 4: Wired
patterned glass
ISO/DIS
16293-5
silicate glass products — Part 5:
Patterned glass
TC 164
ISO/DIS
18338
*Metallic materials — Torsion test at
ambient temperature
TC 171
ISO/DIS
18565
*Document management — AFP/Archive
TC 172
ISO/DIS
14132-1
*Optics and photonics — Vocabulary for
telescopic systems — Part 1: General
terms and alphabetical indexes of terms
in ISO 14132
TC 201
ISO/DIS
18337
*Surface chemical analysis — Surface
characterization measurement of the
lateral resolution of a confocal
fluorescence microscope
ISO/DIS
17109
*Surface chemical analysis — Depth
profiling — A method for sputter rate
determination in X-ray photoelectron
spectroscopy, Auger electron
spectroscopy and secondary-ion mass
spectrometry sputter depth profiling
using single andmulti-layer thin films
ISO/DIS
14707
*Surface chemical analysis — Glow
discharge optical emission spectrometry
(GD-OES) — Introduction to use
TC 204
ISO/DIS
11067
*Intelligent transport systems — Curve
speed warning systems (CSWS) —
procedures
TC 206
Fine ceramics
ISO/DIS
15733
Mechanical properties of ceramic
composites at ambient temperature in air
atmospheric pressure — Determination
of tensile properties
ISO/DIS
14132-2
telescopic systems — Part 2: Terms for
binoculars, monoculars and spotting
scopes
14132-2:2002/Cor 1:2006)
TC 247
ISO/DIS
10938
*Ophthalmic optics — Chart displays for
visual acuity measurements — Printed,
projected and electronic
ISO/DIS
34001.2
*Security Management System
TC 256
Pigments, dyestuffs and extenders
*Electro-optical systems — Cavity ringdown technique for high-reflectance
measurement
ISO/DIS
18451-1
*Pigments, dyestuffs and extenders —
Terminology — Part 1: General terms
ISO/DIS
18451-2
Terminology — Part 2: Classification of
colouring materials according to coloristic
and chemical aspects
ISO 7176*Wheelchairs — Part 19: Wheeled
19:2008/DAm mobility devices for use as seats in motor
d1
vehicles — Amendment 1: Annex G
ISO/DIS
18451-3
Terminology — Part 3: Particle size
TC 184
ISO/DIS
18473-1
ISO/DIS
8000-8
*Data quality — Part 8: Information and
data quality: Concepts and measuring
*Functional pigments and extenders for
special applications — Part 1: Nanoscale
calcium carbonate for sealant application
TC 199
Safety of machinery
ISO/DIS
18473-2
ISO/DIS
19353
*Safety of machinery — Fire prevention
and protection
*Functional pigments and extenders for
special applications — Part 2: Nanoscale
titanium dioxide for sunscreen
application
ISO/DIS
*Pigments and extenders — Methods of
ISO/DIS
13142
TC 173
disability
76
23900-1
dispersion and assessment of
dispersibility in plastics — Part 1:
General introduction
ISO/DIS
23900-2
Determination of colouristic properties
and ease of dispersion in plasticized
polyvinyl chloride by two-roll milling
ISO/DIS
23900-3
and ease of dispersion of black and
colour pigments in polyethylene by tworoll milling
ISO/DIS
23900-4
ISO/DIS
23900-5
and other characters
and ease of dispersion of white pigments
in polyethylene by two-roll milling
Determination by filter pressure value
test
ISO/DIS
23900-6
Determination by film test
TMBG
Technical Management Board groups
ISO/IEC
DGuide 71
Guide for addressing accessibility in
standards
(Revision of ISO/IEC Guide 71:2001)
IULTCS
ISO/DIS
19070
*Leather — Chemical determination of Nmethyl-2-pyrrolidone (NMP) in leather
ISO/DIS
19071
*Leather — Chemical tests —
Determination of Chromium (VI) and the
reductive potential for chromium tanning
agents
JTC 1
ISO/IEC DIS
19831
*Cloud Infrastructure Management
Interface (CIMI) Model and RESTful
HTTP-based Protocol — An Interface for
Managing Cloud Infrastructure
ISO/IEC
10646/DAmd
1
*Information technology — Universal
Coded Character Set (UCS) —
Amendment 1: Cherokee supplement
ISO/IEC DIS
15149-2
exchange between systems — Magnetic
field area network (MFAN) — Part 2: Inband Control Protocol for Wireless
Power Transfer
ISO/IEC DIS
14882
*Information technology — Programming
languages — C++
ISO/IEC DIS
16963
*Information technology — Digitally
recorded media for information
interchange and storage — Test method
for the estimation of lifetime of optical
disks for long-term data storage
ISO/IEC DIS
18014-4.2
Information technology — Security
techniques — Time-stamping services —
Part 4: Traceability of time sources
ISO/IEC DIS
29167-10
techniques — Part 10: Crypto suite AES128 security services for air interface
communications
ISO/IEC DIS
29167-12
techniques — Part 12: Crypto suite ECCDH security services for air interface
communication
ISO/IEC DIS
19785-3
*Information technology — Common
Biometric Exchange Formats Framework
— Part 3: Patron format specifications
ISO/IEC 19785-3:2007/Amd 1:2010)
ISO/IEC
197942:2011/DAmd
2
Finger minutiae data — Amendment 2:
XML encoding
ISO/IEC
197944:2011/DAmd
2
Finger image data — Amendment 2:
XML encoding
ISO/IEC DIS
29197.2
*Information technology — Evaluation
methodology for environmental influence
in biometric system performance
PROJETS FINALS
er
77
23125:2010/Amd 1:2012)
TC 17
TC 43
Steel
ISO/FDIS 362- *Measurement of noise emitted by
1
accelerating road vehicles — Engineering
method — Part 1: M and N categories
ISO/FDIS 630- *Structural steels — Part 5: Technical
5
delivery conditions for structural steels
with improved atmospheric corrosion
resistance
ISO/FDIS 683- *Heat-treatable steels, alloy steels and
18
free-cutting steels — Part 18: Bright steel
products
TC 22
Road vehicles
ISO/FDIS
16845-2
*Road vehicles — Controller area network
(CAN) — Conformance test plan — Part 2:
High-speed medium access unit with
selective wake-up functionality
ISO/FDIS
15007-1
*Road vehicles — Measurement of driver
visual behaviour with respect to transport
information and control systems — Part 1:
Definitions and parameters
TC 28
ISO/FDIS
10370
carbon residue — Micro method
10370:1993/Cor 1:1996)
TC 35
ISO/FDIS
13803
*Paints and varnishes — Determination of
haze on paint films at 20 degrees
TC 38
Textiles
ISO/FDIS 105- *Textiles — Tests for colour fastness —
B01
Part B01: Colour fastness to light: Daylight
(Revision of ISO 105-B01:1994, ISO 105B01:1994/Amd 1:1998)
Machine tools
ISO 230*Test code for machine tools — Part 10:
10:2011/FDAm Determination of the measuring
d 1.2
performance of probing systems of
numerically controlled machine tools —
Amendment 1: Measuring performance
with scanning probes
ISO/FDIS
23125
TC 44
ISO/FDIS
25980
*Health and safety in welding and allied
processes — Transparent welding
curtains, strips and screens for arc
welding processes
TC 46
ISO/FDIS
10160
*Information and documentation — Open
Systems Interconnection — Interlibrary
Loan Application Service Definition
10160:1997/Amd 1:2002)
ISO/FDIS
10161-1
Loan Application Protocol Specification —
Part 1: Protocol specification
10161-1:1997/Amd 1:2002, ISO 101611:1997/Amd 2:2002)
ISO/FDIS
10161-2
Loan Application Protocol Specification —
Part 2: Protocol implementation
conformance statement (PICS) proforma
TC 54
Essential oils
ISO/FDIS
16385
*Essential oil of molle (Schinus areira L.),
Argentinean type
TC 61
Plastics
ISO/FDIS
17541
*Plastics — Quantitative evaluation of
scratch-induced damage and scratch
visibility
ISO/FDIS
15512
*Plastics — Determination of water
content
ISO/FDIS
12000
*Plastics/rubber — Polymer dispersions
and rubber latices (natural and synthetic)
— Definitions and review of test methods
ISO/FDIS 2813 *Paints and varnishes — Determination of
gloss value at 20 degrees, 60 degrees
and 85 degrees
2813:1994/Cor 1:1997)
TC 39
Acoustics
ISO/FDIS 1887 *Textile glass — Determination of
combustible-matter content
*Machine tools — Safety — Turning
machines
ISO/FDIS
10122
78
*Reinforcement materials — Tubular
braided sleeves — Basis for a
specification
TC 84
ISO/FDIS
11070
*Sterile single-use intravascular
introducers, dilators and guidewires
TC 106
Dentistry
ISO/FDIS 9680 *Dentistry — Operating lights
ISO/FDIS
17730
*Dentistry — Fluoride varnishes
TC 108
ISO 20283*Mechanical vibration — Measurement of
4:2012/FDAmd vibration on ships — Part 4: Measurement
1
and evaluation of vibration of the ship
propulsion machinery — Amendment 1
ISO/FDIS
9308-1
*Water quality — Enumeration of
Escherichia coli and coliform bacteria —
Part 1: Membrane filtration method for
waters with low bacterial background flora
TC 160
Glass in building
ISO/FDIS
11485-3
*Glass in building — Curved glass — Part
3: Requirements for curved tempered and
curved laminated safety glass
TC 164
ISO/FDIS
6506-1
*Metallic materials — Brinell hardness test
— Part 1: Test method
ISO/FDIS
6506-2
— Part 2: Verification and calibration of
testing machines
TC 110
Industrial trucks
ISO/FDIS
6506-3
ISO/FDIS
22915-9
*Industrial Trucks — Verification of
stability — Part 9: Counterbalanced trucks
with mast handling freight containers of
6m (20 ft) length and longer
— Part 3: Calibration of reference blocks
ISO/FDIS
6506-4
— Part 4: Table of hardness values
TC 121
TC 172
ISO/FDIS
14490-6
*Optics and optical instruments — Test
methods for telescopic systems — Part 6:
Test methods for veiling glare index
ISO/FDIS
9345-2.2
*Microscopes — Imaging distances
related to mechanical reference planes —
Part 2: Infinity-corrected optical systems
IEC/FDIS
80601-2-58
Medical electrical equipment — Part 2-58:
Particular requirements for basic safety
and essential performance of lens removal
devices and vitrectomy devices for
ophthalmic surgery
(Revision of IEC 80601-2-58:2008)
TC 190
Soil quality
ISO/FDIS
16198
*Soil quality — Plant-based test to assess
the environmental bioavailability of trace
elements to plants
TC 193
Natural gas
ISO/FDIS
16960
*Natural gas — Determination of sulfur
compounds — Determination of total
sulfur by oxidative microcoulometry
method
TC 195
equipment
ISO/FDIS 5359 *Anaesthetic and respiratory equipment —
Low-pressure hose assemblies for use
with medical gases
5359:2008/Amd 1:2011)
ISO/FDIS
80601-2-70
*Medical Electrical Equipment — Part 270: Particular requirements for basic
safety and essential performance of sleep
apnoea breathing therapy equipment
TC 131
Fluid power systems
ISO/FDIS
16908
*Hydraulic filter element test methods —
Thermal conditioning and cold start-up
simulation
ISO/FDIS
10766
*Hydraulic fluid power — Cylinders —
Housing dimensions for rectangularsection-cut bearing rings for pistons and
rods
TC 146
Air quality
ISO/FDIS
22262-2
*Air quality — Bulk materials — Part 2:
Quantitative determination of asbestos by
gravimetric and microscopical methods
TC 147
Water quality
79
equipment — Concrete mixers — Part 2:
Procedure for examination of mixing
efficiency
TC 217
Cosmetics
ISO/FDIS
17516
*Cosmetics — Microbiology —
Microbiological limits
JTC 1
TC 198
ISO/FDIS
11140-1
*Sterilization of health care products —
Chemical indicators — Part 1: General
requirements
ISO/IEC FDIS *Information technology — Sensor
30128
networks — Generic Sensor Network
Application Interface
ISO/FDIS
18650-2
TC 206
Fine ceramics
ISO/FDIS
17942
advanced technical ceramics) — Methods
for chemical analysis of boron nitride
powders
ISO/FDIS
17947
for chemical analysis of fine silicon nitride
powders
TC 213
ISO/FDIS
2538-1.2
*Geometrical product specifications (GPS)
— Wedges — Part 1: Series of angles and
slopes
ISO/FDIS
2538-2.2
— Wedges — Part 2: Dimensioning and
tolerancing
ISO/FDIS 2692 *Geometrical product specifications (GPS)
— Geometrical tolerancing — Maximum
material requirement (MMR), least
material requirement (LMR) and
reciprocity requirement (RPR)
ISO/FDIS
16610-71
— Filtration — Part 71: Robust areal
filters: Gaussian regression filters
TC 215
Health informatics
ISO/IEEE FDIS *Health informatics — Personal health
11073-00103 device communication — Part 00103:
Overview
ISO/IEC FDIS *Information technology — Universal
10646
Coded Character Set (UCS)
(Revision of ISO/IEC 10646:2012,
ISO/IEC 10646:2012/Amd 1:2013,
ISO/IEC 10646:2012/FDAmd 2)
ISO/IEC FDIS *Information technology — Procedures for
9834-8
the operation of object identifier
registration authorities — Part 8:
Generation of universally unique identifiers
(UUIDs) and their use in object identifiers
ISO/IEC FDIS *Software engineering — Guidelines for
90003
the application of ISO 9001:2000 to
computer software
7811-1
technique — Part 1: Embossing
7811-6
High coercivity
ISO/IEC 7811-6:2008/Cor 1:2010)
7811-8
Coercivity of 51,7 kA/m (650 Oe)
18:2004/FDAm audio-visual objects — Part 18: Font
d1
compression and streaming —
Amendment 1: Updated semantics of
decoderSpecificInfo and font data
description for ISOBMFF
ISO/IEC FDIS *Information technology — User interfaces
24752-2
— Universal remote console — Part 2:
User interface socket description
ISO/IEEE FDIS *Health informatics — Personal health
11073-10441 device communication — Part 10441:
Device specialization — Cardiovascular
fitness and activity monitor
24752-4
Target description
ISO/IEEE FDIS *Health informatics — Point-of-care
11073-10442 medical device communication — Part
10442: Device specialization — Strength
fitness equipment
24752-5
Resource description
80
NORMES PUBLIEES
er
Nouvelles Normes internationales publiées entre le 1 mai
2014 et le 31 mai 2014.
anglais seulement
TC 2
Fasteners
ISO
21670:2014
Fasteners — Hexagon weld nuts with
flange
TC 6
ISO 126257:2014
Tissue paper and tissue products — Part
7: Determination of optical properties —
Measurement of brightness and colour
with D65/10° (outdoor daylight)
TC 17
Steel
ISO
15510:2014
*Stainless steels — Chemical composition
ISO 161431:2014
Part 1: Corrosion-resistant flat products
ISO 161432:2014
Part 2: Corrosion-resistant semi-finished
products, bars, rods and sections
ISO 161433:2014
Part 3: Wire
TC 20
ISO
11077:2014
*Aircraft ground equipment — De-icers —
Functional requirements
ISO
10788:2014
*Space systems — Lunar simulants
ISO
16457:2014
*Space systems — Space environment
(natural and artificial) — The Earth's
ionosphere model: international reference
ionosphere (IRI) model and extensions to
the plasmasphere
ISO
17255:2014
*Space systems — Programme
management — Statement of work
TC 21
fighting
ISO 72401:2014
1: General and definitions
ISO 618210:2014
test methods for domestic sprinklers
ISO 70765:2014
*Fire protection — Foam fire extinguishing
systems — Part 5: Fixed compressed air
foam equipment
TC 22
Road vehicles
ISO 88209:2014
Fuse-links with shortened tabs (Type K)
ISO 172152:2014
Service discovery and control
ISO 190722:2013
Road vehicles — Connection interface for
pyrotechnic devices, two-way and threeway connections — Part 2: Test methods
and general performance requirements
ISO
12345:2013
*Diesel engines — Cleanliness
assessment of fuel injection equipment
ISO 3468:2014 *Passenger cars — Windscreen defrosting
and demisting systems — Test method
ISO 124053:2014
Test specification for lithium-ion traction
battery packs and systems — Part 3:
Safety performance requirements
TC 23
and forestry
ISO
16399:2014
*Meters for irrigation water
ISO 117833:2014
Data link layer
TC 24
sieving
ISO 92762:2014
*Representation of results of particle size
analysis — Part 2: Calculation of average
particle sizes/diameters and moments
from particle size distributions
ISO 133221:2014
*Particle size analysis — Image analysis
methods — Part 1: Static image analysis
methods
TC 28
ISO 5163:2014 Petroleum products — Determination of
knock characteristics of motor and aviation
fuels — Motor method
ISO 5164:2014 Petroleum products — Determination of
knock characteristics of motor fuels —
Research method
TC 29
Small tools
ISO
16462:2014
Cubic boron nitride inserts, tipped or solid
— Dimensions, types
81
ISO
16463:2014
Polycristalline diamond inserts, tipped —
Dimensions, types
TC 30
conduits
ISO 40641:2014
*Water meters for cold potable water and
hot water — Part 1: Metrological and
technical requirements
ISO 40642:2014
hot water — Part 2: Test methods
ISO 40643:2014
hot water — Part 3: Test report format
ISO 40644:2014
hot water — Part 4: Non-metrological
requirements not covered in ISO 4064-1
ISO 19861:2014
Test conditions for surface grinding
machines with horizontal grinding wheel
spindle and reciprocating table — Testing
of the accuracy — Part 1: Machines with
table length of up to 1 600 mm
TC 42
Photography
ISO
18944:2014
*Imaging materials — Reflection colour
photographic prints — Test print
construction and measurement
TC 43
Acoustics
ISO
10844:2014
Acoustics — Specification of test tracks for
measuring noise emitted by road vehicles
and their tyres
ISO
11200:2014
Acoustics — Noise emitted by machinery
and equipment — Guidelines for the use
of basic standards for the determination of
emission sound pressure levels at a work
station and at other specified positions
ISO 101401:2010/Amd
2:2014
Part 1: Application rules for specific
products — Amendment 2: Rainfall sound
ISO 129991:2014
Acoustics — Determination and
application of measurement uncertainties
in building acoustics — Part 1: Sound
insulation
ISO 40645:2014
hot water — Part 5: Installation
requirements
TC 31
ISO 42501:2014
*Earth-mover tyres and rims — Part 1:
Tyre designation and dimensions
ISO 42502:2014
*Earth-mover tyres and rims — Part 2:
Loads and inflation pressures
ISO
20562:2014
Tyre valves — ISO core chambers No. 1,
No. 2, No. 3 and No. 4
TC 34
Food products
TC 45
ISO
11133:2014
Microbiology of food, animal feed and
water — Preparation, production, storage
and performance testing of culture media
ISO 2000:2014 Rubber, raw natural — Guidelines for the
specification of technically specified
rubber (TSR)
TC 38
Textiles
ISO 172991:2014
Textiles — Determination of deodorant
property — Part 1: General principle
ISO 2322:2014 Styrene-butadiene rubber (SBR) —
Emulsion- and solution-polymerized types
— Evaluation procedures
ISO 172992:2014
property — Part 2: Detector tube method
ISO 172993:2014
property — Part 3: Gas chromatography
method
ISO
10306:2014
Textiles — Cotton fibres — Evaluation of
maturity by the air flow method
ISO 139351:2014
seam rupture using the strip method
TC 39
Machine tools
ISO 149551:2014
Machine tools — Environmental
evaluation of machine tools — Part 1:
Design methodology for energy-efficient
machine tools
ISO 2393:2014 Rubber test mixes — Preparation, mixing
procedures
ISO 2476:2014 Butadiene rubber (BR) — Solutionpolymerized types — Evaluation
procedures
ISO/TS
16095:2014
Reclaimed rubber derived from products
containing mainly natural rubber —
Evaluation procedure
ISO/TS
16096:2014
Reclaimed isobutene-isoprene (IIR) rubber
— Evaluation procedure
ISO/TS
16097:2013
Vulcanized crumb rubber — Evaluation
procedures
TC 46
ISO
11620:2014
*Information and documentation — Library
performance indicators
82
TC 54
Essential oils
ISO/TS
210:2014
*Essential oils — General rules for
packaging, conditioning and storage
ISO/TS
211:2014
*Essential oils — General rules for
labelling and marking of containers
TC 59
ISO/TS
12720:2014
Sustainability in buildings and civil
engineering works — Guidelines on the
application of the general principles in ISO
15392
TC 60
Gears
ISO
14104:2014
Gears — Surface temper etch inspection
TC 61
Plastics
ISO
15985:2014
*Plastics — Determination of the ultimate
anaerobic biodegradation under highsolids anaerobic-digestion conditions —
Method by analysis of released biogas
ISO
17223:2014
*Plastics — Determination of yellowness
index and change in yellowness index
ISO 220076:2014
conductivity and thermal diffusivity — Part
6: Comparative method for low thermal
conductivities using a temperaturemodulation technique
ISO
13106:2014
*Plastics — Blow-moulded polypropylene
containers for packaging of liquid
foodstuffs
ISO 165251:2014
Adhesives — Test methods for isotropic
electrically conductive adhesives — Part
1: General test methods
ISO 165252:2014
2: Determination of electrical
characteristics for use in electronic
assemblies
ISO 165253:2014
6:2014
6: Determination of pendulum-type shear
impact
ISO 165257:2014
7: Environmental test methods
ISO 165258:2014
8: Electrochemical-migration test methods
ISO 165259:2014
9: Determination of high-speed signaltransmission characteristics
ISO
15114:2014
*Fibre-reinforced plastic composites —
Determination of the mode II fracture
resistance for unidirectionally reinforced
materials using the calibrated end-loaded
split (C-ELS) test and an effective crack
length approach
TC 67
industries
ISO
13354:2014
Shallow gas diverter equipment
ISO
19900:2013
General requirements for offshore
structures
TC 72
ISO
11676:2014
*Textile machinery and accessories —
Pattern disks and pattern chains for warp
knitting machines — Vocabulary and
symbols
TC 86
ISO
16345:2014
*Water-cooling towers — Testing and
rating of thermal performance
ISO 817:2014 *Refrigerants — Designation and safety
classification
3: Determination of heat-transfer
properties
TC 94
and equipment
4: Determination of shear strength and
electrical resistance using rigid-to-rigid
bonded assemblies
ISO/TS 16976- Respiratory protective devices — Human
6:2014
factors — Part 6: Psycho-physiological
effects
TC 96
Cranes
ISO 165255:2014
5: Determination of shear fatigue
ISO
17440:2014
*Cranes — General design — Limit states
and proof of competence of forged steel
hooks
ISO 16525-
TC 104
Freight containers
ISO 165254:2014
83
ISO 14961:2013
Series 1 freight containers — Specification
and testing — Part 1: General cargo
containers for general purposes
15397:2014
graphic paper properties
TC 138
TC 106
Dentistry
ISO
11499:2014
Dentistry — Single-use cartridges for local
anaesthetics
ISO 174841:2014
TC 108
*Plastics piping systems — Multilayer pipe
systems for indoor gas installations with a
maximum operating pressure up to and
including 5 bar (500 kPa) — Part 1:
Specifications for systems
TC 146
Air quality
ISO 20172:2007
Mechanical vibration and shock —
Resilient mounting systems — Part 2:
Technical information to be exchanged for
the application of vibration isolation
associated with railway systems
ISO 122195:2014
*Interior air of road vehicles — Part 5:
Screening method for the determination of
the emissions of volatile organic
compounds from vehicle interior parts and
materials — Static chamber method
ISO 1600027:2014
Indoor air — Part 27: Determination of
settled fibrous dust on surfaces by SEM
(scanning electron microscopy) (direct
method)
ISO 1600029:2014
Indoor air — Part 29: Test methods for
VOC detectors
ISO 6954:2000 Mechanical vibration — Guidelines for the
measurement, reporting and evaluation of
vibration with regard to habitability on
passenger and merchant ships
ISO 202832:2008
Mechanical vibration — Measurement of
vibration on ships — Part 2: Measurement
of structural vibration
ISO 202834:2012
propulsion machinery
ISO 1600031:2014
Indoor air — Part 31: Measurement of
flame retardants and plasticizers based on
organophosphorus compounds —
Phosphoric acid ester
ISO 1606316:2014
Calibration by Earth's gravitation
TC 150
ISO 131791:2014
ISO 26311:1997/Amd
1:2010
Evaluation of human exposure to wholebody vibration — Part 1: General
requirements — Amendment 1
Implants for surgery — Plasma-sprayed
unalloyed titanium coatings on metallic
surgical implants — Part 1: General
requirements
ISO/TS
17137:2014
ISO 26314:2001/Amd
1:2010
Evaluation of human exposure to wholebody vibration — Part 4: Guidelines for the
evaluation of the effects of vibration and
rotational motion on passenger and crew
comfort in fixed-guideway transport
systems — Amendment 1: .
*Cardiovascular implants and
extracorporeal systems — Cardiovascular
absorbable implants
TC 156
ISO 65091:2014
Corrosion of metals and alloys —
Determination of dezincification resistance
of copper alloys with zinc — Part 1: Test
method
TC 121
TC 161
ISO 80601-267:2014
and essential performance of oxygenconserving equipment
ISO 235515:2014
TC 130
Graphic technology
Particular requirements — Part 5: Manual
gas valves
ISO 126471:2013
Graphic technology — Process control for
Part 1: Parameters and measurement
methods
ISO 235531:2014
Safety and control devices for oil burners
and oil-burning appliances — Particular
requirements — Part 1: Automatic and
semi-automatic valves
TC 163
ISO
Hygrothermal performance of building
ISO
Graphic technology — Communication of
84
15758:2014
equipment and industrial installations —
Calculation of water vapour diffusion —
Cold pipe insulation systems
TC 164
ISO
17340:2014
Metallic materials — Ductility testing —
High speed compression test for porous
and cellular metals
TC 165
37137:2014
medical devices — Guidance for
absorbable implants
TC 198
ISO/TS
16775:2014
*Packaging for terminally sterilized
medical devices — Guidance on the
application of ISO 11607-1 and ISO
11607-2
Timber structures
TC 201
ISO
13910:2014
*Timber structures — Strength graded
timber — Test methods for structural
properties
ISO
11952:2014
ISO
17754:2014
*Timber structures — Test methods —
Torsional resistance of driving in screws
*Surface chemical analysis — Scanningprobe microscopy — Determination of
geometric quantities using SPM:
Calibration of measuring systems
TC 205
TC 171
ISO 142891:2012
*Document management applications —
Electronic document file format
enhancement for accessibility — Part 1:
Use of ISO 32000-1 (PDF/UA-1)
ISO 136121:2014
Heating and cooling systems in buildings
pump systems — Part 1: Design and
dimensioning
TC 172
ISO 136122:2014
ISO
17411:2014
Optics and photonics — Optical materials
and components — Test method for
homogeneity of optical glasses by laser
interferometry
Heating and cooling systems in buildings
pump systems — Part 2: Energy
calculation
TC 178
ISO 164845:2014
ISO 225591:2014
Safety requirements for lifts (elevators) —
Part 1: Global essential safety
requirements (GESRs)
*Building automation and control systems
(BACS) — Part 5: Data communication
protocol
ISO 164846:2014
TC 181
Safety of toys
*Building automation and control systems
(BACS) — Part 6: Data communication
conformance testing
ISO 81243:2010/Amd
1:2014
*Safety of toys — Part 3: Migration of
certain elements — Amendment 1
TC 206
Fine ceramics
ISO
17094:2014
TC 189
Ceramic tile
ISO 105458:2014
Ceramic tiles — Part 8: Determination of
linear thermal expansion
method for antibacterial activity of
under indoor lighting environment
ISO 130071:2014
Ceramic tiles — Grouts and adhesives —
Part 1: Terms, definitions and
specifications for adhesives
ISO
17140:2014
TC 190
Soil quality
composites at room temperature —
Determination of fatigue properties at
constant amplitude
ISO
17184:2014
Soil quality — Determination of carbon
and nitrogen by near-infrared
spectrometry (NIRS)
ISO
17861:2014
ISO/TR
18105:2014
*Soil quality — Detection of water soluble
chromium(VI) using a ready-to-use test-kit
method
Measurement method of spectral
transmittance of fine ceramics thin films
under humid condition
TC 194
Biological evaluation of medical
devices
ISO
18061:2014
ISO/TR
*Cardiovascular biological evaluation of
*Fine Ceramics (Advanced Ceramics,
Advanced Technical Ceramics) —
Determination of antiviral activity of
— Test method using bacteriophage Q-
85
beta
19476:2014
illuminance meters and luminance meters
TC 207
Environmental management
TMBG
ISO/TS
14071:2014
*Environmental management — Life cycle
assessment — Critical review processes
and reviewer competencies: Additional
requirements and guidelines to ISO
14044:2006
ISO Guide
82:2014
Guidelines for addressing sustainability in
standards
JTC 1
ISO/IEC
19099:2014
*Information technology — Virtualization
Management Specification
ISO/IEC
25051:2014
Software engineering — Systems and
software Quality Requirements and
Evaluation (SQuaRE) — Requirements for
quality of Ready to Use Software Product
(RUSP) and instructions for testing
TC 215
Health informatics
ISO/IEEE
1107310103:2014
device, cardiac
ISO/IEEE
1107310417:2014
ISO/IEEE
1107310418:2014
ISO/IEEE
1107330200:2004
30200: Transport profile — Cable
connected
ISO
18104:2014
Health informatics — Categorial structures
for representation of nursing diagnoses
and nursing actions in terminological
systems
3:2011/Amd
6:2014
Amendment 6: Bit rates of 3fc/4, fc, 3fc/2
and 2fc from PCD to PICC
ISO/IEC
1989:2014
TC 220
Cryogenic vessels
ISO
21010:2014
*Cryogenic vessels — Gas/materials
compatibility
TC 229
Nanotechnologies
ISO/TR
16197:2014
*Nanotechnologies — Compilation and
description of toxicological screening
methods for manufactured nanomaterials
ISO/TS
16550:2014
*Nanotechnologies — Determination of
silver nanoparticles potency by release of
muramic acid from Staphylococcus aureus
TC 232
Learning services outside formal
education
ISO
29991:2014
Language learning services outside formal
education — Requirements
TC 268
Sustainable development in
communities
ISO
37120:2014
*Sustainable development of communities
— Indicators for city services and quality
of life
TC 274
Light and lighting
ISO/CIE
Characterization of the performance of
languages, their environments and system
software interfaces — Programming
language COBOL
ISO/IEC 29145- *Information Technology - Wireless
2:2014
network services — Part 2: MAC Layer
ISO/IEC 29145- *Information technology - Wireless
3:2014
network services — Part 3: NWK Layer
1:2013/Amd
1:2014
Amendment 1: Extensions for simplified
carriage of MPEG-4 over MPEG-2
ISO/IEC 23000- *Information technology - Multimedia
13:2014
application format (MPEG-A) — Part 13:
Augmented reality application format
ISO/IEC 23001- *Information technology — MPEG
9:2014
systems technologies — Part 9: Common
encryption of MPEG-2 transport streams
ISO/IEC 23007- *Information technology — Rich media
1:2010/Amd
user interfaces — Part 1: Widgets —
1:2012/Cor
Amendment 1: Widget extensions —
2:2014
ISO/IEC 23008- *Information technology — High efficiency
1:2014
coding and media delivery in
MPEG media transport (MMT)
ISO/IEC 23009- *Information technology — Dynamic
1:2014
adaptive streaming over HTTP (DASH) —
Part 1: Media presentation description and
86
segment formats
ISO/IEC 23009- *Information technology — Dynamic
2:2014
adaptive streaming over HTTP (DASH) —
Part 2: Conformance and reference
software
ISO/IEC TS
11581-41:2014 icons — Part 41: Data structure to be used
by the ISO/IEC JTC 1/SC 35 icon
database
ISO 1585910:2004
(reconfirmed)
ISO 1585911:2004
(reconfirmed)
ISO 1585912:2004
(reconfirmed)
ISO 1585913:2004
(reconfirmed)
TC 25
NORMES CONFIRMEES
ans:
TC 12
Quantities and units
IEC 8000014:2008
TC 17
Steel
TC 28
TC 31
ISO 104992:1998
(reconfirmed)
TC 34
Food products
ISO
10153:1997
(reconfirmed)
ISO
17053:2005
(reconfirmed)
TC 20
ISO
13580:2005
(reconfirmed)
ISO
13969:2003
(reconfirmed)
ISO
14675:2003
(reconfirmed)
ISO
11241:1994
(reconfirmed)
ISO/TS
15495:2010
ISO 158591:2004
(reconfirmed)
ISO
16305:2005
(reconfirmed)
ISO 158592:2004
(reconfirmed)
ISO
17189:2003
(reconfirmed)
ISO 158593:2004
(reconfirmed)
ISO
18330:2003
(reconfirmed)
ISO 158594:2004
(reconfirmed)
ISO/TS
22117:2010
ISO 158595:2004
(reconfirmed)
TC 35
ISO 158596:2004
(reconfirmed)
ISO 81301:1992
ISO 158597:2004
(reconfirmed)
ISO 81302:1992
ISO 158598:2004
(reconfirmed)
ISO 81303:1992
ISO 158599:2004
(reconfirmed)
ISO 81304:1992
ISO 8130-
87
5:1992
ISO 81306:1992
ISO 81307:1992
ISO 81308:1994
(reconfirmed)
ISO 77111:1997
(reconfirmed)
TC 108
ISO 81309:1992
ISO 813010:1998
ISO 813011:1997
ISO 813012:1998
TC 114
Horology
ISO
10553:2003
(reconfirmed)
TC 122
Packaging
ISO
16103:2005
(reconfirmed)
TC 131
Fluid power systems
ISO 813013:2001
ISO 813014:2004
TC 46
ISO 38231:1997
ISO 230812:2009
TC 138
ISO 62592:1997
(reconfirmed)
ISO
10146:1997
(reconfirmed)
TC 48
ISO 86556:2002
(reconfirmed)
ISO
13955:1997
(reconfirmed)
ISO 86557:2005
(reconfirmed)
ISO
16241:2005
(reconfirmed)
TC 61
Plastics
TC 146
Air quality
ISO 10434:1998
(reconfirmed)
TC 153
TC 162
ISO
15039:2003
(reconfirmed)
TC 76
Doors and windows
ISO 114184:2005
(reconfirmed)
TC 94
and equipment
TC 106
Valves
Dentistry
TC 170
Surgical instruments
ISO 71531:1991
(reconfirmed)
TC 184
88
ISO 94092:2002
(reconfirmed)
ISO/PAS
26183:2006
TC 108
ISO 53475:1993
ISO 95061:2003
(reconfirmed)
TC 121
(reconfirmed)
ISO
18779:2005
(replaced by ISO 80601-2-67:2014)
ISO 95062:2003
ISO 132812:2000
(reconfirmed)
ISO
14258:1998
(reconfirmed)
ISO 157451:2003
(reconfirmed)
TC 215
Health informatics
ISO
11238:2012
TC 219
Floor coverings
ISO
11377:1997
(reconfirmed)
JTC 1
ISO/IEC 88252:2008
NORMES ANNULEES
er
TC 22
Road vehicles
ISO 3470:1989 (replaced by ISO 3468:2014)
TC 34
Food products
ISO/TS 11133- (replaced by ISO 11133:2014)
1:2009
2:2003
2:2003/Amd
1:2011
TC 43
Acoustics
ISO 14018:2006
(replaced by ISO 10140-1:2010/Amd
2:2014, ISO 10140-5:2010/Amd 1:2014)
89
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 juin 2014 au 30 juin 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
IIW
ISO/DIS
14270
*Resistance welding — Destructive
testing of welds — Specimen dimensions
and procedure for mechanized peel
testing resistance spot, seam and
embossed projection welds
ISO/DIS
14272.2
and procedure for cross tension testing
of resistance spot and embossed
projection welds
ISO/DIS
14273.2
and procedure for tensile shear testing
resistance spot, seam and embossed
projection welds
TC 8
ISO/DIS
16706
evacuation systems — Load calculations
and testing
TC 17
Steel
ISO/DIS 437
*Steel and cast iron — Determination of
total carbon content — Combustion
gravimetric method
Nieuwe publicaties
Frans.
ISO/DIS 4939 *Steel and cast iron — Determination of
nickel content — Dimethylglyoxime
spectrophotometric method
ISO/DIS 4946 *Steel and cast iron — Determination of
copper content — 2,2'-Diquinolyl
ISO/DIS 4969 *Steel — Etching method for
macroscopic examination
90
ISO/DIS
17577
*Steel — Ultrasonic testing for steel flat
products of thickness equal to or greater
than 6 mm
ISO/DIS
18203
*Steels — Determination of the thickness
of surface-hardened layers
4970:1979, ISO 2639:2002)
ISO/DIS
6935-2
*Steel for the reinforcement of concrete
— Part 2: Ribbed bars
TC 22
Road vehicles
ISO/DIS
15031-5
ISO/DIS
6579-1
*Microbiology of the food chain —
Horizontal method for the detection,
enumeration and serotyping of
Salmonella — Part 1: Horizontal method
for the detection of Salmonella spp.
6579:2002/Cor 1:2004, ISO
6579:2002/Amd 1:2007)
ISO/DIS
21528-1
Horizontal methods for the detection and
enumeration of Enterobacteriaceae —
Part 1: Detection of Enterobacteriaceae
*Road vehicles — Communication
5: Emissions-related diagnostic services
ISO/DIS
21528-2
Horizontal methods for the detection and
enumeration of Enterobacteriaceae —
Part 2: Colony-count method
ISO/DIS
15031-6
Road vehicles — Communication
6: Diagnostic trouble code definitions
TC 35
ISO/DIS
4628-1
ISO/DIS
13948-1
*Diesel engines — Fuel injection pumps
and fuel injector — Part 1: Threaded
connections
*Paints and varnishes — Evaluation of
degradation of coatings — Designation
of quantity and size of defects, and of
intensity of uniform changes in
appearance — Part 1: General
introduction and designation system
TC 23
ISO/DIS
4628-2
ISO/DIS
17989-1
and forestry — Sustainability — Part 1:
Principles
appearance — Part 2: Assessment of
degree of blistering
ISO/DIS
22401
*Equipment for crop protection —
Method for measurement of potential drift
from horizontal boom sprayer systems by
the use of a test bench
ISO/DIS
4628-3
ISO/DIS
13460-1
Agricultural irrigation equipment —
Plastics saddles — Part 1: Polyethylene
pressure pipes
degree of rusting
ISO/DIS
4628-4
degree of cracking
ISO/DIS
4628-5
degree of flaking
TC 31
ISO/DIS
23671
*Passenger car tyres — Method for
measuring relative wet grip performance
— Loaded new tyres
TC 33
Refractories
ISO/DIS
22016
*Determination of sulfur in refractory
products and raw materials by
gravimetric, photometric and titrimetric
methods
TC 34
Food products
91
ISO/DIS
4628-7
ISO/DIS
4628-10
degree of chalking by velvet method
degree of filiform corrosion
TC 38
Textiles
ISO/DIS
17751-1
*Textiles — Quantitative analysis of
cashmere, wool, other specialty animal
fibers and their blends — Part 1: Light
Microscopy method
ISO/DIS
17751-2
ISO/DIS
18080-2
*Textiles — Quantitative analysis of
cashmere, wool, other specialty animal
fibers and their blends — Part 2:
Scanning Electron Microscopy method
*Textiles — Test methods for evaluating
the electrostatic propensity of fabrics —
Part 2: Test method using rotary
mechanical friction
ISO/DIS
18080-3
Part 3: Test method using manual friction
ISO/DIS
18080-4
Part 4: Test method using horizontal
mechanical friction
ISO/DIS
18066
*Textiles — Manmade filament yarns —
Determination of shrinkage in
16283-3
sound insulation in buildings and of
building elements — Part 3: Façade
sound insulation
TC 45
ISO/DIS
13775-1
*Thermoplastic tubing and hoses for
automotive use — Part 1: Non-fuel
applications
ISO/DIS
19013-2
*Rubber hoses and tubing for fuel circuits
for internal combustion engines —
Specification — Part 2: Gasoline fuels
ISO/DIS
19043
*Rubber latex — Determination of total
phosphate content in latex by
TC 54
Essential oils
ISO/DIS
18321
*Essential oils — Determination of
peroxide value
TC 58
Gas cylinders
ISO/DIS
14456
*Gas cylinders — Gas properties and
associated classification (FTSC) codes
TC 61
Plastics
ISO/DIS
22007-2.2
conductivity and thermal diffusivity —
Part 2: Transient plane heat source (hot
disc) method
ISO/DIS 1922 *Rigid cellular plastics — Determination
of shear strength
TC 67
industries
ISO/DIS
16440
Pipeline transportation systems —
Design, construction and maintenance of
steel cased pipelines
ISO/DIS
21809-3
External coatings for buried or
submerged pipelines used in pipeline
transportation systems — Part 3: Field
joint coatings
21809-3:2008/Amd 1:2011)
boiling water
ISO/DIS
18067
*Textiles — Synthetic filament yarns —
Determination of shrinkage rate in dry
and hot air (after treatment)
TC 41
ISO/DIS 9563 *Belt drives — Electrical conductivity of
antistatic endless synchronous belts —
Characteristics and test method
TC 42
Photography
ISO/DIS
18383
Specification guideline
TC 68
Financial services
TC 43
Acoustics
ISO/DIS
18774
ISO/DIS
*Acoustics — Field measurement of
*Securities and related financial
instruments — Financial Instrument
Short Name (FISN)
92
TC 70
ISO/DIS
4548-14
*Methods of test for full-flow lubricating
oil filters for internal combustion engines
— Part 14: Cold start simulation and
hydraulic pulse durability for composite
filter housings
TC 71
ISO/DIS
1920-12.2
*Testing of concrete — Part 12:
Determination of the carbonation
resistance of concrete — Accelerated
carbonation method
and bush chains, attachments and
associated chain sprockets
606:2004/Cor 1:2006)
ISO/DIS 4347 *Leaf chains, clevises and sheaves —
Dimensions, measuring forces and
tensile strengths
ISO/DIS
15654
*Fatigue test method for transmission
precision roller chains
TC 106
Dentistry
ISO/DIS
17785-1
*Test Methods for Pervious Concrete —
Part 1: Infiltration rate
ISO/DIS
15912
TC 76
*Dentistry — Refractory investment and
die material
15912:2006/Amd 1:2011)
TC 108
ISO/DIS
16063-32
Resonance testing — Testing the
frequency and the phase response of
accelerometers by means of shock
excitation
TC 110
Industrial trucks
ISO/DIS
3691-2
*Industrial trucks — Safety requirements
and verification — Part 2: Self-propelled
variable-reach trucks
ISO 8362*Injection containers and accessories —
1:2009/DAmd Part 1: Injection vials made of glass
1
tubing — Amendment 1
TC 85
ISO/ASTM
DIS 51608
Practice for dosimetry in an X-ray
(bremsstrahlung) facility for radiation
processing at energies between 50 keV
and 7.5 MeV
(Revision of ISO/ASTM 51608:2005)
ISO/ASTM
DIS 51649
Practice for dosimetry in an electron
beam facility for radiation processing at
energies between 300 keV and 25 MeV
ISO/DIS
11525-4.2
ISO/ASTM
DIS 51707
Guide for estimation of measurement
uncertainty in dosimetry for radiation
processing
*Rough-terrain trucks — User
requirements — Part 4: Additional
requirements for variable-reach trucks
handling freely suspended loads
ISO/DIS
18479-2.2
*Rough-terrain trucks — Non-integrated
personnel work platforms — Part 2: User
requirements
TC 89
Wood-based panels
TC 111
ISO/DIS
12460-4
*Wood-based panels — Determination of
formaldehyde release — Part 4:
Desiccator method
12460-4:2008/Amd 1:2011)
ISO
*Forged steel eyebolts grade 4 for
3266:2010/DA general lifting purposes — Amendment 1
md 1
TC 92
Fire safety
TC 127
ISO/DIS
5660-4
*Reaction-to-fire tests — Heat release,
smoke production and mass loss rate —
Part 4: Measurement of heat release for
determination of low levels of
combustibility
ISO/DIS
15818.2
*Earth-moving machinery — Lifting and
tying-down attachment points —
Performance requirements
TC 142
gases
TC 100
Chains and chain sprockets for power
transmission and conveyors
ISO/DIS
15858
*UV-C Devices — Safety information —
Permissible human exposure
ISO/DIS 606
*Short-pitch transmission precision roller
93
TC 147
Water quality
ISO/DIS
13165-3
*Water quality — Radium-226 — Part 3:
Test method using coprecipitation and
gamma-spectrometry
TC 153
Valves
ISO/DIS
28921-2
*Industrial valves — Isolating valves for
low-temperature applications — Part 2:
Type testing
TC 182
Geotechnics
ISO/DIS
17892-3
— Laboratory testing of soil — Part 3:
Determination of particle density
(Revision of ISO/TS 17892-3:2004,
ISO/TS 17892-3:2004/Cor 1:2006)
ISO/DIS
17892-4
ISO/DIS
1938-2
(GPS) — Dimensional measuring
equipment — Part 2: Reference disk
gauges
ISO/DIS
10360-10.2
(GPS) — Acceptance and reverification
tests for coordinate measuring systems
(CMS) — Part 10: Laser trackers for
measuring point-to-point distances
ISO/DIS
18391
*Geometrical product specification (GPS)
— Population specification
TC 219
Floor coverings
ISO/DIS 4918 *Resilient, textile and laminate floor
coverings — Castor chair test
— Laboratory testing of soil — Part 4:
Determination of particle size distribution
ISO/TS 17892-4:2004/Cor 1:2006)
TC 221
Geosynthetics
ISO/DIS
9863-1
*Geosynthetics — Determination of
thickness at specified pressures — Part
1: Single layers
TC 254
amusement devices
ISO/DIS
17842-3
amusement devices — Part 3:
Requirements for inspection during
design, manufacture, operation and use
*Industrial automation systems and
integration — Diagnostics, capability
assessment and maintenance
applications integration — Part 3:
Applications integration description
method
TC 258
Project, programme and portfolio
management
ISO/DIS
21502
*Project and Programme Portfolio
Management
JTC 1
TC 204
ISO/DIS
15784-2.2
Intelligent transport systems — Data
exchange involving roadside
ISO/IEC DIS
19845
Business Language Version 2.1 (UBL
v2.1)
ISO/IEC DIS
26300-1
Document Format for Office Applications
(OpenDocument) v1.2 — Part 1:
OpenDocument Schema
ISO/IEC 26300:2006/Cor 1:2010,
ISO/IEC 26300:2006/Cor 2:2011,
ISO/IEC 26300:2006/Amd 1:2012)
ISO/IEC DIS
26300-2
Recalculated Formula (OpenFormula)
Format
ISO/IEC 26300:2006/Cor 1:2010,
ISO/IEC 26300:2006/Cor 2:2011,
ISO/IEC 26300:2006/Amd 1:2012)
TC 184
ISO/DIS
10303-21
*Industrial automation systems and
integration — Product data
representation and exchange — Part 21:
Implementation methods: Clear text
encoding of the exchange structure
ISO/DIS
18435-3
modules communication — Part 2:
Centre to field device communications
using SNMP
ISO/DIS
18495
*Intelligent transport systems — New
manufactured vehicles visibility in the
supply chain
TC 212
Clinical laboratory testing and in vitro
diagnostic test systems
ISO/DIS
16782
*Clinical laboratory testing - Criteria for
acceptable lots of dehydrated MuellerHinton agar and broth for antimicrobial
susceptibility testing
TC 213
94
ISO/IEC DIS
26300-3
5:2003/DAmd software — Part 5: — Amendment 2
2
Packages
ISO/IEC 26300:2006/Cor 1:2010,
ISO/IEC 26300:2006/Cor 2:2011,
ISO/IEC 26300:2006/Amd 1:2012)
ISO/IEC
*Information technology — International
14651:2011/D string ordering and comparison —
Amd 2
Method for comparing character strings
and description of the common template
tailorable ordering — Amendment 2
ISO/IEC DIS
15938-13
*Information technology — Multimedia
content description interface — Part 13:
Compact descriptors for visual search
ISO/IEC DIS
18477-2
*Information technology — Information
Technology: Scalable Compression and
Coding of Continuous-Tone Still Images
— Part 2: Extensions for High Dynamic
Range Images
ISO/IEC
230091:2014/DAmd
1
*Information technology — Dynamic
adaptive streaming over HTTP (DASH)
— Part 1: Media presentation description
and segment formats — Amendment 1:
High Profile and Availability Time
Synchronization
ISO/IEC DIS
29500-3
*Information technology — Document
description and processing languages —
Office Open XML File Formats — Part 3:
Markup Compatibility and Extensibility
ISO/IEC DIS
24748-4
Life cycle management — Part 4:
Systems engineering planning — Part 4:
ISO/IEC
103736/DAmd 2
*Identification cards — Test methods —
Part 6: Proximity cards — Amendment 2:
Extension of PICC and PCD test
methods
ISO/IEC
156933:2009/DAmd
3
integrated circuit cards — Vicinity cards
— Part 3: Anticollision and transmission
protocol — Amendment 3: Extended
VICC memory organisatio
ISO/IEC DIS
17960
languages, their environments and
system software interfaces — Code
signing for source code
ISO/IEC DIS
14543-4-3
*Information technology — Home
Electronic Systems (HES) — Part 4-3:
Application layer — light version for
network enhanced control devices of
HES Class 1
TC 2
Fasteners
ISO/FDIS
10664
*Hexalobular internal driving feature for
bolts and screws
ISO/IEC DIS
14543-5-7
*Information technology — Home
electronic system (HES) architecture —
Part 5-7: Intelligent Grouping and 3
Resource Sharing — Remote Access
System Architecture
TC 4
Rolling bearings
ISO/FDIS
3290-1.2
*Rolling bearings — Balls — Part 1: Steel
balls
ISO/IEC DIS
30129
*Application of equipotential bonding and
earthing in buildings with information
technology equipment
ISO/PRF 3290- *Rolling bearings — Balls — Part 2:
2.2
Ceramic balls
ISO/IEC DIS
17991
equipment — Method for Measuring
Scanning Productivity of Digital
Multifunctional Devices
TC 17
ISO/IEC
138181:2013/DAmd
6
*Information technology — Generic
coding of moving pictures and
associated audio information — Part 1:
Systems — Amendment 6
ISO/IEC
15444-
image coding system: Reference
PROJETS FINALS
er
Steel
ISO/FDIS 630- *Structural steels — Part 6: Technical
6
delivery conditions for seismic improved
structural steels for building
ISO/FDIS 683- *Heat-treated steels, alloy steels and free17
cutting steels — Part 17: Ball and roller
bearing steels
95
TC 20
ISO/FDIS 7169 *Aerospace — Separable tube fittings for
fluid systems, for 24 degree cones, for
pressures up to 3 000 psi or 21 000 kPa
— Procurement specification, inch/metric
TC 22
Road vehicles
ISO/FDIS
11451-1
*Road vehicles — Vehicle test methods
for electrical disturbances from
narrowband radiated electromagnetic
energy — Part 1: General principles and
terminology
11451-1:2005/Amd 1:2008)
17196
Determination of impurities — Gas
ISO/FDIS
17197
Determination of water content — Karl
Fischer titration method
ISO/FDIS
17786
Determination of high temperature (105°)
evaporation residues — Mass analysis
method
TC 29
Small tools
ISO/FDIS 6103 *Bonded abrasive products — Permissible
unbalances of grinding wheels as
delivered — Static testing
TC 23
and forestry
ISO/FDIS
16122-1
*Agricultural and forestry machinery —
Inspection of sprayers in use — Part 1:
General
ISO/FDIS
16122-2
Horizontal boom sprayers
ISO/FDIS
16122-3
Sprayers for bush and tree crops
ISO/FDIS
9635-1
*Agricultural irrigation equipment —
Irrigation valves — Part 1: General
requirements
ISO/FDIS
9635-2
Irrigation valves — Part 2: Isolating valves
ISO/FDIS
9635-3
Irrigation valves — Part 3: Check valves
ISO/FDIS
9635-4
Irrigation valves — Part 4: Air valves
ISO/FDIS
11783-7
Implement messages application layer
TC 31
ISO/FDIS
14960-1
*Tubeless tyres — Valves and
components — Part 1: Test methods
ISO/FDIS
14960-2
*Tubeless tyres — Valves and
components — Part 2: Clamp-in tubeless
tyre valve-test method
TC 34
Food products
ISO/FDIS
12228-2
*Determination of individual and total
method — Part 2: Olive oils and olive
pomace oils
ISO/FDIS
12966-1
Gas chromatography of fatty acid methyl
esters — Part 1: Guidelines on modern
gas chromatography of fatty acid methyl
esters
15304:2002)
ISO/FDIS 2451 Cocoa beans — Specification
TC 24
sieving
ISO/FDIS
13317-4
*Determination of particle size distribution
by gravitational liquid sedimentation
methods — Part 4: Balance method
TC 28
ISO/FDIS
TC 37
content resources
ISO/FDIS
13611
*Interpreting — Guidelines for community
interpreting
TC 38
Textiles
ISO/FDIS 675 *Textiles — Woven fabrics —
Determination of dimensional change on
commercial laundering near the boiling
point
675:1979/Cor 1:1990)
TC 45
ISO/FDIS
*Rubber hoses and hose assemblies for
dispensing liquefied petroleum gases
96
11759
(LPGs) — Specification
respiratory pressures
TC 106
Dentistry
ISO
*Flexible and rigid cellular polymeric
2440:1997/FDA materials — Accelerated ageing tests —
md 2
Amendment 2
ISO/FDIS
13116
*Dentistry — Test Method for Determining
Radio-Opacity of Materials
TC 46
TC 110
Industrial trucks
ISO/FDIS
17316
Information and documentation —
International standard link identifier (ISLI)
ISO/FDIS
11525-5
TC 61
Plastics
*Rough-terrain trucks — User
requirements — Part 5: Interface between
rough-terrain truck and integrated
personnel work platform
ISO/FDIS
17855-1
*Plastics — Polyethylene (PE) moulding
and extrusion materials — Part 1:
specifications
TC 113
Hydrometry
ISO/FDIS
19066-1
*Plastics — Methyl methacrylateacrylonitrile-butadiene-styrene (MABS)
specifications
TC 127
ISO/FDIS
17253
*Earth-moving machinery and roughterrain variable-reach trucks — Design
requirements for machines intended to be
driven on road
TC 67
industries
ISO/FDIS
19901-8
Specific requirements for offshore
structures — Part 8: Marine soil
Investigations
TC 69
ISO/FDIS
17258
*Statistical methods — Six Sigma — Basic
criteria underlying benchmarking for Six
Sigma in organisations
TC 85
ISO/FDIS
16641
ISO/FDIS 4375 *Hydrometric determinations — Cableway
systems for stream gauging
ISO/FDIS 8812 *Earth-moving machinery — Backhoe
loaders — Definitions and commercial
specifications
TC 130
Graphic technology
ISO/FDIS
12647-5
the manufacture of half-tone colour
Part 5: Screen printing
ISO/FDIS
15339-2
*Graphic technology — Printing from
digital data across multiple technologies
— Part 2: Characterized reference printing
conditions, CRPC1 - CRPC7
TC 150
*Measurement of radioactivity in the
environment — Air — Radon 220:
Integrated measurement methods for the
determination of the average activity
concentration using passive solid-state
nuclear track detectors
ISO/FDIS 8828 Implants for surgery — Guidance on care
and handling of orthopaedic implants
TC 86
ISO/FDIS
16494
*Heat recovery ventilators and energy
recovery ventilators — Method of test for
performance
ISO/FDIS 7439 *Copper-bearing contraceptive intrauterine
devices — Requirements and tests
TC 94
ISO/FDIS
16900-12
TC 157
TC 172
and equipment
ISO/FDIS
9022-4
*Optics and photonics — Environmental
test methods — Part 4: Salt mist
Part 12: Determination of volumeaveraged work of breathing and peak
ISO/FDIS
14132-3
telescopic sights
97
ISO/FDIS
14132-4
by test chamber method under indoor
lighting environment — Part 1: Removal of
formaldehyde
astronomical telescopes
TC 218
Timber
ISO/FDIS
13061-1
*Physical and mechanical properties of
wood — Test methods for small clear
specimens — Part 1: Determination of
moisture content for physical and
mechanical tests
ISO/FDIS
13061-2
density for physical and mechanical tests
TC 221
Geosynthetics
ISO/FDIS
13427
*Geosynthetics — Abrasion damage
simulation (sliding block test)
TC 184
ISO/FDIS
22400-1
Key performance indicators (KPIs) for
manufacturing operations management —
Part 1: Overview, concepts and
terminology
TC 188
Small craft
ISO/FDIS
10239
*Small craft — Liquefied petroleum gas
(LPG) systems
ISO/FDIS
13297
*Small craft — Electrical systems —
Alternating current installations
TC 189
Ceramic tile
ISO/FDIS
10545-1
*Ceramic tiles — Part 1: Sampling and
basis for acceptance
TC 223
Societal security
ISO/FDIS
22315
*Societal security — Mass evacuation —
Guidelines for planning
TC 194
Biological and clinical evaluation of
medical devices
JTC 1
ISO/FDIS
10993-3
*Biological evaluation of medical devices
— Part 3: Tests for genotoxicity,
carcinogenicity and reproductive toxicity
TC 202
Microbeam analysis
ISO/FDIS
14594
microanalysis — Guidelines for the
determination of experimental parameters
for wavelength dispersive spectroscopy
14594:2003/Cor 1:2009)
ISO/FDIS
14595
microanalysis — Guidelines for the
specification of certified reference
materials (CRMs)
14595:2003/Cor 1:2005)
TC 206
Fine ceramics
ISO/FDIS
17138
composites at room temperature —
Determination of flexural strength
ISO/FDIS
18560-1
29182-7
Architecture (SNRA) — Part 7:
Interoperability guidelines
30101
networks: Sensor network and its
interfaces for smart grid system
ISO/IEC FDIS *Identification cards — Test methods —
10373-2
Part 2: Cards with magnetic stripes
ISO/IEC 10373-2:2006/Cor 1:2010)
ISO/IEC 23000- Information technology — Multimedia
11:2009/FDAm application format (MPEG-A) — Part 11:
d3
Stereoscopic video application format —
Amendment 3: Support movie fragment for
Stereoscopic Video AF
15459-1
— Unique identification — Part 1:
Individual transport units
method for air-purification performance of
15459-2
Registration procedures
98
15459-3
Common rules
15459-4
Individual products and product packages
15459-5
Individual returnable transport items
(RTIs)
15459-6
Groupings
NORMES PUBLIEES
*Space data and information transfer
systems — Data transmission and
pseudo-random noise (PN) ranging for 2
GHz code division multiple access
(CDMA) link via data relay satellite
ISO
19389:2014
systems — Conjunction data message
TC 21
fighting
ISO 724015:2014
15: Point-type fire detectors using smoke
and heat sensors
TC 22
Road vehicles
ISO 190721:2014
*Road vehicles — Connection interface for
pyrotechnic devices, two-way and threeway connections — Part 1: Pocket
interface definition
ISO 2575:2010/ *Road vehicles — Symbols for controls,
Amd 3:2014
indicators and tell-tales — Amendment 3
ISO 126191:2014
1: General requirements and definitions
ISO 126192:2014
2: Performance and general test methods
ISO 126193:2014
3: Pressure regulator
ISO
16380:2014
*Road vehicles — Blended fuels refuelling
connector
TC 24
sieving
ISO 130993:2014
*Colloidal systems — Methods for zeta
potential determination — Part 3: Acoustic
methods
TC 29
Small tools
er
Nouvelles Normes internationales publiées entre le 1 juin
2014 et le 30 juin 2014.
anglais seulement
TC 2
Fasteners
ISO
10683:2014
Fasteners — Non-electrolytically applied
zinc flake coatings
TC 6
ISO 2759:2014 Board — Determination of bursting
strength
TC 8
ISO 173251:2014
environment protection — Oil booms —
Part 1: Design requirements
TC 17
Steel
ISO 4998:2014 *Continuous hot-dip zinc-coated and zinciron alloy-coated carbon steel sheet of
structural quality
TC 20
ISO
17808:2014
systems — Telemetry (TM) channel
coding profiles
ISO
17809:2014
ISO
17810:2014
201:2014
exchange — Part 201: Creation and
exchange of 3D models — Regular inserts
TC 34
Food products
ISO/TS
17758:2014
*Instant dried milk — Determination of the
dispersibility and wettability
ISO 3493:2014 Vanilla — Vocabulary
systems - Delta-differential one-way
ranging (Delta-DOR) operations
ISO 8586:2012 Sensory analysis — General guidelines for
the selection, training and monitoring of
selected assessors and expert sensory
99
liquefied natural gas — Specification
assessors
ISO 8589:2007/ Sensory analysis — General guidance for
Amd 1:2014
the design of test rooms — Amendment 1
TC 35
ISO 32332:2014
the percentage volume of non-volatile
matter — Part 2: Method using the
determination of non-volatile-matter
content in accordance with ISO 3251 and
determination of dry film density on coated
test panels by the Archimedes principle
TC 38
Textiles
ISO 136292:2014
Textiles — Determination of antifungal
activity of textile products — Part 2: Plate
count method
ISO 163732:2014
Textiles — Dyestuffs — Part 2: General
method for the determination of
extractable dyestuffs including allergenic
and carcinogenic dyestuffs (method using
pyridine-water)
ISO 163733:2014
Textiles — Dyestuffs — Part 3: Method for
determination of certain carcinogenic
dyestuffs (method using
triethylamine/methanol)
ISO 129453:2014
Textiles- Determination of the fabric
propensity to surface pilling, fuzzing or
matting — Part 3: Random tumble pilling
method
TC 43
Acoustics
ISO 101405:2010/Amd
1:2014
Part 5: Requirements for test facilities and
equipment — Amendment 1: Rainfall
sound
TC 44
ISO 1561412:2014
Specification and qualification of welding
procedures for metallic materials —
Welding procedure test — Part 12: Spot,
seam and projection welding
ISO
14555:2014
Welding — Arc stud welding of metallic
materials
ISO 94555:2014
Soft soldering fluxes — Test methods —
Part 5: Copper mirror test
TC 45
ISO 6808:2014 Plastics hoses and hose assemblies for
suction and low-pressure discharge of
petroleum liquids — Specification
ISO
27127:2014
*Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies
for the transfer of liquid petroleum gas and
ISO/TR
16098:2012
Reclaimed rubbers and reclaimed crumb
rubbers — Evaluation of dispersion in
rubber mixes
TC 51
materials handling
ISO
18333:2014
*Pallets for materials handling — Quality
of new wooden components for flat pallets
TC 58
Gas cylinders
ISO
14246:2014
Gas cylinders — Cylinder valves —
Manufacturing tests and examinations
TC 59
ISO
11617:2014
Sealants — Determination of changes in
cohesion and appearance of elastic
weatherproofing sealants after exposure
of statically cured specimens to artificial
weathering and mechanical cycling
TC 61
Plastics
ISO 103501:2007/Amd
1:2014
Plastics — Acquisition and presentation of
comparable single-point data — Part 1:
Moulding materials — Amendment 1
ISO 114031:2014
comparable multipoint data — Part 1:
Mechanical properties
ISO 114033:2014
comparable multipoint data — Part 3:
Environmental influences on properties
ISO 113574:2014
Plastics — Differential scanning
Determination of specific heat capacity
ISO 113582:2014
polymers — Part 2: Determination of
activation energy
ISO/TR
17801:2014
*Plastics — Standard table for reference
global solar spectral irradiance at sea level
— Horizontal, relative air mass 1
ISO 99882:2006
Plastics — Polyoxymethylene (POM)
2: Preparation of test specimens and
TC 69
ISO 225141:2014
Statistical methods in process
management — Capability and
performance — Part 1: General principles
and concepts
ISO 225148:2014
*Statistical methods in process
management — Capability and
performance — Part 8: Machine
100
performance of a multi-state production
process
Part 3: Tower cranes
TC 110
Industrial trucks
ISO 229153:2014
Industrial trucks — Verification of stability
— Part 3: Reach and straddle trucks
ISO 229155:2014
— Part 5: Single-side-loading trucks
TC 113
Hydrometry
ISO
11657:2014
*Hydrometry — Suspended sediment in
streams and canals — Determination of
concentration by surrogate techniques
TC 121
Textile machinery — Noise test code —
Part 4: Yarn processing, cordage and rope
manufacturing machinery — Amendment
2
ISO
18082:2014
Anaesthetic and respiratory equipment —
Dimensions of non-interchangeable
screw-threaded (NIST) low-pressure
connectors for medical gases
ISO 99025:2001/Amd
2:2014
Part 5: Weaving and knitting preparatory
TC 123
Plain bearings
ISO 35481:2014
ISO 99026:2001/Amd
2:2014
Part 6: Fabric manufacturing machinery —
Amendment 2
*Plain bearings — Thin-walled half
bearings with or without flange — Part 1:
Tolerances, design features and methods
of test
ISO 99027:2001/Amd
2:2014
Part 7: Dyeing and finishing machinery —
Amendment 2
ISO/TR
17606:2014
*Plain bearings — Lubrication
characteristics of crosshead pin bearings
for low-speed marine diesel engines
TC 135
TC 85
ISO
12715:2014
ISO 153661:2014
1: Samples containing plutonium in the
microgram range and uranium in the
milligram range
Non-destructive testing — Ultrasonic
testing — Reference blocks and test
procedures for the characterization of
contact probe sound beams
TC 138
TC 72
ISO 99021:2001/Amd
2:2014
Part 1: Common requirements —
Amendment 2
ISO 99022:2001/Amd
2:2014
Part 2: Spinning preparatory and spinning
ISO 99023:2001/Amd
2:2014
Part 3: Nonwoven machinery —
Amendment 2
ISO 99024:2001/Amd
2:2014
ISO 153662:2014
2: Samples containing plutonium and
uranium in the nanogram range and below
ISO
15646:2014
Re-sintering test for UO2, (U,Gd)O2 and
(U,Pu)O2 pellets
TC 87
Cork
ISO
20752:2014
Cork stoppers — Determination of
releasable 2, 4, 6-trichloroanisol (TCA)
TC 96
Cranes
ISO 93743:2014
Cranes — Information to be provided for
enquiries, orders, offers and supply —
ISO 8779:2010/ Plastics piping systems — Polyethylene
Amd 1:2014
(PE) pipes for irrigation — Specifications
— Amendment 1
TC 147
Water quality
ISO
17289:2014
Water quality — Determination of
dissolved oxygen — Optical sensor
method
TC 149
Cycles
ISO 42101:2014
bicycles — Part 1: Terms and definitions
ISO 42102:2014
bicycles — Part 2: Requirements for city
and trekking, young adult, mountain and
racing bicycles
ISO 42103:2014
bicycles — Part 3: Common test methods
ISO 4210-
101
disability
4:2014
bicycles — Part 4: Braking test methods
ISO 42105:2014
bicycles — Part 5: Steering test methods
ISO 717619:2008
ISO 42106:2014
bicycles — Part 6: Frame and fork test
methods
ISO 42107:2014
bicycles — Part 7: Wheels and rims test
methods
ISO/TR 13570- Wheelchairs — Part 2: Typical values and
2:2014
recommended limits of dimensions, mass
and manoeuvring space as determined in
ISO 7176-5
ISO 42108:2014
bicycles — Part 8: Pedal and drive system
test methods
ISO 42109:2014
bicycles — Part 9: Saddles and seat-post
test methods
Wheelchairs — Part 19: Wheeled mobility
devices for use as seats in motor vehicles
TC 180
Solar energy
ISO 229753:2014
Solar energy — Collector components and
materials — Part 3: Absorber surface
durability
TC 185
excessive pressure
ISO 41266:2014
excessive pressure — Part 6: Application,
selection and installation of bursting disc
safety devices
ISO 8098:2014 *Cycles — Safety requirements for
bicycles for young children
TC 150
TC 193
Natural gas
ISO
23317:2014
*Implants for surgery — In vitro evaluation
for apatite-forming ability of implant
materials
ISO
14532:2014
*Natural gas — Vocabulary
TC 156
ISO/TR
22302:2014
*Natural gas — Calculation of methane
number
ISO 753910:2013
Corrosion of metals and alloys — Stress
corrosion testing — Part 10: Reverse Ubend method
TC 198
ISO 753911:2013
Corrosion of metals and alloys — Stress
corrosion cracking — Part 11: Guidelines
for testing the resistance of metals and
alloys to hydrogen embrittlement and
hydrogen-assisted cracking
ISO 158831:2006/Amd
1:2014
Washer-disinfectors — Part 1: General
requirements, terms and definitions and
tests — Amendment 1
TC 204
ISO
21217:2014
Intelligent transport systems —
Communications access for land mobiles
(CALM) — Architecture
TC 206
Fine ceramics
ISO
17139:2014
Thermophysical properties of ceramic
composites — Determination of thermal
expansion
ISO
17142:2014
composites at high temperature in air at
atmospheric pressure — Determination of
fatigue properties at constant amplitude
TC 207
ISO
17081:2014
Method of measurement of hydrogen
permeation and determination of hydrogen
uptake and transport in metals by an
electrochemical technique
TC 160
Glass in building
ISO 114851:2011
Glass in building — Curved glass — Part
1: Terminology and definitions
ISO 114852:2011
Glass in building — Curved glass — Part
2: Quality requirements
TC 163
ISO
10916:2014
*Calculation of the impact of daylight
utilization on the net and final energy
demand for lighting
TC 172
ISO
14045:2012
ISO
10343:2014
Ophthalmic instruments —
Ophthalmometers
*Environmental management — Ecoefficiency assessment of product systems
— Principles, requirements and guidelines
TC 210
TC 173
102
medical devices
IEC/TR 80002- *Medical device software — Part 3:
3:2014
Process reference model of medical
device software life cycle processes (IEC
62304)
TC 215
Health informatics
ISO/TS
17938:2014
*Health informatics — Semantic network
framework of traditional Chinese medicine
language system
of network abstraction layer (NAL) unit
structured video in ISO base media file
format
ISO/IEC TR
30112:2014
*Information technology — Specification
methods for cultural conventions
NORMES CONFIRMEES
ans:
TC 219
Floor coverings
ISO
11856:2014
*Textile floor coverings — Test methods
for the determination of fibre bind using a
Modified Martindale Machine
TC 8
*Machine-made textile floor coverings —
Determination of dimensional changes
after exposure to heat and/or water
ISO
19018:2004
(reconfirmed)
ISO
17984:2014
TC 223
Societal security
ISO
22313:2012
Societal security — Business continuity
management systems — Guidance
TC 242
Energy Management
ISO
50002:2014
*Energy audits — Requirements with
guidance for use
CASCO
ISO 65182:1995
(reconfirmed)
ISO/IEC TS
17022:2012
*Conformity assessment — Requirements
and recommendations for content of a
third-party audit report on management
systems
ISO
10455:1992
(reconfirmed)
for bodies certifying products, processes
and services
ISO
13476:1997
(reconfirmed)
ISO/IEC
17065:2012
TC 23
and forestry
JTC 1
ISO
14982:1998
(reconfirmed)
TC 25
TC 22
Road vehicles
ISO 35532:1997
(reconfirmed)
ISO/IEC 17811- *Information technology — Device control
1:2014
and management — Part 1: Architecture
ISO/IEC 11694- *Identification cards — Optical memory
6:2014
6: Use of biometrics on an optical memory
card
1:2014
Architecture
TC 30
conduits
ISO/IEC
17629:2014
equipment — Method for measuring first
print out time for digital printing devices
ISO/IEC
24734:2014
equipment — Method for measuring digital
printing productivity
15:2014
audio-visual objects — Part 15: Carriage
ISO 93681:1990
(reconfirmed)
TC 38
Textiles
ISO 117212:2003
103
(reconfirmed)
industries
ISO 166631:2009
ISO
17202:2002
(reconfirmed)
TC 44
(reconfirmed)
ISO 51831:1998
(reconfirmed)
(reconfirmed)
TC 69
ISO 35342:2006
ISO
18279:2003
ISO 1362810:2005
TC 72
ISO 366-2:2009
ISO 366-3:2009
ISO 5821:2009
TC 83
and equipment
ISO 176571:2005
(reconfirmed)
ISO 209576:2005
(reconfirmed)
ISO 176572:2005
(reconfirmed)
ISO 209577:2005
(reconfirmed)
ISO 176573:2005
(reconfirmed)
TC 85
ISO 176574:2005
(reconfirmed)
ISO
11929:2010
ISO 176575:2005
(reconfirmed)
ISO
14146:2000
(reconfirmed)
ISO 96922:1998
(reconfirmed)
TC 89
Wood-based panels
ISO 96924:2003
(reconfirmed)
ISO
16981:2003
(reconfirmed)
ISO 96062:2004
(reconfirmed)
ISO
16985:2003
(reconfirmed)
TC 54
Essential oils
TC 92
Fire safety
TC 96
Cranes
ISO 8902:2009
ISO
21093:2003
(reconfirmed)
ISO
21390:2005
(reconfirmed)
TC 67
ISO
11629:2004
(reconfirmed)
ISO 72962:1996
(reconfirmed)
ISO 43011:1986
(reconfirmed)
TC 106
Dentistry
ISO
10477:2004
(reconfirmed)
TC 114
Horology
ISO 1112:2009
ISO
12819:2009
104
ISO 143683:2003
(reconfirmed)
ISO 93932:2005
(reconfirmed)
TC 118
TC 150
ISO/TS
15539:2000
(reconfirmed)
TC 127
TC 153
Valves
ISO/TS 2047414:2008
ISO
12509:2004
(reconfirmed)
ISO
12511:1997
(reconfirmed)
ISO 67461:2003
(reconfirmed)
ISO 67462:2003
(reconfirmed)
TC 163
ISO 100772:2012
TC 172
ISO 80372:1997
(reconfirmed)
ISO 7136:2006
ISO 8596:2009
ISO
13539:1998
(reconfirmed)
ISO 8612:2009
ISO
15219:2004
(reconfirmed)
ISO
10940:2009
ISO
21467:2004
(reconfirmed)
ISO
10944:2009
TC 131
Fluid power systems
ISO
15254:2009
TC 188
ISO 9801:2009
ISO 2941:2009
TC 138
ISO 124022:2006
ISO 124023:2006
ISO 82832:1992
(reconfirmed)
ISO 124024:2006
ISO 124025:2006
ISO 158775:2009
ISO
10931:2005
(reconfirmed)
ISO 124026:2006
ISO
15493:2003
(reconfirmed)
ISO 124027:2006
ISO 124028:2006
ISO 174842:2009
(reconfirmed)
ISO 124029:2006
ISO 1240210:2006
ISO/TR
18124:2006
105
Small craft
TC 195
equipment
ISO
11375:1998
(reconfirmed)
TC 199
Safety of machinery
NORMES ANNULEES
er
ISO 290422:2009
TC 8
ISO 290423:2009
ISO 290424:2009
TC 201
ISO
20341:2003
(reconfirmed)
TC 204
ISO/TS
20452:2007
(reconfirmed)
TC 206
Fine ceramics
ISO
17092:2005
(reconfirmed)
ISO
17565:2003
(reconfirmed)
ISO
18757:2003
(reconfirmed)
ISO
20506:2005
(reconfirmed)
ISO
20509:2003
TC 218
ISO
15366:1999
(replaced by ISO 15366-1:2014, ISO
15366-2:2014)
TC 110
Industrial trucks
ISO 135631:2001
TC 113
Hydrometry
Plain bearings
TC 184
ISO/PAS
26183:2006
(replaced by )
TC 219
Floor coverings
(reconfirmed)
ISO/PAS
11856:2003
Timber
ISO/PAS
17984:2001
TMBG
Market, opinion and social research
ISO/IEC Guide (replaced by )
15:1977
ISO
26000:2010
JTC 1
TC 123
ISO
26362:2009
TMBG
TC 85
TC 225
ISO/IEC
19774:2006
ISO Guide
47:1986
(replaced by )
ISO Guide
69:1999
(replaced by )
JTC 1
ISO/IEC
24762:2008
(replaced by )
ISO/IEC 95414:2009
ISO/IEC 132504:2009
106
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 juillet 2014 au 31 juillet 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
Nieuwe publicaties
TC 6
ISO/DIS
5636-6
*Paper and board — Determination of air
permeance and air resistance (medium
range) — Part 6: Oken method
TC 20
ISO/DIS 7257 *Aircraft — Hydraulic tubing joints and
fittings — Rotary flexure test
Frans.
ISO/DIS
16679.2
Space Systems — Relative motion
analysis elements after LV/SC
Separation
TC 22
Road vehicles
ISO/DIS
7637-3
*Road vehicles — Electrical disturbances
from conduction and coupling — Part 3:
Electrical transient transmission by
capacitive and inductive coupling via
lines other than supply lines
TC 23
ISO/DIS
18564
*Machinery for forestry — Noise test
code
TC 27
Solid mineral fuels
ISO/DIS
13909-1
*Hard coal and coke — Mechanical
sampling — Part 1: General introduction
ISO/DIS
13909-2
sampling — Part 2: Coal — Sampling
from moving streams
ISO/DIS
13909-3
sampling — Part 3: Coal — Sampling
from stationary lots
ISO/DIS
13909-4
sampling — Part 4: Coal — Preparation
of test samples
107
ISO/DIS
13909-5
sampling — Part 5: Coke — Sampling
from moving streams
ISO/DIS
13909-6
sampling — Part 6: Coke — Preparation
of test samples
ISO/DIS
13909-7
sampling — Part 7: Methods for
determining the precision of sampling,
sample preparation and testing
ISO/DIS
13909-8
sampling — Part 8: Methods of testing
for bias
TC 31
ISO/DIS
4000-1
*Passenger car tyres and rims — Part 1:
Tyres (metric series)
TC 34
Food products
ISO/DIS
11816-2
*Milk and milk products — Determination
of alkaline phosphatase activity — Part
2: Fluorometric method for cheese
ISO/DIS
16577
*Molecular biomarker analysis — Terms
and definitions
TC 39
ISO/DIS
16090-1
ISO/DIS
11618
*Building construction — Sealants —
Classification and requirements for
pedestrian walkway sealants
TC 76
ISO/DIS
8362-2
*Injection containers and accessories —
Part 2: Closures for injection
TC 92
Fire safety
ISO 6944*Fire containment — Elements of
1:2008/DAmd building construction — Part 1:
1
Ventilation ducts — Amendment 1
ISO 10294*Fire resistance tests — Fire dampers for
1:1996/DAmd air distribution systems — Part 1: Test
1
method — Amendment 1
ISO 10294*Fire resistance tests — Fire dampers for
4:2001/DAmd air distribution systems — Part 4: Test of
1
thermal release mechanism —
Amendment 1
and equipment
Machine tools
ISO/DIS
13506-2.2
*Machine tools safety — Machining
centres, Milling machines, Transfer
machines — Part 1: Safety requirements
Protective clothing against heat and
flame — Part 2: Skin burn injury
prediction — Calculation requirements
and test cases
TC 102
ISO/DIS
10203
*Iron ores — Determination of calcium —
Flame atomic absorption spectrometric
method
ISO/DIS
10204
*Iron ores — Determination of
magnesium — Flame atomic absorption
ISO/DIS
11536
*Iron ores — Determination of loss on
ignition — Gravimetric method
TC 106
Dentistry
ISO/DIS
17509
*Dentistry — Torque transmitter for
handpieces used for implantation
TC 107
ISO/DIS
11177
*Vitreous and porcelain enamels —
Inside and outside enamelled valves and
pressure pipe fittings for untreated and
ISO/DIS
19051
*Rubber, raw natural, and rubber latex,
natural — Determination of nitrogen
content by Micro Duma's
Combustion method
*Styrene-butadiene rubber (SBR) —
Determination of the microstructure of
solution-polymerized SBR — Part 1: 1HNMR and IR method
21561:2005/Amd 1:2010)
TC 58
Gas cylinders
ISO/DIS
11118.3
*Gas cylinders — Non-refillable metallic
gas cylinders — Specification and test
methods
TC 59
*Framework for specifying performance
in buildings
6241:1984, ISO 7162:1992, ISO
9699:1994)
TC 94
TC 45
ISO/DIS
21561-1
ISO/DIS
19208
108
potable water supply — Quality
requirements and testing
ISO/DIS
28721-5
*Vitreous and porcelain enamels —
Glass-lined apparatus for process plants
— Part 5: Presentation and
characterisation of defects
ISO
23550:2011/D burners and gas-burning appliances —
Amd 1
General requirements — Amendment 1
TC 164
ISO/DIS
6892-4
*Metallic materials — Tensile testing —
Part 4: Method of test in liquid helium
TC 172
ISO/DIS
12853
*Microscopes — Information provided to
the user
TC 176
assurance
ISO/DIS
17668
*Zinc diffusion coatings on ferrous
products — Sherardizing — Specification
TC 110
Industrial trucks
ISO/DIS
22915-24
*Industrial trucks — Verification of
stability — Part 24: Slewing variablereach rough-terrain trucks
TC 135
ISO/DIS
18081
*Non-destructive testing - Acoustic
emission - Leak detection by means of
acoustic emission
ISO/DIS 9000 *Quality management systems —
Fundamentals and vocabulary
TC 147
Water quality
ISO/DIS
17943
volatile organic compounds in water —
Method using headspace solid-phase
micro-extraction (HS-SPME) followed by
gas chromatography-mass spectrometry
(GC-MS)
ISO/DIS 9001 *Quality management systems —
Requirements
9001:2008/Cor 1:2009)
ISO/DIS
18191
TC 150
*Water quality — Determination of pHt in
sea water — Method using the indicator
dye m-cresol purple
ISO/DIS 7198 *Cardiovascular implants and
extracorporeal systems — Vascular
Prostheses — Tubular vascular grafts
and vascular patches
TC 153
TC 181
Safety of toys
ISO 81241/DAmd 1
Safety of toys — Part 1: Safety aspects
related to mechanical and physical
properties — Amendment 1: Cords
TC 198
ISO/DIS
18362
*Processing of cell-based health care
products
TC 204
ISO/DIS
18495-1
Commercial freight — Automotive
visibility in the distribution supply chain
— Part 1: Architecture and data
definitions
TC 213
Valves
ISO/DIS 5208 *Industrial valves — Pressure testing of
metallic valves
TC 157
ISO/DIS
11249
*Mechanical contraceptives — Guidance
for clinical evaluation of intra-uterine
contraceptive devices (IUDs)
TC 159
Ergonomics
ISO/DIS
24505
TC 161
ISO/DIS 1101 *Geometrical product specifications
(GPS) — Geometrical tolerancing —
Tolerances of form, orientation, location
and run-out
TC 244
Method for creating colour combinations
taking account of age-related changes in
human colour vision
ISO/DIS
13577-3
processing equipement — Safety — Part
3: Generation and use of protective and
reactive atmosphere gases
TC 257
Evaluation of energy savings
ISO/DIS
*General technical rules for
109
17741
measurement, calculation and
verification of energy savings of projects
ISO/DIS
17743.2
*Energy savings — Definition of a
methological framework applicable to
calculation and reporting on energy
savings
TMBG
Technical Management Board groups
ISO/IEC DIS
80079-36.2
*Explosive atmospheres — Part 36: Nonelectrical equipment for use in explosive
atmospheres — Basic methods and
requirements
ISO/IEC DIS
80079-37.2
ISO/IEC DIS
80079-20-2
*Explosive atmospheres — Part 37: Nonelectrical equipment for use in explosive
atmospheres — Non-electrical type of
protection constructional safety
'c', control of ignition
sources 'b', liquid
immersion 'k'
*Explosive atmospheres — Part 20-2:
Material characteristics — Combustible
dusts test methods
JTC 1
ISO/IEC DIS
11889-1
*Information technology — Trusted
Platform Module — Part 1: Architecture
ISO/IEC DIS
11889-2
Platform Module — Part 2: Structures
ISO/IEC DIS
11889-3
Platform Module — Part 3: Commands
ISO/IEC DIS
28360
equipment — Determination of chemical
emission rates from electronic equipment
ISO/IEC
144965:2001/DAmd
35
software — Amendment 35: 3D-AVC
Reference software
ISO/IEC DIS
23001-11
*Information technology — MPEG
systems technologies — Part 11: Green
metadata
ISO/IEC DIS
24769-61
*Information Technology — Real Time
Locating System (RTLS) Device
Conformance Test Methods — Part 61:
Low rate pulse repetition frequency Ultra
Wide Band (UWB) air interface
ISO/IEC DIS
24769-62
*Information Technology — Real Time
Locating System (RTLS) Device
Conformance Test Methods — Part 62:
High rate pulse repetition frequency Ultra
ISO/IEC DIS
24770-61
*Information technology — Real Time
Locating System (RTLS) device
performance test methods — Part 61:
Low rate pulse repetition frequency Ultra
PROJETS FINALS
er
ISO/IEC DIS
11889-4
Platform Module — Part 4: Supporting
Routines
TC 17
Steel
ISO/IEC
156933:2009/DAmd
2
integrated circuit cards — Vicinity cards
— Part 3: Anticollision and transmission
protocol — Amendment 2: Clarification of
use of Data Elements
ISO/FDIS
16573
*Method for evaluation of hydrogen
delayed fracture resistance of high
strength steels
TC 20
ISO/IEC DIS
18033-5
techniques — Encryption algorithms —
Part 5: Identity-based ciphers
ISO/FDIS
16919
systems - Requirements for bodies
providing audit and certification of
candidate trustworthy digital repositories
TC 22
Road vehicles
ISO/IEC DIS
24760-2
*Information Technology — Security
Techniques — A Framework for Identity
Management — Part 2: Reference
architecture and requirements
ISO/FDIS
11451-2
ISO/IEC DIS
29190
techniques — Privacy capability
assessment model
energy — Part 2: Off-vehicle radiation
sources
ISO/FDIS
110
11451-3
ISO/FDIS
11452-1
ISO/FDIS
11452-8
energy — Part 3: On-board transmitter
simulation
TC 34
Food products
ISO/FDIS
11136
*Sensory analysis — Methodology —
General guidance for conducting hedonic
tests with consumers in a controlled area
*Road vehicles — Component test
methods for electrical disturbances from
energy — Part 1: General principles and
terminology
11452-1:2005/Amd 1:2008)
TC 44
ISO/FDIS
23278
*Non-destructive testing of welds —
Magnetic particle testing of welds —
Acceptance levels
TC 45
*Road vehicles — Component test
methods for electrical disturbances from
energy — Part 8: Immunity to magnetic
fields
ISO/FDIS
18064
*Thermoplastic elastomers —
Nomenclature and abbreviated terms
TC 23
and forestry
ISO/FDIS
16119-4
Environmental requirements for sprayers
— Part 4: Fixed and semi-mobile sprayers
ISO/FDIS
16122-4
*Agricultural and forestry machines —
Fixed and semi-mobile sprayers
ISO/FDIS
9635-5
Irrigation valves — Part 5: Control valves
TC 24
sieving
ISO/FDIS 815- *Rubber, vulcanized or thermoplastic —
2
Determination of compression set — Part
2: At low temperatures
ISO/FDIS
11346
Estimation of life-time and maximum
temperature of use
TC 58
Gas cylinders
ISO/FDIS
11120
*Gas cylinders — Refillable seamless
steel tubes of water capacity between 150
l and 3000 l — Design construction and
testing
11120:1999/Amd 1:2013)
TC 61
Plastics
ISO/FDIS
19065-1
*Plastics — Acrylonitrile-styrene-acrylate
(ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile(chlorinated polyethylene)-styrene (ACS)
specifications
ISO/FDIS
27891
*Aerosol particle number concentration —
Calibration of condensation particle
counters
TC 28
ISO/FDIS
17308
*Petroleum products and other liquids —
Ethanol — Determination of electrical
conductivity
TC 29
Small tools
TC 84
ISO/FDIS
12164-3
*Hollow taper interface with flange contact
surface — Part 3: Dimensions of shanks
for stationary tools
ISO/FDIS
11608-1
*Needle-based injection systems for
medical use — Requirements and test
methods — Part 1: Needle-based injection
systems
TC 85
ISO/FDIS
12799
*Nuclear energy — Determination of
nitrogen content in UO2, (U,Gd)O2 and
(U,Pu)O2 sintered pellets — Inert gas
extraction and conductivity detection
ISO
*Coated abrasives — Flap wheels with
3919:2005/FDA shaft — Amendment 1
md 1
TC 33
Refractories
ISO/FDIS
16349
*Refractory materials — Determination of
abrasion resistance at elevated
temperature
111
method
TC 182
Geotechnics
ISO/FDIS
15651
*Nuclear energy — Determination of total
hydrogen content in PuO2 and UO2
powders and UO2, (U,Gd)O2 and
(U,Pu)O2 sintered pellets — Inert gas
extraction and conductivity detection
method
ISO/FDIS
17892-1
*Geotechnical investigation and testing —
Laboratory testing of soil — Part 1:
Determination of water content
ISO/TS 17892-1:2004/Cor 1:2006)
TC 92
Fire safety
ISO/FDIS
17892-2
ISO/FDIS
17554
*Reaction to fire tests — Mass loss
measurement
*Geotechnical investigation and testing —
Laboratory testing of soil — Part 2:
Determination of density of fine-grained
soil
ISO/TS 17892-2:2004/Cor 1:2006)
TC 107
TC 188
Small craft
ISO/FDIS
14919
*Thermal spraying — Wires, rods and
cords for flame and arc spraying —
Classification — Technical supply
conditions
*Small craft — Permanently installed
ISO
21487:2012/FD petrol and diesel fuel tanks — Amendment
Amd 1
1
ISO/FDIS
14920
*Thermal spraying — Spraying and fusing
of self-fluxing alloys
TC 130
Graphic technology
ISO/FDIS
15339-1
*Graphic technology — Printing from
digital data across multiple technologies
— Part 1: Principles
TC 131
Fluid power systems
ISO/FDIS
19973-5
*Pneumatic fluid power — Assessment of
component reliability by testing — Part 5:
Non-return valves, shuttle valves, dual
pressure valves (AND function), one-way
adjustable flow control valves, quickexhaust valves
ISO
*Small craft — Electrical/electronic control
25197:2012/FD systems for steering, shift and throttle —
Amd 1
Amendment 1
TC 195
equipment
ISO/FDIS
13105-1
equipment — Machinery for concrete
surface floating and finishing — Part 1:
Terms and commercial specifications
ISO/FDIS
13105-2
equipment — Machinery for concrete
surface floating and finishing — Part 2:
Safety requirements and verification
TC 204
TC 147
Water quality
ISO/FDIS
17572-1
ISO/FDIS
5667-14
Guidance on quality assurance and quality
control of environmental water sampling
and handling
*Intelligent transport systems (ITS) —
Location referencing for geographic
databases — Part 1: General
requirements and conceptual model
ISO/FDIS
17572-2
databases — Part 2: Pre-coded location
references (pre-coded profile)
ISO/FDIS
17572-3
databases — Part 3: Dynamic location
references (dynamic profile)
17572-3:2008/Cor 1:2009)
TC 206
Fine ceramics
ISO/FDIS
20507
Vocabulary
TC 172
ISO/FDIS
10110-6
Preparation of drawings for optical
elements and systems — Part 6: Centring
tolerances
10110-6:1996/Cor 1:1999)
ISO/FDIS 8039 *Microscopes — Values, tolerances and
symbols for magnification
ISO/FDIS
19012-3
*Microscopes — Designation of
microscope objectives — Part 3: Spectral
transmittance
112
TC 213
ISO/FDIS
14638
— Matrix model
(Revision of ISO/TR 14638:1995)
TC 215
Health informatics
ISO/IEEE
*Health informatics — Personal health
11073device communication — Part 20601:
20601:2010/FD Application profile — Optimized exchange
protocol — Amendment 1
Amd 1
Timber
ISO/FDIS
13061-3
ultimate strength in static bending
1:2013/FDAmd of moving pictures and associated audio
5
Amendment 5: Transport of MVC depth
video sub-bitstream and extensions to
support HEVC low delay coding mode
14496-29
audio-visual objects — Part 29: Web video
coding
ISO/IEEE
*Health informatics — Point-of-care
11073medical device communication — Part
30200:2004/FD 30200: Transport profile — Cable
Amd 1
connected — Amendment 1
TC 218
ISO/IEC FDIS *Identification cards — Optical memory
11694-5
5: Data format for information interchange
for applications using ISO/IEC 11694-4
ISO/IEC FDIS *Information technology — Radio
18000-4
management — Part 4: Parameters for air
interface communications at 2,45 GHz
18004
— QR Code bar code symbology
specification
ISO/FDIS
13061-4
modulus of elasticity in static bending
ISO/FDIS
13061-6
ultimate tensile stress parallel to grain
ISO/FDIS
13061-7
ultimate tensile stress perpendicular to
grain
PC 251
Asset management
ISO
55000:2014
ISO/FDIS
17959
*General requirements for solid wood
flooring
ISO
55001:2014
TC 257
Evaluation of energy savings
ISO/FDIS
17742
*Energy efficiency and savings calculation
for countries, regions and cities
ISO
55002:2014
of ISO 55001
JTC 1
REMCO
Committee on reference materials
ISO Guide
80:2014
*Guidance for the in-house preparation of
quality control materials (QCMs)
TC 2
Fasteners
NORMES PUBLIEES
er
Nouvelles Normes internationales publiées entre le 1 juillet
2014 et le 31 juillet 2014.
anglais seulement
ISO/IEC FDIS *Information technology — Device control
17811-2
and management — Part 2: Specification
of Device Control and Management
Protocol
FDIS 15289
Content of life-cycle information products
(documentation)
(Revision of ISO/IEC/IEEE 15289:2011)
ISO 4017:2014 Fasteners — Hexagon head screws —
Product grades A and B
TC 4
ISO 199:2014 Rolling bearings — Thrust bearings —
113
Rolling bearings
and tolerance values
2:2014
Performance and general test methods
ISO 126143:2014
Check valve
ISO 2469:2014 Paper, board and pulps — Measurement
of diffuse radiance factor (diffuse
reflectance factor)
ISO 126144:2014
Manual valve
ISO 56312:2014
Paper and board — Determination of
Outdoor daylight conditions (D65/10
degrees)
ISO 126145:2014
Tank pressure gauge
ISO 56313:2014
Paper and board — Determination of
Indoor illumination conditions (D50/2
degrees)
ISO 126146:2014
Pressure regulator
ISO 126147:2014
Pressure relief valve
ISO 126148:2014
Excess flow valve
ISO 126149:2014
Gas-tight housing and ventilation hose
ISO 1261410:2014
Rigid fuel line in stainless steel
ISO 1261411:2014
Fittings
ISO 683-4:2014 *Heat-treatable steels, alloy steels and
free-cutting steels — Part 4: Free-cutting
steels
ISO 1261412:2014
Rigid fuel line in copper and its alloys
ISO 4999:2014 *Continuous hot-dip terne (lead alloy)
coated cold-reduced carbon steel sheet of
commercial, drawing and structural
qualities
ISO 1261413:2014
Tank pressure control regulator
ISO 492:2014 Rolling bearings — Radial bearings —
Dimensional and geometrical tolerances
TC 6
TC 8
ISO 8728:2014 *Ships and marine technology — Marine
gyro-compasses
ISO 9875:2000 Ships and marine technology — Marine
echo-sounding equipment
ISO
14885:2014
Large yachts — Diesel engines for main
propulsion and essential auxiliaries —
Safety requirements
TC 17
Steel
ISO
13933:2014
*Steel and iron — Determination of
calcium and magnesium — Inductively
coupled plasma atomic emission
TC 20
ISO 1261414:2014
ISO 69662:2014
*Aircraft ground equipment — Basic
requirements — Part 2: Safety
requirements
Differential pressure fuel content gauge
ISO 1261415:2014
TC 22
Road vehicles
Capacitance fuel content gauge
ISO
16552:2014
*Heavy commercial vehicles and buses —
Stopping distance in straight-line braking
with ABS — Open loop and closed loop
test methods
ISO 1261416:2014
Heat exchanger - vaporizer
ISO 1261417:2014
Natural gas detector
ISO 1261418:2014
Gas temperature sensor
ISO 126141:2014
ISO 12614-
General requirements and definitions
114
TC 23
and forestry
ISO
Agricultural wheeled tractors — Rear730:2009/Amd mounted three-point linkage — Categories
1:2014
1N, 1, 2N, 2, 3N, 3, 4N and 4 —
Amendment 1
ISO 117836:2014
TC 29
Tractors and machinery for agriculture and
forestry — Serial control and
Virtual terminal
Small tools
80:2014
exchange — Part 80: Creation and
exchange of 3D models — Overview and
principles
ISO 60317:2014
Bonded abrasive products — Dimensions
— Part 17: Spindle mounted wheels (ISO
type 52)
ISO 242:2014 Carbide tips for brazing on turning tools
— Part 4: Semantic roles (SemAF-SR)
TC 38
Textiles
ISO
16533:2014
*Textiles — Measurement of exothermic
and endothermic properties of textiles
under humidity change
ISO 3074:2014 Wool — Determination of
dichloromethane-soluble matter in combed
sliver
ISO
18068:2014
*Cotton fibres — Test method for sugar
content — Spectrophotometry
TC 43
Acoustics
ISO
10844:2014
Acoustics — Specification of test tracks for
measuring noise emitted by road vehicles
and their tyres
ISO/TR 17534- *Acoustics — Software for the calculation
2:2014
of sound outdoors — Part 2: General
recommendations for test cases and
quality assurance interface
ISO 162511:2014
ISO 514:2014 Turning tools with carbide tips — Internal
tools
the reduction of transmitted impact noise
by floor coverings on a small floor mockup — Part 1: Heavyweight compact floor
TC 44
ISO 93611:2014
Indexable inserts for cutting tools —
Ceramic inserts with rounded corners —
Part 1: Dimensions of inserts without fixing
hole
ISO
13469:2014
*Mechanical joining — Form-fit blind rivets
and (lock) bolt joints — Specifications and
qualification of testing procedures
TC 34
Food products
TC 45
ISO 243:2014 Turning tools with carbide tips — External
tools
ISO/TR 6579- *Microbiology of the food chain —
3:2014
enumeration and serotyping of Salmonella
— Part 3: Guidelines for serotyping of
Salmonella spp.
Animal and vegetable fats and oils —
ISO
5555:2001/Amd Sampling — Amendment 1: Flexitanks
1:2014
ISO 122281:2014
Determination of individual and total
method — Part 1: Animal and vegetable
fats and oils
TC 35
ISO
17463:2014
Paints and varnishes — Guidelines for the
determination of anticorrosive properties
of organic coatings by accelerated cyclic
electrochemical technique
TC 37
content resources
ISO 246174:2014
Semantic annotation framework (SemAF)
ISO 8030:2014 Rubber and plastics hoses — Method of
test for flammability
ISO 249:2014 *Rubber, raw natural — Determination of
dirt content
ISO 61013:2014
*Rubber — Determination of metal content
by atomic absorption spectrometry — Part
3: Determination of copper content
ISO 61014:2014
*Rubber — Determination of metal content
4: Determination of manganese content
ISO
18766:2014
ISO 33021:2014
Rubber — Tolerances for products — Part
1: Dimensional tolerances
ISO 3385:2014 Flexible cellular polymeric materials —
Determination of fatigue by constant-load
pounding
ISO/TS 22762- *Elastomeric seismic-protection isolators
4:2014
— Part 4: Guidance on the application of
ISO 22762-3
115
TC 46
12912:2014
ISO
18626:2014
*Information and documentation —
Interlibrary Loan Transactions
TC 87
TC 54
Essential oils
Cork
ISO 9986:2014 Composition cork for shoe outsoles
TC 106
Dentistry
ISO 3218:2014 Essential oils — Principles of
nomenclature
ISO
16443:2014
*Dentistry — Vocabulary for dental
implants systems and related procedure
TC 58
Gas cylinders
TC 108
ISO
10297:2014
Gas cylinders — Cylinder valves —
Specification and type testing
ISO 98094:2014
Gas cylinders — Refillable seamless steel
gas cylinders — Design, construction and
testing — Part 4: Stainless steel cylinders
with an Rm value of less than 1 100 MPa
ISO 108168:2014
Mechanical vibration — Evaluation of
non-rotating parts — Part 8: Reciprocating
compressor systems
TC 60
Gears
ISO 1606342:2014
ISO
14104:2014
Gears — Surface temper etch inspection
Calibration of seismometers with high
accuracy using acceleration of gravity
TC 61
Plastics
ISO
17359:2011
machines — General guidelines
ISO 184366:2014
— Part 6: Acoustic emission
TC 110
Industrial trucks
ISO 2291516:2014
— Part 16: Pedestrian-propelled trucks
TC 121
ISO 80601-269:2014
and essential performance of oxygen
concentrator equipment
TC 130
Graphic technology
ISO 126474:2014
Part 4: Publication gravure printing
TC 131
Fluid power systems
ISO 3167:2014 Plastics — Multipurpose test specimens
ISO 113581:2014
Plastics — Thermogravimetry (TG) of
polymers — Part 1: General principles
ISO 844:2014 Rigid cellular plastics — Determination of
compression properties
ISO 4895:2014 Plastics — Liquid epoxy resins —
Determination of tendency to crystallize
TC 68
Financial services
ISO 95642:2014
*Financial services — Personal
Identification Number (PIN) management
and security — Part 2: Approved
algorithms for PIN encipherment
TC 69
ISO 118436:2013
*Capability of detection — Part 6:
Methodology for the determination of the
critical value and the minimum detectable
value in Poisson distributed
measurements by normal approximations
ISO
16336:2014
*Applications of statistical and related
methods to new technology and product
development process — Robust
parameter design (RPD)
ISO 7241:2014 Hydraulic fluid power — Dimensions and
requirements of quick-action couplings
TC 135
TC 70
ISO
17405:2014
ISO 454815:2014
*Methods of test for full-flow lubricating oil
filters for internal combustion engines —
Part 15: Vibration fatigue test for
composite filter housings
Non-destructive testing — Ultrasonic
testing — Technique of testing claddings
produced by welding, rolling and explosion
TC 146
Air quality
ISO 143851:2014
Greenhouse gases — Part 1: Calibration
of automated measuring systems
ISO 14385-
TC 72
ISO
*Circular knitting machines — Vocabulary
116
2:2014
Greenhouse gases — Part 2: Ongoing
quality control of automated measuring
systems
TC 189
Ceramic tile
ISO 1600032:2014
Indoor air — Part 32: Investigation of
buildings for the occurrence of pollutants
ISO 105454:2014
TC 147
Water quality
ISO 130071:2014
ISO 56676:2014
Guidance on sampling of rivers and
streams
Ceramic tiles — Grouts and adhesives —
Part 1: Terms, definitions and
specifications for adhesives
TC 190
Soil quality
TC 150
ISO 143881:2014
ISO 58412:2014
*Implants for surgery — Cardiac
pacemakers — Part 2: Reporting of
clinical performance of populations of
pulse generators or leads
Soil quality — Acid-base accounting
procedure for acid sulfate soils — Part 1:
Introduction and definitions, symbols and
acronyms, sampling and sample
preparation
TC 158
Analysis of gases
ISO 143882:2014
ISO 61452:2014
*Gas analysis — Preparation of calibration
gas mixtures using dynamic methods —
Part 2: Piston pumps
Soil quality - Acid-base accounting
Chromium reducible sulfur (CRS)
methodology
ISO 143883:2014
Soil quality — Acid-base accounting
Suspension peroxide oxidation combined
acidity and sulfur (SPOCAS) methodology
TC 193
Natural gas
ISO 69745:2014
Natural gas — Determination of
composition and associated uncertainty by
gas chromatography — Part 5: Isothermal
method for nitrogen, carbon dioxide, C1 to
C5 hydrocarbons and C6+ hydrocarbons
TC 198
ISO
11135:2014
Sterilization of health-care products —
Ethylene oxide — Requirements for the
control of a sterilization process for
medical devices
ISO 116071:2006/Amd
1:2014
Packaging for terminally sterilized medical
devices — Part 1: Requirements for
materials, sterile barrier systems and
packaging systems — Amendment 1
ISO 116072:2006/Amd
1:2014
Packaging for terminally sterilized medical
devices — Part 2: Validation requirements
for forming, sealing and assembly
processes — Amendment 1
TC 201
ISO
14706:2014
*Surface chemical analysis —
Determination of surface elemental
contamination on silicon wafers by totalreflection X-ray fluorescence (TXRF)
spectroscopy
TC 204
ISO 15638-
Framework for collaborative Telematics
determination — Amendment 1
TC 163
ISO 98691:2014
*Thermal insulation — Building elements
— In-situ measurement of thermal
resistance and thermal transmittance —
Part 1: Heat flow meter method
TC 164
ISO
16808:2014
Metallic materials — Sheet and strip —
Determination of biaxial stress-strain curve
by means of bulge test with optical
measuring systems
TC 172
ISO 128581:2014
Ancillary devices for geodetic instruments
— Part 1: Invar levelling staffs
ISO 1197910:2006/Amd
1:2014
Ophthalmic implants — Intraocular lenses
— Part 10: Phakic intraocular lenses —
Amendment 1
TC 176
assurance
ISO
10002:2014
Quality management — Customer
satisfaction — Guidelines for complaints
handling in organizations
TC 188
Small craft
ISO 61854:2011
Inflatable boats — Part 4: Boats with a hull
length of between 8 m and 24 m with a
motor power rating of 15 kW and greater
ISO 122155:2008/Amd
1:2014
Small craft — Hull construction and
scantlings — Part 5: Design pressures for
monohulls, design stresses, scantlings
117
6:2014
ISO 156388:2014
ISO 1563811:2014
ISO 1563812:2014
Applications for Regulated commercial
freight Vehicles (TARV) — Part 6:
Regulated applications
TC 211
Framework for cooperative telematics
applications for regulated vehicles (TARV)
— Part 8: Vehicle access management
— Part 11: Driver work records
— Part 12: Vehicle mass monitoring
ISO/TS 19159- *Geographic information — Calibration
1:2014
and validation of remote sensing imagery
sensors and data — Part 1: Optical
sensors
TC 215
Health informatics
ISO/TS
17948:2014
*Health informatics — Traditional Chinese
medicine literature metadata
TC 223
Societal security
ISO
22397:2014
*Societal security — Guidelines for
establishing partnering arrangements
TC 226
aluminium
ISO 1563814:2014
— Part 14: Vehicle access control
ISO
10143:2014
production of aluminium — Calcined coke
for electrodes — Determination of the
electrical resistivity of granules
ISO 1563815:2014
— Part 15: Vehicle location monitoring
ISO 129861:2014
ISO 1563816:2014
— Part 16: Vehicle speed monitoring
*Carbonaceous materials used in the
Determination of bending/shear strength
by the three-point method
ISO 129862:2014
ISO 1563817:2014
— Part 17: Consignment and location
monitoring
*Carbonaceous materials used in the
Determination of flexural strength by the
four-point method
ISO
18515:2014
production of aluminium — Cathode
blocks and baked anodes —
TC 238
Solid biofuels
ISO
16559:2014
Solid biofuels — Terminology, definitions
and descriptions
ISO/TS
17427:2014
Cooperative systems — Roles and
responsibilities in the context of
cooperative ITS based on architecture(s)
for cooperative systems
TC 206
Fine ceramics
TC 247
ISO
17942:2014
for chemical analysis of boron nitride
powders
ISO
16678:2014
Guidelines for interoperable object
identification and related authentication
systems to deter counterfeiting and illicit
trade
TC 207
IULTCS
ISO
14046:2014
*Environmental management — Water
footprint — Principles, requirements and
guidelines
ISO 2588:2014 Leather — Sampling — Number of items
for a gross sample
ISO/TS
14071:2014
Environmental management — Life cycle
assessment — Critical review processes
and reviewer competencies: Additional
requirements and guidelines to ISO
14044:2006
JTC 1
ISO/IEC 29182- *Information technology — Sensor
6:2014
Architecture (SNRA) — Part 6:
Applications
118
ISO/IEC 15149- *Information technology —
1:2014
exchange between systems — Magnetic
field area network (MFAN) — Part 1: Air
interface
4:2010/Amd
1:2014
image coding system — Part 4:
Additional JPEG XR conformance test
streams
ISO/IEC 17839- *Information technology — Biometric
1:2014
System-on-Card — Part 1: Core
requirements
ISO/IEC 29167- *Information technology — Automatic
11:2014
— Part 11: Crypto suite PRESENT-80
security services for air interface
communications
ISO/IEC TS
18661-1:2014 languages, their environments, and
system software interfaces — Floatingpoint extensions for C — Part 1: Binary
floating-point arithmetic
ISO/IEC TR
*Information technology — Interoperability
13066-6:2014 with Assistive Technology (AT) — Part 6:
Java accessibility application
programming interface (API)
ISO/IEC 14763- *Information technology — Implementation
3:2014
and operation of customer premises
cabling — Part 3: Testing of optical fibre
cabling
4:1998/Cor
techniques — Hash-functions — Part 4:
1:2014
Hash-functions using modular arithmetic
— Technical Corrigendum 1
ISO/IEC
27018:2014
techniques — Code of practice for
protection of personally identifiable
information (PII) in public clouds acting as
PII processors
2:2014
supplier relationships — Part 2:
Requirements
4:2004/Amd
audio-visual objects — Part 4:
41:2014
Conformance testing of MVC plus depth
extension of AVC
12:2012/Cor
audio-visual objects — Part 12: ISO base
2:2014
media file format — Technical
Corrigendum 2
28:2012/Cor
audio-visual objects — Part 28: Composite
2:2014
font representation — Technical
Corrigendum 2: Changes and clarifications
of CFR element descriptions
12:2012/Cor
image coding system — Part 12: ISO base
2:2014
media file format — Technical
Corrigendum 2
ISO/IEC TR
30112:2014
*Information technology — Specification
methods for cultural conventions
ISO/IEC 20006- *Information technology for learning,
1:2014
Competency general framework and
information model
11:2013/Amd interchange formats — Part 11:
1:2014
Signature/sign processed dynamic data —
Amendment 1: Conformance test
assertions
ISO/IEC TR
29144:2014
*Information technology — Biometrics —
The use of biometric technology in
commercial Identity Management
applications and processes
NORMES CONFIRMEES
ans:
IIW
ISO
14347:2008
TC 2
Fasteners
ISO/IEC 23001- *Information technology — MPEG
4:2014
systems technologies — Part 4: Codec
configuration representation
TC 5
Ferrous metal pipes and metallic
fittings
ISO/IEC 29199-*Information technology — JPEG XR
119
TC 8
ISO
14210:1998
(reconfirmed)
ISO
14211:1998
(reconfirmed)
TC 10
(reconfirmed)
ISO
14212:1998
(reconfirmed)
ISO 12825:1999
(reconfirmed)
ISO
14213:1998
(reconfirmed)
ISO 12844:2001
ISO
14214:1998
(reconfirmed)
TC 20
ISO
14215:1998
(reconfirmed)
ISO
14216:1998
(reconfirmed)
ISO
14217:1998
(reconfirmed)
ISO
14218:1998
(reconfirmed)
ISO
14219:1998
(reconfirmed)
ISO
14220:1998
(reconfirmed)
ISO
14221:1998
(reconfirmed)
ISO
13764:1996
(reconfirmed)
ISO
14962:1997
(reconfirmed)
ISO
20652:2006
(reconfirmed)
ISO
21459:2006
(reconfirmed)
ISO
22643:2003
(reconfirmed)
ISO
13414:1997
(reconfirmed)
ISO
14190:1998
(reconfirmed)
ISO
14191:1998
(reconfirmed)
ISO
14192:1998
(reconfirmed)
ISO
14193:1998
(reconfirmed)
ISO
14194:1998
(reconfirmed)
ISO
14195:1998
(reconfirmed)
ISO
14196:1998
(reconfirmed)
ISO
14197:1998
(reconfirmed)
ISO
14201:1998
(reconfirmed)
ISO
14202:1998
(reconfirmed)
ISO
14203:1998
(reconfirmed)
ISO
14204:1998
(reconfirmed)
ISO
14206:1998
(reconfirmed)
ISO
14207:1998
(reconfirmed)
ISO
14208:1998
(reconfirmed)
ISO
14209:1998
(reconfirmed)
ISO
22666:2007
ISO
26868:2009
ISO
14619:2003
(reconfirmed)
ISO
14623:2003
(reconfirmed)
ISO
15860:2006
(reconfirmed)
ISO
21648:2008
120
17639:2003
ISO
22010:2007
ISO
22826:2005
(reconfirmed)
TC 28
ISO 67433:2003
(reconfirmed)
TC 45
ISO 99243:2009
ISO/TS
11365:2011
TC 46
ISO/TS
11366:2011
TC 30
conduits
ISO
11631:1998
(reconfirmed)
TC 34
Food products
ISO
16050:2003
(reconfirmed)
ISO
20775:2009
ISO
23950:1998
(reconfirmed)
TC 58
Gas cylinders
TC 61
Plastics
ISO 16281:2009
ISO 3356:2009
ISO
23065:2009
TC 69
ISO 105761:2003
(reconfirmed)
ISO
11095:1996
(reconfirmed)
TC 76
ISO 88712:2003
(reconfirmed)
ISO
13903:2005
(reconfirmed)
ISO 88713:2003
(reconfirmed)
ISO
14183:2005
(reconfirmed)
TC 83
and equipment
ISO
14718:1998
(reconfirmed)
ISO
14790:2005
(reconfirmed)
TC 38
Textiles
TC 85
ISO
13722:1996
(reconfirmed)
ISO
22174:2005
(reconfirmed)
ISO 59831:2005
(reconfirmed)
ISO 182133:2009
TC 41
ISO
10247:1990
(reconfirmed)
ISO
27467:2009
TC 92
ISO
10247:1990/Am
d 1:2006
Fire safety
ISO/TS
24679:2011
TC 44
ISO
(reconfirmed)
TC 94
121
and equipment
ISO
13998:2003
(reconfirmed)
ISO 139993:2002
(reconfirmed)
ISO
14877:2002
(reconfirmed)
ISO
16603:2004
(reconfirmed)
ISO
16604:2004
(reconfirmed)
ISO
22608:2004
ISO
12238:2001
(reconfirmed)
ISO
16874:2004
(reconfirmed)
ISO
20401:2005
(reconfirmed)
ISO 61942:2009
ISO 61944:2009
TC 135
(reconfirmed)
ISO/TS
22809:2007
(reconfirmed)
ISO
22609:2004
(reconfirmed)
TC 138
ISO
22612:2005
(reconfirmed)
ISO 158751:2003
(reconfirmed)
TC 96
Cranes
(reconfirmed)
ISO 86864:2005
(reconfirmed)
ISO 158753:2003
(reconfirmed)
ISO 102454:2004
(reconfirmed)
ISO 158755:2003
ISO 124884:2004
(reconfirmed)
TC 100
Chains and chain sprockets for power
transmission and conveyors
ISO 158771:2009
ISO 158772:2009
ISO 158773:2009
TC 105
Steel wire ropes
ISO/TS
10839:2000
(reconfirmed)
ISO
21669:2005
(reconfirmed)
TC 145
Graphical symbols
TC 107
ISO
23601:2009
TC 146
Air quality
TC 111
ISO
11222:2002
(reconfirmed)
ISO
14956:2002
(reconfirmed)
TC 147
Water quality
ISO
10570:2004
(reconfirmed)
ISO
15839:2003
(reconfirmed)
TC 131
Fluid power systems
(reconfirmed)
ISO 57821:1997
(reconfirmed)
ISO
17381:2003
ISO 57822:1997
(reconfirmed)
ISO 8539:2009
TC 127
122
ISO 99641:1993
(reconfirmed)
ISO 99642:1993
(reconfirmed)
ISO 99643:1993
(reconfirmed)
ISO
14911:1998
(reconfirmed)
ISO
15586:2003
(reconfirmed)
ISO
15680:2003
(reconfirmed)
ISO 156811:2003
(reconfirmed)
(reconfirmed)
ISO 159271:2003
(reconfirmed)
ISO 159272:2009
ISO 159273:2009
TC 171
ISO
16265:2009
ISO
20179:2005
ISO
13787:2003
(reconfirmed)
TC 188
Small craft
ISO
10592:1994
(reconfirmed)
ISO
11547:1994
(reconfirmed)
ISO 145091:2008
(reconfirmed)
ISO 145093:2009
ISO
25101:2009
TC 189
Ceramic tile
ISO 107053:2003
(reconfirmed)
ISO 1054511:1994
(reconfirmed)
ISO
20079:2005
(reconfirmed)
TC 190
Soil quality
(reconfirmed)
TC 150
ISO
15709:2002
ISO 720610:2003
(reconfirmed)
ISO
15903:2002
(reconfirmed)
TC 158
Analysis of gases
ISO 103811:2002
(reconfirmed)
ISO 103812:2002
(reconfirmed)
ISO 103814:2003
(reconfirmed)
ISO 103815:2005
(reconfirmed)
(reconfirmed)
ISO 61455:2009
ISO 61457:2009
ISO 61459:2009
TC 159
Ergonomics
ISO 112281:2003
(reconfirmed)
ISO 103817:2005
ISO 103816:2009
ISO
15265:2004
ISO
14239:1997
(reconfirmed)
ISO 142401:1997
(reconfirmed)
ISO 142402:1997
(reconfirmed)
(reconfirmed)
ISO
15743:2008
TC 163
123
ISO
15473:2002
(reconfirmed)
ISO/IEC 116944:2008
ISO
16072:2002
(reconfirmed)
ISO/IEC TR
10091:1995
ISO
20963:2005
(reconfirmed)
ISO
22030:2005
(reconfirmed)
NORMES ANNULEES
er
ISO/TS 298431:2010
TC 193
Natural gas
TC 17
Steel
ISO 69781:2003
(reconfirmed)
ISO 69782:2003
TC 226
TC 61
Plastics
(reconfirmed)
ISO
11358:1997
aluminium
TC 121
ISO 8359:1996 (replaced by ISO 80601-2-69:2014)
TC 131
Fluid power systems
ISO 72411:1987
TC 147
Water quality
ISO 9965:1993 (replaced by ISO/TS 17379-2:2013)
TC 159
Ergonomics
ISO/TS
14415:2005
(replaced by )
TC 163
TC 198
ISO 111351:2007
2:2008
TC 204
6:2013
ISO
10237:1997
(reconfirmed)
8:2013
ISO
11412:1998
(reconfirmed)
11:2013
ISO
14435:2005
(reconfirmed)
12:2013
JTC 1
14:2013
124
15:2013
16:2013
17:2013
125
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
er
Période du 1 août 2014 au 31 août 2014..
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
Nieuwe publicaties
PC 248
Sustainability criteria for bioenergy
ISO/DIS
13065
*Sustainability criteria for bioenergy
TC 8
ISO/DIS
28007-1
Guidelines for Private Maritime Security
Companies (PMSC) providing privately
contracted armed security personnel
(PCASP) on board ships (and pro forma
contract) — Part 1:
Frans.
ISO/DIS 5488 *Ships and marine technology —
Accommodation ladders
ISO/DIS 7061 *Ships and marine technology —
Aluminium shore gangways for seagoing
vessels
ISO/DIS 7364 *Ships and marine tecnhology — Deck
machinery — Accommodation ladder
winches
TC 22
Road vehicles
ISO/DIS
17536-1
*Road vehicles — Aerosol separator
performance test for internal combustion
engines — Part 1: General
ISO/DIS
17449
*Road vehicles — Safety glazing
materials — Test methods for properties
of electrically heated glazing
ISO
*Road vehicles — Symbols for controls,
2575:2010/DA indicators and tell-tales — Amendment 5
md 5
ISO/DIS
18580
*Motorcycles — Verification of total
running resistance force during mode
running on a chassis dynamometer
TC 23
ISO/DIS
126
18471
Filters — Verification of filtration grade
TC 36
Cinematography
ISO/DIS 2969 *Cinematography — B-chain electroacoustic reponse of motion-picture
control rooms and indoor theatres —
Specifications and measurements
TC 71
ISO/DIS
16711
*Seismic assessment and retrofit of
concrete structures
TC 76
TC 37
content resources
ISO/DIS
16642
*Computer applications in terminology —
Terminological markup framework
ISO 13926*Pen systems — Part 2: Plunger
2:2011/DAmd stoppers for pen-injectors for medical
1
use — Amendment 1
TC 38
Textiles
TC 83
ISO/DIS 105G01
*Textiles — Tests for colour fastness —
Part G01: Colour fastness to nitrogen
oxides
(Revision of ISO 105-G01:1993, ISO
105-G01:1993/Cor 1:1995)
and equipment
ISO/DIS
20957-9
*Stationary training equipment — Part 9:
Elliptical trainers, additional specific
safety requirements and test methods
TC 39
Machine tools
TC 94
ISO/DIS
17543-1
*Machines tools — Test conditions for
accessory spindle heads — Part 1:
Horizontal spindle machines
and equipment
TC 45
ISO 17491*Protective clothing — Test methods for
4:2008/DAmd clothing providing protection against
1
chemicals — Part 4: Determination of
resistance to penetration by a spray of
liquid (spray test) — Amendment 1
ISO/DIS 6505 *Rubber, vulcanized or thermoplastic —
Determination of tendency to adhere to
and corrode metals
ISO/DIS
11344
TC 108
*Rubber, raw synthetic — Determination
of the molecular-mass distribution of
solution polymers by gel permeation
chromatography
11344:2004/Cor 1:2008)
ISO 10816*Mechanical vibration — Evaluation of
6:1995/DAmd machine vibration by measurements on
1
non-rotating parts — Part 6:
Reciprocating machines with power
ratings above 100 kW — Amendment 1
TC 122
Packaging
ISO/DIS 780
*Packaging — Distribution packaging —
Graphical symbols for handling and
storage of packages
ISO/DIS 4633 *Rubber seals — Joint rings for water
supply, drainage and sewerage pipelines
— Specification for materials
ISO/DIS
15394
*Packaging — Bar code and twodimensional symbols for shipping,
transport and receiving labels
TC 61
Plastics
ISO/DIS
6721-10
*Plastics — Determination of dynamic
mechanical properties — Part 10:
Complex shear viscosity using a parallelplate oscillatory rheometer
ISO/DIS
28219
*Packaging — Labelling and direct
product marking with linear bar code and
two-dimensional symbols
TC 130
Graphic technology
ISO/DIS
2834-2
*Graphic technology — Laboratory
preparation test prints — Part 2: Liquid
printing inks
ISO/DIS
18517
ISO/DIS
17855-2
Hardness testing — Introduction and
guide
*Plastics — Polyethylene (PE) moulding
and extrusion materials — Part 2:
127
ISO/DIS
17972-4
*Graphic technology — Colour data
exchange format (CxF/X) — Part 4: Spot
colour characterisation data (CxF/X-4)
TC 131
Fluid power systems
ISO/DIS
1219-3
*Fluid power systems and components
— Graphical symbols and circuit
diagrams — Part 3: Symbol modules and
connected symbols in circuit diagrams
ISO/DIS
6020-3
*Hydraulic fluid power — Mounting
dimensions for single rod cylinders, 16
MPa (160 bar) series — Part 3: Compact
series with bores from 250 mm to 500
mm
ISO/DIS 5781 *Hydraulic fluid power — Pressurereducing valves, sequence valves,
unloading valves, throttle valves and
check valves — Mounting surfaces
ISO/DIS
18488
*Polyethylene (PE) materials for piping
systems — Determination of Strain
Hardening Modulus in relation to slow
crack growth — Test method
ISO/DIS
18489
ISO/DIS
19694-6
Determination of greenhouse gas (GHG)
emissions in energy-intensive industries
— Part 6: Ferroalloy industry
TC 155
Nickel and nickel alloys
ISO/DIS
7530-1
*Nickel alloys — Flame atomic
absorption spectrometric analysis — Part
1: Determination of cobalt, chromium,
copper, iron and manganese
(Revision of ISO 7530-1:1990, ISO 75302:1990, ISO 7530-3:1990, ISO 75304:1990, ISO 7530-5:1990, ISO 75306:1990)
TC 159
Ergonomics
ISO/DIS 6385 *Ergonomic principles in the design of
work systems
ISO/DIS 7368 *Hydraulic fluid power — Two-port slip-in
cartridge valves — Cavities
TC 138
— Part 5: Lime industry
*Polyethylene (PE) materials —
Determination of resistance to slow crack
growth under cyclic loading — Cracked
Round Bar test method
TC 146
Air quality
ISO/DIS
19694-1
— Part 1: General aspects
ISO/DIS
19694-2
Greenhouse Gas (GHG) emissions in
energy-intensive industries — Part 2:
Iron and steel industry
ISO/DIS
19694-3
— Part 3: Cement industry
ISO/DIS
19694-4
— Part 4: Aluminium industry
ISO/DIS
19694-5
TC 172
ISO/DIS
17123-8
*Optics and optical instruments — Field
procedures for testing geodetic and
surveying instruments — Part 8: GNSS
field measurement systems in real-time
kinematic (RTK)
ISO/DIS
19045
products — Method for evaluating
Acanthamoeba encystment by contact
lens care products
TC 173
disability
ISO/DIS
17966
*Assistive products for personal hygiene
that support users -Requirements and test methods
TC 185
excessive pressure
ISO/DIS
4126-11
*Safety devices for protection against
excessive pressure — Part 11:
Performance testing
TC 188
Small craft
ISO/DIS
16315.3
*Small craft — Electric propulsion system
TC 189
Ceramic tile
ISO/DIS
14448
*Low modulus adhesives for exterior tile
finishing
TC 190
Soil quality
ISO/DIS
*Soil quality — Quality of solid samples
128
18187
— Solid contact test using the
dehydrogenase activity of Arthrobacter
globiformis
ISO/DIS
18311
*Soil quality — Method for testing effects
of soil contaminants on the feeding
activity of soil dwelling organisms —
Bait-lamina test
TC 195
equipment
ISO/DIS
17740-1
equipment — Concrete placing systems
for stationary equipment — Part 1:
specifications
TC 206
Fine ceramics
ISO/DIS
17859
Measurement method of piezoelectric
strain at high electric field
TC 207
ISO/DIS
14001
*Environmental management systems —
Requirements with guidance for use
14001:2004/Cor 1:2009)
TC 211
ISO/DIS
19162
*Geographic information — Well known
text representation of coordinate
reference systems
TC 213
ISO/DIS
10360-12
*Geometrical Product Specifications
(GPS) — Acceptance and reverification
tests for coordinate measuring systems
(CMS) — Part 12: Articulated arm
coordinate measurement machines
(CMM)
TC 215
Health informatics
ISO/DIS
21298
*Health informatics — Functional and
structural roles
ISO/DIS
21549-7
*Health informatics — Patient healthcard
data — Part 7: Medication data
TC 221
Geosynthetics
ISO/DIS
18325
*Geosynthetics — Test method for the
determination of water discharge
capacity for prefabricated vertical drains
CASCO
ISO/IEC DIS
17021-1.2
*Conformity assessment —
and certification of management systems
— Part 1: Requirements
JTC 1
ISO/IEC DIS
19987
*Information technology — EPC
Information services — Specification
ISO/IEC DIS
19988
*Information technology — GS1 Core
business vocabulary (CBV)
ISO/IEC DIS
27033-1
techniques — Network security — Part 1:
Overview and concepts
ISO/IEC DIS
27034-2
techniques — Application security —
Part 2: Organization normative
framework
ISO/IEC DIS
18046-4
*Information technology — Radio
frequency identification device
performance test methods — Part 4:
Test methods for performance of RFID
gates in libraries
ISO/IEC DIS
24770-62
*Information technology — Real-time
locating system (RTLS) device
performance test methods — Test
methods for air interface communication
at 2,4 GHz — Part 62: Low rate pulse
repetition frequency Ultra Wide Band
(UWB) air interface
ISO/IEC DIS
29167-14
techniques — Part 14: Crypto suite AES
OFB security services for air interface
communications
ISO/IEC DIS
15944-20
*Information technology — Business
Operational View — Part 20: Linking
business operational view to functional
service view
PROJETS FINALS
er
Période du 1 août 2014 au 31 août 2014.
IIW
ISO/FDIS
10447
*Resistance welding — Peel and chisel
testing of resistance spot and projection
welds
129
ISO/FDIS
14323
*Resistance welding — Destructive testing
of welds — Specimen dimensions and
procedure for impact tensile shear test
and cross-tension testing of resistance
spot and embossed projection welds
TC 6
ISO/FDIS
8784-1
*Pulp, paper and board — Microbiological
examination — Part 1: Enumeration of
bacteria and bacterial spores based on
disintegration
TC 30
conduits
ISO/FDIS
10790
*Measurement of fluid flow in closed
conduits — Guidance to the selection,
installation and use of Coriolis meters
(mass flow, density and volume flow
measurements)
10790:1999/Amd 1:2003)
TC 38
Textiles
ISO/FDIS
17617
*Textiles — Determination of moisture
drying rate
TC 41
ISO/FDIS
13050
*Synchronous belt drives — Metric pitch,
curvilinear profile systems G, H, R and S,
belts and pulleys
TC 44
ISO/FDIS
23277
*Non-destructive testing of welds —
Penetrant testing of welds — Acceptance
levels
TC 10
ISO/FDIS
17599
*Technical product documentation (TPD)
— General requirements of digital mockup for mechanical products
TC 20
ISO/FDIS
16694
*Space systems — The measured
parameters at firing bench and flight tests
of liquid rocket engines
TC 21
fighting
ISO/FDIS
6182-12
test methods for grooved-end components
for steel pipe systems
ISO
*Equipment used in gas welding, cutting
5175:1987/FDA and allied processes — Safety devices for
md 1
fuel gases and oxygen or compressed air
— General specifications, requirements
and tests — Amendment 1
TC 22
Road vehicles
TC 67
ISO/FDIS
16844-4
*Road vehicles — Tachograph systems —
Part 4: CAN interface
industries
ISO/FDIS
16844-6
Part 6: Diagnostics
ISO/FDIS
12736
Wet thermal insulation coatings for
pipelines, flow lines, equipment and
subsea structures
ISO/FDIS
16844-7
Part 7: Parameters
TC 76
TC 23
and forestry
ISO/FDIS
11418-5
ISO/FDIS
24631-5
*Radio frequency identification of animals
— Part 5: Procedure for testing the
capability of non-synchronized RFID
transceivers of reading ISO 11784 and
ISO 11785 transponders
*Containers and accessories for
pharmaceutical preparations — Part 5:
Dropper assemblies
TC 106
Dentistry
TC 29
Small tools
ISO/FDIS
12164-4
*Hollow taper interface with flange contact
surface — Part 4: Dimensions of receivers
for stationary tools
ISO/FDIS 9687 *Dentistry — Graphical symbols for dental
equipment
TC 110
Industrial trucks
ISO/FDIS
— Part 12: Industrial variable-reach trucks
130
22915-12
handling freight containers of 6 m (20 ft)
length and longer
TC 118
ISO/FDIS
10439-1
ISO/FDIS
10439-3
ISO/FDIS
10439-4
*Petroleum, petrochemical and natural gas
industries — Axial and centrifugal
compressors and expander-compressors
— Part 1: General requirements
— Part 3: Integrally geared centrifugal
compressors
— Part 4: Expander-compressors
TC 131
Fluid power systems
ISO/FDIS
6953-1
*Pneumatic fluid power — Compressed air
pressure regulators and filter-regulators —
Part 1: Main characteristics to be included
in literature from suppliers and productmarking requirements
ISO/FDIS
6953-2
TC 138
*Pneumatic fluid power — Compressed air
pressure regulators and filter-regulators —
Part 2: Test methods to determine the
main characteristics to be included in
literature from suppliers
ISO/FDIS 3458 *Plastics piping systems — Mechanical
joints between fittings and pressure pipes
— Test method for leaktightness under
internal pressure
ISO/FDIS 3459 *Plastic piping systems — Mechanical
negative pressure
ISO/FDIS 3503 *Plastics piping systems — Mechanical
internal pressure of assemblies subjected
to bending
ISO/FDIS
*Thermoplastics pipes — Determination of
6259-1
tensile properties — Part 1: General test
method
ISO/FDIS
13951.2
Plastics piping systems — Test method for
the resistance of polyolefin pipe/pipe or
pipe/fitting assemblies to tensile loading
ISO/FDIS
17778
*Plastics piping systems — Fittings, valves
and ancillaries — Determination of
gaseous flow rate/pressure drop
relationships
TC 142
gases
ISO/FDIS
15957
*Test dusts for evaluating air cleaning
equipment
TC 150
ISO/FDIS
13779-6
*Implants for surgery — Hydroxyapatite —
Part 6: Powders
TC 156
ISO/FDIS 7441 *Corrosion of metals and alloys —
Determination of bimetallic corrosion in
atmospheric exposure corrosion tests
TC 158
ISO/FDIS 6141 *Gas analysis — Contents of certificates
for calibration gas mixtures
TC 171
ISO/FDIS
12651-2
*Electronic document management —
Vocabulary — Part 2: Workflow
management
TC 172
ISO/FDIS
9022-2
test methods — Part 2: Cold, heat and
humidity
ISO/FDIS
9022-20
test methods — Part 20: Humid
atmosphere containing sulfur dioxide or
hydrogen sulfide
TC 178
ISO/FDIS
25745-2
*Energy performance of lifts, escalators
and moving walks — Part 2: Energy
calculation and classification for lifts
(elevators)
ISO/FDIS
25745-3
*Energy performance of lifts, escalators
and moving walks — Part 3: Energy
131
Analysis of gases
calculation and classification of escalators
and moving walks
components
PC 245
Cross-border trade of second-hand
goods
*Microturbines applications — Safety
ISO/TS
20245:2014
Cross-border trade of second-hand goods
TC 238
Solid biofuels
TC 4
Rolling bearings
ISO/FDIS
16993
*Solid biofuels — Conversion of analytical
results from one basis to another
ISO 32901:2014
*Rolling bearings — Balls — Part 1: Steel
balls
ISO/FDIS
16994
*Solid biofuels — Determination of total
content of sulfur and chlorine
ISO 32902:2014
Ceramic balls
ISO/FDIS
16995
*Solid biofuels — Determination of the
water soluble chloride, sodium and
potassium content
TC 6
TC 242
Energy Management
ISO/FDIS
50015
Measurement and verification of energy
performance of organizations — General
principles and guidance
TC 192
Gas turbines
ISO/FDIS
19372
JTC 1
ISO 2758:2014 Paper — Determination of bursting
strength
ISO/IEC 15444-*Information technology — JPEG 2000
1:2004/FDAmd image coding system: Core coding system
8
— Part 1: — Amendment 8: Profiles for an
interoperable master format IMF
ISO/IEC 23002-*Information technology — MPEG video
4:2014/FDAmd technologies — Part 4: Video tool library
1
— Amendment 1: Graphics tool library
(GTL) for the reconfigurable multimedia
coding (RMC) framework
ISO 56307:2014
*Paper and board — Accelerated ageing
— Part 7: Exposure to light
TC 20
ISO
21100:2014
*Air cargo unit load devices —
parameters
TC 21
fighting
ISO 724028:2014
28: Fire protection control equipment
TC 22
Road vehicles
ISO/TS
18571:2014
*Road vehicles — Objective rating metric
for non-ambiguous signals
ISO/IEC 23003-*Information technology — MPEG audio
2:2010/FDAmd technologies — Part 2: Spatial Audio
3
Object Coding (SAOC) — Amendment 3:
Dialog enhancement
ISO/TS 15007- *Road vehicles — Measurement of driver
2:2014
visual behaviour with respect to transport
information and control systems — Part 2:
Equipment and procedures
15459-2
Registration procedures
TC 29
Small tools
ISO 266231:2014
*Polygonal taper interface with flange
contact surface — Part 1: Dimensions and
designation of shanks
ISO 266232:2014
*Polygonal taper interface with flange
contact surface — Part 2: Dimensions and
designation of receivers
ISO 56101:2014
Tool holders with rectangular shank for
indexable inserts — Part 1: General
survey, correlation and determination of
dimensions
ISO 56102:2014
indexable inserts — Part 2: Style A
NORMES PUBLIEES
er
Nouvelles Normes internationales publiées entre le 1 août
2014 et le 31 août 2014.
anglais seulement
IIW
ISO 56103:2014
indexable inserts — Part 3: Style B
ISO/TR
13392:2014
*Health and safety in welding and allied
processes — Arc welding fume
ISO 5610-
132
4:2014
indexable inserts — Part 4: Style D
ISO 56105:2014
indexable inserts — Part 5: Style F
ISO 56106:2014
indexable inserts — Part 6: Style G
ISO 56107:2014
indexable inserts — Part 7: Style J
ISO 56108:2014
ISO 100814:2014
Classification of dense shaped refractory
products — Part 4: Special products
TC 34
Food products
ISO
15163:2012
*Milk and milk products — Calf rennet and
adult bovine rennet — Determination by
chromatography of chymosin and bovine
pepsin contents
indexable inserts — Part 8: Style K
ISO/TS
17758:2014
Instant dried milk — Determination of the
dispersibility and wettability
ISO 56109:2014
indexable inserts — Part 9: Style L
ISO 561010:2014
indexable inserts — Part 10: Style N
ISO/TR 6579- Microbiology of the food chain —
3:2014
enumeration and serotyping of Salmonella
— Part 3: Guidelines for serotyping of
Salmonella spp.
ISO 561011:2014
indexable inserts — Part 11: Style R
ISO/TS
17383:2014
ISO 561012:2014
indexable inserts — Part 12: Style S
*Determination of the triacylglycerol
composition of fats and oils —
Determination by capillary gas
chromatography
ISO 561013:2014
indexable inserts — Part 13: Style T
ISO
18301:2014
ISO 561014:2014
indexable inserts — Part 14: Style H
Determination of conventional mass per
volume (litre weight in air) — Oscillating Utube method
ISO 561015:2014
indexable inserts — Part 15: Style V
ISO
22004:2014
Food safety management systems —
Guidance on the application of ISO 22000
TC 38
Textiles
TC 30
conduits
ISO
11092:2014
ISO 40641:2014
Water meters for cold potable water and
hot water — Part 1: Metrological and
technical requirements
Textiles — Physiological effects —
Measurement of thermal and water-vapour
resistance under steady-state conditions
(sweating guarded-hotplate test)
ISO 40642:2014
hot water — Part 2: Test methods
ISO
18184:2014
Textiles — Determination of antiviral
activity of textile products
ISO 40643:2014
hot water — Part 3: Test report format
ISO 105B01:2014
Textiles — Tests for colour fastness —
Part B01: Colour fastness to light: Daylight
ISO 40644:2014
hot water — Part 4: Non-metrological
requirements not covered in ISO 4064-1
ISO 105B02:2014
Textiles — Tests for colour fastness —
Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test
TC 43
Acoustics
ISO 40645:2014
hot water — Part 5: Installation
requirements
ISO 129131:2014
Acoustics — Soundscape — Part 1:
Definition and conceptual framework
TC 31
TC 44
ISO 42501:2014
Earth-mover tyres and rims — Part 1: Tyre
designation and dimensions
ISO 42502:2014
Earth-mover tyres and rims — Part 2:
Loads and inflation pressures
ISO 57751:2014
Bicycle tyres and rims — Part 1: Tyre
designations and dimensions
TC 33
Refractories
ISO 9453:2014 Soft solder alloys — Chemical
compositions and forms
TC 45
ISO 3994:2014 Plastics hoses — Helical-thermoplasticreinforced thermoplastics hoses for
suction and discharge of aqueous
materials — Specification
ISO 8029:2014 Plastics hose — General-purpose
133
collapsible water hose, textile-reinforced
— Specification
ISO 1887:2014 *Textile glass — Determination of
combustible-matter content
ISO 8330:2014 *Rubber and plastics hoses and hose
assemblies — Vocabulary
ISO
10122:2014
ISO 815-1:2014 *Rubber, vulcanized or thermoplastic —
Determination of compression set — Part
1: At ambient or elevated temperatures
*Reinforcement materials — Tubular
braided sleeves — Basis for a
specification
TC 67
industries
ISO 61013:2014
Rubber — Determination of metal content
3: Determination of copper content
ISO 61014:2014
Rubber — Determination of metal content
4: Determination of manganese content
ISO
18766:2014
Rubber, vulcanized or thermoplastic —
ISO 249:2014 Rubber, raw natural — Determination of
dirt content
TC 46
ISO 285601:2014
in libraries — Part 1: Data elements and
general guidelines for implementation
ISO 285602:2014
in libraries — Part 2: Encoding of RFID
data elements based on rules from
ISO/IEC 15962
ISO/TS 16530- *Well integrity — Part 2: Well integrity for
2:2014
the operational phase
TC 84
products and catheters
ISO/TR
19244:2014
*Guidance on transition periods for
standards developed by ISO/TC 84 —
products and catheters
TC 85
ISO
16424:2012
Nuclear energy — Evaluation of
homogeneity of Gd distribution within
gadolinium fuel blends and determination
of Gd2O3 content in gadolinium fuel
pellets by measurements of uranium and
gadolinium elements
TC 92
Fire safety
*Fire tests — Calibration and use of heat
flux meters — Part 4: Guidance on the use
of heat flux meters in fire tests
ISO 285603:2014
in libraries — Part 3: Fixed length
encoding
ISO 149344:2014
TC 54
Essential oils
ISO
16385:2014
Essential oil of molle (Schinus areira L.),
Argentinean type
ISO/TR 12468- *External exposure of roofs to fire
3:2014
— Part 3: Commentary
TC 58
Gas cylinders
ISO 111192:2012/Amd
1:2014
*Gas cylinders — Refillable composite gas
cylinders and tubes — Design,
construction and testing — Part 2: Fully
wrapped fibre reinforced composite gas
cylinders and tubes up to 450 l with loadsharing metal liners — Amendment 1
TC 59
ISO/TR 15686- *Buildings and constructed assets —
11:2014
Service life planning — Part 11:
Terminology
TC 60
Gears
ISO/TR 15144- *Calculation of micropitting load capacity
1:2014
of cylindrical spur and helical gears —
Part 1: Introduction and basic principles
TC 61
Plastics
TC 94
and equipment
ISO
12311:2013
Personal protective equipment — Test
methods for sunglasses and related
eyewear
TC 96
Cranes
ISO
12482:2014
*Cranes — Monitoring for crane design
working period
ISO
16715:2014
*Cranes — Hand signals used with cranes
TC 106
Dentistry
ISO
15841:2014
Dentistry — Wires for use in orthodontics
TC 108
ISO 202834:2012/Amd
134
1:2014
propulsion machinery — Amendment 1
TC 119
Powder metallurgy
ISO 171231:2014
*Optics and optical instruments — Field
procedures for testing geodetic and
surveying instruments — Part 1: Theory
ISO 4490:2014 Metallic powders — Determination of flow
rate by means of a calibrated funnel (Hall
flowmeter)
ISO 119792:2014
— Part 2: Optical properties and test
methods
TC 131
Fluid power systems
ISO 119797:2014
— Part 7: Clinical investigations
ISO
10766:2014
Hydraulic fluid power — Cylinders —
Housing dimensions for rectangularsection-cut bearing rings for pistons and
rods
ISO 119799:2006/Amd
1:2014
— Part 9: Multifocal intraocular lenses —
Amendment 1
TC 145
Graphical symbols
ISO
13212:2014
ISO 38643:2012
*Graphical symbols — Safety colours and
safety signs — Part 3: Design principles
for graphical symbols for use in safety
signs
Ophthalmic optics — Contact lens care
products — Guidelines for determination
of shelf-life
TC 178
TC 146
Air quality
ISO/TS
18870:2014
*Lifts (elevators) — Requirements for lifts
used to assist in building evacuation
ISO 222622:2014
Air quality — Bulk materials — Part 2:
Quantitative determination of asbestos by
gravimetric and microscopical methods
TC 181
Safety of toys
ISO 81242:2014
*Safety of toys — Part 2: Flammability
ISO 1600030:2014
Indoor air — Part 30: Sensory testing of
indoor air
ISO 81246:2014
TC 150
*Safety of toys — Part 6: Certain phthalate
esters in toys and children's
products
ISO 147081:2014
*Implants for surgery — Active implantable
medical devices — Part 1: General
requirements for safety, marking and for
information to be provided by the
manufacturer
ISO/TR 8124- *Safety of toys — Part 8: Age
8:2014
determination guidelines
TC 188
Small craft
ISO 61853:2014
Inflatable boats — Part 3: Boats with a hull
length less than 8 m with a motor rating of
15 kW and greater
TC 189
Ceramic tile
ISO 105454:2014
Ceramic tiles — Part 4: Determination of
TC 194
Biological and clinical evaluation of
medical devices
ISO/TR
37137:2014
Cardiovascular biological evaluation of
medical devices — Guidance for
absorbable implants
TC 195
ISO 235516:2014
Particular requirements — Part 6:
Thermoelectric flame supervision controls
equipment
ISO 215731:2014
TC 172
equipment — Concrete pumps — Part 1:
specifications
ISO
10109:2014
*Optics and photonics — Guidance for the
selection of environmental tests
TC 201
ISO
15362:2014
*Stereomicroscopes — Information
provided to the user
ISO
13095:2014
*Surface Chemical Analysis — Atomic
force microscopy — Procedure for in situ
characterization of AFM probe shank
profile used for nanostructure
TC 157
ISO 4074:2014 Natural rubber latex male condoms —
TC 159
Ergonomics
ISO
24504:2014
Sound pressure levels of spoken
announcements for products and public
address systems
TC 161
135
measurement
Generation of universally unique identifiers
(UUIDs) and their use in object identifiers
TC 206
Fine ceramics
ISO
17947:2014
for chemical analysis of fine silicon nitride
powders
ISO/IEC 13157- *Information technology —
1:2014
exchange between systems — NFC
Security — Part 1: NFC-SEC NFCIP-1
security services and protocol
TC 212
Clinical laboratory testing and in vitro
diagnostic test systems
ISO/IEC
19369:2014
ISO
15189:2012
Medical laboratories — Requirements for
quality and competence
exchange between systems — NFCIP-2
test methods
TC 213
ISO/IEC
24771:2014
ISO 25381:2014
— Wedges — Part 1: Series of angles and
slopes
exchange between systems — MAC/PHY
standard for ad hoc wireless network to
support QoS in an industrial work
environment
ISO 25382:2014
— Wedges — Part 2: Dimensioning and
tolerancing
ISO/IEC TR
29110-5-62:2014
TC 215
Health informatics
ISO/HL7
21731:2014
*Health informatics — HL7 version 3 —
Reference information model — Release 4
Lifecycle profiles for Very Small Entities
(VSEs) — Part 5-6-2: Systems
engineering — Management and
engineering guide: Generic profile group:
Basic profile
TC 244
ISO 135774:2014
Protective systems
TC 254
amusement devices
ISO/TS
17929:2014
*Biomechanical effects on amusement
ride passengers
TC 261
Additive manufacturing
ISO 172963:2014
principles — Part 3: Main characteristics
and corresponding test methods
4:2013/Cor
cards — Part 4: Organization, security and
1:2014
commands for interchange — Technical
Corrigendum 1
ISO 172964:2014
principles — Part 4: Overview of data
processing
ISO/IEC
8484:2014
CASCO
ISO/IEC
17020:2012
*Conformity assessment — Requirements
for the operation of various types of
bodies performing inspection
JTC 1
ISO/IEC
10646:2014
Coded Character Set (UCS)
ISO/IEC 7811- *Identification cards — Recording
1:2014
technique — Part 1: Embossing
2:2014
Low coercivity
6:2014
High coercivity
7:2014
High coercivity, high density
ISO/IEC 9834- *Information technology — Procedures for
8:2014
the operation of object identifier
registration authorities — Part 8:
ISO/IEC
*Information technology — Generic
24764:2010/Am cabling systems for data centres —
d 1:2014
Amendment 1
10:2014
audio-visual objects — Part 10: Advanced
Video Coding
ISO/IEC 23000- *Information technology — Multimedia
10:2012/Amd application format (MPEG-A) — Part 10:
1:2014
Surveillance application format —
Amendment 1: Conformance and
reference software
136
*Information technology — Magnetic
stripes on savingsbooks
3:2003
ISO/IEC 23003- *Information technology — MPEG audio
2:2010/Cor
technologies — Part 2: Spatial Audio
2:2014
Object Coding (SAOC) — Technical
Corrigendum 2
ISO/IEC 29167- *Information technology — Automatic
1:2014
— Part 1: Security services for RFID air
interfaces
ISO/IEC
26300:2006/Am Document Format for Office Applications
d 1:2012/Cor (OpenDocument) v1.0 — Amendment 1:
1:2014
Open Document Format for Office
Applications (OpenDocument) v1.1 —
ISO/IEC
26300:2006/Co Document Format for Office Applications
r 3:2014
(OpenDocument) v1.0 — Technical
Corrigendum 3
ISO/IEC 19788- *Information technology — Learning,
1:2011/Amd
1:2014
learning resources — Part 1: Framework
— Amendment 1
2:2005/Amd
interchange formats — Part 2: Finger
1:2010/Cor
minutiae data — Amendment 1: Detailed
2:2014
description of finger minutiae location,
direction, and type — Technical
Corrigendum 2
ISO 149524:2003
(reconfirmed)
ISO 149525:2003
(reconfirmed)
ISO 149526:2003
(reconfirmed)
ISO
22009:2009
ISO
23038:2006
(reconfirmed)
ISO
24637:2009
ISO
26870:2009
TC 22
Road vehicles
ISO 104831:2004
(reconfirmed)
ISO 104832:1996
(reconfirmed)
ISO 120973:2002
(reconfirmed)
TC 33
Refractories
NORMES CONFIRMEES
ans:
ISO 50191:1984
(reconfirmed)
ISO 50192:1984
(reconfirmed)
TC 10
ISO 50193:1984
(reconfirmed)
ISO 50194:1988
(reconfirmed)
ISO/TS 12871:2010
TC 20
(reconfirmed)
ISO 50195:1984
(reconfirmed)
ISO 86684:1993
(reconfirmed)
ISO 50196:2005
(reconfirmed)
ISO 86686:1994
ISO 86561:1988
(reconfirmed)
ISO 149521:2003
(reconfirmed)
ISO 149522:2003
(reconfirmed)
ISO 14952-
(reconfirmed)
ISO 100592:2003
137
(reconfirmed)
ISO
10060:1993
(reconfirmed)
4:2005
(reconfirmed)
ISO 85286:2005
(reconfirmed)
ISO 100811:2003
(reconfirmed)
ISO 100812:2003
(reconfirmed)
ISO 852810:1998
(reconfirmed)
ISO 852812:1997
(reconfirmed)
ISO 100813:2003
TC 34
Food products
ISO 79711:2009
ISO 111021:1997
(reconfirmed)
(reconfirmed)
ISO
11051:1994
(reconfirmed)
ISO 111022:1997
(reconfirmed)
ISO
11052:1994
(reconfirmed)
ISO
14314:2004
(reconfirmed)
ISO
14396:2002
(reconfirmed)
ISO 214153:2006
TC 71
ISO
24557:2009
TC 43
Acoustics
ISO 19208:2009
ISO
10053:1991
(reconfirmed)
TC 72
TC 46
ISO 96-1:2009
ISO 96-2:2009
ISO
21047:2009
TC 70
TC 92
Fire safety
ISO/TR 97052:2001
ISO/TR 116961:1999
ISO 30461:2002
(reconfirmed)
ISO
12863:2010
ISO 30465:2001
(reconfirmed)
ISO/TR
17252:2008
TC 96
Cranes
ISO 79674:2005
(reconfirmed)
TC 102
ISO 79676:2005
(reconfirmed)
ISO 25981:1992
(reconfirmed)
ISO 79677:2005
(reconfirmed)
ISO 25982:1992
(reconfirmed)
ISO 85281:2005
(reconfirmed)
ISO 85282:2005
(reconfirmed)
ISO 46871:1992
ISO 8528-
(reconfirmed)
(reconfirmed)
138
ISO
11459:1997
(reconfirmed)
ISO
13310:1997
(reconfirmed)
ISO
13311:1997
(reconfirmed)
TC 106
Dentistry
ISO
20127:2005
(reconfirmed)
TC 138
ISO 82833:1992
(reconfirmed)
(reconfirmed)
ISO 202421:2005
(reconfirmed)
JTC 1
NORMES ANNULEES
er
Période du 1 août 2014 au 31 août 2014.
(reconfirmed)
Ergonomics
1:2007
TC 163
ISO 161003:2005
ISO/IEC
21827:2008
ISO
24033:2009
TC 159
(reconfirmed)
ISO 161005:2009
ISO/TR
16913:1999
ISO 161002:2003
TC 20
ISO
17399:2003
(replaced by )
TC 22
Road vehicles
ISO 135551:2003
(replaced by )
ISO 135552:2003
(replaced by )
ISO/TS
12104:2003
(replaced by )
TC 34
Food products
ISO/TS
22004:2005
TC 68
Financial services
TC 183
Copper, lead, zinc and nickel ores and
concentrates
ISO
11441:1995
(reconfirmed)
ISO
12740:1998
(reconfirmed)
ISO
13545:2000
(reconfirmed)
ISO 99921:1990
(replaced by )
ISO
15249:1998
(reconfirmed)
TC 70
(replaced by )
TC 184
ISO 817811:2006
ISO
13281:1997
(reconfirmed)
TC 79
ISO 157452:2003
(reconfirmed)
ISO 157453:2003
(reconfirmed)
ISO 157454:2003
(reconfirmed)
TC 86
TC 92
Fire safety
4:2007
TC 96
139
Cranes
ISO 124821:1995
TC 119
Powder metallurgy
TC 172
ISO 101091:2005
ISO 101096:2005
ISO 101097:2001
ISO 101098:2005
ISO 1010911:2001
ISO 1010912:2004
ISO
11985:1997
(replaced by )
ISO
12864:1997
(replaced by )
TC 213
ISO 2538:1998 (replaced by ISO 2538-1:2014, ISO 25382:2014)
TMBG
140
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
Période du 1er septembre 2014 au 30 septembre 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
Nieuwe publicaties
Frans.
TC 5
Tuyauteries en métaux ferreux et
raccords métalliques
ISO/DIS
16631
*Tuyaux, raccords et accessoires en
fonte ductile et leurs assemblages
compatibles avec les systèmes de
tuyauteries plastiques (PVC et PE) pour
les usages de l’eau
TC 6
Papiers, cartons et pâtes
ISO/DIS
11475
*Papier et carton — Détermination du
degré de blanc CIE, D65/10 degrés
(lumière du jour extérieure)
TC 8
Navires et technologie maritime
ISO/DIS
17905
*Titre manque
TC 17
Acier
ISO/DIS
17745
*Panneaux de filet de maille fil d’acier à
anneaux — Définitions et spécifications
ISO/DIS
17746
*Panneaux de filet de maille en câble
d’acier — Définitions et spécifications
TC 20
Aéronautique et espace
ISO/DIS
4118.2
*Fret aérien — Conteneurs non-certifiés
de pont inférieur — Conception et essais
ISO/DIS
18423
*Systèmes de transfert des informations
et données spatiales — Systèmes de
mesure du pseudo-bruit
ISO/DIS
20104
*Titre manque
ISO/DIS
21459
et données spatiales — Protocole pour
liaisons spatiales de proximité 1 — Souscouche de codage et synchronisation
ISO/DIS
21460
141
liaisons spatiales de proximité 1 —
Couche physique
ISO
*Analyse sensorielle — Méthodologie —
11056:1999/D Méthode d’estimation de la grandeur —
Amd 2
Amendement 2
ISO/DIS
22663
liaisons spatiales de proximité 1 —
Couche de liaisons de données
ISO/DIS
13299
Directives générales pour l’établissement
d’un profil sensoriel
TC 21
Équipement de protection et de lutte
contre l’incendie
TC 35
Peintures et vernis
ISO/DIS
7240-29
*Systèmes de détection et d’alarme
d’incendie — Partie 29:
TC 22
Véhicules routiers
ISO/DIS
22900-2
*Véhicules routiers — Interface de
communication modulaire du véhicule
(MVCI) — Partie 2: Interface de
programmation d’application d’unité de
données du protocole de diagnostic (DPDU API)
ISO/DIS 1514 *Peintures et vernis — Panneaux
normalisés pour essai
IEC/DIS
62752.2
Appareil de contrôle et de protection
intégré au câble pour la charge en mode
2 des véhicules électriques (IC-CPD)
ISO/DIS
18246
*Cyclomoteurs et motocycles à
propulsion électrique — Exigences de
sécurité relatives au couplage conductif
à une station extérieure d’alimentation
d’énergie
TC 23
Tracteurs et matériels agricoles et
forestiers
ISO/DIS 7216 *Tracteurs agricoles et forestiers —
Mesurage du bruit émis en mouvement
TC 31
Pneus, jantes et valves
ISO/DIS
17464
*Chambres à air pneumatiques pour
véhicules automobiles — Exigences
techniques et méthodes d’essai
TC 34
Produits alimentaires
ISO/DIS
7304-1
*Semoule de blé dur et pâtes
alimentaires — Évaluation de la qualité
culinaire des pâtes par analyse
sensorielle — Partie 1: Méthode de
référence
ISO/DIS
19344
*Produits laitiers fermentés —
Quantification de bactéries lactiques
acidifiantes — Méthode de cytométrie en
flux
ISO/DIS
11997-1
*Peintures et vernis — Détermination de
la résistance aux conditions de corrosion
cyclique — Partie 1: Brouillard
salin/sécheresse/humidité
ISO/DIS
8503-5
*Préparation des subjectiles d’acier
avant application de peintures et de
produits assimilés — Caractéristiques de
rugosité des subjectiles d’acier décapés
— Partie 5: Méthode de l’empreinte sur
ruban adhésif pour la détermination du
profil de surface
TC 38
Textiles
ISO/DIS
17881-1
*Textiles — Détermination de certains
retardateurs de flamme — Partie 1:
Retardateurs de flamme bromés
ISO/DIS
17881-2
*Textiles — Détermination de certains
retardateurs de flamme — Partie 2:
Retardateurs de flamme phosphorés
ISO/DIS
18782
*Textiles — Détermination de la
production de chaleur dynamique
hygroscopique
ISO/DIS 105G04
*Textiles — Essais de solidité des coloris
— Partie G04: Solidité des coloris à
l’oxyde nitrique en atmosphère à taux
d’humidité élevés
(Revision of ISO 105-G04:1989)
TC 39
Machines-outils
ISO/DIS
16092-1
*Sécurité des machines-outils —
Presses — Partie 1: Exigences
générales de sécurité
TC 45
Élastomères et produits à base
d’élastomères
ISO/DIS 34-1
*Caoutchouc vulcanisé ou
thermoplastique — Détermination de la
résistance au déchirement — Partie 1:
Éprouvettes pantalon, angulaire et
croissant
ISO
*Analyse sensorielle — Vocabulaire —
5492:2008/DA Amendement 1
md 1
142
ISO/DIS 34-2
*Caoutchouc vulcanisé ou
thermoplastique — Détermination de la
résistance au déchirement — Partie 2:
Petites éprouvettes (éprouvettes de
Delft)
ISO/DIS 6133 *Caoutchouc et plastiques — Analyse
des tracés multi-pics obtenus lors des
déterminations de la résistance au
déchirement et de la force d’adhérence
ISO/DIS
18852
*Ingrédients de mélange du caoutchouc
— Détermination de la surface par
adsorption d’azote (NSA) et de la surface
par épaisseur statistique (STSA) par
méthode multipoints
TC 59
Bâtiments et ouvrages de génie civil
ISO/DIS
11528
*Bâtiments et ouvrages de génie civil Mastics - Determination
ISO/DIS
15686-5
*Bâtiments et biens immobiliers
construits — Prévision de la durée de vie
— Partie 5: Approche en coût global
TC 61
Plastiques
ISO/DIS
19069-2
*Plastiques — Polypropylène (PP) pour
moulage et extrusion — Partie 2:
Préparation des éprouvettes et
détermination des propriétés
TC 67
Matériel, équipement et structures en
mer pour les industries pétrolière,
pétrochimique et du gaz naturel
ISO/DIS
17349
*Pétrole et plates-formes en mer de gaz
naturel — Courants contenant des
niveaux élevés de CO2 sous haute
pression et débits élevés — Lignes
directrices
ISO/DIS
17782
*Industries du pétrole, de la pétrochimie
et du gaz naturel — Qualification des
fabricants de matériaux spéciaux
TC 76
Appareils de transfusion, de perfusion
et d’injection et appareils destinés au
traitement du sang à usage médical et
pharmaceutique
ISO/DIS
1135-3
ISO/DIS
8362-5
TC 83
Matériel et équipements de sports et
autres activités de loisirs
ISO/DIS
10958-2
*Surfs des neiges — Zone de montage
de la fixation — Partie 2: Exigences et
méthodes d’essai relatives aux surfs des
neiges munis d’inserts
TC 84
Dispositifs pour administration des
produits médicaux et cathéters
ISO/DIS 8537 *Seringues à insuline, stériles, non
réutilisables, avec ou sans aiguille
TC 85
Énergie nucléaire, technologies
nucléaires, et radioprotection
ISO/DIS
11665-11
*Mesurage de la radioactivité dans
l’environnement — Air: radon 222 —
Partie 11: Méthode d’essai pour le gaz
du sol avec un prélèvement en
profondeur
TC 87
Liège
ISO/DIS 4708 *Aggloméré composé de liège —
Matériau pour joints pour industries
mécaniques — Méthodes d’essai
TC 92
Sécurité au feu
ISO/DIS
16733-1
*Ingénierie de la sécurité incendie —
Sélection de scénarios d’incendie et de
feux de dimensionnement — Partie 1:
Sélection de scénarios d’incendie de
dimensionnement
TC 94
Sécurité individuelle -- Vêtements et
équipements de protection
ISO/DIS
13506-1
*Vêtements de protection contre la
chaleur et la flamme — Partie 1:
Méthode d’essai pour vêtements
complets — Mesurage de l’énergie
transférée à l’aide d’un mannequin
instrumenté
*Matériel de transfusion à usage médical
— Partie 3: Appareils non réutilisables
pour prélèvement de sang
*Récipients et accessoires pour produits
injectables — Partie 5: Bouchons à
lyophilisation pour flacons d’injection
TC 96
ISO 10245*Appareils de levage à charge
2:2014/DAmd suspendue — Limiteurs et indicateurs —
1
Partie 2: Grues mobiles — Amendement
1
ISO
*Appareils de levage à charge
15442:2012/D suspendue — Exigences de sécurité
Amd 1
pour les grues de chargement —
Amendement 1
143
Appareils de levage à charge
suspendue
mesure des tailles et essayage virtuel
TC 106
Médecine bucco-dentaire
ISO/DIS
18397
*Médecine bucco-dentaire —
Instruments pour le détartrage
22374:2005)
TC 108
Vibrations et chocs mécaniques, et
leur surveillance
ISO/DIS
13373-3
*Surveillance et diagnostic d’état des
machines — Surveillance des vibrations
— Partie 3: Lignes directrices pour le
diagnostic
ISO/DIS
13381-1
*Surveillance et diagnostic des machines
— Pronostic — Partie 1: Lignes
directrices générales
TC 110
Chariots de manutention
ISO/DIS
10896-5
*Chariots tout-terrain — Exigences de
sécurité et vérification — Partie 5:
ISO/DIS
18479-1
*Chariots tout-terrain — Plate-formes de
personnel non-integrées — Partie 1:
Conception, exigences de sécurité et
vérification
TC 114
Horlogerie
ISO/DIS
3160-2
*Boîtes de montres et leurs accessoires
— Revêtements d’alliage d’or — Partie
2: Détermination du titre, de l’épaisseur,
de la résistance à la corrosion et de
l’adhérence
TC 123
Paliers lisses
ISO/DIS
19259
*Titre manque
TC 127
Engins de terrassement
ISO
*Engins de terrassement — Système de
10261:2002/D numérotation pour l’identification des
Amd 1
produits — Amendement 1
TC 131
ISO/DIS
15171-2
Transmissions hydrauliques et
pneumatiques
*Raccordements pour transmissions
hydrauliques et pneumatiques et usage
général — Raccords hydrauliques pour
diagnostics — Partie 2: Raccord pour
connexion sous pression
ISO/DIS
18869
*Transmissions hydrauliques —
Méthodes d’essai pour les raccords
actionné avec ou sans outils
TC 133
Systèmes de tailles des vêtements désignation des tailles, méthodes de
ISO/DIS
18825-1
*Habillement — Essayage virtuel —
Partie 1: Vocabulaire et terminologie
utilisés pour le corps humain virtuel
TC 138
Tubes, raccords et robinetterie en
matières plastiques pour le transport
des fluides
ISO/DIS
17885.2
*Systèmes de canalisations en
plastiques — Raccords mécaniques pour
les canalisations sous pression —
Spécifications
10838-2:2000, ISO 14236:2000, ISO
10838-3:2001)
TC 142
Séparateurs aérauliques
ISO/DIS
16890-2
*Filtres à air pour ventilation générale —
Partie 2: Mesurage de l’efficacité
fractionnelle et de la résistance à
l’écoulement de l’air
TC 147
Qualité de l’eau
ISO/DIS
13167
*Qualité de l’eau — Plutonium,
americium, curium et neptunium —
Méthode d’essai par spectrométrie alpha
TC 156
Corrosion des métaux et alliages
ISO/DIS
15257
*Protection cathodique — Niveaux de
compétence des personnes en
protection cathodique — Base pour un
dispositif particulier de certification
TC 161
Dispositifs de commande et de
protection pour les brûleurs et
appareils fonctionnant au gaz et/ou au
fioul
ISO/DIS
23551-9
*Dispositifs de commande et de sécurité
pour brûleurs à fioul et pour appareils à
fioul - Exigences particulières — Partie 9:
Thermostats mécaniques
TC 184
Systèmes d’automatisation et
intégration
IEC/DIS
62264-4
Intégration du système de commande
d’entreprise — Partie 4:
TC 190
Qualité du sol
ISO/DIS
22155
*Qualité du sol — Dosage des
hydrocarbures aromatiques et halogénés
volatils et de certains éthers par
chromatographie en phase gazeuse —
Méthode par espace de tête statique
ISO/DIS
18763
*Qualité du sol — Détermination des
effets toxiques des polluants sur la
germination et la croissance primaire des
144
plantes supérieures
17583
terminologiques pour les éléments de
données codés exprimés dans les types
de données harmonisées ISO utilisés
dans l’échange d’information de soins de
santé
ISO/DIS
21549-5
*Informatique de santé — Données
relatives aux cartes de santé des
patients — Partie 5: Données
d’identification
TC 204
Systèmes intelligents de transport
ISO/DIS
14817-1
*Titre manque — Partie 1:
ISO/DIS
14817-2
ISO/DIS
17438-1
TC 209
Salles propres et environnements
maîtrisés apparentés
ISO/DIS
27799
ISO/DIS
14644-1.2
*Salles propres et environnements
maîtrisés apparentés — Partie 1:
Classification de la propreté particulaire
de l’air
*Informatique de santé — Management
de la sécurité de l’information relative à
la santé en utilisant l’ISO/IEC 27002
TC 228
Tourisme et services connexes
ISO/DIS
13810
*Services touristiques — Tourisme
industriel — Prestation de services
TMBG
Bureau de gestion technique groupes
ISO/IEC
DGuide 17
*Guide de rédaction des normes pour la
prise en compte des besoins des micro,
petites et moyennes entreprises (PME)
JTC 1
Technologies de l’information
ISO/IEC DIS
29110-2
*Ingénierie des systèmes et du logiciel —
Profil de cycle de vie pour très petits
organismes (TPO) — Partie 2: Cadre
Général
ISO/DIS
14644-2.2
TC 210
Surveillance du maintien des
performances de la salle propre pour la
propreté particulaire de l’air
Management de la qualité et aspects
généraux correspondants des
dispositifs médicaux
ISO/DIS
18250-3
*Connecteurs pour systèmes de livraison
de réservoir pour des applications de
soins de santé — Partie 3:
ISO/DIS
80369-3.2
*Raccords de petite taille pour liquides et
gaz utilisés dans le domaine de la santé
— Partie 3: Raccords destinés à des
applications entérales
ISO/IEC DIS
10118-1
*Technologies de l’information —
Techniques de sécurité — Fonctions de
brouillage — Partie 1: Généralités
ISO/DIS
80369-6
*Raccords de petite taille pour liquides et
gaz utilisés dans le domaine de la santé
— Partie 6: Raccords destinés à des
applications neuraxiales
ISO/IEC
291924:2013/DAmd
1
Techniques de sécurité — Cryptographie
pour environnements contraints — Partie
4: Mécanismes basés sur les techniques
asymétriques — Amendement 1
TC 211
Information
géographique/Géomatique
ISO/DIS
19160-1
*Adressage — Partie 1: Modèle
conceptuel
ISO/IEC
159385:2003/DAmd
5
Interface de description du contenu
multimédia — Partie 5: Schémas de
description multimédia — Amendement
5: .
TC 215
Informatique de santé
ISO/DIS
17090-2.2
*Informatique de santé — Infrastructure
de clé publique — Partie 2: Profil de
certificat
ISO/IEC
2300013:2014/DAm
d1
*Technologies de l’information - Format
des applications multimedias — Partie
13: Format pour les Applications de
Realité Augmentée — Amendement 1: .
ISO/IEC
230018:2013/DAmd
1
Technologies des systèmes MPEG —
Partie 8: Points de code indépendants du
codage — Amendement 1: .
ISO/IEC DIS
ISO/DIS
17523
*Informatique de santé — Exigences
applicables aux prescriptions
électroniques
ISO/DIS
*Informatique de santé — Contraintes
145
11179-6
Registres de métadonnées (RM) —
Partie 6: Enregistrement des données
l’équilibre en vase clos
3680:2004)
ISO/IEC DIS
19763-1
*Technologies de l’information — Cadre
du métamodèle pour l’interopérabilité
(MFI) — Partie 1: Structure
TC 34
ISO/FDIS
5527.2
*Céréales — Vocabulaire
ISO/IEC DIS
21320-1
*Technologies de l’information — Fichier
conteneur de document — Partie 1:
Données de base
TC 54
Huiles essentielles
ISO/IEC DIS
19785-1
*Technologies de l’information — Cadre
de formats d’échange biométriques
communs — Partie 1: Spécifications de
données d’élément
ISO/IEC 19785-1:2006/Amd 1:2010)
ISO/FDIS 3064 *Huile essentielle de petitgrain, type
Paraguay (Citrus aurantium L. var.
Paraguay (syn. Citrus aurantium var.
bigaradia Hook f.).)
TC 58
Bouteilles à gaz
ISO/FDIS
21172-1
*Bouteilles à gaz — Fûts soudés de
capacité inférieure ou égale à 3000 litres
destinés au transport des gazes — Partie
1: Capacité jusqu’à 1000 litres
TC 59
ISO/FDIS
16757-1
*Structures de données pour catalogues
électroniques de produits pour les
services du bâtiment — Partie 1:
Concepts, architecture et modèle
ISO/FDIS
16745
*Performance environnementale des
bâtiments — Empreinte carbone des
bâtiments — Stade utilisation
TC 10
Documentation technique de produits
TC 61
Plastiques
ISO/FDIS
16792
*Documentation technique de produits —
Données de définition d’un produit
ISO/FDIS
16396-1
ISO/FDIS
3098-1
Écriture — Partie 1: Prescriptions
générales
*Plastiques — Matériaux polyamides (PA)
pour moulage et extrusion — Partie 1:
Système de désignation, marquage des
produits et base de spécification
ISO/FDIS
19069-1
*Plastiques — Matériaux polypropylène
(PP) pour moulage et extrusion — Partie
1: Système de désignation et base de
spécification
TC 67
ISO/FDIS
15589-1
*Industries du pétrole, de la pétrochimie et
du gaz naturel — Protection cathodique
des systèmes de transport par conduites
— Partie 1: Conduites terrestres
TC 68
Services financiers
ISO/IEC DIS
30108-1.2
PROJETS FINALS
TC 22
Véhicules routiers
ISO/FDIS
16505
*Véhicules routiers — Aspects
ergonomiques et de performance des
caméras embarquées — Exigences et
procédures d’essai
TC 23
forestiers
ISO/FDIS
13693-2
*Matériel d’irrigation — Dispositifs de
sécurité pour l’application de produits
chimiques par irrigation — Partie 2:
Installations de vannes pour application
de produits chimiques par irrigation de DN
75 à DN 350
TC 28
Produits pétroliers et lubrifiants
ISO/FDIS 3679 *Détermination de l’éclair de type
passe/ne passe pas — Méthode rapide à
ISO 9564*Services financiers — Gestion et sécurité
1:2011/FDAmd du numéro personnel d’identification (PIN)
1
— Partie 1: Principes de base et
exigences relatifs aux PINs dans les
systèmes à carte — Amendement 1
146
5: Matériaux élastomères convenant pour
applications industrielles
TC 71
Béton, béton armé et béton
précontraint
ISO/FDIS
10406-1
*Polymère renforcé par des fibres (PRF)
pour l’armature du béton — Méthodes
d’essai — Partie 1: Barres et grilles en
PRF
ISO/FDIS
10406-2
*Polymère renforcé par des fibres (PRF)
pour l’armature du béton — Méthodes
d’essai — Partie 2: Feuilles en PRF
TC 110
ISO/FDIS
5053-1
*Chariots de manutention — Terminologie
et classification — Partie 1: Types de
chariots de manutention
ISO/FDIS
22915-22
*Chariots de manutention — Vérification
de la stabilité — Partie 22: Chariots à
prise latérale -et frontale- avec et sans
poste de conduite élevable
TC 138
des fluides
ISO/FDIS 7509 *Systèmes de canalisations en plastiques
— Tubes en plastiques
thermodurcissables renforcés de verre
(PRV) — Détermination du temps mis
jusqu’à la défaillance sous une pression
interne constante
TC 156
ISO/FDIS
17224
*Corrosion des métaux et alliages —
Méthode d’essai pour essais de corrosion
à haute température de matériaux
métalliques par application d’un dépot de
sel, de cendres ou d’autres substances
ISO/FDIS
17245
métalliques par immersion dans le sel
fondu ou autres liquides dans des
conditions statiques
TC 115
Pompes
ISO/ASME
FDIS 14414
*Evaluation énergétique des systèmes de
pompage
TC 118
Compresseurs, machines portatives
pneumatiques, machines et
équipements pneumatiques
ISO/FDIS
17248
ISO/FDIS
10439-2
*Industries du pétrole, de la pétrochimie et
du gaz naturel — Compresseurs axiaux et
centrifuges et compresseurs-détenteurs —
Partie 2: Compresseurs centrifuges et
axiaux sans multiplicateur intégré
métalliques par enfouissement dans du
sel, des cendres ou d’autres solides
TC 164
Essais mécaniques des métaux
ISO/FDIS
6508-1
*Matériaux métalliques — Essai de dureté
Rockwell — Partie 1: Méthode d’essai
ISO/FDIS
6508-2
Rockwell — Partie 2: Vérification et
étalonnage des machines d’essai et des
pénétrateurs
TC 121
Matériel d’anesthésie et de réanimation
respiratoire
ISO/FDIS
18835
*Systèmes d’anesthésie par inhalation —
Alimentation en vapeur et équipements
annexes
IEC/FDIS
60601-1-11
Appareils électromédicaux — Partie 1-11:
Exigences générales pour la sécurité de
base et les performances essentielles —
Norme collatérale: Exigences pour les
appareils électromédicaux et les systèmes
électromédicaux utilisés dans
l’environnement des soins à domicile
(Revision of IEC 60601-1-11:2010, IEC
60601-1-11:2010/Cor 1:2011)
ISO/FDIS
6508-3
Rockwell — Partie 3: Étalonnage des
blocs de référence
TC 174
Joaillerie, bijouterie
ISO/FDIS
18323
*Bijouterie — Confiance du consommateur
dans l’industrie du diamant
TC 217
Cosmétiques
TC 131
pneumatiques
ISO/FDIS
16128-1
ISO/FDIS
3601-5
*Transmissions hydrauliques et
pneumatiques — Joints toriques — Partie
*Lignes directrices relatives aux définitions
techniques et aux critères applicables aux
ingrédients et produits cosmétiques
naturels et biologiques — Partie 1:
147
Définitions des ingrédients
format de fichier de médias de la base
ISO
TC 242
Management de l’énergie
ISO/FDIS
50004
Systèmes de management de l’énergie —
Lignes directrices pour la mise en oeuvre,
la maintenance et l’amélioration d’un
système de management de l’énergie
ISO/FDIS
50006
*Systèmes de management de l’énergie
— Mesurage de la performance
énergétique à l’aide des performances
énergétiques de référence (PER) et
d’indicateurs de performance énergétique
(IPÉ) — Principes généraux et lignes
directrices
TC 244
Fours industriels et équipements
associés
ISO/FDIS
13574
*Fours industriels et équipements
thermiques associés — Vocabulaire
JTC 1
ISO/IEC FDIS *Technologies de l’information — Vue
15944-4
opérationelle d’affaires — Partie 4:
Scénarios de transactions d’affaires —
Ontologie comptable et économique
ISO/IEC FDIS *Technologies de l’information —
29197
Méthodologie de l’évaluation de l’influence
environnementale dans la performance
d’un système biométrique
ISO/IEC FDIS *Titre manque
19395
ISO/IEC FDIS *Ingénierie du système et du logiciel —
30121
Technologies de l’information —
Gouvernance du cadre de risque
forensique numérique
ISO/IEC/IEEE Technologies de l’information —
FDIS 8802-22 Télécommunications et échange
d’information entre systèmes — Réseaux
locaux et métropolitains — Exigences
spécifiques — Partie 22:
ISO/IEC/IEEE
88021AE:2013/FDA
md 1
Télécommunications et échange
locaux et métropolitains — Partie 1AE:
Sécurité du contrôle d’accès aux supports
(MAC) — Amendement 1: .
ISO/IEC/IEEE
88021AE:2013/FDA
md 2
Télécommunications et échange
locaux et métropolitains — Partie 1AE:
Sécurité du contrôle d’accès aux supports
(MAC) — Amendement 2: .
38500
Gouvernance des technologies de
l’information pour l’entreprise
NORMES PUBLIEES
Nouvelles Normes internationales publiées entre le 1er
septembre 2014 et le 30 septembre 2014.
anglais seulement
IIW
Institut international de la soudure
ISO/TR
18786:2014
*Hygiène et sécurité en soudage - Lignes
directrices pour l’évaluation des risques
des activités de fabrication de soudage
ISO/IEC/IEEE Titre manque
FDIS 18880
TC 2
Fixations
27039
Techniques de sécurité — Sélection,
déploiement et opérations des systèmes
de détection d’intrusion
ISO
10664:2014
Empreinte à six lobes internes pour vis
ISO 18912:2014
*Fixations - Terminologie — Partie 2:
Vocabulaire et définitions pour les
revêtements
ISO/IEC FDIS *Technologie de l’information —
27040
Techniques de sécurité — Sécurité de
stockage
TC 4
Roulements
27043
Techniques de sécurité — Principes
d’investigation numérique et les processus
23001-7
Partie 7: Cryptage commun des fichiers au
ISO 492:2014 Roulements — Roulements radiaux —
Spécification géométrique des produits
(GPS) et valeurs de tolérance
ISO 32901:2014
Roulements — Billes — Partie 1: Billes de
roulement en acier
ISO 32902:2014
Roulements — Billes — Partie 2: Billes de
roulement en céramique
148
TC 8
ISO 186111:2014
*Navires et technologie marine — Agents
réducteurs NOx marins AUS 40 — Partie
1: Exigences de qualité
ISO 186112:2014
2: Méthodes d’essai
ISO 186113:2014
3: Manipulation, transport et stockage
IEC/PAS
*Alimentation des navires à quai — Partie
80005-3:2014 3:
TC 10
ISO 106281:2014
Schémas de procédé pour l’industrie
chimique et pétrochimique — Partie 1:
Spécification des schémas de procédé
TC 17
Acier
ISO 150071:2002
Véhicules routiers — Mesurage du
comportement visuel du conducteur en
relation avec les systèmes de commande
et d’information du transport — Partie 1:
Définitions et paramètres
TC 23
forestiers
ISO 1178312:2014
forestiers — Réseaux de commande et de
communication de données en série —
Partie 12: Services de diagnostic
TC 28
ISO/TR 19686- *Produits pétroliers — Équivalence des
1:2014
méthodes d’essai déterminant la même
propriété — Partie 1: Distillation
atmosphérique de produits pétroliers
TC 29
Petit outillage
ISO 6103:2014 Produits abrasifs agglomérés — Balourds
admissibles des meules en état de
livraison — Contrôle statique
ISO 630-5:2014*Aciers de construction — Partie 5:
Conditions techniques de livraison pour
aciers de construction à résistance
améliorée à la corrosion atmosphérique
TC 34
ISO 630-6:2014*Aciers de construction — Partie 6:
Conditions techniques de livraison pour
aciers de construction améliorés
sismiques pour bâtiment
ISO 122282:2014
Détermination de la teneur en stérols
individuels et totaux — Méthode par
chromatographie en phase gazeuse —
Partie 2: Huile d’olive et huile de grignons
d’olive
ISO 68318:2014
*Aciers pour traitement thermique, aciers
alliés et aciers pour décolletage — Partie
18: Produits en aciers transformés à froid
ISO/TS
17383:2014
ISO 161431:2014
*Aciers inoxydables pour usage général —
Partie 1: Produits plats en acier résistant à
la corrosion
Détermination de la composition en
triglycérides des corps gras —
Détermination par chromatographie en
phase gazeuse sur colonne capillaire
TC 35
Peintures et vernis
ISO 4995:2014 *Tôles en acier de construction laminées à
chaud
TC 22
Véhicules routiers
ISO 185411:2014
*Véhicules routiers — Normalisation de
l’accès aux informations relatives à la
réparation et à la maintenance pour
l’automobile (RMI) — Partie 1:
Informations générales et définitions de
cas d’usage
ISO 185412:2014
ISO 185413:2014
l’automobile (RMI) — Partie 2: Exigences
techniques
l’automobile (RMI) — Partie 3: Exigences
d’interface fonctionnelles pour l’utilisateur
ISO 2813:2014 Peintures et vernis — Détermination de
l’indice de brillance à 20 degrés, 60
degrés et 85 degrés
ISO
13803:2014
Peintures et vernis — Détermination du
voile sur des feuils de peinture à 20
degrés
TC 39
Machines-outils
ISO 149551:2014
Machines-outils — Évaluation
environnementale des machines-outils —
Partie 1: Méthode de conception pour
l’efficacité énergétique des machinesoutils
ISO 23010:2011/Amd
1:2014
Code d’essai des machines-outils —
Partie 10: Détermination des
performances de mesure des systèmes de
palpage des machines-outils à commande
numérique — Amendement 1:
Performances de mesure avec palpeurs
de scanning
149
ISO 190661:2014
Plastiques — Matériaux plastique
(méthacrylate de méthyle)-acrylonitrilebutadiène-styrène (MABS) pour moulage
et extrusion — Partie 1: Système de
désignation et base de spécifications
Soudage et techniques connexes
TC 71
ISO
25980:2014
Hygiène et sécurité en soudage et
techniques connexes — Rideaux, lanières
et écrans transparents pour les procédés
de soudage à l’arc
précontraint
ISO
19338:2014
*Exigences de performance et
d’évaluation pour la conception des
normes relatives au béton structurel
TC 45
d’élastomères
TC 79
Métaux légers et leurs alliages
ISO 63612:2014
*Aluminium et alliages d’aluminium
corroyés — Tôles, bandes et tôles
épaisses — Partie 2: Propriétés
mécaniques
ISO 63613:2014
épaisses — Partie 3: Bandes: Tolérances
sur forme et dimensions
ISO 63614:2014
épaisses — Partie 4: Tôles et tôles
épaisses: Tolérances sur forme et
dimensions
ISO 63622:2014
corroyés — Barres, tubes et profilés filés
— Partie 2: Caractéristiques mécaniques
ISO 63627:2014
corroyés — Barres, tubes et profilés filés
— Partie 7: Composition chimique
TC 85
ISO
16641:2014
Mesurage de la radioactivité dans
l’environnement — Air — Radon 220:
Méthode de mesure intégrée pour la
détermination de l’activité volumique
moyenne avec des détecteurs passifs
solides de traces nucléaires
TC 106
ISO 166352:2014
Médecine bucco-dentaire — Instruments
de digue dentaire en caoutchouc — Partie
2: Pinces porte-crampons
TC 121
respiratoire
TC 42
Photographie
ISO
18938:2014
*Matériaux pour l’image — Disques
optiques — Précautions et manipulation
pour stockage étendu
TC 44
ISO 6806:2014 Tuyaux et flexibles en caoutchouc pour
brûleurs — Spécifications
ISO
17324:2014
*Tuyaux en caoutchouc pour
turbocompresseurs automobiles —
Spécifications
ISO
27126:2014
*Tuyaux et flexibles multicouches (non
vulcanisés) thermoplastiques pour le
transfert des hydrocarbures, des solvants
et des produits chimiques —
Spécifications
ISO 4097:2014 *Caoutchouc éthylène-propylène-diène
(EPDM) — Méthode d’évaluation
ISO 4659:2014 *Caoutchouc butadiène-styrène
(mélanges-maîtres avec du noir de
carbone ou avec du noir de carbone et de
l’huile) — Méthode d’évaluation
ISO 7663:2014 *Caoutchoucs isobutène-isoprène
halogénés (BIIR et CIIR) — Méthodes
d’évaluation
ISO
Matériaux polymères alvéolaires souples
2440:1997/Amdet rigides — Essais de vieillissement
2:2014
accéléré — Amendement 2
TC 61
Plastiques
ISO
17541:2014
*Plastiques — Évaluation quantitative des
dommages induits par rayure et visibilité
des rayures
ISO
15512:2014
Plastiques — Dosage de l’eau
ISO 220076:2014
Plastiques — Détermination de la
conductivité thermique et de la diffusivité
thermique — Partie 6: Méthode
comparative pour faibles conductivités
thermiques utilisant une technique de
modulation de la température
ISO
12000:2014
Plastiques/caoutchouc — Dispersions de
polymères et latex de caoutchouc (naturel
et synthétique) — Définitions et revue des
méthodes d’essai
ISO 5359:2014 Matériel d’anesthésie et de réanimation
respiratoire — Flexibles de raccordement
à basse pression pour utilisation avec les
gaz médicaux
TC 127
ISO
*Engins de terrassement et chariots
150
17253:2014
élévateurs tout terrain à portée variable —
Exigences de conception pour engins
prévus pour circuler sur route
TC 131
pneumatiques
ISO
16908:2014
Méthodes d’essai des éléments filtrants
hydrauliques — Conditionnement
thermique et simulation de démarrage à
froid
TC 147
Qualité de l’eau
ISO
16308:2014
Qualité de l’eau — Détermination du
glyphosate et de l’AMPA — Méthode par
chromatographie en phase liquide à haute
performance (CLHP) avec détection par
spectrométrie de masse en tandem
TC 171
Applications en gestion des documents
ISO/TR
17797:2014
*Archivage électronique — Sélection d’un
support de stockage numérique pour une
préservation à long terme
ISO/TR
18160:2014
*Gestion des documents — Conservation
numérique — Enregistrement analogique
au microforme sur gélatine-argent
TC 172
Optique et photonique
ISO 141351:2014
*Optique et photonique — Spécifications
pour lunettes de pointage — Partie 1:
Instruments pour usage général
ISO 141352:2014
*Optique et photonique — Spécifications
pour lunettes de pointage — Partie 2:
Instruments haute performance
ISO 93452:2014
*Microscopes — Tirages mécaniques en
fonction des plans mécaniques de
référence — Partie 2: Systèmes d’optique
corrigés à l’infini
ISO 93081:2014
Qualité de l’eau — Dénombrement des
Escherichia coli et des bactéries
coliformes — Partie 1: Méthode par
filtration sur membrane pour les eaux à
faible teneur en bactéries
TC 150
Implants chirurgicaux
ISO 85981:2014
ISO 128912:2014
*Retrait et analyse des implants
chirurgicaux — Partie 2: Analyse des
implants chirurgicaux métalliques retirés
Optique et instruments d’optique —
Frontofocomètres — Partie 1: Instruments
pour cas généraux
ISO
11978:2014
ISO 58324:2014
Implants chirurgicaux — Produits à base
de métaux — Partie 4: Alliage à couler à
base de cobalt, de chrome et de
molybdène
Optique ophtalmique — Lentilles de
contact et produits d’entretien des lentilles
de contact — Étiquetage
ISO 119796:2014
ISO 583211:2014
Implants chirurgicaux — Produits à base
de métaux — Partie 11: Alliage à forger à
base de titane, d’aluminium 6 et de
niobium 7
Implants ophtalmiques — Lentilles
intraoculaires — Partie 6: Durée de
conservation et stabilité pendant le
transport
ISO
14730:2014
TC 160
Verre dans la construction
ISO 114853:2014
Verre dans la construction — Verre
bombé — Partie 3: Exigences pour le
verre de sécurité bombé trempé et bombé
feuilleté
Optique ophtalmique — Produits
d’entretien des lentilles de contact —
Essais de l’efficacité de conservation
antimicrobienne et lignes directrices pour
la détermination de la durée d’utilisation
après première ouverture
ISO
18259:2014
TC 164
ISO 65061:2014
Matériaux métalliques — Essai de dureté
Brinell — Partie 1: Méthode d’essai
*Optique ophtalmique — Produits
d’entretien de lentilles de contact —
Méthode d’évaluation des produits
d’entretien des lentilles de contact avec
les lentilles de contact dans leur étui, en
présence de contamination par des
bactéries et champignons
ISO 65062:2014
Brinell — Partie 2: Vérification et
étalonnage des machines d’essai
ISO/TS
19979:2014
ISO 65063:2014
Brinell — Partie 3: Étalonnage des blocs
de référence
*Optique ophtalmique — Lentilles de
contact — Entretien de l’hygiène des
lentilles de contact d’essai à usage
multipatient
IEC 80601-258:2014
ISO 65064:2014
Brinell — Partie 4: Tableau des valeurs de
dureté
*Appareils électromédicaux — Partie 2-58:
Exigences particulières pour la sécurité de
base et les performances essentielles des
dispositifs de retrait du cristallin et des
dispositifs de vitrectomie pour la chirurgie
ophtalmique
151
TC 173
Appareils et accessoires fonctionnels
pour les personnes handicapées
ISO 717622:2014
Fauteuils roulants — Partie 22:
Procédures de réglage
TC 189
Carreaux en céramique
ISO 105451:2014
Carreaux et dalles céramiques — Partie 1:
Échantillonnage et conditions de réception
TC 190
Qualité du sol
ISO 143881:2014
Qualité du sol — Méthode de comptage
acide-base pour les sols sulfatés acides
— Partie 1: Introduction et définitions,
symboles et acronymes, échantillonnage
et préparation des échantillons
ISO/TS
14071:2014
Management environnemental — Analyse
du cycle de vie — Processus de revue
critique et compétences des vérificateurs:
Exigences et lignes directrices
supplémentaires à l’ISO 14044:2006
TC 212
Laboratoires d’analyses de biologie
médicale et systèmes de diagnostic in
vitro
ISO
15189:2012
*Laboratoires de biologie médicale —
Exigences concernant la qualité et la
compétence
TC 213
Spécifications et vérification
dimensionnelles et géométriques des
produits
ISO 143882:2014
Qualité du sol — Méthode de comptage
acide-base pour les sols sulfatés acides
— Partie 2: Méthode de sulfato réduction
au chrome
ISO 1661071:2014
Spécification géométrique des produits
(GPS) — Filtrage — Partie 71: Filtres
surfaciques robustes: Filtres de régression
gaussiens
TC 193
Gaz naturel
TC 215
ISO/TR
22302:2014
Gaz naturel — Calcul de l’indice de
méthane
ISO 170904:2014
ISO
16960:2014
Gaz naturel — Détermination des
composés soufrés — Détermination de la
teneur totale en soufre par
microcoulométrie oxydante
*Informatique de la santé — Infrastructure
clé publique — Partie 4: Signatures
numériques pour les documents des soins
médicaux
ISO 226001:2014
Informatique de santé — Gestion de
privilèges et contrôle d’accès — Partie 1:
Vue d’ensemble et gestion des politiques
ISO 226002:2014
Modèles formels
ISO 226003:2014
Mises en oeuvre
TC 217
Cosmétiques
ISO
17516:2014
Cosmétiques — Microbiologie — Limites
microbiologiques
TC 244
Fours industriels et équipements
associés
ISO 135772:2014
*Fours industriels et équipements
associés — Sécurité — Partie 2:
Équipement de combustion et de
manutention des combustibles
JTC 1
TC 194
ISO 109933:2014
TC 195
ISO 186502:2014
Évaluation biologique et clinique des
Évaluation biologique des dispositifs
médicaux — Partie 3: Essais concernant
la génotoxicité, la cancérogénicité et la
toxicité sur la reproduction
Machines et matériels pour la
construction des bâtiments
Machines et matériels pour la construction
des bâtiments — Malaxeurs de béton —
Partie 2: Mode opératoire pour la
détermination de l’efficacité de malaxage
TC 201
Analyse chimique des surfaces
ISO
17560:2014
*Analyse chimique des surfaces —
Spectrométrie de masse des ions
secondaires — Dosage du bore dans le
silicium par profilage d’épaisseur
TC 204
ISO/TS 21219- *Systèmes intelligents de transport —
2:2014
Informations sur le trafic et le tourisme via
le groupe expert du protocole de
transport, génération 2 (TPEG2) — Partie
2: Règles de modelage UML
TC 207
Management environnemental
ISO/IEC 8824- *Technologies de l’information — Notation
1:2008/Cor
de syntaxe abstraite numéro un (ASN.1):
2:2014
Spécification de la notation de base —
Partie 1: — Rectificatif technique 2
4:2008/Cor
1:2014
Paramétrage des spécifications de la
notation de syntaxe abstraite numéro un
152
— Partie 4: — Rectificatif technique 1
ISO 1478:1999 (reconfirmée)
ISO/IEC 8825- *Technologies de l’information — Règles
1:2008/Cor
de codage ASN.1: Spécification des
2:2014
règles de codage de base (BER), des
règles de codage canoniques (CER) et
des règles de codage distinctives (DER)
4:2008/Cor
de codage ASN.1: Règles de codage XML
2:2014
(XER) — Partie 4: — Rectificatif technique
2
5:2008/Cor
de codage ASN.1: Mappage en ASN.1
2:2014
des définitions de schéma XML du W3C
ISO
10666:1999
(reconfirmée)
ISO
15480:1999
(reconfirmée)
ISO
15481:1999
(reconfirmée)
ISO
15482:1999
(reconfirmée)
ISO
15483:1999
(reconfirmée)
ISO 4042:1999
TC 5
Tuyauteries en métaux ferreux et
raccords métalliques
ISO/IEC 17811-*Technologies de l’information —
3:2014
Commande et gestion de périphériques —
Partie 3: Spécification du protocole de
livraison fiable de messages
ISO 70052:1988
(reconfirmée)
ISO/IEC 1539- *Technologies de l’information —
1:2010/Cor
Langages de programmation — Fortran —
3:2014
Partie 1: Langage de base — Rectificatif
technique 3
ISO 70053:1988
(reconfirmée)
TC 6
ISO/IEC
18031:2011/Co Techniques de sécurité — Génération de
r 1:2014
bits aléatoires — Rectificatif technique 1
ISO/IEC
19772:2009/Co Techniques de sécurité — Chiffrage
r 1:2014
authentifié — Rectificatif technique 1
ISO/IEC
27001:2013/Co Techniques de sécurité — Systèmes de
r 1:2014
management de la sécurité de
l’information — Exigences — Rectificatif
technique 1
ISO/IEC
27002:2013/Co Techniques de sécurité — Code de bonne
r 1:2014
pratique pour le management de la
sécurité de l’information — Rectificatif
technique 1
7:2014
Identification par radiofréquence (RFID)
pour la gestion d’objets — Partie 7:
Paramètres de communications actives
d’une interface radio à 433 MHz
NORMES CONFIRMEES
TC 8
ISO
15516:2006
(reconfirmée)
TC 20
ISO 68591:1982
(reconfirmée)
ISO 86681:1986
(reconfirmée)
ISO 86683:1994
(reconfirmée)
ISO 58431:1985
(reconfirmée)
ISO 58438:1988
(reconfirmée)
TC 22
Véhicules routiers
ans:
TC 2
ISO 87913:2005
Fixations
ISO 123532:2003
(reconfirmée)
ISO 132161:1999
(reconfirmée)
153
ISO 132162:2004
(reconfirmée)
TC 23
forestiers
ISO 78912:2000
ISO 82621:2005
(reconfirmée)
ISO 115201:1997
(reconfirmée)
ISO 82622:2005
(reconfirmée)
ISO
17080:2005
(reconfirmée)
ISO 82623:2005
(reconfirmée)
TC 24
Caractérisation des particules, y
compris le tamisage
ISO 133171:2001
ISO 118661:2005
(reconfirmée)
ISO 133181:2001
ISO 118662:2005
(reconfirmée)
ISO
15900:2009
ISO
13875:2005
(reconfirmée)
ISO 159013:2007
ISO 144611:2005
(reconfirmée)
ISO 215012:2007
ISO 144612:2005
(reconfirmée)
ISO 215013:2007
ISO
14674:2005
(reconfirmée)
ISO
15322:2005
(reconfirmée)
TC 28
TC 29
ISO 229351:2009
Petit outillage
ISO
13942:2000
ISO 229352:2009
(reconfirmée)
ISO 229353:2009
ISO
26323:2009
ISO 11742:1996
TC 30
ISO/TS
19036:2006
Mesure de débit des fluides dans les
conduites fermées
ISO 59832:2009
ISO
13359:1998
(reconfirmée)
TC 34
TC 35
Peintures et vernis
ISO
11998:2006
ISO 659:2009
ISO 37273:2003
(reconfirmée)
(reconfirmée)
ISO 85013:2006
(reconfirmée)
ISO 111269:1999
(reconfirmée)
ISO 5764:2009
154
TC 36
Cinématographie
ISO 1658:2009
TC 38
ISO 20061:2009
Textiles
ISO 105F10:1989
ISO 20062:2009
(reconfirmée)
ISO 7768:2009
ISO 2930:2009
ISO 7769:2009
ISO 7770:2009
TC 39
ISO 6209:2009
Machines-outils
ISO 62251:2006
ISO 230-3:2007
TC 44
(reconfirmée)
ISO 5173:2009
ISO
14327:2004
ISO
11235:1999
ISO/TS
16176:2011
ISO/TR 176712:2002
ISO 945517:2002
TC 45
d’élastomères
ISO 1402:2009
(reconfirmée)
ISO 202991:2006
(reconfirmée)
ISO
21171:2006
(reconfirmée)
ISO
21869:2006
(reconfirmée)
ISO
22768:2006
(reconfirmée)
ISO 1436:2009
ISO 3949:2009
ISO 4023:2009
ISO 4079:2009
ISO 4080:2009
ISO
25518:2009
TC 46
ISO 8459:2009
ISO 8031:2009
ISO
28500:2009
TC 47
ISO
11014:2009
TC 58
155
Information et documentation
Chimie
Bouteilles à gaz
13203:2005
ISO
25760:2009
TC 106
TC 59
ISO 4049:2009
ISO
13640:1999
(reconfirmée)
TC 61
Plastiques
ISO/TS 14569- (reconfirmée)
2:2001
ISO
10093:1998
TC 108
ISO
19499:2007
ISO
16770:2004
ISO 26311:1997
TC 69
Application des méthodes statistiques
ISO 57255:1998
(reconfirmée)
ISO 118434:2003
(reconfirmée)
TC 71
précontraint
TC 110
ISO 19205:2004
(reconfirmée)
TC 113
(reconfirmée)
ISO 26311:1997/Amd
1:2010
Hydrométrie
TC 117
ISO 273271:2009
TC 118
TC 76
Vibrations et chocs mécaniques, et leur
surveillance
pharmaceutique
Compresseurs, machines portatives
pneumatiques, machines et
équipements pneumatiques
TC 119
ISO 85363:2009
Ventilateurs
Métallurgie des poudres
ISO 2740:2009
TC 86
Froid et climatisation
ISO 3327:2009
ISO/R
916:1968
(reconfirmée)
TC 122
Emballages
ISO 65901:1983
(reconfirmée)
TC 94
ISO 65911:1984
(reconfirmée)
ISO 65912:1985
(reconfirmée)
ISO 65991:1983
(reconfirmée)
ISO 139822:2004
ISO
16602:2007
TC 98
Bases du calcul des constructions
ISO 4354:2009
TC 100
Chaînes et pignons dentés pour
transmission d’énergie et convoyeurs
ISO 79651:1984
(reconfirmée)
ISO
(reconfirmée)
ISO 7965-
(reconfirmée)
156
2:1993
11474:1998
ISO 83671:1993
(reconfirmée)
ISO 117821:1998
(reconfirmée)
ISO 83672:1993
(reconfirmée)
ISO 117822:1998
(reconfirmée)
ISO
15867:2003
(reconfirmée)
ISO 118441:2006
(reconfirmée)
TC 126
Tabac et produits du tabac
(reconfirmée)
ISO
18144:2003
(reconfirmée)
ISO 118442:2005
(reconfirmée)
ISO
18145:2003
(reconfirmée)
ISO
16151:2005
(reconfirmée)
ISO
21147:2003
(reconfirmée)
ISO 167841:2006
(reconfirmée)
TC 138
des fluides
ISO 167842:2006
ISO
17475:2005
(reconfirmée)
TC 163
Performance thermique et utilisation de
l’énergie en environnement bâti
ISO 125672:2005
(reconfirmée)
TC 165
Structures en bois
ISO
16670:2003
(reconfirmée)
TC 171
Applications en gestion des documents
ISO 11672:2006
(reconfirmée)
ISO 186721:2009
TC 146
Qualité de l’air
ISO
15767:2009
ISO
16622:2002
(reconfirmée)
ISO
11506:2009
ISO 1600014:2009
TC 172
TC 147
Qualité de l’eau
ISO/TS
20612:2007
(reconfirmée)
ISO 101108:2010
ISO
22478:2006
(reconfirmée)
ISO
10935:2009
(reconfirmée)
ISO 118841:2006
(reconfirmée)
ISO
23631:2006
(reconfirmée)
ISO 118842:2007
(reconfirmée)
ISO
14442:2006
TC 174
TC 153
Robinetterie
ISO
11489:1995
(reconfirmée)
TC 156
TC 190
Qualité du sol
ISO
10062:2006
(reconfirmée)
ISO
11272:1998
(reconfirmée)
ISO
11306:1998
(reconfirmée)
ISO
11274:1998
(reconfirmée)
ISO
(reconfirmée)
ISO
(reconfirmée)
157
11508:1998
TC 192
ISO 4952:2006 (remplacée par ISO 630-5:2014)
Turbines à gaz
ISO
21789:2009
TC 201
ISO
23812:2009
ISO
24314:2006
(remplacée par ISO 630-6:2014)
TC 20
ISO/PAS
21100:2011
(remplacée par ISO 21100:2014)
TC 34
ISO
12228:1999
(remplacée par ISO 12228-1:2014, ISO
12228-2:2014)
TC 206
Céramiques techniques
ISO
15732:2003
(reconfirmée)
TC 61
Plastiques
ISO
18452:2005
(reconfirmée)
ISO 103661:2002
ISO
18755:2005
(reconfirmée)
TC 172
ISO
18756:2003
(reconfirmée)
ISO
20502:2005
(reconfirmée)
ISO/TS 22600- (remplacée par ISO 22600-1:2014)
1:2006
ISO
20505:2005
(reconfirmée)
2:2006
ISO
20508:2003
(reconfirmée)
3:2009
ISO
24369:2005
(reconfirmée)
ISO
24370:2005
(reconfirmée)
TC 215
ISO
26423:2009
JTC 1
ISO/IEC
11801:2002
ISO/IEC
19793:2008
ISO/IEC 197963:2009
NORMES ANNULEES
TC 10
ISO
10628:1997
(remplacée par ISO 10628-1:2014, ISO
10628-2:2012)
TC 17
Acier
158
à 16:00, le vendredi de 9:00 à 13:00.
van 9:00 tot 13:00.
Période du 1er octobre 2014 au 31 octobre 2014.
INTERNATIONAL
ORGANISATION FOR
STANDARDIZATION
TC 4
Roulements
ISO/DIS
3245.2
Roulements — Douilles à aiguilles sans
bague intérieure — Spécifications
géométrique des produits (GPS),
dimensions d’encombrement et
tolérances
TC 6
ISO/DIS 302
*Pâtes — Détermination de l’indice
Kappa
ISO/DIS
11476
*Papier et carton — Détermination du
degré de blanc CIE C/2° (éclairage
interieur)
TC 8
ISO/DIS
29404
*Navires et technologie maritime —
Exigences spécifiques pour les
composants de fermes éoliennes
offshore — Flux d’informations dans la
chaîne d’approvisionnement
ISO/DIS
15016.2
Navires et technologie maritime —
Lignes directrices pour l’évaluation des
performances de vitesse et de puissance
par analyse des données d’essais de
vitesse
TC 10
ISO/DIS
13715
Arêtes de forme non définie — Indication
et cotation
TC 17
Acier
Nieuwe publicaties
Frans.
ISO/DIS 5003 *Rails Vignole de masse supérieure ou
égale à 43 kg/m
TC 20
ISO/DIS 8575 *Série aérospatiale — Systèmes de
159
fluides — Tubes pour systèmes
hydrauliques
d’utilisation
16852:2008/Cor 1:2008, ISO
16852:2008/Cor 2:2009)
ISO/DIS
20105
Space data and information transfer
systems -- Operation of CFDP over
encapsulation service
ISO/DIS
20106
systems -- Mission operations common
object model
ISO/DIS
20107
systems -- Spacecraft onboard interface
services -- Device virtualization service
ISO/DIS
20205
systems -- Spacecraft Onboard Interface
Systems -- Low Data-Rate Wireless
Communications for Spacecraft
Monitoring and Control
ISO/DIS
20206
systems -- IP over CCSDS space links
ISO/DIS
20207
systems -- CCSDS Space Link Protocols
over ETSI DVB-S2 Standard
ISO/DIS
20208
systems -- Delta-DOR Raw Data
Exchange Format
ISO/DIS
20210
systems -- Mission Operations Message
Abstraction Layer - JAVA API
ISO/DIS
20211
systems -- Spacecraft Onboard Interface
Services -- Device Access Service
TC 22
Véhicules routiers
ISO/DIS
10924-5
*Véhicules routiers — Coupe-circuits —
Partie 5: Coupe circuit moyen à pattes
avec une tension nominale de 9 450 V
ISO/DIS
15082
*Véhicules routiers — Essais pour les
vitrages de sécurité rigides en matières
plastiques
TC 23
forestiers
ISO/DIS 7893
*Tracteurs agricoles — Méthodes d’essai
— Partie 3: Diamètres de braquage et de
dégagement
ISO/DIS 5131 *Tracteurs agricoles et forestiers —
Mesurage du bruit au poste de conduite
de l’opérateur — Méthode de contrôle
ISO/DIS
4254-7
*Matériel agricole — Sécurité — Partie 7:
Moissonneuses-batteuses, récolteuseshacheuses-chargeuses de fourrage,
récolteuses de coton et récolteuses de
cannes à sucre
TC 24
Caractérisation des particules, y
compris le tamisage
ISO/DIS
3310-1
*Tamis de contrôle — Exigences
techniques et vérifications — Partie 1:
Tamis de contrôle en tissus métalliques
ISO/DIS
20213
services -- Message transfer service
ISO/DIS
20214
systems -- Security architecture for
space data systems
ISO/DIS 9044 *Tissus métalliques industriels —
Exigences techniques et vérifications
ISO/DIS
20215
systems -- CCSDS cryptographic
algorithms
TC 27
ISO/DIS
20216
Combustibles minéraux solides
ISO/DIS 5074 *Houille — Détermination de l’indice de
broyabilité Hardgrove
services -- Device data pooling service
ISO/DIS
20217
services -- File and packet store services
TC 21
Équipement de protection et de lutte
contre l’incendie
ISO/DIS
16852
*Arrête-flammes — Exigences de
performance, méthodes d’essai et limites
TC 28
ISO/DIS
4263-3.2
*Pétrole et produits connexes —
Détermination du comportement au
vieillissement des fluides et huiles
inhibés au moyen de l’essai TOST —
Partie 3: Méthode anhydre pour les
fluides hydrauliques synthétiques
TC 34
160
ISO/DIS
16634-2
*Produits alimentaires — Détermination
de la teneur en azote total par
combustion selon le principe Dumas et
calcul de la teneur en protéines brutes —
Partie 2: Céréales, légumineuses et
produits céréaliers de mouture
ISO/DIS
27105
*Lait et fromages — Détermination de la
teneur en lysozyme de blanc d’oeuf par
chromatographie liquide haute
performance
ISO/DIS
11290-1
*Microbiologie de la chaîne alimentaire
— Méthode horizontale pour la
recherche et le dénombrement de
Listeria monocytogenes et Listeria spp.
— Partie 1: Méthode de recherche
11290-1:1996/Amd 1:2004)
ISO/DIS
11290-2
— Méthode horizontale pour la
recherche et le dénombrement de
Listeria monocytogenes et de Listeria
spp. — Partie 2: Méthode de
dénombrement
11290-2:1998/Amd 1:2004)
ISO/DIS
18465
— Analyse quantitative d’une toxine
émétique (Céreulide) par LC-MS/MS
ISO/DIS
17780
*Corps gras d’origines animale et
végétale — Détermination des
hydrocarbures aliphatiques en corps
gras d’origines végétale
TC 35
Peintures et vernis
ISO/DIS
2811-1
la masse volumique — Partie 1: Méthode
pycnométrique
ISO/DIS
20567-1
la résistance des revêtements aux
impacts de cailloux — Partie 1: Essais
de chocs multiples
ISO/DIS
20567-2
la résistance des revêtements aux
impacts de cailloux — Partie 2: Essais
de chocs simple par corps percutant
guidé
TC 39
Machines-outils
ISO/DIS
19085-1
*Machines à bois — Sécurité — Partie 1:
Exigences communes
ISO/DIS
19085-2
*Machines à bois — Sécurité — Partie 2:
Scies circulaires à panneaux
horizontales à presseur
TC 43
Acoustique
ISO/DIS 3893
*Acoustique — Zéro de référence pour
l’étalonnage d’équipements
audiométriques — Partie 3: Niveaux de
référence équivalents de force liminaire
pour les vibrateurs à sons purs et les
ossivibrateurs
ISO/DIS 3623
*Mesurage du bruit émis par les
véhicules routiers en accélération —
Méthode d’expertise — Partie 3: Essais
à l’intérieur de catégories M et N
TC 44
ISO/DIS
9692-3
*Soudage et techniques connexes —
Recommandations pour la préparation
des joints — Partie 3: Soudage MIG et
TIG de l’aluminium et de ses alliages
TC 58
Bouteilles à gaz
ISO/DIS
15453
*Bouteilles à gaz — Bouteilles à gaz en
acier et en alliages d’aluminium, sans
soudure — Évaluation des bouteilles à
gaz existantes et considérations relatives
à leur utilisation en toute sécurité dans
d’autres ressorts
TC 59
ISO/DIS
16757-2
*Structures de données pour catalogues
électroniques de produits pour les
services du bâtiment — Partie 2:
Géométrie
TC 67
ISO/DIS
17348
*Plates-formes en mer pour les
industries du pétrole et du gaz naturel —
Lignes directrices pour le choix de
matériaux dans un environnement à
haute teneur en CO2 pour tubes de
cuvelage et de production et
équipements de fond
TC 68
Services financiers
ISO/DIS
10962.2
*Valeurs mobilières et autres instruments
financiers concernés — Classification
des instruments financiers (code CFI)
TC 76
161
pharmaceutique
TC 117
ISO/DIS
11040-1
*Seringues préremplies — Partie 1:
Tubes en verre pour cartouches
dentaires d’anesthésie locale
TC 85
ISO/DIS
12749-4
*Energie nucleaire, technologies
nucleaires, et pmtection radiologique —
Vocabulaire — Partie 4: Dosimetrie pour
processue de radiation
ISO/DIS
16639
*Surveillance de l’activité volumique des
substances radioactives dans l’air des
lieux de travail des installations
nucléaires
TC 92
Sécurité au feu
ISO/DIS
16730-1
*Ingénierie de la sécurité incendie —
Procédures et exigences pour la
vérification et la validation des méthodes
de calcul — Partie 1: Généralités
Ventilateurs
ISO/DIS 5801 *Ventilateurs — Essais aérauliques sur
circuits normalisés
5801:2007/Cor 1:2008)
TC 126
TC 94
ISO/DIS
20349-1
*Équipement de protection individuelle —
Chaussures de proctection contre les
risques dans les fonderies et lors
d’opérations de soudage — Partie 1:
Exigences et méthode d’essai pour la
protection contre les risques dans les
fonderies
ISO/DIS
20349-2
implants dentaires endosseux
*Équipement de protection individuelle —
Chaussures de protection contre les
risques dans les fonderies et lors
d’opérations de soudage — Partie 2:
Exigences et méthodes d’essai pour la
protection contre les risques lors
d’opérations de soudage et les
techniques connexes
ISO/DIS 6565 *Tabac et produits du tabac —
Résistance au tirage des cigarettes et
perte de charge des bâtonnets-filtres —
Conditions normalisées et mesurage
TC 127
ISO
*Engins de terrassement — Étiquetage
9244:2008/DA de sécurité de la machine — Principes
md 1
généraux — Amendement 1
TC 131
pneumatiques
ISO/DIS
12829
*Filtres hydrauliques vissés à durée de
vie finie — Méthode de vérification de la
durée de vie nominale en fatique et de la
pression statique d’éclatement nominal
de l’enveloppe sous pression
ISO/DIS
21018-4
*Transmissions hydrauliques —
Surveillance du niveau de pollution
particulaire des fluides — Partie 4:
Technique d’absorption de lumière
TC 133
Systèmes de tailles des vêtements désignation des tailles, méthodes de
mesure des tailles et essayage virtuel
ISO/DIS
18163
*Habillement — Essayage virtuel —
Vocabulaire et terminologie utilisés pour
les vêtements virtuels
TC 136
Ameublement
ISO/DIS 7170 *Ameublement — Éléments de
rangement — Détermination de la
résistance et de la durabilité
ISO 12312*Protection des yeux et du visage —
1:2013/DAmd Lunettes de soleil et articles de lunetterie
1
associés — Partie 1: Lunettes de soleil
pour usage général — Amendement 1
ISO/DIS 7171 *Ameublement — Éléments de
rangement — Détermination de la
stabilité
TC 106
ISO/DIS 7173 *Ameublement — Sièges — Méthodes
d’essais pout la détermination de la
ISO/DIS 3964 *Médecine bucco-dentaire —
Dimensions d’accouplement pour pièces
à main dentaires
ISO/DIS
14801
*Médecine bucco-dentaire — Implants —
Essai de fatigue dynamique pour
ISO/DIS
19682
162
*Ameublement — Tables — Méthodes
d’essai pour la détermination de la
stabilité, de la résistance et de la
TC 142
Séparateurs aérauliques
ISO/DIS
16890-1
*Filtres à air pour ventilation générale —
Partie 1: Spécifications techniques,
exigences et système de classification
du rendement fondé sur les particules en
suspension (PM)
11354-2
avancées et leurs applications —
Exigences relatives à l’établissement
d’un processus d’interopérabilité pour les
entreprises de fabrication — Partie 2:
Modèle de maturité pour l’évaluation de
l’interopérabilité d’entreprise
TC 188
Petits navires
TC 147
Qualité de l’eau
ISO/DIS
9094.3
ISO/DIS
7027-1
*Qualité de l’eau — Détermination de la
turbidité — Partie 1: Méthodes
quantitatives
*Petits navires — Protection contre
l’incendie
ISO/DIS
10087
*Petits navires — Identification du bateau
— Système de codage
ISO/DIS
11591
*Petits navires — Champ de vision
depuis le poste de pilotage
ISO/DIS
14895
*Petits navires — Réchauds de cuisine
et appareils de chauffage alimentés par
un combustible liquide
TC 190
Qualité du sol
ISO/DIS
15009
*Qualité du sol — Détermination par
chromatographie en phase gazeuse des
teneurs en hydrocarbures aromatiques
volatils, en naphtalène et en
hydrocarbures halogénés volatils —
Méthode par purge et piégeage avec
désorption thermique
TC 192
Turbines à gaz
ISO/DIS
19859.2
*Applications des turbines à gaz —
Exigences relatives à la production
d’energie
TC 194
Évaluation biologique et clinique des
ISO/DIS
10993-6
*Évaluation biologique des dispositifs
médicaux — Partie 6: Essais concernant
les effets locaux après implantation
TC 201
ISO/DIS
18554
*Analyse chimique des surfaces Spectroscopie d’électrons - Proceedures
pour l’identification, l’estimation et la
correction de la dégradation involontaire
par rayons X pendant une analyse de
matériau
ISO/DIS
17294-2
ISO/DIS
18635
*Qualité de l’eau — Application de la
spectrométrie de masse avec plasma à
couplage inductif (ICP-MS) — Partie 2:
Dosage des éléments sélectionnés y
compris les isotopes d’uranium
*Qualité de l’eau — Détermination des
alcanes polychlorés à chaîne courte
dans les sédiments et matières en
suspension (particules) — Méthode par
chromatographie en phase gazeusespectrométrie de masse (CG-SM) avec
ionisation chimique négative (ICN)
TC 149
Cycles
ISO/DIS
11243
*Cycles — Porte-bagages pour
bicyclettes — Exigences et méthodes
d’essai
TC 159
Ergonomie
ISO/DIS
7250-3
*Définitions des mesures de base du
corps humain pour la conception
technologique — Partie 3: Valeurs de
conception régionales et mondiales pour
utilisation dans les normes d’équipement
ISO
ISO/DIS
20685-2
*Méthodologies d’exploration
tridimensionnelles pour les bases de
données anthropométriques compatibles
au plan international — Partie 2:
Protocole d’évaluation de la forme
extérieure et de la répétabilité des
positions relatives de repères
TC 171
Applications en gestion des
documents
ISO/DIS
32000-2
*Gestion de documents — Format de
document portable — Partie 2: PDF 2.0
TC 204
TC 184
intégration
ISO/DIS
17515-1
ISO/DIS
*Technologies d’automatisation
Intelligent transport systems -Communications access for land mobiles
(CALM) - Evolved Universal Terrestrial
163
Radio Access Network (E-UTRAN) -Part 1: General usage
TC 209
ISO/DIS
14644-14
Evaluation de l’aptitude à l’emploi des
équipements par la détermination de la
concentration de particules en
suspension dans l’air
TC 210
ISO/DIS
18250-8
maliciously tainted and counterfeit
products
ISO/IEC DIS
40314
ISO/IEC/IEEE *Ingénierie du logiciel et des systèmes —
DIS 29119-5 Essais du logiciel — Partie 5: Essais
axés sur des mots-clés
ISO/IEC DIS
18328-2
Management de la qualité et aspects
généraux correspondants des
*Connecteurs pour systèmes de livraison
de réservoir pour des applications de
soins de santé — Partie 8: Solution
anticoagulante à base de citrate pour les
applications d’aphérèse
TC 215
ISO/DIS
14199
Health informatics -- Information models
-- Biomedical Research Integrated
Domain Group (BRIDG) Model
TC 220
Récipients cryogéniques
ISO/DIS
21013-3
*Récipients cryogéniques — Dispositifs
de sécurité pour le service cryogénique
— Partie 3: Détermination de la taille et
du volume
TC 224
Activités de service relatives aux
systèmes d’alimentation en eau
potable et aux systèmes
d’assainissement - Critères de qualité
du service et indicateurs de
performance
ISO/DIS
24521
*Activités relatives aux services de l’eau
potable et des eaux usées — Lignes
directrices pour la gestion sur site des
services d’eaux usées domestiques de
base
TC 249
Médecine traditionnelle chinoise
ISO/DIS
18664
Traditional Chinese Medicine -Determination of heavy metals in herbal
medicines used in Traditional Chinese
Medicine
TC 261
Fabrication additive
ISO/DIS
17296-1
*Fabrication additive — Principes
généraux — Partie 1: Terminologie
JTC 1
ISO/IEC DIS
20243
Open Trusted Technology Provider
Standard (O-TTPS) -- Mitigating
Information technology -- Mathematical
Markup Language (MathML) Version 3.0
2nd Edition
Information technology -- ICC-managed
devices -- Part 2: Physical characteristics
and test methods for cards with devices
ISO/IEC
14496Codage des objets audiovisuels — Partie
3:2009/DAmd 3: Codage audio — Amendement 5: .
5
ISO/IEC DIS
14496-11
Codage des objets audiovisuels — Partie
11: Description de scène et moteur
d’application
ISO/IEC DIS
14496-22
22: Format de police de caractères
ouvert
ISO/IEC 14496-22:2009/Amd 1:2010,
ISO/IEC 14496-22:2009/Cor 1:2010,
ISO/IEC 14496-22:2009/Amd 2:2012)
ISO/IEC DIS
14496-31
31:
ISO/IEC DIS
23001-10
Partie 10:
ISO/IEC DIS
23003-4
Technologies audio MPEG — Partie 4:
ISO/IEC
230082:2013/DAmd
4
Codage à haute efficacité et livraison des
medias dans des environnements
hétérogènes — Partie 2: Codage vidéo à
haute efficacité — Amendement 4
ISO/IEC DIS
23008-3
hétérogènes — Partie 3:
ISO/IEC DIS
23008-12
hétérogènes — Partie 12:
ISO/IEC
23009Diffusion en flux adaptatif dynamique sur
1:2014/DAmd HTTP (DASH) — Partie 1: Description de
164
2
la présentation et formats de remise des
médias — Amendement 2: .
ISO/IEC
248002:2011/DAmd
1
JPSearch — Partie 2: Enregistrement,
identification et gestion des schémas et
de l’ontologie — Amendement 1: .
ISO/IEC DIS
18000-63
ISO/IEC DIS
29794-1
ISO/IEC DIS
18384-1
ISO/IEC DIS
18384-2
ISO/IEC DIS
18384-3
JPC 2
Comité de projet mixte - Efficacité
énergétique et énergies renouvelables Terminologie commune
ISO/IEC FDIS *Efficacité energétique et sources
13273-1
d’énergie renouvelables — Terminologie
internationale commune — Partie 1:
Efficacité énergétique
ISO/IEC
24800JPSearch — Partie 3: Format
3:2010/DAmd d’interrogation — Amendement 1: .
1
ISO/IEC DIS
29170-2
ISO/IEC FDIS *Efficacité energétique et énergies
13273-2
renouvelables — Terminologie
internationale commune — Partie 2:
Sources d’énergie renouvelables
Information technology -- Advanced
image coding and evaluation -- Part 2:
Evaluation procedure for nearly lossless
coding
Identification par radiofréquence (RFID)
pour la gestion d’objets — Partie 63:
Paramètres de communications d’une
interface radio entre 860 MHz et 960
MHz, Type C
*Technologies de l’information — Qualité
d’échantillon biométrique — Partie 1:
Cadre
Information technology -- Reference
Architecture for Service Oriented
Architecture (SOA RA) -- Part 1:
Terminology and Concepts for SOA
TC 6
ISO/FDIS
12625-9
*Papier tissue et produits tissues — Partie
9: Détermination de la résistance à
l’éclatement, méthode à la balle
ISO/FDIS
12625-15
15: Détermination des propriétés optiques
— Mesurage du degré de blancheur et de
la couleur avec l’illuminant C/2° (lumière
du jour à l’intérieur)
ISO/FDIS
12625-16
16: Détermination des propriétés optiques
— Opacité sur fond papier — Méthode par
réflexion en lumière diffuse
TC 8
ISO/FDIS 9876 *Navires et technologie maritime —
Récepteurs marins de transmissions par
télécopie des cartes météorologiques
Information Technology - Reference
Architecture (SOA RA) -- Part 2:
Reference Architecture for SOA
Solutions
Distributed Application Platforms and
Services (DAPS) -- Reference
Architecture (SOA) -- Part 3: Service
Oriented Architecture Ontology
PROJETS FINALS
er
Période du 1 octobre 2014 au 31 octobre 2014.
IIW
Institut international de la soudure
ISO/FDIS
14373
*Soudage par résistance — Mode
opératoire pour le soudage par points des
aciers à bas carbone revêtus et non
revêtus
ISO/FDIS
22554
Indicateurs de vitesse d’arbre du
propulseur — Type électrique et type
électronique
ISO/FDIS
17941
*Navires et technologie maritime — Portes
étanches incombustibles à charnières
hydrauliques
TC 10
ISO/FDIS
14084-2
*Schémas de procédés pour centrales
électriques — Partie 2: Symboles
graphiques
TC 23
forestiers
ISO/FDIS
24253-1
*Matériel de protection des cultures —
Essais de dépôt de la pulvérisation sur les
grandes cultures — Partie 1: Mesurage
dans un plan horizontal
ISO/FDIS
*Matériel de protection des cultures —
165
24253-2
TC 34
Essais de dépôt de la pulvérisation sur les
grandes cultures — Partie 2: Mesurage
dans une culture
ISO
29842:2011/FD Plans de présentation en blocs incomplets
Amd 1
équilibrés — Amendement 1
TC 61
Plastiques
ISO 899*Plastiques — Détermination du
1:2003/FDAmd comportement au fluage — Partie 1:
1
Fluage en traction — Amendement 1
TC 72
Matériel pour l’industrie textile
ISO
*Café vert — Lignes directrices pour
8455:2011/FDA l’entreposage et le transport —
md 1
Amendement 1
ISO/FDIS
23771
*Matériel pour l’industrie textile — Guide
pour la réduction de l’émission sonore à la
conception des machines textiles
TC 35
Peintures et vernis
TC 76
ISO/FDIS
3233-3
*Peintures et vernis — Détermination du
pourcentage en volume de matière non
volatile — Partie 3: Détermination par
calcul à partir de la teneur en matière non
volatile déterminée conformément à l’ISO
3251, de la masse volumique du produit
de peinture et de la masse volumique du
solvant du produit de peinture
pharmaceutique
ISO/FDIS
11040-4
Cylindres en verre pour produits
injectables et seringues stérilisées prêtes
à l’emploi préremplissables
ISO/FDIS
11040-7
Systèmes d’emballage pour les seringues
prêtes à l’emploi préremplissables
TC 98
Bases du calcul des constructions
TC 42
Photographie
ISO/FDIS
15781
*Photographie — Caméras numériques —
Décalage dans le temps du mesurage de
la prise, décalage dans le temps de
l’ouverture de l’objectif, cadence de prise
et temps de démarrage
TC 44
ISO/FDIS
18278-1
*Soudage par résistance — Soudabilité —
Partie 1: Exigences générales pour
l’évaluation de la soudabilité pour le
soudage par résistance par points, à la
molette et par bossages des matériaux
métalliques
TC 45
ISO/FDIS 2394 *Principes généraux de la fiabilité des
constructions
TC 106
ISO/FDIS
24234.2
*Médecine bucco-dentaire — Amalgame
dentaire
24234:2004/Amd 1:2011)
ISO/FDIS
7494-2
*Médecine bucco-dentaire — Units
dentaires — Partie 2: Systèmes
d’alimentation en air et en eau,
d’aspiration et d’évacuation des eaux
usées
(Revision of ISO 11144:1995, ISO 74942:2003)
TC 107
Revêtements métalliques et autres
revêtements inorganiques
d’élastomères
ISO/FDIS 1823 *Flexibles en caoutchouc pour
chargement et déchargement des produits
pétroliers — Spécification
ISO
*Tuyaux et flexibles en caoutchouc, à
28017:2011/FD armature textile ou métallique, pour des
Amd 1
applications de dragage — Spécifications
— Amendement 1
TC 59
ISO/FDIS
12006-2
*Construction immobilière — Organisation
de l’information des travaux de
construction — Partie 2: Plan type pour la
classification
ISO/FDIS 4528 *Finitions en émail vitrifié — Guide pour le
choix des méthodes d’essai applicables
aux surfaces émaillées de pièces
TC 108
surveillance
ISO/FDIS
10816-21
*Vibrations mécaniques — Évaluation des
vibrations des machines par mesurages
sur les parties non tournantes — Partie
21: Turbines éoliennes à l’axe horizontal
avec multiplicateur
166
ISO 5349*Vibrations mécaniques — Mesurage et
2:2001/FDAmd évaluation de l’exposition des individus
1
aux vibrations transmises par la main —
Partie 2: Guide pratique pour le mesurage
sur le lieu de travail — Amendement 1
13845
d’étanchéité en élastomère pour les tubes
en plastiques — Méthode d’essai
d’étanchéité sous pression interne et avec
déviation angulaire
TC 119
Métallurgie des poudres
TC 147
Qualité de l’eau
ISO/FDIS
14317
*Matériaux métalliques frittés, à l’exclusion
des métaux-durs — Détermination de la
limite d’élasticité en compression
ISO/FDIS
17690
*Qualité de l’eau — Dosage des cyanures
libres disponibles (pH 6) par analyse avec
injection en flux (FIA), diffusion de gaz et
détection ampérométrique
TC 120
Cuir
ISO/FDIS
14931
*Cuirs — Guide pour la sélection des cuirs
pour vêtements (à l’exclusion des
fourrures)
ISO/FDIS 9697 *Qualité de l’eau — Mesurage de l’activité
bêta globale des eaux non salines —
Méthode par source concentrée
TC 121
respiratoire
ISO/FDIS
5356-1
*Matériel d’anesthésie et de réanimation
respiratoire — Raccords coniques —
Partie 1: Raccords mâles et femelles
ISO/FDIS
17244
*Qualité de l’eau - Détermination de la
toxicité d’échantillons aqueux sur le
développement embryo-larvaire d’huître
creuse (Crassostrea gigas) et moule
(Mytilus edulis et galloprovincialis)
TC 156
ISO/FDIS
18086
Détermination de la corrosion
occasionnée par les courants alternatifs —
Critères de protection
TC 131
pneumatiques
ISO/FDIS
18413
*Transmissions hydrauliques — Propreté
des pièces et composants — Documents
de contrôle et principes d’extraction et
d’analyse des polluants et d’expression
des résultats
TC 164
ISO/FDIS
6892-3
*Matériaux métalliques — Essai de
traction — Partie 3: Méthode d’essai à
basse température
TC 138
des fluides
TC 172
ISO/FDIS
9022-3
*Optique et photonique — Méthodes
d’essais d’environnement — Partie 3:
Contraintes mécaniques
ISO/FDIS
9022-6
Poussière
ISO/FDIS
9022-7
d’essais environnementales — Partie 7:
Résistance au ruissellement ou à la pluie
ISO/FDIS
9022-8
Haute pression, basse pression,
immersion
TC 190
Qualité du sol
ISO/FDIS
11074
*Qualité du sol — Vocabulaire
11074:2005/Cor 1:2006)
ISO/FDIS 3501 *Systèmes de canalisations en plastique
— Assemblages mécaniques entre
raccords et tubes sous pression —
Méthode d’essai de résistance à
l’arrachement sous une force longitudinale
constante
ISO/FDIS
6259-3
*Tubes en matières thermoplastiques —
Détermination des caractéristiques en
traction — Partie 3: Tubes en polyoléfines
ISO/FDIS
13844
*Systèmes de canalisations en plastiques
— Assemblages par emboîture à bague
d’étanchéité en élastomère pour les tubes
en plastiques — Méthode d’essai pour
l’étanchéité sous pression négative,
déviation angulaire et déformation
ISO/FDIS
*Systèmes de canalisations en plastiques
— Assemblages par emboîture à bague
167
TC 215
ISO/FDIS
22077-1
*Informatique de santé — Format de la
forme d’onde médicale — Partie 1: Règles
d’encodage
TC 221
Produits géosynthétiques
ISO/FDIS
10318-1
*Géosynthétiques — Partie 1: Termes et
définitions
ISO/FDIS
10318-2
*Géosynthétiques — Partie 2: Symboles
et pictogrammes
TC 238
Biocombustibles solides
ISO/FDIS
16948
*Biocombustibles solides — Détermination
de la teneur totale en carbone, hydrogène
et azote
ISO/FDIS
16968
*Biocombustibles solides — Détermination
des éléments mineurs
IULTCS
Union internationale des sociétés de
techniciens et chimistes du cuir
ISO/FDIS
17070
*Cuir — Essais chimiques —
Détermination de la teneur en isomères de
monochlorophénol, dichlorophénol,
trichlorophénol, tétrachlorophénol et en
pentachlorophénol
ISO/FDIS
17228
*Cuir — Essais de solidité des coloris —
Changement de couleur avec
vieillissement accéléré
JTC 1
ISO/IEC/IEEE *Ingénierie des systèmes et du logiciel —
FDIS 23026
Ingénierie et gestion de sites web pour les
systèmes, logiciels et services
d’information
ISO/IEC/IEEE *Ingénierie du logiciel et des systèmes —
FDIS 26531
Management du contenu pour le cycle de
vie d’un produit, documentation du
management du service et de l’utilisateur
ISO/IEC 14496-*Technologies de l’information — Codage
12:2012/FDAm des objets audiovisuels — Partie 12:
d3
Format ISO de base pour les fichiers
médias — Amendement 3: Prise en
charge audio augmentée et autres
améliorations
ISO/IEC 15444-*Technologies de l’information — Système
12:2012/FDAm de codage d’images JPEG 2000 — Partie
d3
12: Format ISO de base pour les fichiers
médias — Amendement 3: .
4:2014/FDAmd Technologies vidéo MPEG — Partie 4:
2
Bibliothèque d’outils vidéo —
Amendement 2: Descriptions des FU et
FN pour HEVC
ISO/IEC FDIS *Technologies de l’information — Codage
23008-5
à haute efficacité et livraison des médias
dans des environnements hétérogènes —
Partie 5: Essais de conformité du codage
video à haute efficacité et logiciel de
référence
23008-8
à haute efficacité et livraison des medias
Partie 8: Spécification de conformité du
codage video à haute efficacité
23008-11
à haute efficacité et livraison des medias
Partie 11: Informations de composition
pour le transport des medias MPEG
ISO/IEC FDIS *Technologies de l’information pour
20006-2
l’apprentissage, l’éducation et la formation
— Modèle d’information pour les
compétences — Partie 2: Modèle
d’information des niveaux de compétence
ISO/IEC 19794-*Technologies de l’information — Formats
1:2011/FDAmd d’échange de données biométriques —
2
Partie 1: Cadre — Amendement 2: Titre
manque
ISO/IEC FDIS *Technologies de l’information — Qualité
29794-6
d’échantillon biométrique — Partie 6:
Image d’iris
NORMES PUBLIEES
Nouvelles Normes internationales publiées entre le 1er
octobre 2014 et le 31 octobre 2014.
anglais seulement
PC 259
Externalisation
ISO
37500:2014
*Lignes directrices relatives à
l’externalisation
TC 8
ISO 173252:2014
Protection de l’environnement marin —
Barrages de rétention de pétrole — Partie
2: Exigences de résistance et de
168
performance
ISO
18309:2014
*Navires et technologie marine —
Dimensionnement et choix d’un
incinérateur — Lignes directrices
ISO
17907:2014
Emplacements pour point d’amarrage
unique pour les navires-citernes
conventionnels
ISO
18289:2014
Vaisseaux d’ingénierie de navigation en
eau peu profonde — Treuils d’ancres
ISO
18296:2014
Treuils de déplacement des navires
ISO
16556:2014
*Grands yachts — Équipement de pont —
Mouillage
TC 17
Acier
ISO 68317:2014
Aciers pour traitement thermique, aciers
alliés et aciers pour décolletage — Partie
17: Aciers pour roulements
TC 20
ISO
27027:2014
*Aéronautique et espace — Contacteursdisjoncteurs statiques commandés à
distance — Exigences générales de
performance
ISO
16919:2014
*Systèmes de transfert des informations et
données spatiales — Exigences pour les
organismes d’audit et de certification des
référentiels numériques potentiellement de
confiance
TC 22
Véhicules routiers
ISO 150071:2014
Véhicules routiers — Mesurage du
comportement visuel du conducteur en
relation avec les systèmes de commande
et d’information du transport — Partie 1:
Définitions et paramètres
TC 23
forestiers
ISO 117833:2014
forestiers — Réseaux de commande et de
communication de données en série —
Partie 3: Couche liaison de données
TC 28
ISO
10370:2014
*Produits pétroliers — Détermination du
résidu de carbone — Méthode micro
ISO
17315:2014
*Produits pétroliers et autres liquides —
Éthanol — Dosage de l’acidité totale par
titration potentiométrique
TC 29
Petit outillage
ISO 266231:2014
Interfaces à cône polygonal avec face
d’appui — Partie 1: Dimensions et
désignation des queues
ISO 266232:2014
Interfaces à cône polygonal avec face
d’appui — Partie 2: Dimensions et
désignation des nez de broche
TC 31
ISO 149601:2014
Pneumatiques sans chambre — Valves et
composants — Partie 1: Méthodes d’essai
ISO 149602:2014
Pneumatiques sans chambre — Valves et
composants — Partie 2: Méthodes d’essai
pour les valves à visser
TC 34
ISO
11133:2014
*Microbiologie des aliments, des aliments
pour animaux et de l’eau — Préparation,
production, stockage et essais de
performance des milieux de culture
ISO
22004:2014
Systèmes de management de la sécurité
des denrées alimentaires —
Recommandations pour l’application de
l’ISO 22000
ISO 2451:2014 *Fèves de cacao — Spécifications
TC 35
ISO 4618:2014 *Peintures et vernis — Termes et
définitions
ISO 164743:2013
Peintures et vernis — Méthodes
d’exposition à des sources lumineuses de
laboratoire — Partie 3: Lampes
fluorescentes UV
TC 36
Cinématographie
ISO 71:2014
*Cinématographie — Enregistrement
sonore photographique négatif 16 mm sur
film cinématographique de 16 mm, 35/16
mm et 35/32 mm — Emplacement et
dimensions
ISO 7832:2014 *Cinématographie — Facteur de sortie
photoélectrique des films d’essai de
niveau sonore de type optique —
Mesurage et étalonnage
TC 37
Terminologie et autres ressources
langagières et ressources de contenu
ISO 241561:2014
*Notations graphiques pour la
modélisation des concepts en terminologie
et ses relations avec UML — Partie 1:
Lignes directrices pour l’application de la
notation UML dans le travail
terminologique
TC 39
Machines-outils
ISO/TR
*Machines-outils — Lignes directrices et
169
Peintures et vernis
17529:2014
appréciation du risque pour les machines
d’électro-érosion
TC 45
d’élastomères
ISO 218092:2014
Industries du pétrole et du gaz naturel —
Revêtements externes des conduites
enterrées et immergées utilisées dans les
systèmes de transport par conduites —
Partie 2: Revêtements monocouche à
base de résine époxydique appliquée par
fusion
TC 69
ISO 225148:2014
Méthodes statistiques dans la gestion de
processus — Aptitude et performance —
Partie 8: Aptitude machine d’un procédé
de production multimodal
TC 83
Matériel et équipements de sports et
autres activités de loisirs
ISO 815-1:2014Caoutchouc vulcanisé ou thermoplastique
— Détermination de la déformation
rémanente après compression — Partie 1:
À températures ambiantes ou élevées
ISO 1656:2014 *Caoutchouc brut naturel et latex de
caoutchouc naturel — Dosage de l’azote
ISO 2302:2014 *Caoutchouc isobutène-isoprène (IIR) —
Méthode d’évaluation
TC 46
Information et documentation
ISO 101612:2014
*Information et documentation —
Interconnexion de systèmes ouverts (OSI)
— Spécification du protocole d’application
pour les prêts entre bibliothèques —
Partie 2: Proforma d’établissement de
conformité pour la mise en oeuvre du
protocole (PICS)
ISO
21127:2014
Information et documentation — Une
ontologie de référence pour l’échange
d’informations du patrimoine culturel
ISO/TR
26122:2008
Information et documentation — Analyse
des processus pour la gestion des
informations et documents d’activité
TC 51
Plateaux de chargement pour transport
et manutention directe de charges
unitaires
ISO
18613:2014
Palettes pour la manutention et le
transport des marchandises — Réparation
des palettes plates en bois
TC 58
Bouteilles à gaz
ISO 3807:2013 Bouteilles à gaz — Bouteilles d’acétylène
— Exigences fondamentales et essais de
type
ISO
10297:2014
Bouteilles à gaz — Robinets de bouteilles
— Spécifications et essais de type
TC 60
Engrenages
ISO/TR 15144- *Calcul de la capacité de charge aux
2:2014
micropiqûres des engrenages cylindriques
à dentures droite et hélicoïdale — Partie
2: Exemples de calcul pour micropiqûres
TC 61
Plastiques
ISO 178551:2014
Plastiques — Polyéthylène (PE) pour
moulage et extrusion — Partie 1: Système
de désignation et base de spécification
TC 67
ISO 9462:2014 Fixations de skis alpins — Exigences et
méthodes d’essai
ISO
13992:2014
Fixations pour le ski alpin de randonnée
— Exigences et méthodes d’essai
TC 84
Dispositifs pour administration des
produits médicaux et cathéters
ISO
11070:2014
Introducteurs, dilatateurs et guides
intravasculaires stériles non réutilisables
TC 87
Liège
ISO 7322:2014 Aggloméré composé de liège — Méthodes
d’essai
TC 94
ISO 169001:2014
Appareils de protection respiratoire —
Méthodes d’essai et équipement d’essai
— Partie 1: Détermination des fuites vers
l’intérieur
TC 96
suspendue
ISO 99282:2014
*Appareils de levage à charge suspendue
— Manuel à l’usage des opérateurs —
Partie 2: Grues mobiles
ISO 116622:2014
*Grues mobiles — Détermination
expérimentale des performances des
grues — Partie 2: Compétence structurale
sous le chargement statique
TC 106
ISO
13116:2014
Médecine bucco-dentaire — Méthodes de
détermination de la radio opacité des
matériaux
ISO 9680:2014 Médecine bucco-dentaire — Appareils
d’éclairage
ISO
170
Médecine bucco-dentaire — Vernis fluorés
17730:2014
TC 110
ISO 229159:2014
Chariots de manutention — Vérification de
la stabilité — Partie 9: Chariots travaillant
en porte-à-faux avec mât manutentionnant
des conteneurs de 6 m (20 ft) de long et
plus
TC 114
Horlogerie
ISO
10552:2014
Instruments horaires — Couronnes et
tubes étanches — Constructions et
dimensions
TC 121
respiratoire
ISO 5367:2014 Matériel d’anesthésie et de réanimation
respiratoire — Systèmes respiratoires et
raccords
ISO 8836:2014 Sondes d’aspiration pour les voies
respiratoires
TC 126
ISO
10315:2013
Cigarettes — Dosage de la nicotine dans
les condensats de fumée — Méthode par
chromatographie en phase gazeuse
ISO/TR 19478- *Paramètres de fumage ISO et Santé
1:2014
Canada Intense — Partie 1: Résultats
d’une étude internationale de fumage sur
machine
TC 131
pneumatiques
ISO 63583:2014
Transmissions pneumatiques —
Détermination des caractéristiques de
débit des composants — Partie 3:
Méthode de calcul des caractéristiques de
débit stationnaire des assemblages
TC 145
Symboles graphiques et pictogrammes
ISO 91863:2014
Symboles graphiques — Méthodes
d’essai — Partie 3: Méthode pour les
essais de reconnaissabilité des symboles
TC 149
Cycles
ISO 42104:2014
*Cycles — Exigences de sécurité des
bicyclettes — Partie 4: Méthodes d’essai
de freinage
ISO 42106:2014
du cadre et de la fourche
ISO 42108:2014
des pédales et du pédalier
TC 150
Implants chirurgicaux
ISO 142421:2014
Implants chirurgicaux — Usure des
prothèses totales de l’articulation de la
hanche — Partie 1: Paramètres de charge
et de déplacement pour machines d’essai
d’usure et conditions environnementales
correspondantes d’essai
ISO 142433:2014
Implants chirurgicaux — Usure des
prothèses totales de l’articulation du
genou — Partie 3: Paramètres de charge
et de déplacement pour machines d’essai
d’usure avec contrôle de déplacement et
conditions environnementales
correspondantes d’essai
TC 164
ISO
16842:2014
Matériaux métalliques — Tôles et bandes
— Méthode d’essai de traction biaxiale sur
éprouvette cruciforme
TC 168
Prothèses et orthèses
ISO 85494:2014
Prothèses et orthèses — Vocabulaire —
Partie 4: Termes relatifs à l’amputation de
membres
TC 172
ISO 90224:2014
Brouillard salin
ISO
17328:2014
Optique et photonique — Matériaux et
composants optiques — Méthode d’essai
de l’indice de réfraction des matériaux
optiques infrarouges
ISO 144906:2014
d’essai pour systèmes télescopiques —
Partie 6: Méthodes d’essai de l’indice de
lumière parasite
TC 173
ISO 71761:2014
Fauteuils roulants — Partie 1:
Détermination de la stabilité statique
ISO
17069:2014
*Conception accessible — Considérations
et produits d’assistance pour réunion
accessible
TC 174
ISO
11427:2014
Joaillerie, bijouterie — Dosage de l’argent
dans les alliages d’argent pour la
bijouterie-joaillerie — Méthode
volumétrique (potentiométrique) utilisant le
bromure de potassium
TC 181
Sécurité des jouets
ISO 81244:2014
*Sécurité des jouets — Partie 4:
Balançoires, glissoires et jouets à activité
similaire à usage domestique familial
171
intérieur et extérieur
TC 215
TC 183
Minerais et concentrés de cuivre, de
plomb, de zinc et de nickel
ISO 135471:2014
*Concentrés sulfurés de cuivre, de plomb
et de zinc — Dosage de l’arsenic — Partie
1: Méthode par digestion acide, coprécipitation avec le fer et plasma induit
par haute fréquence
ISO/TR 14639- *Informatique de santé — Feuille de route
2:2014
de l’architecture de santé électronique
fondée sur la capacité — Partie 2:
Composants architecturaux et modèle de
maturité
TC 184
intégration
ISO 224001:2014
*Systèmes d’automatisation et intégration
— Indicateurs de la performance clé pour
le management des opérations de
fabrication — Partie 1: Aperçu, concepts
et terminologie
TC 190
Qualité du sol
ISO 112683:2014
*Qualité du sol — Effets des polluants visà-vis des vers de terre — Partie 3: Lignes
directrices relatives à la détermination des
effets sur site
TC 198
Stérilisation des produits de santé
ISO 111401:2014
Stérilisation des produits de santé —
Indicateurs chimiques — Partie 1:
Exigences générales
TC 202
Analyse par microfaisceaux
ISO
14594:2014
*Analyse par microfaisceaux — Analyse
par microsonde électronique (Microsonde
de Castaing) — Lignes directrices pour la
détermination des paramètres
expérimentaux pour la spectrométrie à
dispersion de longueur d’onde
ISO
14595:2014
*Analyse par microfaisceaux —
Microanalyse par sonde à électrons —
Lignes directrices pour les spécifications
des matériaux de référence certifiés
(CRM)
TC 204
ISO/TS
16785:2014
*Perception du télépéage — Définition de
l’interface entre l’équipement à bord à
communications dédiées à courte portée
(DSRC-OBE) et les dispostifs externes
embarqués
ISO/TR 17465- *Systèmes intelligents de transport —
1:2014
Coopérative ITS — Partie 1: Termes et
définitions
ISO 292812:2013/Amd
1:2014
*Systèmes intelligents de transport —
Accès aux communications des services
mobiles terrestres (CALM) — Réseautique
non-IP — Partie 2: Support pour systèmes
hérités — Amendement 1
TC 217
Cosmétiques
ISO
15819:2014
Cosmétiques — Méthodes analytiques —
Nitrosamines: Recherche et dosage de la
N-nitrosodiéthanolamine (NDELA) dans
les produits cosmétiques par CLHP-SMSM
TC 218
Bois
ISO 130611:2014
*Propriétés physiques et mécaniques du
bois — Méthodes d’essais sur échantillons
de bois sans défauts — Partie 1:
Détermination de la teneur en humidité en
vue des essais physiques et mécaniques
ISO 130612:2014
*Propriétés physiques et mécaniques du
bois — Méthodes d’essais sur échantillons
de bois sans défauts — Partie 2:
Détermination de la masse volumique en
vue des essais physiques et mécaniques
TC 223
Sécurité sociétale
ISO
22300:2012
Sécurité sociétale — Terminologie
TC 228
ISO
13687:2014
*Tourisme et services connexes — Ports
de plaisance — Exigences minimales
TC 242
Management de l’énergie
ISO
50003:2014
*Systèmes de management de l’énergie
— Exigences pour les organismes
procédant à l’audit et à la certification de
systèmes de management de l’énergie
TC 261
Fabrication additive
ISO 172963:2014
Fabrication additive — Principes généraux
— Partie 3: Principales caractéristiques et
méthodes d’essai correspondantes
ISO 172964:2014
Fabrication additive — Principes généraux
— Partie 4: Vue d’ensemble des
échanges de données
CASCO
Comité pour l’évaluation de la
conformité
ISO/IEC TS
*Évaluation de la conformité — Exigences
17021-7:2014 pour les organismes procédant à l’audit et
à la certification des systèmes de
management — Partie 7: Exigences de
compétence pour l’audit et la certification
des systèmes de management de la
172
JTC 1
sécurité du trafic routier
TC 2
ISO 8752:2009
3:2008/Cor
1:2014
Spécification des contraintes — Partie 3:
— Rectificatif technique 1
ISO/IEC 10373-*Cartes d’identification — Méthodes
5:2014
d’essai — Partie 5: Cartes à mémoire
optique
ISO
10669:1999
Fixations
(reconfirmée)
ISO
13337:2009
ISO 77212:1990
ISO/IEC 11694-*Cartes d’identification — Cartes à
5:2014
mémoire optique — Méthode
d’enregistrement linéaire — Partie 5:
Format de données pour l’échange
d’informations pour les applications
utilisant l’ISO/IEC 11694-4
ISO
10644:2009
ISO/IEC TR
118019901:2014
ISO 82541:2009
(reconfirmée)
ISO
10673:2009
TC 6
*Technologies de l’information — Câblage
générique des locaux d’utilisateurs —
Partie 9901:
ISO/IEC 24775-*Technologie de l’information —
1:2014
Management du stockage — Partie 1:
TC 8
ISO
28000:2007
2:2014
ISO
15736:2006
(reconfirmée)
ISO
18813:2006
(reconfirmée)
4:2014
TC 17
Acier
ISO/IEC
27000:2014
ISO 94441:2009
3:2014
Technologies de l’information —
Techniques de sécurité — Systèmes de
management de la sécurité de
l’information — Vue d’ensemble et
vocabulaire
ISO 94442:2009
TC 20
ISO/IEC 14496-*Technologies de l’information — Codage
18:2004/Amd des objets audiovisuels — Partie 18:
1:2014
Compression et transmission de polices
de caractères — Amendement 1:
Sémantique de decoderSpecificInfo mise
à jour et description des données de
police pour ISOBMFF
ISO/IEC
17788:2014
ISO/IEC
17789:2014
Informatique en nuage — Vue d’ensemble
et vocabulaire
Informatique en nuage — Architecture de
référence
ISO 80562:1988
(reconfirmée)
TC 28
TC 29
Petit outillage
ISO 60311:1999
(reconfirmée)
NORMES CONFIRMEES
ans:
ISO 63441:1998
(reconfirmée)
ISO 63442:1998
(reconfirmée)
173
ISO
15636:2003
(reconfirmée)
ISO 672112:2009
TC 34
ISO
21509:2006
ISO 660:2009
ISO
25217:2009
ISO
16931:2009
ISO
25762:2009
ISO
22959:2009
TC 38
(reconfirmée)
Textiles
ISO 105B07:2009
ISO 105F02:2009
ISO 105F09:2009
ISO 105G02:1993
(reconfirmée)
TC 44
ISO 2560:2009
ISO 63832:1983
(reconfirmée)
ISO 77651:1988
(reconfirmée)
ISO 77652:1994
(reconfirmée)
ISO 85102:2006
(reconfirmée)
ISO
14631:1999
(reconfirmée)
ISO 38341:2005
(reconfirmée)
ISO
17087:2006
(reconfirmée)
ISO 38342:2005
(reconfirmée)
ISO
19212:2006
(reconfirmée)
ISO 38343:2005
(reconfirmée)
ISO 61:1976
(reconfirmée)
ISO 38344:2005
(reconfirmée)
ISO
15607:2003
(reconfirmée)
ISO 156094:2009
ISO
15611:2003
(reconfirmée)
ISO 156146:2006
(reconfirmée)
ISO
17663:2009
ISO
10082:1999
(reconfirmée)
ISO 145261:1999
(reconfirmée)
ISO 228271:2005
(reconfirmée)
ISO 145262:1999
(reconfirmée)
ISO 228272:2005
(reconfirmée)
ISO 145263:1999
(reconfirmée)
TC 61
Plastiques
(reconfirmée)
ISO 67213:1994
(reconfirmée)
ISO 145271:1999
ISO 145272:1999
(reconfirmée)
174
ISO 145273:1999
(reconfirmée)
TC 63
Récipients en verre
(reconfirmée)
ISO 91001:2005
(reconfirmée)
ISO 145281:1999
(reconfirmée)
ISO 91002:2005
(reconfirmée)
ISO 145282:1999
(reconfirmée)
ISO 91003:2005
(reconfirmée)
ISO 145283:1999
(reconfirmée)
ISO 91005:2005
(reconfirmée)
ISO 145291:1999
(reconfirmée)
ISO 91006:2005
(reconfirmée)
ISO 145292:1999
(reconfirmée)
ISO 91007:2005
(reconfirmée)
ISO 145293:1999
(reconfirmée)
ISO 910010:2005
(reconfirmée)
ISO 145301:1999
(reconfirmée)
ISO 910011:2005
(reconfirmée)
ISO 145302:1999
(reconfirmée)
ISO 910012:2005
(reconfirmée)
ISO 145303:1999
(reconfirmée)
ISO 910013:2005
(reconfirmée)
ISO
14849:1999
(reconfirmée)
ISO 910014:2005
(reconfirmée)
ISO
14898:1999
TC 67
ISO
15038:1999
(reconfirmée)
ISO 152521:1999
(reconfirmée)
ISO 239361:2009
ISO 152522:1999
(reconfirmée)
ISO
10417:2004
(reconfirmée)
ISO 152523:1999
(reconfirmée)
ISO
10432:2004
(reconfirmée)
ISO 216271:2009
ISO 170783:2009
ISO 216272:2009
ISO
17824:2009
ISO 216273:2009
TC 69
ISO 28591:1999
(reconfirmée)
ISO 285910:2006
(reconfirmée)
ISO 39515:2006
(reconfirmée)
ISO 527-5:2009
ISO 1889:2009
ISO 1890:2009
ISO
15034:1999
(reconfirmée)
ISO
15040:1999
(reconfirmée)
ISO
18414:2006
175
(reconfirmée)
TC 87
Liège
1:2005
ISO
21128:2006
(reconfirmée)
TC 112
TC 89
Panneaux à base de bois
Technique du vide
TC 113
Hydrométrie
TC 127
ISO
16978:2003
(reconfirmée)
ISO 102631:2009
ISO
16979:2003
(reconfirmée)
ISO 102632:2009
ISO
16983:2003
(reconfirmée)
ISO 102633:2009
ISO
16984:2003
(reconfirmée)
ISO 102634:2009
ISO
16999:2003
(reconfirmée)
ISO 102635:2009
ISO
20585:2005
(reconfirmée)
ISO 102636:2009
TC 92
Sécurité au feu
ISO
17063:2003
(reconfirmée)
TC 135
Essais non destructifs
ISO
10375:1997
(reconfirmée)
ISO
12710:2002
(reconfirmée)
(reconfirmée)
ISO 56582:2006
TC 96
suspendue
ISO 43012:2009
ISO
11661:1998
(reconfirmée)
ISO
18175:2004
TC 108
surveillance
ISO 148391:2002
(reconfirmée)
ISO 140961:2005
(reconfirmée)
ISO
18649:2004
(reconfirmée)
ISO
20807:2004
(reconfirmée)
ISO 202833:2006
(reconfirmée)
TC 138
des fluides
ISO 222661:2009
TC 146
Qualité de l’air
ISO 130912:2003
(reconfirmée)
ISO
13753:1998
(reconfirmée)
ISO
16740:2005
(reconfirmée)
ISO 14835-
(reconfirmée)
TC 153
Robinetterie
176
ISO 135653:1998
(reconfirmée)
TC 216
Chaussure
ISO
19954:2003
(reconfirmée)
TC 226
Matériaux pour la production de
l’aluminium de première fusion
ISO 80073:2003
(reconfirmée)
TC 173
ISO 717621:2009
ISO 168404:2009
TC 178
Ascenseurs, escaliers mécaniques et
trottoirs roulants
ISO
20203:2005
(reconfirmée)
TC 227
Ressorts
ISO 7465:2007
ISO
26909:2009
ISO
14798:2009
ISO 269101:2009
TC 188
Petits navires
TC 228
ISO 145092:2006
(reconfirmée)
ISO
11107:2009
ISO
10862:2009
ISO
11121:2009
TC 193
Gaz naturel
JTC 1
ISO 101011:1993
(reconfirmée)
ISO/IEC 293412:2008
ISO 101012:1993
(reconfirmée)
ISO/IEC 293413-2:2008
ISO 101013:1993
(reconfirmée)
ISO/IEC 293413-3:2008
ISO
11541:1997
(reconfirmée)
ISO/IEC 293413-11:2008
ISO
14111:1997
(reconfirmée)
ISO/IEC 293413-12:2008
TC 209
ISO/IEC 293413-13:2008
ISO 146981:2003
ISO/IEC 293414-12:2008
ISO 146982:2003
ISO/IEC 144434:2008
TC 213
Spécifications et vérification
dimensionnelles et géométriques des
produits
ISO/IEC 156933:2009
NORMES ANNULEES
177
Période du 1er octobre 2014 au 31 octobre 2014.
TC 31
ISO
14960:2004
TC 61
Plastiques
ISO 18721:1993
TC 110
ISO
10525:1997
TC 127
ISO/TS 20474- (remplacée par )
14:2008
TC 131
pneumatiques
ISO 6358:1989 (remplacée par ISO 6358-1:2013, ISO
6358-2:2013, ISO 6358-3:2014)
TC 218
Bois
178

projets de normes diffuses

Transcription

Documents pareils

politique sincro

27E72702 - BBA Emballages

Sécurité - Certification ISO 18001

Sportflex Impronta Pista Épaisseur 6 mm - MONDO

Le système de management QUALITÉ Les systèmes

importer au format pdf

Fiche technique GEO™

silicate de sodium > additif

Bag Tag Top PET 30µm

L`accréditation des laboratoires selon l`ISO 17025